1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for CZ.NIC Turris Mox Board
4 * 2019 by Marek Behún <kabel@kernel.org>
5 */
6
7/dts-v1/;
8
9#include <dt-bindings/bus/moxtet.h>
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include "armada-372x.dtsi"
13
14/ {
15	model = "CZ.NIC Turris Mox Board";
16	compatible = "cznic,turris-mox", "marvell,armada3720",
17		     "marvell,armada3710";
18
19	aliases {
20		spi0 = &spi0;
21		ethernet0 = &eth0;
22		ethernet1 = &eth1;
23		mmc0 = &sdhci0;
24		mmc1 = &sdhci1;
25	};
26
27	chosen {
28		stdout-path = "serial0:115200n8";
29	};
30
31	memory@0 {
32		device_type = "memory";
33		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
34	};
35
36	leds {
37		compatible = "gpio-leds";
38		led {
39			label = "mox:red:activity";
40			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
41			linux,default-trigger = "default-on";
42		};
43	};
44
45	gpio-keys {
46		compatible = "gpio-keys";
47
48		key-reset {
49			label = "reset";
50			linux,code = <KEY_RESTART>;
51			gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
52			debounce-interval = <60>;
53		};
54	};
55
56	exp_usb3_vbus: usb3-vbus {
57		compatible = "regulator-fixed";
58		regulator-name = "usb3-vbus";
59		regulator-min-microvolt = <5000000>;
60		regulator-max-microvolt = <5000000>;
61		enable-active-high;
62		regulator-always-on;
63		gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>;
64	};
65
66	vsdc_reg: vsdc-reg {
67		compatible = "regulator-gpio";
68		regulator-name = "vsdc";
69		regulator-min-microvolt = <1800000>;
70		regulator-max-microvolt = <3300000>;
71		regulator-boot-on;
72
73		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
74		gpios-states = <0>;
75		states = <1800000 0x1
76			  3300000 0x0>;
77		enable-active-high;
78	};
79
80	vsdio_reg: vsdio-reg {
81		compatible = "regulator-gpio";
82		regulator-name = "vsdio";
83		regulator-min-microvolt = <1800000>;
84		regulator-max-microvolt = <3300000>;
85		regulator-boot-on;
86
87		gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>;
88		gpios-states = <0>;
89		states = <1800000 0x1
90			  3300000 0x0>;
91		enable-active-high;
92	};
93
94	sdhci1_pwrseq: sdhci1-pwrseq {
95		compatible = "mmc-pwrseq-simple";
96		reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
97		status = "okay";
98	};
99
100	sfp: sfp {
101		compatible = "sff,sfp";
102		i2c-bus = <&i2c0>;
103		los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
104		tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
105		mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
106		tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
107		rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
108		maximum-power-milliwatt = <3000>;
109
110		/* enabled by U-Boot if SFP module is present */
111		status = "disabled";
112	};
113
114	firmware {
115		armada-3700-rwtm {
116			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
117		};
118	};
119};
120
121&i2c0 {
122	pinctrl-names = "default";
123	pinctrl-0 = <&i2c1_pins>;
124	clock-frequency = <100000>;
125	/delete-property/ mrvl,i2c-fast-mode;
126	status = "okay";
127
128	rtc@6f {
129		compatible = "microchip,mcp7940x";
130		reg = <0x6f>;
131	};
132};
133
134&pcie0 {
135	pinctrl-names = "default";
136	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
137	status = "okay";
138	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
139	/*
140	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
141	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
142	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
143	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
144	 * no remapping) and that this address is the lowest from all specified ranges. If these
145	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
146	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
147	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
148	 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
149	 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
150	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
151	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
152	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
153	 * Bug related to requirement of same child and parent addresses for first range is fixed
154	 * in U-Boot version 2022.04 by following commit:
155	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
156	 */
157	#address-cells = <3>;
158	#size-cells = <2>;
159	ranges = <0x81000000 0 0xe8000000   0 0xe8000000   0 0x01000000   /* Port 0 IO */
160		  0x82000000 0 0xe9000000   0 0xe9000000   0 0x07000000>; /* Port 0 MEM */
161
162	/* enabled by U-Boot if PCIe module is present */
163	status = "disabled";
164};
165
166&uart0 {
167	status = "okay";
168};
169
170&eth0 {
171	pinctrl-names = "default";
172	pinctrl-0 = <&rgmii_pins>;
173	phy-mode = "rgmii-id";
174	phy-handle = <&phy1>;
175	status = "okay";
176};
177
178&eth1 {
179	phy-mode = "2500base-x";
180	managed = "in-band-status";
181	phys = <&comphy0 1>;
182};
183
184&sdhci0 {
185	wp-inverted;
186	bus-width = <4>;
187	cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
188	vqmmc-supply = <&vsdc_reg>;
189	marvell,pad-type = "sd";
190	status = "okay";
191};
192
193&sdhci1 {
194	pinctrl-names = "default";
195	pinctrl-0 = <&sdio_pins>;
196	non-removable;
197	bus-width = <4>;
198	marvell,pad-type = "sd";
199	vqmmc-supply = <&vsdio_reg>;
200	mmc-pwrseq = <&sdhci1_pwrseq>;
201	/* forbid SDR104 for FCC purposes */
202	sdhci-caps-mask = <0x2 0x0>;
203	status = "okay";
204};
205
206&spi0 {
207	status = "okay";
208	pinctrl-names = "default";
209	pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
210	assigned-clocks = <&nb_periph_clk 7>;
211	assigned-clock-parents = <&tbg 1>;
212	assigned-clock-rates = <20000000>;
213
214	flash@0 {
215		#address-cells = <1>;
216		#size-cells = <1>;
217		compatible = "jedec,spi-nor";
218		reg = <0>;
219		spi-max-frequency = <20000000>;
220
221		partitions {
222			compatible = "fixed-partitions";
223			#address-cells = <1>;
224			#size-cells = <1>;
225
226			partition@0 {
227				label = "secure-firmware";
228				reg = <0x0 0x20000>;
229			};
230
231			partition@20000 {
232				label = "a53-firmware";
233				reg = <0x20000 0x160000>;
234			};
235
236			partition@180000 {
237				label = "u-boot-env";
238				reg = <0x180000 0x10000>;
239			};
240
241			partition@190000 {
242				label = "Rescue system";
243				reg = <0x190000 0x660000>;
244			};
245
246			partition@7f0000 {
247				label = "dtb";
248				reg = <0x7f0000 0x10000>;
249			};
250		};
251	};
252
253	moxtet: moxtet@1 {
254		#address-cells = <1>;
255		#size-cells = <0>;
256		compatible = "cznic,moxtet";
257		reg = <1>;
258		reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
259		spi-max-frequency = <10000000>;
260		spi-cpol;
261		spi-cpha;
262		interrupt-controller;
263		#interrupt-cells = <1>;
264		interrupt-parent = <&gpiosb>;
265		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
266		status = "okay";
267
268		moxtet_sfp: gpio@0 {
269			compatible = "cznic,moxtet-gpio";
270			gpio-controller;
271			#gpio-cells = <2>;
272			reg = <0>;
273			status = "disabled";
274		};
275	};
276};
277
278&usb2 {
279	status = "okay";
280};
281
282&comphy2 {
283	connector {
284		compatible = "usb-a-connector";
285		phy-supply = <&exp_usb3_vbus>;
286	};
287};
288
289&usb3 {
290	status = "okay";
291	phys = <&comphy2 0>;
292};
293
294&mdio {
295	pinctrl-names = "default";
296	pinctrl-0 = <&smi_pins>;
297	status = "okay";
298
299	phy1: ethernet-phy@1 {
300		reg = <1>;
301	};
302
303	/* switch nodes are enabled by U-Boot if modules are present */
304	switch0@10 {
305		compatible = "marvell,mv88e6190";
306		reg = <0x10>;
307		dsa,member = <0 0>;
308		interrupt-parent = <&moxtet>;
309		interrupts = <MOXTET_IRQ_PERIDOT(0)>;
310		status = "disabled";
311
312		mdio {
313			#address-cells = <1>;
314			#size-cells = <0>;
315
316			switch0phy1: switch0phy1@1 {
317				reg = <0x1>;
318			};
319
320			switch0phy2: switch0phy2@2 {
321				reg = <0x2>;
322			};
323
324			switch0phy3: switch0phy3@3 {
325				reg = <0x3>;
326			};
327
328			switch0phy4: switch0phy4@4 {
329				reg = <0x4>;
330			};
331
332			switch0phy5: switch0phy5@5 {
333				reg = <0x5>;
334			};
335
336			switch0phy6: switch0phy6@6 {
337				reg = <0x6>;
338			};
339
340			switch0phy7: switch0phy7@7 {
341				reg = <0x7>;
342			};
343
344			switch0phy8: switch0phy8@8 {
345				reg = <0x8>;
346			};
347		};
348
349		ports {
350			#address-cells = <1>;
351			#size-cells = <0>;
352
353			port@1 {
354				reg = <0x1>;
355				label = "lan1";
356				phy-handle = <&switch0phy1>;
357			};
358
359			port@2 {
360				reg = <0x2>;
361				label = "lan2";
362				phy-handle = <&switch0phy2>;
363			};
364
365			port@3 {
366				reg = <0x3>;
367				label = "lan3";
368				phy-handle = <&switch0phy3>;
369			};
370
371			port@4 {
372				reg = <0x4>;
373				label = "lan4";
374				phy-handle = <&switch0phy4>;
375			};
376
377			port@5 {
378				reg = <0x5>;
379				label = "lan5";
380				phy-handle = <&switch0phy5>;
381			};
382
383			port@6 {
384				reg = <0x6>;
385				label = "lan6";
386				phy-handle = <&switch0phy6>;
387			};
388
389			port@7 {
390				reg = <0x7>;
391				label = "lan7";
392				phy-handle = <&switch0phy7>;
393			};
394
395			port@8 {
396				reg = <0x8>;
397				label = "lan8";
398				phy-handle = <&switch0phy8>;
399			};
400
401			port@9 {
402				reg = <0x9>;
403				label = "cpu";
404				ethernet = <&eth1>;
405				phy-mode = "2500base-x";
406				managed = "in-band-status";
407			};
408
409			switch0port10: port@a {
410				reg = <0xa>;
411				label = "dsa";
412				phy-mode = "2500base-x";
413				managed = "in-band-status";
414				link = <&switch1port9 &switch2port9>;
415				status = "disabled";
416			};
417
418			port-sfp@a {
419				reg = <0xa>;
420				label = "sfp";
421				sfp = <&sfp>;
422				phy-mode = "sgmii";
423				managed = "in-band-status";
424				status = "disabled";
425			};
426		};
427	};
428
429	switch0@2 {
430		compatible = "marvell,mv88e6085";
431		reg = <0x2>;
432		dsa,member = <0 0>;
433		interrupt-parent = <&moxtet>;
434		interrupts = <MOXTET_IRQ_TOPAZ>;
435		status = "disabled";
436
437		mdio {
438			#address-cells = <1>;
439			#size-cells = <0>;
440
441			switch0phy1_topaz: switch0phy1@11 {
442				reg = <0x11>;
443			};
444
445			switch0phy2_topaz: switch0phy2@12 {
446				reg = <0x12>;
447			};
448
449			switch0phy3_topaz: switch0phy3@13 {
450				reg = <0x13>;
451			};
452
453			switch0phy4_topaz: switch0phy4@14 {
454				reg = <0x14>;
455			};
456		};
457
458		ports {
459			#address-cells = <1>;
460			#size-cells = <0>;
461
462			port@1 {
463				reg = <0x1>;
464				label = "lan1";
465				phy-handle = <&switch0phy1_topaz>;
466			};
467
468			port@2 {
469				reg = <0x2>;
470				label = "lan2";
471				phy-handle = <&switch0phy2_topaz>;
472			};
473
474			port@3 {
475				reg = <0x3>;
476				label = "lan3";
477				phy-handle = <&switch0phy3_topaz>;
478			};
479
480			port@4 {
481				reg = <0x4>;
482				label = "lan4";
483				phy-handle = <&switch0phy4_topaz>;
484			};
485
486			port@5 {
487				reg = <0x5>;
488				label = "cpu";
489				phy-mode = "2500base-x";
490				managed = "in-band-status";
491				ethernet = <&eth1>;
492			};
493		};
494	};
495
496	switch1@11 {
497		compatible = "marvell,mv88e6190";
498		reg = <0x11>;
499		dsa,member = <0 1>;
500		interrupt-parent = <&moxtet>;
501		interrupts = <MOXTET_IRQ_PERIDOT(1)>;
502		status = "disabled";
503
504		mdio {
505			#address-cells = <1>;
506			#size-cells = <0>;
507
508			switch1phy1: switch1phy1@1 {
509				reg = <0x1>;
510			};
511
512			switch1phy2: switch1phy2@2 {
513				reg = <0x2>;
514			};
515
516			switch1phy3: switch1phy3@3 {
517				reg = <0x3>;
518			};
519
520			switch1phy4: switch1phy4@4 {
521				reg = <0x4>;
522			};
523
524			switch1phy5: switch1phy5@5 {
525				reg = <0x5>;
526			};
527
528			switch1phy6: switch1phy6@6 {
529				reg = <0x6>;
530			};
531
532			switch1phy7: switch1phy7@7 {
533				reg = <0x7>;
534			};
535
536			switch1phy8: switch1phy8@8 {
537				reg = <0x8>;
538			};
539		};
540
541		ports {
542			#address-cells = <1>;
543			#size-cells = <0>;
544
545			port@1 {
546				reg = <0x1>;
547				label = "lan9";
548				phy-handle = <&switch1phy1>;
549			};
550
551			port@2 {
552				reg = <0x2>;
553				label = "lan10";
554				phy-handle = <&switch1phy2>;
555			};
556
557			port@3 {
558				reg = <0x3>;
559				label = "lan11";
560				phy-handle = <&switch1phy3>;
561			};
562
563			port@4 {
564				reg = <0x4>;
565				label = "lan12";
566				phy-handle = <&switch1phy4>;
567			};
568
569			port@5 {
570				reg = <0x5>;
571				label = "lan13";
572				phy-handle = <&switch1phy5>;
573			};
574
575			port@6 {
576				reg = <0x6>;
577				label = "lan14";
578				phy-handle = <&switch1phy6>;
579			};
580
581			port@7 {
582				reg = <0x7>;
583				label = "lan15";
584				phy-handle = <&switch1phy7>;
585			};
586
587			port@8 {
588				reg = <0x8>;
589				label = "lan16";
590				phy-handle = <&switch1phy8>;
591			};
592
593			switch1port9: port@9 {
594				reg = <0x9>;
595				label = "dsa";
596				phy-mode = "2500base-x";
597				managed = "in-band-status";
598				link = <&switch0port10>;
599			};
600
601			switch1port10: port@a {
602				reg = <0xa>;
603				label = "dsa";
604				phy-mode = "2500base-x";
605				managed = "in-band-status";
606				link = <&switch2port9>;
607				status = "disabled";
608			};
609
610			port-sfp@a {
611				reg = <0xa>;
612				label = "sfp";
613				sfp = <&sfp>;
614				phy-mode = "sgmii";
615				managed = "in-band-status";
616				status = "disabled";
617			};
618		};
619	};
620
621	switch1@2 {
622		compatible = "marvell,mv88e6085";
623		reg = <0x2>;
624		dsa,member = <0 1>;
625		interrupt-parent = <&moxtet>;
626		interrupts = <MOXTET_IRQ_TOPAZ>;
627		status = "disabled";
628
629		mdio {
630			#address-cells = <1>;
631			#size-cells = <0>;
632
633			switch1phy1_topaz: switch1phy1@11 {
634				reg = <0x11>;
635			};
636
637			switch1phy2_topaz: switch1phy2@12 {
638				reg = <0x12>;
639			};
640
641			switch1phy3_topaz: switch1phy3@13 {
642				reg = <0x13>;
643			};
644
645			switch1phy4_topaz: switch1phy4@14 {
646				reg = <0x14>;
647			};
648		};
649
650		ports {
651			#address-cells = <1>;
652			#size-cells = <0>;
653
654			port@1 {
655				reg = <0x1>;
656				label = "lan9";
657				phy-handle = <&switch1phy1_topaz>;
658			};
659
660			port@2 {
661				reg = <0x2>;
662				label = "lan10";
663				phy-handle = <&switch1phy2_topaz>;
664			};
665
666			port@3 {
667				reg = <0x3>;
668				label = "lan11";
669				phy-handle = <&switch1phy3_topaz>;
670			};
671
672			port@4 {
673				reg = <0x4>;
674				label = "lan12";
675				phy-handle = <&switch1phy4_topaz>;
676			};
677
678			port@5 {
679				reg = <0x5>;
680				label = "dsa";
681				phy-mode = "2500base-x";
682				managed = "in-band-status";
683				link = <&switch0port10>;
684			};
685		};
686	};
687
688	switch2@12 {
689		compatible = "marvell,mv88e6190";
690		reg = <0x12>;
691		dsa,member = <0 2>;
692		interrupt-parent = <&moxtet>;
693		interrupts = <MOXTET_IRQ_PERIDOT(2)>;
694		status = "disabled";
695
696		mdio {
697			#address-cells = <1>;
698			#size-cells = <0>;
699
700			switch2phy1: switch2phy1@1 {
701				reg = <0x1>;
702			};
703
704			switch2phy2: switch2phy2@2 {
705				reg = <0x2>;
706			};
707
708			switch2phy3: switch2phy3@3 {
709				reg = <0x3>;
710			};
711
712			switch2phy4: switch2phy4@4 {
713				reg = <0x4>;
714			};
715
716			switch2phy5: switch2phy5@5 {
717				reg = <0x5>;
718			};
719
720			switch2phy6: switch2phy6@6 {
721				reg = <0x6>;
722			};
723
724			switch2phy7: switch2phy7@7 {
725				reg = <0x7>;
726			};
727
728			switch2phy8: switch2phy8@8 {
729				reg = <0x8>;
730			};
731		};
732
733		ports {
734			#address-cells = <1>;
735			#size-cells = <0>;
736
737			port@1 {
738				reg = <0x1>;
739				label = "lan17";
740				phy-handle = <&switch2phy1>;
741			};
742
743			port@2 {
744				reg = <0x2>;
745				label = "lan18";
746				phy-handle = <&switch2phy2>;
747			};
748
749			port@3 {
750				reg = <0x3>;
751				label = "lan19";
752				phy-handle = <&switch2phy3>;
753			};
754
755			port@4 {
756				reg = <0x4>;
757				label = "lan20";
758				phy-handle = <&switch2phy4>;
759			};
760
761			port@5 {
762				reg = <0x5>;
763				label = "lan21";
764				phy-handle = <&switch2phy5>;
765			};
766
767			port@6 {
768				reg = <0x6>;
769				label = "lan22";
770				phy-handle = <&switch2phy6>;
771			};
772
773			port@7 {
774				reg = <0x7>;
775				label = "lan23";
776				phy-handle = <&switch2phy7>;
777			};
778
779			port@8 {
780				reg = <0x8>;
781				label = "lan24";
782				phy-handle = <&switch2phy8>;
783			};
784
785			switch2port9: port@9 {
786				reg = <0x9>;
787				label = "dsa";
788				phy-mode = "2500base-x";
789				managed = "in-band-status";
790				link = <&switch1port10 &switch0port10>;
791			};
792
793			port-sfp@a {
794				reg = <0xa>;
795				label = "sfp";
796				sfp = <&sfp>;
797				phy-mode = "sgmii";
798				managed = "in-band-status";
799				status = "disabled";
800			};
801		};
802	};
803
804	switch2@2 {
805		compatible = "marvell,mv88e6085";
806		reg = <0x2>;
807		dsa,member = <0 2>;
808		interrupt-parent = <&moxtet>;
809		interrupts = <MOXTET_IRQ_TOPAZ>;
810		status = "disabled";
811
812		mdio {
813			#address-cells = <1>;
814			#size-cells = <0>;
815
816			switch2phy1_topaz: switch2phy1@11 {
817				reg = <0x11>;
818			};
819
820			switch2phy2_topaz: switch2phy2@12 {
821				reg = <0x12>;
822			};
823
824			switch2phy3_topaz: switch2phy3@13 {
825				reg = <0x13>;
826			};
827
828			switch2phy4_topaz: switch2phy4@14 {
829				reg = <0x14>;
830			};
831		};
832
833		ports {
834			#address-cells = <1>;
835			#size-cells = <0>;
836
837			port@1 {
838				reg = <0x1>;
839				label = "lan17";
840				phy-handle = <&switch2phy1_topaz>;
841			};
842
843			port@2 {
844				reg = <0x2>;
845				label = "lan18";
846				phy-handle = <&switch2phy2_topaz>;
847			};
848
849			port@3 {
850				reg = <0x3>;
851				label = "lan19";
852				phy-handle = <&switch2phy3_topaz>;
853			};
854
855			port@4 {
856				reg = <0x4>;
857				label = "lan20";
858				phy-handle = <&switch2phy4_topaz>;
859			};
860
861			port@5 {
862				reg = <0x5>;
863				label = "dsa";
864				phy-mode = "2500base-x";
865				managed = "in-band-status";
866				link = <&switch1port10 &switch0port10>;
867			};
868		};
869	};
870};
871