1/*
2 * Copyright (C) 2016 Marvell Technology Group Ltd.
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPLv2 or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This library is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This library is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/*
44 * Device Tree file for Marvell Armada 8040 Development board platform
45 */
46
47#include "armada-8040.dtsi"
48
49/ {
50	model = "Marvell Armada 8040 DB board";
51	compatible = "marvell,armada8040-db", "marvell,armada8040",
52		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
53
54	chosen {
55		stdout-path = "serial0:115200n8";
56	};
57
58	memory@00000000 {
59		device_type = "memory";
60		reg = <0x0 0x0 0x0 0x80000000>;
61	};
62};
63
64&i2c0 {
65	status = "okay";
66	clock-frequency = <100000>;
67};
68
69&spi0 {
70	status = "okay";
71
72	spi-flash@0 {
73		#address-cells = <1>;
74		#size-cells = <1>;
75		compatible = "jedec,spi-nor";
76		reg = <0>;
77		spi-max-frequency = <10000000>;
78
79		partitions {
80			compatible = "fixed-partitions";
81			#address-cells = <1>;
82			#size-cells = <1>;
83
84			partition@0 {
85				label = "U-Boot";
86				reg = <0 0x200000>;
87			};
88			partition@400000 {
89				label = "Filesystem";
90				reg = <0x200000 0xce0000>;
91			};
92		};
93	};
94};
95
96/* Accessible over the mini-USB CON9 connector on the main board */
97&uart0 {
98	status = "okay";
99};
100
101
102/* CON5 on CP0 expansion */
103&cpm_pcie2 {
104	status = "okay";
105};
106
107&cpm_i2c0 {
108	status = "okay";
109	clock-frequency = <100000>;
110};
111
112/* CON4 on CP0 expansion */
113&cpm_sata0 {
114	status = "okay";
115};
116
117/* CON9 on CP0 expansion */
118&cpm_usb3_0 {
119	status = "okay";
120};
121
122/* CON10 on CP0 expansion */
123&cpm_usb3_1 {
124	status = "okay";
125};
126
127&cpm_mdio {
128	status = "okay";
129
130	phy1: ethernet-phy@1 {
131		reg = <1>;
132	};
133};
134
135&cpm_ethernet {
136	status = "okay";
137};
138
139&cpm_eth2 {
140	status = "okay";
141	phy = <&phy1>;
142	phy-mode = "rgmii-id";
143};
144
145/* CON5 on CP1 expansion */
146&cps_pcie2 {
147	status = "okay";
148};
149
150&cps_i2c0 {
151	status = "okay";
152	clock-frequency = <100000>;
153};
154
155/* CON4 on CP1 expansion */
156&cps_sata0 {
157	status = "okay";
158};
159
160/* CON9 on CP1 expansion */
161&cps_usb3_0 {
162	status = "okay";
163};
164
165/* CON10 on CP1 expansion */
166&cps_usb3_1 {
167	status = "okay";
168};
169
170&cps_mdio {
171	status = "okay";
172
173	phy0: ethernet-phy@0 {
174		reg = <0>;
175	};
176};
177
178&cps_ethernet {
179	status = "okay";
180};
181
182&cps_eth1 {
183	status = "okay";
184	phy = <&phy0>;
185	phy-mode = "rgmii-id";
186};
187
188&ap_sdhci0 {
189	status = "okay";
190	bus-width = <4>;
191	non-removable;
192};
193
194&cpm_sdhci0 {
195	status = "okay";
196	bus-width = <8>;
197	non-removable;
198};
199