xref: /openbmc/linux/arch/arm64/boot/dts/lg/lg1312.dtsi (revision 56a0eccd)
1/*
2 * dts file for lg1312 SoC
3 *
4 * Copyright (C) 2016, LG Electronics
5 */
6
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9
10/ {
11	#address-cells = <2>;
12	#size-cells = <2>;
13
14	compatible = "lge,lg1312";
15	interrupt-parent = <&gic>;
16
17	cpus {
18		#address-cells = <2>;
19		#size-cells = <0>;
20
21		cpu0: cpu@0 {
22			device_type = "cpu";
23			compatible = "arm,cortex-a53", "arm,armv8";
24			reg = <0x0 0x0>;
25			next-level-cache = <&L2_0>;
26		};
27		cpu1: cpu@1 {
28			device_type = "cpu";
29			compatible = "arm,cortex-a53", "arm,armv8";
30			reg = <0x0 0x1>;
31			enable-method = "psci";
32			next-level-cache = <&L2_0>;
33		};
34		cpu2: cpu@2 {
35			device_type = "cpu";
36			compatible = "arm,cortex-a53", "arm,armv8";
37			reg = <0x0 0x2>;
38			enable-method = "psci";
39			next-level-cache = <&L2_0>;
40		};
41		cpu3: cpu@3 {
42			device_type = "cpu";
43			compatible = "arm,cortex-a53", "arm,armv8";
44			reg = <0x0 0x3>;
45			enable-method = "psci";
46			next-level-cache = <&L2_0>;
47		};
48		L2_0: l2-cache0 {
49			compatible = "cache";
50		};
51	};
52
53	psci {
54		compatible  = "arm,psci-0.2", "arm,psci";
55		method = "smc";
56		cpu_suspend = <0x84000001>;
57		cpu_off = <0x84000002>;
58		cpu_on = <0x84000003>;
59	};
60
61	gic: interrupt-controller@c0001000 {
62		#interrupt-cells = <3>;
63		compatible = "arm,gic-400";
64		interrupt-controller;
65		reg = <0x0 0xc0001000 0x1000>,
66		      <0x0 0xc0002000 0x2000>,
67		      <0x0 0xc0004000 0x2000>,
68		      <0x0 0xc0006000 0x2000>;
69	};
70
71	pmu {
72		compatible = "arm,cortex-a53-pmu";
73		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
74			     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
75			     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
76			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
77		interrupt-affinity = <&cpu0>,
78				     <&cpu1>,
79				     <&cpu2>,
80				     <&cpu3>;
81	};
82
83	timer {
84		compatible = "arm,armv8-timer";
85		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
86			      IRQ_TYPE_LEVEL_LOW)>,
87			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
88			      IRQ_TYPE_LEVEL_LOW)>,
89			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
90			      IRQ_TYPE_LEVEL_LOW)>,
91			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
92			      IRQ_TYPE_LEVEL_LOW)>;
93	};
94
95	clk_bus: clk_bus {
96		#clock-cells = <0>;
97
98		compatible = "fixed-clock";
99		clock-frequency = <198000000>;
100		clock-output-names = "BUSCLK";
101	};
102
103	soc {
104		#address-cells = <2>;
105		#size-cells = <1>;
106
107		compatible = "simple-bus";
108		interrupt-parent = <&gic>;
109		ranges;
110
111		eth0: ethernet@c1b00000 {
112			compatible = "cdns,gem";
113			reg = <0x0 0xc1b00000 0x1000>;
114			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
115			clocks = <&clk_bus>, <&clk_bus>;
116			clock-names = "hclk", "pclk";
117			phy-mode = "rmii";
118			/* Filled in by boot */
119			mac-address = [ 00 00 00 00 00 00 ];
120		};
121	};
122
123	amba {
124		#address-cells = <2>;
125		#size-cells = <1>;
126		#interrupts-cells = <3>;
127
128		compatible = "arm,amba-bus";
129		interrupt-parent = <&gic>;
130		ranges;
131
132		timers: timer@fd100000 {
133			compatible = "arm,sp804";
134			reg = <0x0 0xfd100000 0x1000>;
135			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
136			clocks = <&clk_bus>;
137			clock-names = "apb_pclk";
138		};
139		wdog: watchdog@fd200000 {
140			compatible = "arm,sp805", "arm,primecell";
141			reg = <0x0 0xfd200000 0x1000>;
142			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
143			clocks = <&clk_bus>;
144			clock-names = "apb_pclk";
145		};
146		uart0: serial@fe000000 {
147			compatible = "arm,pl011", "arm,primecell";
148			reg = <0x0 0xfe000000 0x1000>;
149			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
150			clocks = <&clk_bus>;
151			clock-names = "apb_pclk";
152			status="disabled";
153		};
154		uart1: serial@fe100000 {
155			compatible = "arm,pl011", "arm,primecell";
156			reg = <0x0 0xfe100000 0x1000>;
157			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
158			clocks = <&clk_bus>;
159			clock-names = "apb_pclk";
160			status="disabled";
161		};
162		uart2: serial@fe200000 {
163			compatible = "arm,pl011", "arm,primecell";
164			reg = <0x0 0xfe200000 0x1000>;
165			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
166			clocks = <&clk_bus>;
167			clock-names = "apb_pclk";
168			status="disabled";
169		};
170		spi0: ssp@fe800000 {
171			compatible = "arm,pl022", "arm,primecell";
172			reg = <0x0 0xfe800000 0x1000>;
173			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
174			clocks = <&clk_bus>;
175			clock-names = "apb_pclk";
176		};
177		spi1: ssp@fe900000 {
178			compatible = "arm,pl022", "arm,primecell";
179			reg = <0x0 0xfe900000 0x1000>;
180			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
181			clocks = <&clk_bus>;
182			clock-names = "apb_pclk";
183		};
184		dmac0: dma@c1128000 {
185			compatible = "arm,pl330", "arm,primecell";
186			reg = <0x0 0xc1128000 0x1000>;
187			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
188			clocks = <&clk_bus>;
189			clock-names = "apb_pclk";
190		};
191		gpio0: gpio@fd400000 {
192			#gpio-cells = <2>;
193			compatible = "arm,pl061", "arm,primecell";
194			gpio-controller;
195			reg = <0x0 0xfd400000 0x1000>;
196			clocks = <&clk_bus>;
197			clock-names = "apb_pclk";
198			status="disabled";
199		};
200		gpio1: gpio@fd410000 {
201			#gpio-cells = <2>;
202			compatible = "arm,pl061", "arm,primecell";
203			gpio-controller;
204			reg = <0x0 0xfd410000 0x1000>;
205			clocks = <&clk_bus>;
206			clock-names = "apb_pclk";
207			status="disabled";
208		};
209		gpio2: gpio@fd420000 {
210			#gpio-cells = <2>;
211			compatible = "arm,pl061", "arm,primecell";
212			gpio-controller;
213			reg = <0x0 0xfd420000 0x1000>;
214			clocks = <&clk_bus>;
215			clock-names = "apb_pclk";
216			status="disabled";
217		};
218		gpio3: gpio@fd430000 {
219			#gpio-cells = <2>;
220			compatible = "arm,pl061", "arm,primecell";
221			gpio-controller;
222			reg = <0x0 0xfd430000 0x1000>;
223			clocks = <&clk_bus>;
224			clock-names = "apb_pclk";
225		};
226		gpio4: gpio@fd440000 {
227			#gpio-cells = <2>;
228			compatible = "arm,pl061", "arm,primecell";
229			gpio-controller;
230			reg = <0x0 0xfd440000 0x1000>;
231			clocks = <&clk_bus>;
232			clock-names = "apb_pclk";
233			status="disabled";
234		};
235		gpio5: gpio@fd450000 {
236			#gpio-cells = <2>;
237			compatible = "arm,pl061", "arm,primecell";
238			gpio-controller;
239			reg = <0x0 0xfd450000 0x1000>;
240			clocks = <&clk_bus>;
241			clock-names = "apb_pclk";
242			status="disabled";
243		};
244		gpio6: gpio@fd460000 {
245			#gpio-cells = <2>;
246			compatible = "arm,pl061", "arm,primecell";
247			gpio-controller;
248			reg = <0x0 0xfd460000 0x1000>;
249			clocks = <&clk_bus>;
250			clock-names = "apb_pclk";
251			status="disabled";
252		};
253		gpio7: gpio@fd470000 {
254			#gpio-cells = <2>;
255			compatible = "arm,pl061", "arm,primecell";
256			gpio-controller;
257			reg = <0x0 0xfd470000 0x1000>;
258			clocks = <&clk_bus>;
259			clock-names = "apb_pclk";
260			status="disabled";
261		};
262		gpio8: gpio@fd480000 {
263			#gpio-cells = <2>;
264			compatible = "arm,pl061", "arm,primecell";
265			gpio-controller;
266			reg = <0x0 0xfd480000 0x1000>;
267			clocks = <&clk_bus>;
268			clock-names = "apb_pclk";
269			status="disabled";
270		};
271		gpio9: gpio@fd490000 {
272			#gpio-cells = <2>;
273			compatible = "arm,pl061", "arm,primecell";
274			gpio-controller;
275			reg = <0x0 0xfd490000 0x1000>;
276			clocks = <&clk_bus>;
277			clock-names = "apb_pclk";
278			status="disabled";
279		};
280		gpio10: gpio@fd4a0000 {
281			#gpio-cells = <2>;
282			compatible = "arm,pl061", "arm,primecell";
283			gpio-controller;
284			reg = <0x0 0xfd4a0000 0x1000>;
285			clocks = <&clk_bus>;
286			clock-names = "apb_pclk";
287			status="disabled";
288		};
289		gpio11: gpio@fd4b0000 {
290			#gpio-cells = <2>;
291			compatible = "arm,pl061", "arm,primecell";
292			gpio-controller;
293			reg = <0x0 0xfd4b0000 0x1000>;
294			clocks = <&clk_bus>;
295			clock-names = "apb_pclk";
296		};
297		gpio12: gpio@fd4c0000 {
298			#gpio-cells = <2>;
299			compatible = "arm,pl061", "arm,primecell";
300			gpio-controller;
301			reg = <0x0 0xfd4c0000 0x1000>;
302			clocks = <&clk_bus>;
303			clock-names = "apb_pclk";
304			status="disabled";
305		};
306		gpio13: gpio@fd4d0000 {
307			#gpio-cells = <2>;
308			compatible = "arm,pl061", "arm,primecell";
309			gpio-controller;
310			reg = <0x0 0xfd4d0000 0x1000>;
311			clocks = <&clk_bus>;
312			clock-names = "apb_pclk";
313			status="disabled";
314		};
315		gpio14: gpio@fd4e0000 {
316			#gpio-cells = <2>;
317			compatible = "arm,pl061", "arm,primecell";
318			gpio-controller;
319			reg = <0x0 0xfd4e0000 0x1000>;
320			clocks = <&clk_bus>;
321			clock-names = "apb_pclk";
322			status="disabled";
323		};
324		gpio15: gpio@fd4f0000 {
325			#gpio-cells = <2>;
326			compatible = "arm,pl061", "arm,primecell";
327			gpio-controller;
328			reg = <0x0 0xfd4f0000 0x1000>;
329			clocks = <&clk_bus>;
330			clock-names = "apb_pclk";
331			status="disabled";
332		};
333		gpio16: gpio@fd500000 {
334			#gpio-cells = <2>;
335			compatible = "arm,pl061", "arm,primecell";
336			gpio-controller;
337			reg = <0x0 0xfd500000 0x1000>;
338			clocks = <&clk_bus>;
339			clock-names = "apb_pclk";
340			status="disabled";
341		};
342		gpio17: gpio@fd510000 {
343			#gpio-cells = <2>;
344			compatible = "arm,pl061", "arm,primecell";
345			gpio-controller;
346			reg = <0x0 0xfd510000 0x1000>;
347			clocks = <&clk_bus>;
348			clock-names = "apb_pclk";
349		};
350	};
351};
352