1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 37xx family of SoCs.
4 *
5 * Copyright (C) 2016 Marvell
6 *
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 *
9 */
10
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12
13/ {
14	model = "Marvell Armada 37xx SoC";
15	compatible = "marvell,armada3700";
16	interrupt-parent = <&gic>;
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		serial0 = &uart0;
22		serial1 = &uart1;
23	};
24
25	reserved-memory {
26		#address-cells = <2>;
27		#size-cells = <2>;
28		ranges;
29
30		/*
31		 * The PSCI firmware region depicted below is the default one
32		 * and should be updated by the bootloader.
33		 */
34		psci-area@4000000 {
35			reg = <0 0x4000000 0 0x200000>;
36			no-map;
37		};
38	};
39
40	cpus {
41		#address-cells = <1>;
42		#size-cells = <0>;
43		cpu0: cpu@0 {
44			device_type = "cpu";
45			compatible = "arm,cortex-a53";
46			reg = <0>;
47			clocks = <&nb_periph_clk 16>;
48			enable-method = "psci";
49		};
50	};
51
52	psci {
53		compatible = "arm,psci-0.2";
54		method = "smc";
55	};
56
57	timer {
58		compatible = "arm,armv8-timer";
59		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
60			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
61			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
62			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
63	};
64
65	pmu {
66		compatible = "arm,armv8-pmuv3";
67		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
68	};
69
70	soc {
71		compatible = "simple-bus";
72		#address-cells = <2>;
73		#size-cells = <2>;
74		ranges;
75
76		internal-regs@d0000000 {
77			#address-cells = <1>;
78			#size-cells = <1>;
79			compatible = "simple-bus";
80			/* 32M internal register @ 0xd000_0000 */
81			ranges = <0x0 0x0 0xd0000000 0x2000000>;
82
83			wdt: watchdog@8300 {
84				compatible = "marvell,armada-3700-wdt";
85				reg = <0x8300 0x40>;
86				marvell,system-controller = <&cpu_misc>;
87				clocks = <&xtalclk>;
88			};
89
90			cpu_misc: system-controller@d000 {
91				compatible = "marvell,armada-3700-cpu-misc",
92					     "syscon";
93				reg = <0xd000 0x1000>;
94			};
95
96			spi0: spi@10600 {
97				compatible = "marvell,armada-3700-spi";
98				#address-cells = <1>;
99				#size-cells = <0>;
100				reg = <0x10600 0xA00>;
101				clocks = <&nb_periph_clk 7>;
102				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
103				num-cs = <4>;
104				status = "disabled";
105			};
106
107			i2c0: i2c@11000 {
108				compatible = "marvell,armada-3700-i2c";
109				reg = <0x11000 0x24>;
110				#address-cells = <1>;
111				#size-cells = <0>;
112				clocks = <&nb_periph_clk 10>;
113				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
114				mrvl,i2c-fast-mode;
115				status = "disabled";
116			};
117
118			i2c1: i2c@11080 {
119				compatible = "marvell,armada-3700-i2c";
120				reg = <0x11080 0x24>;
121				#address-cells = <1>;
122				#size-cells = <0>;
123				clocks = <&nb_periph_clk 9>;
124				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
125				mrvl,i2c-fast-mode;
126				status = "disabled";
127			};
128
129			avs: avs@11500 {
130				compatible = "marvell,armada-3700-avs",
131					     "syscon";
132				reg = <0x11500 0x40>;
133			};
134
135			uartclk: clock-controller@12010 {
136				compatible = "marvell,armada-3700-uart-clock";
137				reg = <0x12010 0x4>, <0x12210 0x4>;
138				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
139					 <&tbg 3>, <&xtalclk>;
140				clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S",
141					      "TBG-B-S", "xtal";
142				#clock-cells = <1>;
143			};
144
145			uart0: serial@12000 {
146				compatible = "marvell,armada-3700-uart";
147				reg = <0x12000 0x18>;
148				clocks = <&uartclk 0>;
149				interrupts =
150				<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
151				<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
152				<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
153				interrupt-names = "uart-sum", "uart-tx", "uart-rx";
154				status = "disabled";
155			};
156
157			uart1: serial@12200 {
158				compatible = "marvell,armada-3700-uart-ext";
159				reg = <0x12200 0x30>;
160				clocks = <&uartclk 1>;
161				interrupts =
162				<GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
163				<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
164				interrupt-names = "uart-tx", "uart-rx";
165				status = "disabled";
166			};
167
168			nb_periph_clk: nb-periph-clk@13000 {
169				compatible = "marvell,armada-3700-periph-clock-nb",
170					     "syscon";
171				reg = <0x13000 0x100>;
172				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
173				<&tbg 3>, <&xtalclk>;
174				#clock-cells = <1>;
175			};
176
177			sb_periph_clk: sb-periph-clk@18000 {
178				compatible = "marvell,armada-3700-periph-clock-sb";
179				reg = <0x18000 0x100>;
180				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
181				<&tbg 3>, <&xtalclk>;
182				#clock-cells = <1>;
183			};
184
185			tbg: tbg@13200 {
186				compatible = "marvell,armada-3700-tbg-clock";
187				reg = <0x13200 0x100>;
188				clocks = <&xtalclk>;
189				#clock-cells = <1>;
190			};
191
192			pinctrl_nb: pinctrl@13800 {
193				compatible = "marvell,armada3710-nb-pinctrl",
194					     "syscon", "simple-mfd";
195				reg = <0x13800 0x100>, <0x13C00 0x20>;
196				/* MPP1[19:0] */
197				gpionb: gpio {
198					#gpio-cells = <2>;
199					gpio-ranges = <&pinctrl_nb 0 0 36>;
200					gpio-controller;
201					interrupt-controller;
202					#interrupt-cells = <2>;
203					interrupts =
204					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
205					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
206					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
207					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
208					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
209					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
210					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
211					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
212					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
213					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
214					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
215					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
216				};
217
218				xtalclk: xtal-clk {
219					compatible = "marvell,armada-3700-xtal-clock";
220					clock-output-names = "xtal";
221					#clock-cells = <0>;
222				};
223
224				spi_quad_pins: spi-quad-pins {
225					groups = "spi_quad";
226					function = "spi";
227				};
228
229				spi_cs1_pins: spi-cs1-pins {
230					groups = "spi_cs1";
231					function = "spi";
232				};
233
234				i2c1_pins: i2c1-pins {
235					groups = "i2c1";
236					function = "i2c";
237				};
238
239				i2c2_pins: i2c2-pins {
240					groups = "i2c2";
241					function = "i2c";
242				};
243
244				uart1_pins: uart1-pins {
245					groups = "uart1";
246					function = "uart";
247				};
248
249				uart2_pins: uart2-pins {
250					groups = "uart2";
251					function = "uart";
252				};
253
254				mmc_pins: mmc-pins {
255					groups = "emmc_nb";
256					function = "emmc";
257				};
258			};
259
260			nb_pm: syscon@14000 {
261				compatible = "marvell,armada-3700-nb-pm",
262					     "syscon";
263				reg = <0x14000 0x60>;
264			};
265
266			comphy: phy@18300 {
267				compatible = "marvell,comphy-a3700";
268				reg = <0x18300 0x300>,
269				      <0x1F000 0x400>,
270				      <0x5C000 0x400>,
271				      <0xe0178 0x8>;
272				reg-names = "comphy",
273					    "lane1_pcie_gbe",
274					    "lane0_usb3_gbe",
275					    "lane2_sata_usb3";
276				#address-cells = <1>;
277				#size-cells = <0>;
278				clocks = <&xtalclk>;
279				clock-names = "xtal";
280
281				comphy0: phy@0 {
282					reg = <0>;
283					#phy-cells = <1>;
284				};
285
286				comphy1: phy@1 {
287					reg = <1>;
288					#phy-cells = <1>;
289				};
290
291				comphy2: phy@2 {
292					reg = <2>;
293					#phy-cells = <1>;
294				};
295			};
296
297			pinctrl_sb: pinctrl@18800 {
298				compatible = "marvell,armada3710-sb-pinctrl",
299					     "syscon", "simple-mfd";
300				reg = <0x18800 0x100>, <0x18C00 0x20>;
301				/* MPP2[23:0] */
302				gpiosb: gpio {
303					#gpio-cells = <2>;
304					gpio-ranges = <&pinctrl_sb 0 0 30>;
305					gpio-controller;
306					interrupt-controller;
307					#interrupt-cells = <2>;
308					interrupts =
309					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
310					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
311					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
312					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
313					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
314				};
315
316				rgmii_pins: mii-pins {
317					groups = "rgmii";
318					function = "mii";
319				};
320
321				smi_pins: smi-pins {
322					groups = "smi";
323					function = "smi";
324				};
325
326				sdio_pins: sdio-pins {
327					groups = "sdio_sb";
328					function = "sdio";
329				};
330
331				pcie_reset_pins: pcie-reset-pins {
332					groups = "pcie1"; /* this actually controls "pcie1_reset" */
333					function = "gpio";
334				};
335
336				pcie_clkreq_pins: pcie-clkreq-pins {
337					groups = "pcie1_clkreq";
338					function = "pcie";
339				};
340			};
341
342			eth0: ethernet@30000 {
343				   compatible = "marvell,armada-3700-neta";
344				   reg = <0x30000 0x4000>;
345				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
346				   clocks = <&sb_periph_clk 8>;
347				   status = "disabled";
348			};
349
350			mdio: mdio@32004 {
351				#address-cells = <1>;
352				#size-cells = <0>;
353				compatible = "marvell,orion-mdio";
354				reg = <0x32004 0x4>;
355			};
356
357			eth1: ethernet@40000 {
358				compatible = "marvell,armada-3700-neta";
359				reg = <0x40000 0x4000>;
360				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
361				clocks = <&sb_periph_clk 7>;
362				status = "disabled";
363			};
364
365			usb3: usb@58000 {
366				compatible = "marvell,armada3700-xhci",
367				"generic-xhci";
368				reg = <0x58000 0x4000>;
369				marvell,usb-misc-reg = <&usb32_syscon>;
370				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
371				clocks = <&sb_periph_clk 12>;
372				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
373				phy-names = "usb3-phy", "usb2-utmi-otg-phy";
374				status = "disabled";
375			};
376
377			usb2_utmi_otg_phy: phy@5d000 {
378				compatible = "marvell,a3700-utmi-otg-phy";
379				reg = <0x5d000 0x800>;
380				marvell,usb-misc-reg = <&usb32_syscon>;
381				#phy-cells = <0>;
382			};
383
384			usb32_syscon: system-controller@5d800 {
385				compatible = "marvell,armada-3700-usb2-host-device-misc",
386				"syscon";
387				reg = <0x5d800 0x800>;
388			};
389
390			usb2: usb@5e000 {
391				compatible = "marvell,armada-3700-ehci";
392				reg = <0x5e000 0x1000>;
393				marvell,usb-misc-reg = <&usb2_syscon>;
394				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
395				phys = <&usb2_utmi_host_phy>;
396				phy-names = "usb2-utmi-host-phy";
397				status = "disabled";
398			};
399
400			usb2_utmi_host_phy: phy@5f000 {
401				compatible = "marvell,a3700-utmi-host-phy";
402				reg = <0x5f000 0x800>;
403				marvell,usb-misc-reg = <&usb2_syscon>;
404				#phy-cells = <0>;
405			};
406
407			usb2_syscon: system-controller@5f800 {
408				compatible = "marvell,armada-3700-usb2-host-misc",
409				"syscon";
410				reg = <0x5f800 0x800>;
411			};
412
413			xor@60900 {
414				compatible = "marvell,armada-3700-xor";
415				reg = <0x60900 0x100>,
416				      <0x60b00 0x100>;
417
418				xor10 {
419					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
420				};
421				xor11 {
422					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
423				};
424			};
425
426			crypto: crypto@90000 {
427				compatible = "inside-secure,safexcel-eip97ies";
428				reg = <0x90000 0x20000>;
429				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
430					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
431					     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
432					     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
433					     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
434					     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
435				interrupt-names = "mem", "ring0", "ring1",
436						  "ring2", "ring3", "eip";
437				clocks = <&nb_periph_clk 15>;
438			};
439
440			rwtm: mailbox@b0000 {
441				compatible = "marvell,armada-3700-rwtm-mailbox";
442				reg = <0xb0000 0x100>;
443				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
444				#mbox-cells = <1>;
445			};
446
447			sdhci1: mmc@d0000 {
448				compatible = "marvell,armada-3700-sdhci",
449					     "marvell,sdhci-xenon";
450				reg = <0xd0000 0x300>,
451				      <0x1e808 0x4>;
452				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
453				clocks = <&nb_periph_clk 0>;
454				clock-names = "core";
455				status = "disabled";
456			};
457
458			sdhci0: mmc@d8000 {
459				compatible = "marvell,armada-3700-sdhci",
460					     "marvell,sdhci-xenon";
461				reg = <0xd8000 0x300>,
462				      <0x17808 0x4>;
463				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
464				clocks = <&nb_periph_clk 0>;
465				clock-names = "core";
466				status = "disabled";
467			};
468
469			sata: sata@e0000 {
470				compatible = "marvell,armada-3700-ahci";
471				reg = <0xe0000 0x178>;
472				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
473				clocks = <&nb_periph_clk 1>;
474				phys = <&comphy2 0>;
475				phy-names = "sata-phy";
476				status = "disabled";
477			};
478
479			gic: interrupt-controller@1d00000 {
480				compatible = "arm,gic-v3";
481				#interrupt-cells = <3>;
482				interrupt-controller;
483				reg = <0x1d00000 0x10000>, /* GICD */
484				      <0x1d40000 0x40000>, /* GICR */
485				      <0x1d80000 0x2000>,  /* GICC */
486				      <0x1d90000 0x2000>,  /* GICH */
487				      <0x1da0000 0x20000>; /* GICV */
488				interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
489			};
490		};
491
492		pcie0: pcie@d0070000 {
493			compatible = "marvell,armada-3700-pcie";
494			device_type = "pci";
495			status = "disabled";
496			reg = <0 0xd0070000 0 0x20000>;
497			#address-cells = <3>;
498			#size-cells = <2>;
499			bus-range = <0x00 0xff>;
500			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
501			#interrupt-cells = <1>;
502			clocks = <&sb_periph_clk 13>;
503			msi-parent = <&pcie0>;
504			msi-controller;
505			/*
506			 * The 128 MiB address range [0xe8000000-0xf0000000] is
507			 * dedicated for PCIe and can be assigned to 8 windows
508			 * with size a power of two. Use one 64 KiB window for
509			 * IO at the end and the remaining seven windows
510			 * (totaling 127 MiB) for MEM.
511			 */
512			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
513				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
514			interrupt-map-mask = <0 0 0 7>;
515			interrupt-map = <0 0 0 1 &pcie_intc 0>,
516					<0 0 0 2 &pcie_intc 1>,
517					<0 0 0 3 &pcie_intc 2>,
518					<0 0 0 4 &pcie_intc 3>;
519			max-link-speed = <2>;
520			phys = <&comphy1 0>;
521			pcie_intc: interrupt-controller {
522				interrupt-controller;
523				#interrupt-cells = <1>;
524			};
525		};
526	};
527
528	firmware {
529		armada-3700-rwtm {
530			compatible = "marvell,armada-3700-rwtm-firmware";
531			mboxes = <&rwtm 0>;
532			status = "okay";
533		};
534	};
535};
536