1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2015-2016 Freescale Semiconductor, Inc.
4 * Copyright 2016-2018 NXP
5 */
6
7#include <dt-bindings/interrupt-controller/arm-gic.h>
8
9/memreserve/ 0x80000000 0x00010000;
10
11/ {
12	compatible = "fsl,s32v234";
13	interrupt-parent = <&gic>;
14	#address-cells = <2>;
15	#size-cells = <2>;
16
17	aliases {
18		serial0 = &uart0;
19		serial1 = &uart1;
20	};
21
22	cpus {
23		#address-cells = <2>;
24		#size-cells = <0>;
25
26		cpu0: cpu@0 {
27			device_type = "cpu";
28			compatible = "arm,cortex-a53";
29			reg = <0x0 0x0>;
30			enable-method = "spin-table";
31			cpu-release-addr = <0x0 0x80000000>;
32			next-level-cache = <&cluster0_l2_cache>;
33		};
34
35		cpu1: cpu@1 {
36			device_type = "cpu";
37			compatible = "arm,cortex-a53";
38			reg = <0x0 0x1>;
39			enable-method = "spin-table";
40			cpu-release-addr = <0x0 0x80000000>;
41			next-level-cache = <&cluster0_l2_cache>;
42		};
43
44		cpu2: cpu@100 {
45			device_type = "cpu";
46			compatible = "arm,cortex-a53";
47			reg = <0x0 0x100>;
48			enable-method = "spin-table";
49			cpu-release-addr = <0x0 0x80000000>;
50			next-level-cache = <&cluster1_l2_cache>;
51		};
52
53		cpu3: cpu@101 {
54			device_type = "cpu";
55			compatible = "arm,cortex-a53";
56			reg = <0x0 0x101>;
57			enable-method = "spin-table";
58			cpu-release-addr = <0x0 0x80000000>;
59			next-level-cache = <&cluster1_l2_cache>;
60		};
61
62		cluster0_l2_cache: l2-cache0 {
63			compatible = "cache";
64		};
65
66		cluster1_l2_cache: l2-cache1 {
67			compatible = "cache";
68		};
69	};
70
71	timer {
72		compatible = "arm,armv8-timer";
73		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
74					  IRQ_TYPE_LEVEL_LOW)>,
75			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
76					  IRQ_TYPE_LEVEL_LOW)>,
77			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
78					  IRQ_TYPE_LEVEL_LOW)>,
79			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
80					  IRQ_TYPE_LEVEL_LOW)>;
81		/* clock-frequency might be modified by u-boot, depending on the
82		 * chip version.
83		 */
84		clock-frequency = <10000000>;
85	};
86
87	gic: interrupt-controller@7d001000 {
88		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
89		#interrupt-cells = <3>;
90		#address-cells = <0>;
91		interrupt-controller;
92		reg = <0 0x7d001000 0 0x1000>,
93		      <0 0x7d002000 0 0x2000>,
94		      <0 0x7d004000 0 0x2000>,
95		      <0 0x7d006000 0 0x2000>;
96		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
97					 IRQ_TYPE_LEVEL_HIGH)>;
98	};
99
100	soc {
101		#address-cells = <2>;
102		#size-cells = <2>;
103		compatible = "simple-bus";
104		interrupt-parent = <&gic>;
105		ranges;
106
107		aips0: aips-bus@40000000 {
108			compatible = "simple-bus";
109			#address-cells = <2>;
110			#size-cells = <2>;
111			interrupt-parent = <&gic>;
112			reg = <0x0 0x40000000 0x0 0x7d000>;
113			ranges;
114
115			uart0: serial@40053000 {
116				compatible = "fsl,s32v234-linflexuart";
117				reg = <0x0 0x40053000 0x0 0x1000>;
118				interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
119				status = "disabled";
120			};
121		};
122
123		aips1: aips-bus@40080000 {
124			compatible = "simple-bus";
125			#address-cells = <2>;
126			#size-cells = <2>;
127			interrupt-parent = <&gic>;
128			reg = <0x0 0x40080000 0x0 0x70000>;
129			ranges;
130
131			uart1: serial@400bc000 {
132				compatible = "fsl,s32v234-linflexuart";
133				reg = <0x0 0x400bc000 0x0 0x1000>;
134				interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
135				status = "disabled";
136			};
137		};
138	};
139};
140