xref: /openbmc/linux/arch/arm64/boot/dts/lg/lg1313.dtsi (revision 835fd614)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * dts file for lg1313 SoC
4 *
5 * Copyright (C) 2016, LG Electronics
6 */
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10
11/ {
12	#address-cells = <2>;
13	#size-cells = <2>;
14
15	compatible = "lge,lg1313";
16	interrupt-parent = <&gic>;
17
18	cpus {
19		#address-cells = <2>;
20		#size-cells = <0>;
21
22		cpu0: cpu@0 {
23			device_type = "cpu";
24			compatible = "arm,cortex-a53";
25			reg = <0x0 0x0>;
26			next-level-cache = <&L2_0>;
27		};
28		cpu1: cpu@1 {
29			device_type = "cpu";
30			compatible = "arm,cortex-a53";
31			reg = <0x0 0x1>;
32			enable-method = "psci";
33			next-level-cache = <&L2_0>;
34		};
35		cpu2: cpu@2 {
36			device_type = "cpu";
37			compatible = "arm,cortex-a53";
38			reg = <0x0 0x2>;
39			enable-method = "psci";
40			next-level-cache = <&L2_0>;
41		};
42		cpu3: cpu@3 {
43			device_type = "cpu";
44			compatible = "arm,cortex-a53";
45			reg = <0x0 0x3>;
46			enable-method = "psci";
47			next-level-cache = <&L2_0>;
48		};
49		L2_0: l2-cache0 {
50			compatible = "cache";
51		};
52	};
53
54	psci {
55		compatible  = "arm,psci-0.2", "arm,psci";
56		method = "smc";
57		cpu_suspend = <0x84000001>;
58		cpu_off = <0x84000002>;
59		cpu_on = <0x84000003>;
60	};
61
62	gic: interrupt-controller@c0001000 {
63		#interrupt-cells = <3>;
64		compatible = "arm,gic-400";
65		interrupt-controller;
66		reg = <0x0 0xc0001000 0x1000>,
67		      <0x0 0xc0002000 0x2000>,
68		      <0x0 0xc0004000 0x2000>,
69		      <0x0 0xc0006000 0x2000>;
70	};
71
72	pmu {
73		compatible = "arm,cortex-a53-pmu";
74		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
75			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
76			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
77			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
78		interrupt-affinity = <&cpu0>,
79				     <&cpu1>,
80				     <&cpu2>,
81				     <&cpu3>;
82	};
83
84	timer {
85		compatible = "arm,armv8-timer";
86		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
87			      IRQ_TYPE_LEVEL_LOW)>,
88			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
89			      IRQ_TYPE_LEVEL_LOW)>,
90			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
91			      IRQ_TYPE_LEVEL_LOW)>,
92			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
93			      IRQ_TYPE_LEVEL_LOW)>;
94	};
95
96	clk_bus: clk_bus {
97		#clock-cells = <0>;
98
99		compatible = "fixed-clock";
100		clock-frequency = <198000000>;
101		clock-output-names = "BUSCLK";
102	};
103
104	soc {
105		#address-cells = <2>;
106		#size-cells = <1>;
107
108		compatible = "simple-bus";
109		interrupt-parent = <&gic>;
110		ranges;
111
112		eth0: ethernet@c3700000 {
113			compatible = "cdns,gem";
114			reg = <0x0 0xc3700000 0x1000>;
115			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
116			clocks = <&clk_bus>, <&clk_bus>;
117			clock-names = "hclk", "pclk";
118			phy-mode = "rmii";
119			/* Filled in by boot */
120			mac-address = [ 00 00 00 00 00 00 ];
121		};
122	};
123
124	amba {
125		#address-cells = <2>;
126		#size-cells = <1>;
127		#interrupt-cells = <3>;
128
129		compatible = "simple-bus";
130		interrupt-parent = <&gic>;
131		ranges;
132
133		timers: timer@fd100000 {
134			compatible = "arm,sp804", "arm,primecell";
135			reg = <0x0 0xfd100000 0x1000>;
136			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
137			clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
138			clock-names = "timer0clk", "timer1clk", "apb_pclk";
139		};
140		wdog: watchdog@fd200000 {
141			compatible = "arm,sp805", "arm,primecell";
142			reg = <0x0 0xfd200000 0x1000>;
143			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
144			clocks = <&clk_bus>, <&clk_bus>;
145			clock-names = "wdog_clk", "apb_pclk";
146		};
147		uart0: serial@fe000000 {
148			compatible = "arm,pl011", "arm,primecell";
149			reg = <0x0 0xfe000000 0x1000>;
150			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
151			clocks = <&clk_bus>;
152			clock-names = "apb_pclk";
153			status="disabled";
154		};
155		uart1: serial@fe100000 {
156			compatible = "arm,pl011", "arm,primecell";
157			reg = <0x0 0xfe100000 0x1000>;
158			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
159			clocks = <&clk_bus>;
160			clock-names = "apb_pclk";
161			status="disabled";
162		};
163		uart2: serial@fe200000 {
164			compatible = "arm,pl011", "arm,primecell";
165			reg = <0x0 0xfe200000 0x1000>;
166			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
167			clocks = <&clk_bus>;
168			clock-names = "apb_pclk";
169			status="disabled";
170		};
171		spi0: spi@fe800000 {
172			compatible = "arm,pl022", "arm,primecell";
173			reg = <0x0 0xfe800000 0x1000>;
174			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
175			clocks = <&clk_bus>;
176			clock-names = "apb_pclk";
177		};
178		spi1: spi@fe900000 {
179			compatible = "arm,pl022", "arm,primecell";
180			reg = <0x0 0xfe900000 0x1000>;
181			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
182			clocks = <&clk_bus>;
183			clock-names = "apb_pclk";
184		};
185		dmac0: dma@c1128000 {
186			compatible = "arm,pl330", "arm,primecell";
187			reg = <0x0 0xc1128000 0x1000>;
188			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
189			clocks = <&clk_bus>;
190			clock-names = "apb_pclk";
191		};
192		gpio0: gpio@fd400000 {
193			#gpio-cells = <2>;
194			compatible = "arm,pl061", "arm,primecell";
195			gpio-controller;
196			reg = <0x0 0xfd400000 0x1000>;
197			clocks = <&clk_bus>;
198			clock-names = "apb_pclk";
199			status="disabled";
200		};
201		gpio1: gpio@fd410000 {
202			#gpio-cells = <2>;
203			compatible = "arm,pl061", "arm,primecell";
204			gpio-controller;
205			reg = <0x0 0xfd410000 0x1000>;
206			clocks = <&clk_bus>;
207			clock-names = "apb_pclk";
208			status="disabled";
209		};
210		gpio2: gpio@fd420000 {
211			#gpio-cells = <2>;
212			compatible = "arm,pl061", "arm,primecell";
213			gpio-controller;
214			reg = <0x0 0xfd420000 0x1000>;
215			clocks = <&clk_bus>;
216			clock-names = "apb_pclk";
217			status="disabled";
218		};
219		gpio3: gpio@fd430000 {
220			#gpio-cells = <2>;
221			compatible = "arm,pl061", "arm,primecell";
222			gpio-controller;
223			reg = <0x0 0xfd430000 0x1000>;
224			clocks = <&clk_bus>;
225			clock-names = "apb_pclk";
226		};
227		gpio4: gpio@fd440000 {
228			#gpio-cells = <2>;
229			compatible = "arm,pl061", "arm,primecell";
230			gpio-controller;
231			reg = <0x0 0xfd440000 0x1000>;
232			clocks = <&clk_bus>;
233			clock-names = "apb_pclk";
234			status="disabled";
235		};
236		gpio5: gpio@fd450000 {
237			#gpio-cells = <2>;
238			compatible = "arm,pl061", "arm,primecell";
239			gpio-controller;
240			reg = <0x0 0xfd450000 0x1000>;
241			clocks = <&clk_bus>;
242			clock-names = "apb_pclk";
243			status="disabled";
244		};
245		gpio6: gpio@fd460000 {
246			#gpio-cells = <2>;
247			compatible = "arm,pl061", "arm,primecell";
248			gpio-controller;
249			reg = <0x0 0xfd460000 0x1000>;
250			clocks = <&clk_bus>;
251			clock-names = "apb_pclk";
252			status="disabled";
253		};
254		gpio7: gpio@fd470000 {
255			#gpio-cells = <2>;
256			compatible = "arm,pl061", "arm,primecell";
257			gpio-controller;
258			reg = <0x0 0xfd470000 0x1000>;
259			clocks = <&clk_bus>;
260			clock-names = "apb_pclk";
261			status="disabled";
262		};
263		gpio8: gpio@fd480000 {
264			#gpio-cells = <2>;
265			compatible = "arm,pl061", "arm,primecell";
266			gpio-controller;
267			reg = <0x0 0xfd480000 0x1000>;
268			clocks = <&clk_bus>;
269			clock-names = "apb_pclk";
270			status="disabled";
271		};
272		gpio9: gpio@fd490000 {
273			#gpio-cells = <2>;
274			compatible = "arm,pl061", "arm,primecell";
275			gpio-controller;
276			reg = <0x0 0xfd490000 0x1000>;
277			clocks = <&clk_bus>;
278			clock-names = "apb_pclk";
279			status="disabled";
280		};
281		gpio10: gpio@fd4a0000 {
282			#gpio-cells = <2>;
283			compatible = "arm,pl061", "arm,primecell";
284			gpio-controller;
285			reg = <0x0 0xfd4a0000 0x1000>;
286			clocks = <&clk_bus>;
287			clock-names = "apb_pclk";
288			status="disabled";
289		};
290		gpio11: gpio@fd4b0000 {
291			#gpio-cells = <2>;
292			compatible = "arm,pl061", "arm,primecell";
293			gpio-controller;
294			reg = <0x0 0xfd4b0000 0x1000>;
295			clocks = <&clk_bus>;
296			clock-names = "apb_pclk";
297		};
298		gpio12: gpio@fd4c0000 {
299			#gpio-cells = <2>;
300			compatible = "arm,pl061", "arm,primecell";
301			gpio-controller;
302			reg = <0x0 0xfd4c0000 0x1000>;
303			clocks = <&clk_bus>;
304			clock-names = "apb_pclk";
305			status="disabled";
306		};
307		gpio13: gpio@fd4d0000 {
308			#gpio-cells = <2>;
309			compatible = "arm,pl061", "arm,primecell";
310			gpio-controller;
311			reg = <0x0 0xfd4d0000 0x1000>;
312			clocks = <&clk_bus>;
313			clock-names = "apb_pclk";
314			status="disabled";
315		};
316		gpio14: gpio@fd4e0000 {
317			#gpio-cells = <2>;
318			compatible = "arm,pl061", "arm,primecell";
319			gpio-controller;
320			reg = <0x0 0xfd4e0000 0x1000>;
321			clocks = <&clk_bus>;
322			clock-names = "apb_pclk";
323			status="disabled";
324		};
325		gpio15: gpio@fd4f0000 {
326			#gpio-cells = <2>;
327			compatible = "arm,pl061", "arm,primecell";
328			gpio-controller;
329			reg = <0x0 0xfd4f0000 0x1000>;
330			clocks = <&clk_bus>;
331			clock-names = "apb_pclk";
332			status="disabled";
333		};
334		gpio16: gpio@fd500000 {
335			#gpio-cells = <2>;
336			compatible = "arm,pl061", "arm,primecell";
337			gpio-controller;
338			reg = <0x0 0xfd500000 0x1000>;
339			clocks = <&clk_bus>;
340			clock-names = "apb_pclk";
341			status="disabled";
342		};
343		gpio17: gpio@fd510000 {
344			#gpio-cells = <2>;
345			compatible = "arm,pl061", "arm,primecell";
346			gpio-controller;
347			reg = <0x0 0xfd510000 0x1000>;
348			clocks = <&clk_bus>;
349			clock-names = "apb_pclk";
350		};
351	};
352};
353