1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (C) 2016 Marvell Technology Group Ltd.
4 *
5 * Device Tree file for MACCHIATOBin Armada 8040 community board platform
6 */
7
8#include "armada-8040.dtsi"
9
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	model = "Marvell 8040 MACCHIATOBin";
14	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
15			"marvell,armada-ap806-quad", "marvell,armada-ap806";
16
17	chosen {
18		stdout-path = "serial0:115200n8";
19	};
20
21	memory@0 {
22		device_type = "memory";
23		reg = <0x0 0x0 0x0 0x80000000>;
24	};
25
26	aliases {
27		ethernet0 = &cp0_eth0;
28		ethernet1 = &cp1_eth0;
29		ethernet2 = &cp1_eth1;
30		ethernet3 = &cp1_eth2;
31	};
32
33	/* Regulator labels correspond with schematics */
34	v_3_3: regulator-3-3v {
35		compatible = "regulator-fixed";
36		regulator-name = "v_3_3";
37		regulator-min-microvolt = <3300000>;
38		regulator-max-microvolt = <3300000>;
39		regulator-always-on;
40		status = "okay";
41	};
42
43	v_vddo_h: regulator-1-8v {
44		compatible = "regulator-fixed";
45		regulator-name = "v_vddo_h";
46		regulator-min-microvolt = <1800000>;
47		regulator-max-microvolt = <1800000>;
48		regulator-always-on;
49		status = "okay";
50	};
51
52	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
53		compatible = "regulator-fixed";
54		enable-active-high;
55		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
56		pinctrl-names = "default";
57		pinctrl-0 = <&cp0_xhci_vbus_pins>;
58		regulator-name = "v_5v0_usb3_hst_vbus";
59		regulator-min-microvolt = <5000000>;
60		regulator-max-microvolt = <5000000>;
61		status = "okay";
62	};
63
64	usb3h0_phy: usb3_phy0 {
65		compatible = "usb-nop-xceiv";
66		vcc-supply = <&v_5v0_usb3_hst_vbus>;
67	};
68
69	sfp_eth0: sfp-eth0 {
70		/* CON15,16 - CPM lane 4 */
71		compatible = "sff,sfp";
72		i2c-bus = <&sfpp0_i2c>;
73		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
74		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
75		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
76		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
77		pinctrl-names = "default";
78		pinctrl-0 = <&cp1_sfpp0_pins>;
79	};
80
81	sfp_eth1: sfp-eth1 {
82		/* CON17,18 - CPS lane 4 */
83		compatible = "sff,sfp";
84		i2c-bus = <&sfpp1_i2c>;
85		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
86		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
87		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
88		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
89		pinctrl-names = "default";
90		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
91	};
92
93	sfp_eth3: sfp-eth3 {
94		/* CON13,14 - CPS lane 5 */
95		compatible = "sff,sfp";
96		i2c-bus = <&sfp_1g_i2c>;
97		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
98		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
99		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
100		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
101		pinctrl-names = "default";
102		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
103	};
104};
105
106&uart0 {
107	status = "okay";
108	pinctrl-0 = <&uart0_pins>;
109	pinctrl-names = "default";
110};
111
112&ap_sdhci0 {
113	bus-width = <8>;
114	/*
115	 * Not stable in HS modes - phy needs "more calibration", so add
116	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
117	 */
118	marvell,xenon-phy-slow-mode;
119	no-1-8-v;
120	no-sd;
121	no-sdio;
122	non-removable;
123	status = "okay";
124	vqmmc-supply = <&v_vddo_h>;
125};
126
127&cp0_i2c0 {
128	clock-frequency = <100000>;
129	pinctrl-names = "default";
130	pinctrl-0 = <&cp0_i2c0_pins>;
131	status = "okay";
132};
133
134&cp0_i2c1 {
135	clock-frequency = <100000>;
136	pinctrl-names = "default";
137	pinctrl-0 = <&cp0_i2c1_pins>;
138	status = "okay";
139
140	i2c-switch@70 {
141		compatible = "nxp,pca9548";
142		#address-cells = <1>;
143		#size-cells = <0>;
144		reg = <0x70>;
145
146		sfpp0_i2c: i2c@0 {
147			#address-cells = <1>;
148			#size-cells = <0>;
149			reg = <0>;
150		};
151		sfpp1_i2c: i2c@1 {
152			#address-cells = <1>;
153			#size-cells = <0>;
154			reg = <1>;
155		};
156		sfp_1g_i2c: i2c@2 {
157			#address-cells = <1>;
158			#size-cells = <0>;
159			reg = <2>;
160		};
161	};
162};
163
164/* J25 UART header */
165&cp0_uart1 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&cp0_uart1_pins>;
168	status = "okay";
169};
170
171&cp0_mdio {
172	pinctrl-names = "default";
173	pinctrl-0 = <&cp0_ge_mdio_pins>;
174	status = "okay";
175
176	ge_phy: ethernet-phy@0 {
177		reg = <0>;
178	};
179};
180
181&cp0_pcie0 {
182	pinctrl-names = "default";
183	pinctrl-0 = <&cp0_pcie_pins>;
184	num-lanes = <4>;
185	num-viewport = <8>;
186	reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
187	status = "okay";
188};
189
190&cp0_pinctrl {
191	cp0_ge_mdio_pins: ge-mdio-pins {
192		marvell,pins = "mpp32", "mpp34";
193		marvell,function = "ge";
194	};
195	cp0_i2c1_pins: i2c1-pins {
196		marvell,pins = "mpp35", "mpp36";
197		marvell,function = "i2c1";
198	};
199	cp0_i2c0_pins: i2c0-pins {
200		marvell,pins = "mpp37", "mpp38";
201		marvell,function = "i2c0";
202	};
203	cp0_uart1_pins: uart1-pins {
204		marvell,pins = "mpp40", "mpp41";
205		marvell,function = "uart1";
206	};
207	cp0_xhci_vbus_pins: xhci0-vbus-pins {
208		marvell,pins = "mpp47";
209		marvell,function = "gpio";
210	};
211	cp0_sfp_1g_pins: sfp-1g-pins {
212		marvell,pins = "mpp51", "mpp53", "mpp54";
213		marvell,function = "gpio";
214	};
215	cp0_pcie_pins: pcie-pins {
216		marvell,pins = "mpp52";
217		marvell,function = "gpio";
218	};
219	cp0_sdhci_pins: sdhci-pins {
220		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
221			       "mpp60", "mpp61";
222		marvell,function = "sdio";
223	};
224	cp0_sfpp1_pins: sfpp1-pins {
225		marvell,pins = "mpp62";
226		marvell,function = "gpio";
227	};
228};
229
230&cp0_ethernet {
231	status = "okay";
232};
233
234&cp0_eth0 {
235	/* Generic PHY, providing serdes lanes */
236	phys = <&cp0_comphy4 0>;
237};
238
239&cp0_sata0 {
240	/* CPM Lane 0 - U29 */
241	status = "okay";
242};
243
244&cp0_sdhci0 {
245	/* U6 */
246	broken-cd;
247	bus-width = <4>;
248	pinctrl-names = "default";
249	pinctrl-0 = <&cp0_sdhci_pins>;
250	status = "okay";
251	vqmmc-supply = <&v_3_3>;
252};
253
254&cp0_usb3_0 {
255	/* J38? - USB2.0 only */
256	status = "okay";
257};
258
259&cp0_usb3_1 {
260	/* J38? - USB2.0 only */
261	status = "okay";
262};
263
264&cp1_ethernet {
265	status = "okay";
266};
267
268&cp1_eth0 {
269	/* Generic PHY, providing serdes lanes */
270	phys = <&cp1_comphy4 0>;
271};
272
273&cp1_eth1 {
274	/* CPS Lane 0 - J5 (Gigabit RJ45) */
275	status = "okay";
276	/* Network PHY */
277	phy = <&ge_phy>;
278	phy-mode = "sgmii";
279	/* Generic PHY, providing serdes lanes */
280	phys = <&cp1_comphy0 1>;
281};
282
283&cp1_eth2 {
284	/* CPS Lane 5 */
285	status = "okay";
286	/* Network PHY */
287	phy-mode = "2500base-x";
288	managed = "in-band-status";
289	/* Generic PHY, providing serdes lanes */
290	phys = <&cp1_comphy5 2>;
291	sfp = <&sfp_eth3>;
292};
293
294&cp1_pinctrl {
295	cp1_sfpp1_pins: sfpp1-pins {
296		marvell,pins = "mpp8", "mpp10", "mpp11";
297		marvell,function = "gpio";
298	};
299	cp1_spi1_pins: spi1-pins {
300		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
301		marvell,function = "spi1";
302	};
303	cp1_uart0_pins: uart0-pins {
304		marvell,pins = "mpp6", "mpp7";
305		marvell,function = "uart0";
306	};
307	cp1_sfp_1g_pins: sfp-1g-pins {
308		marvell,pins = "mpp24";
309		marvell,function = "gpio";
310	};
311	cp1_sfpp0_pins: sfpp0-pins {
312		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
313		marvell,function = "gpio";
314	};
315};
316
317/* J27 UART header */
318&cp1_uart0 {
319	pinctrl-names = "default";
320	pinctrl-0 = <&cp1_uart0_pins>;
321	status = "okay";
322};
323
324&cp1_sata0 {
325	/* CPS Lane 1 - U32 */
326	/* CPS Lane 3 - U31 */
327	status = "okay";
328};
329
330&cp1_spi1 {
331	pinctrl-names = "default";
332	pinctrl-0 = <&cp1_spi1_pins>;
333	status = "okay";
334
335	spi-flash@0 {
336		compatible = "st,w25q32";
337		spi-max-frequency = <50000000>;
338		reg = <0>;
339	};
340};
341
342&cp1_usb3_0 {
343	/* CPS Lane 2 - CON7 */
344	usb-phy = <&usb3h0_phy>;
345	status = "okay";
346};
347