1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2016 Marvell Technology Group Ltd.
4 * Copyright (C) 2020 Sartura Ltd.
5 *
6 * Device Tree file for IEI Puzzle-M801
7 */
8
9#include "armada-8040.dtsi"
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/leds/common.h>
13
14/ {
15	model = "IEI-Puzzle-M801";
16	compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806";
17
18	aliases {
19		ethernet0 = &cp0_eth0;
20		ethernet1 = &cp1_eth0;
21		ethernet2 = &cp0_eth1;
22		ethernet3 = &cp0_eth2;
23		ethernet4 = &cp1_eth1;
24		ethernet5 = &cp1_eth2;
25	};
26
27	chosen {
28		stdout-path = "serial0:115200n8";
29	};
30
31	memory@0 {
32		device_type = "memory";
33		reg = <0x0 0x0 0x0 0x80000000>;
34	};
35
36	/* Regulator labels correspond with schematics */
37	v_3_3: regulator-3-3v {
38		compatible = "regulator-fixed";
39		regulator-name = "v_3_3";
40		regulator-min-microvolt = <3300000>;
41		regulator-max-microvolt = <3300000>;
42		regulator-always-on;
43		status = "okay";
44	};
45
46	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
47		compatible = "regulator-fixed";
48		enable-active-high;
49		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
50		pinctrl-names = "default";
51		pinctrl-0 = <&cp0_xhci_vbus_pins>;
52		regulator-name = "v_5v0_usb3_hst_vbus";
53		regulator-min-microvolt = <5000000>;
54		regulator-max-microvolt = <5000000>;
55		status = "okay";
56	};
57
58	v_vddo_h: regulator-1-8v {
59		compatible = "regulator-fixed";
60		regulator-name = "v_vddo_h";
61		regulator-min-microvolt = <1800000>;
62		regulator-max-microvolt = <1800000>;
63		regulator-always-on;
64		status = "okay";
65	};
66
67	sfp_cp0_eth0: sfp-cp0-eth0 {
68		compatible = "sff,sfp";
69		i2c-bus = <&sfpplus0_i2c>;
70		los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
71		mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
72		tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
73		tx-fault-gpios = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
74		maximum-power-milliwatt = <3000>;
75	};
76
77	sfp_cp1_eth0: sfp-cp1-eth0 {
78		compatible = "sff,sfp";
79		i2c-bus = <&sfpplus1_i2c>;
80		los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
81		mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
82		tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
83		tx-fault-gpios = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
84		maximum-power-milliwatt = <3000>;
85	};
86
87	leds {
88		compatible = "gpio-leds";
89		status = "okay";
90		pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>;
91		pinctrl-names = "default";
92
93		led-0 {
94			/* SFP+ port 2: Activity */
95			function = LED_FUNCTION_LAN;
96			function-enumerator = <0>;
97			gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>;
98		};
99
100		led-1 {
101			/* SFP+ port 1: Activity */
102			function = LED_FUNCTION_LAN;
103			function-enumerator = <1>;
104			gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>;
105		};
106
107		led-2 {
108			/* SFP+ port 2: 10 Gbps indicator */
109			function = LED_FUNCTION_LAN;
110			function-enumerator = <2>;
111			gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>;
112		};
113
114		led-3 {
115			/* SFP+ port 2: 1 Gbps indicator */
116			function = LED_FUNCTION_LAN;
117			function-enumerator = <3>;
118			gpios = <&cp1_gpio1 8 GPIO_ACTIVE_LOW>;
119		};
120
121		led-4 {
122			/* SFP+ port 1: 10 Gbps indicator */
123			function = LED_FUNCTION_LAN;
124			function-enumerator = <4>;
125			gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
126		};
127
128		led-5 {
129			/* SFP+ port 1: 1 Gbps indicator */
130			function = LED_FUNCTION_LAN;
131			function-enumerator = <5>;
132			gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>;
133		};
134
135		led-6 {
136			function = LED_FUNCTION_DISK;
137			linux,default-trigger = "disk-activity";
138			gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
139		};
140
141	};
142};
143
144&ap_sdhci0 {
145	bus-width = <8>;
146	/*
147	 * Not stable in HS modes - phy needs "more calibration", so add
148	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
149	 */
150	marvell,xenon-phy-slow-mode;
151	no-1-8-v;
152	no-sd;
153	no-sdio;
154	non-removable;
155	status = "okay";
156	vqmmc-supply = <&v_vddo_h>;
157};
158
159&ap_thermal_cpu1 {
160	trips {
161		cpu_active: cpu-active {
162			temperature = <44000>;
163			hysteresis = <2000>;
164			type = "active";
165		};
166	};
167	cooling-maps {
168		fan-map {
169			trip = <&cpu_active>;
170			cooling-device = <&chassis_fan_group0 64 THERMAL_NO_LIMIT>,
171					<&chassis_fan_group1 64 THERMAL_NO_LIMIT>;
172		};
173	};
174};
175
176&i2c0 {
177	clock-frequency = <100000>;
178	status = "okay";
179
180	rtc@32 {
181		compatible = "epson,rx8010";
182		reg = <0x32>;
183	};
184};
185
186&spi0 {
187	status = "okay";
188	flash@0 {
189		#address-cells = <0x1>;
190		#size-cells = <0x1>;
191		compatible = "jedec,spi-nor";
192		reg = <0x0>;
193		spi-max-frequency = <20000000>;
194		partition@u-boot {
195			label = "u-boot";
196			reg = <0x00000000 0x001f0000>;
197		};
198		partition@u-boot-env {
199			label = "u-boot-env";
200			reg = <0x001f0000 0x00010000>;
201		};
202		partition@ubi1 {
203			label = "ubi1";
204			reg = <0x00200000 0x03f00000>;
205		};
206		partition@ubi2 {
207			label = "ubi2";
208			reg = <0x04100000 0x03f00000>;
209		};
210	};
211};
212
213&uart0 {
214	status = "okay";
215	pinctrl-0 = <&uart0_pins>;
216	pinctrl-names = "default";
217};
218
219&uart1 {
220	status = "okay";
221	/* IEI WT61P803 PUZZLE MCU Controller */
222	mcu {
223		compatible = "iei,wt61p803-puzzle";
224		current-speed = <115200>;
225		enable-beep;
226
227		leds {
228			compatible = "iei,wt61p803-puzzle-leds";
229			#address-cells = <1>;
230			#size-cells = <0>;
231
232			led@0 {
233				reg = <0>;
234				function = LED_FUNCTION_POWER;
235				color = <LED_COLOR_ID_BLUE>;
236			};
237		};
238
239		hwmon {
240			compatible = "iei,wt61p803-puzzle-hwmon";
241			#address-cells = <1>;
242			#size-cells = <0>;
243
244			chassis_fan_group0:fan-group@0 {
245				#cooling-cells = <2>;
246				reg = <0x00>;
247				cooling-levels = <64 102 170 230 250>;
248			};
249
250			chassis_fan_group1:fan-group@1 {
251				#cooling-cells = <2>;
252				reg = <0x01>;
253				cooling-levels = <64 102 170 230 250>;
254			};
255		};
256	};
257};
258
259&cp0_rtc {
260	status = "disabled";
261};
262
263&cp0_i2c0 {
264	clock-frequency = <100000>;
265	pinctrl-names = "default";
266	pinctrl-0 = <&cp0_i2c0_pins>;
267	status = "okay";
268
269	sfpplus_gpio: gpio@21 {
270		compatible = "nxp,pca9555";
271		reg = <0x21>;
272		gpio-controller;
273		#gpio-cells = <2>;
274	};
275
276	eeprom@54 {
277		compatible = "atmel,24c04";
278		reg = <0x54>;
279	};
280};
281
282&cp0_i2c1 {
283	clock-frequency = <100000>;
284	pinctrl-names = "default";
285	pinctrl-0 = <&cp0_i2c1_pins>;
286	status = "okay";
287
288	i2c-switch@70 {
289		compatible = "nxp,pca9544";
290		#address-cells = <1>;
291		#size-cells = <0>;
292		reg = <0x70>;
293
294		sfpplus0_i2c: i2c@0 {
295			#address-cells = <1>;
296			#size-cells = <0>;
297			reg = <0>;
298		};
299
300		sfpplus1_i2c: i2c@1 {
301			#address-cells = <1>;
302			#size-cells = <0>;
303			reg = <1>;
304		};
305	};
306};
307
308&cp0_uart1 {
309	pinctrl-names = "default";
310	pinctrl-0 = <&cp0_uart1_pins>;
311	status = "okay";
312};
313
314&cp0_mdio {
315	#address-cells = <1>;
316	#size-cells = <0>;
317
318	status = "okay";
319
320	ge_phy2: ethernet-phy@0 {
321		reg = <0>;
322	};
323
324	ge_phy3: ethernet-phy@1 {
325		reg = <1>;
326	};
327};
328
329&cp0_pcie0 {
330	pinctrl-names = "default";
331	pinctrl-0 = <&cp0_pcie_pins>;
332	num-lanes = <1>;
333	num-viewport = <8>;
334	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
335	ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
336	phys = <&cp0_comphy0 0>;
337	phy-names = "cp0-pcie0-x1-phy";
338	status = "okay";
339};
340
341&cp0_pinctrl {
342	cp0_ge_mdio_pins: ge-mdio-pins {
343		marvell,pins = "mpp32", "mpp34";
344		marvell,function = "ge";
345	};
346	cp0_i2c1_pins: i2c1-pins {
347		marvell,pins = "mpp35", "mpp36";
348		marvell,function = "i2c1";
349	};
350	cp0_i2c0_pins: i2c0-pins {
351		marvell,pins = "mpp37", "mpp38";
352		marvell,function = "i2c0";
353	};
354	cp0_uart1_pins: uart1-pins {
355		marvell,pins = "mpp40", "mpp41";
356		marvell,function = "uart1";
357	};
358	cp0_xhci_vbus_pins: xhci0-vbus-pins {
359		marvell,pins = "mpp47";
360		marvell,function = "gpio";
361	};
362	cp0_pcie_pins: pcie-pins {
363		marvell,pins = "mpp52";
364		marvell,function = "gpio";
365	};
366	cp0_sdhci_pins: sdhci-pins {
367		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
368			       "mpp60", "mpp61";
369		marvell,function = "sdio";
370	};
371	cp0_sfpplus_led_pins: sfpplus-led-pins {
372		marvell,pins = "mpp54";
373		marvell,function = "gpio";
374	};
375};
376
377&cp0_ethernet {
378	status = "okay";
379};
380
381&cp0_eth0 {
382	status = "okay";
383	phy-mode = "10gbase-r";
384	phys = <&cp0_comphy4 0>;
385	local-mac-address = [ae 00 00 00 ff 00];
386	sfp = <&sfp_cp0_eth0>;
387	managed = "in-band-status";
388};
389
390&cp0_eth1 {
391	status = "okay";
392	phy = <&ge_phy2>;
393	phy-mode = "sgmii";
394	local-mac-address = [ae 00 00 00 ff 01];
395	phys = <&cp0_comphy3 1>;
396};
397
398&cp0_eth2 {
399	status = "okay";
400	phy-mode = "sgmii";
401	phys = <&cp0_comphy1 2>;
402	local-mac-address = [ae 00 00 00 ff 02];
403	phy = <&ge_phy3>;
404};
405
406&cp0_sata0 {
407	status = "okay";
408
409	sata-port@0 {
410		phys = <&cp0_comphy2 0>;
411		phy-names = "cp0-sata0-0-phy";
412	};
413
414	sata-port@1 {
415		phys = <&cp0_comphy5 1>;
416		phy-names = "cp0-sata0-1-phy";
417	};
418};
419
420&cp0_sdhci0 {
421	broken-cd;
422	bus-width = <4>;
423	pinctrl-names = "default";
424	pinctrl-0 = <&cp0_sdhci_pins>;
425	status = "okay";
426	vqmmc-supply = <&v_3_3>;
427};
428
429&cp0_usb3_0 {
430	status = "okay";
431};
432
433&cp0_usb3_1 {
434	status = "okay";
435};
436
437&cp1_i2c0 {
438	clock-frequency = <100000>;
439	status = "disabled";
440};
441
442&cp1_i2c1 {
443	clock-frequency = <100000>;
444	status = "disabled";
445};
446
447&cp1_rtc {
448	status = "disabled";
449};
450
451&cp1_ethernet {
452	status = "okay";
453};
454
455&cp1_eth0 {
456	status = "okay";
457	phy-mode = "10gbase-r";
458	phys = <&cp1_comphy4 0>;
459	local-mac-address = [ae 00 00 00 ff 03];
460	sfp = <&sfp_cp1_eth0>;
461	managed = "in-band-status";
462};
463
464&cp1_eth1 {
465	status = "okay";
466	phy = <&ge_phy4>;
467	phy-mode = "sgmii";
468	local-mac-address = [ae 00 00 00 ff 04];
469	phys = <&cp1_comphy3 1>;
470};
471
472&cp1_eth2 {
473	status = "okay";
474	phy-mode = "sgmii";
475	local-mac-address = [ae 00 00 00 ff 05];
476	phys = <&cp1_comphy5 2>;
477	phy = <&ge_phy5>;
478};
479
480&cp1_pinctrl {
481	cp1_sfpplus_led_pins: sfpplus-led-pins {
482		marvell,pins = "mpp6", "mpp7", "mpp8", "mpp10", "mpp14", "mpp31";
483		marvell,function = "gpio";
484	};
485};
486
487&cp1_uart0 {
488	status = "disabled";
489};
490
491&cp1_comphy2 {
492	cp1_usbh0_con: connector {
493		compatible = "usb-a-connector";
494		phy-supply = <&v_5v0_usb3_hst_vbus>;
495	};
496};
497
498&cp1_usb3_0 {
499	phys = <&cp1_comphy2 0>;
500	phy-names = "cp1-usb3h0-comphy";
501	status = "okay";
502};
503
504&cp1_mdio {
505	#address-cells = <1>;
506	#size-cells = <0>;
507
508	status = "okay";
509
510	ge_phy4: ethernet-phy@1 {
511		reg = <1>;
512	};
513	ge_phy5: ethernet-phy@0 {
514		reg = <0>;
515	};
516};
517
518&cp1_pcie0 {
519	num-lanes = <2>;
520	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
521	phy-names = "cp1-pcie0-x2-lane0-phy", "cp1-pcie0-x2-lane1-phy";
522	status = "okay";
523};
524