1// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
2/*
3 * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
4 * D-82229 Seefeld, Germany.
5 * Author: Markus Niebel
6 * Author: Alexander Stein
7 */
8/dts-v1/;
9
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/net/ti-dp83867.h>
13#include <dt-bindings/pwm/pwm.h>
14#include <dt-bindings/usb/pd.h>
15#include "imx93-tqma9352.dtsi"
16
17/{
18	model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
19	compatible = "tq,imx93-tqma9352-mba93xxla",
20		     "tq,imx93-tqma9352", "fsl,imx93";
21
22	chosen {
23		stdout-path = &lpuart1;
24	};
25
26	aliases {
27		eeprom0 = &eeprom0;
28		rtc0 = &pcf85063;
29		rtc1 = &bbnsm_rtc;
30	};
31
32	backlight_lvds: backlight {
33		compatible = "pwm-backlight";
34		pwms = <&tpm5 0 5000000 0>;
35		brightness-levels = <0 4 8 16 32 64 128 255>;
36		default-brightness-level = <7>;
37		power-supply = <&reg_12v0>;
38		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
39		status = "disabled";
40	};
41
42	clk_dp: clk-dp {
43		compatible = "fixed-clock";
44		#clock-cells = <0>;
45		clock-frequency = <26000000>;
46	};
47
48	gpio-keys {
49		compatible = "gpio-keys";
50		autorepeat;
51
52		switch-a {
53			label = "switcha";
54			linux,code = <BTN_0>;
55			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
56			wakeup-source;
57		};
58
59		switch-b {
60			label = "switchb";
61			linux,code = <BTN_1>;
62			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
63			wakeup-source;
64		};
65	};
66
67	gpio-leds {
68		compatible = "gpio-leds";
69
70		led-1 {
71			color = <LED_COLOR_ID_GREEN>;
72			function = LED_FUNCTION_STATUS;
73			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
74			linux,default-trigger = "default-on";
75		};
76
77		led-2 {
78			color = <LED_COLOR_ID_AMBER>;
79			function = LED_FUNCTION_HEARTBEAT;
80			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
81			linux,default-trigger = "heartbeat";
82		};
83	};
84
85	iio-hwmon {
86		compatible = "iio-hwmon";
87		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
88	};
89
90	reg_3v3: regulator-3v3 {
91		compatible = "regulator-fixed";
92		regulator-name = "V_3V3_MB";
93		regulator-min-microvolt = <3300000>;
94		regulator-max-microvolt = <3300000>;
95	};
96
97	reg_3v8: regulator-3v8 {
98		compatible = "regulator-fixed";
99		regulator-name = "V_3V8";
100		regulator-min-microvolt = <3800000>;
101		regulator-max-microvolt = <3800000>;
102		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
103		enable-active-high;
104		/* TODO: this is supply for IOT module */
105		regulator-always-on;
106	};
107
108	reg_5v0: regulator-5v0 {
109		compatible = "regulator-fixed";
110		regulator-name = "V_5V0_MB";
111		regulator-min-microvolt = <5000000>;
112		regulator-max-microvolt = <5000000>;
113	};
114
115	reg_12v0: regulator-12v0 {
116		compatible = "regulator-fixed";
117		regulator-name = "V_12V";
118		regulator-min-microvolt = <12000000>;
119		regulator-max-microvolt = <12000000>;
120		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
121		enable-active-high;
122	};
123};
124
125&adc1 {
126	status = "okay";
127};
128
129&eqos {
130	pinctrl-names = "default";
131	pinctrl-0 = <&pinctrl_eqos>;
132	phy-mode = "rgmii-id";
133	phy-handle = <&ethphy_eqos>;
134	status = "okay";
135
136	mdio {
137		compatible = "snps,dwmac-mdio";
138		#address-cells = <1>;
139		#size-cells = <0>;
140
141		ethphy_eqos: ethernet-phy@0 {
142			compatible = "ethernet-phy-ieee802.3-c22";
143			reg = <0>;
144			pinctrl-names = "default";
145			pinctrl-0 = <&pinctrl_eqos_phy>;
146			interrupt-parent = <&gpio3>;
147			interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
148			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
149			reset-assert-us = <500000>;
150			reset-deassert-us = <50000>;
151			enet-phy-lane-no-swap;
152			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
153			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
154			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
155			ti,dp83867-rxctrl-strap-quirk;
156			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
157		};
158	};
159};
160
161&fec {
162	pinctrl-names = "default";
163	pinctrl-0 = <&pinctrl_fec>;
164	phy-mode = "rgmii-id";
165	phy-handle = <&ethphy_fec>;
166	fsl,magic-packet;
167	status = "okay";
168
169	mdio {
170		#address-cells = <1>;
171		#size-cells = <0>;
172		clock-frequency = <5000000>;
173
174		ethphy_fec: ethernet-phy@0 {
175			compatible = "ethernet-phy-ieee802.3-c22";
176			reg = <0>;
177			pinctrl-names = "default";
178			pinctrl-0 = <&pinctrl_fec_phy>;
179			interrupt-parent = <&gpio3>;
180			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
181			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
182			reset-assert-us = <500000>;
183			reset-deassert-us = <50000>;
184			enet-phy-lane-no-swap;
185			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
186			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
187			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
188			ti,dp83867-rxctrl-strap-quirk;
189			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
190		};
191	};
192};
193
194&flexcan1 {
195	pinctrl-names = "default";
196	pinctrl-0 = <&pinctrl_flexcan1>;
197	xceiver-supply = <&reg_3v3>;
198	status = "okay";
199};
200
201&flexcan2 {
202	pinctrl-names = "default";
203	pinctrl-0 = <&pinctrl_flexcan2>;
204	xceiver-supply = <&reg_3v3>;
205	status = "okay";
206};
207
208&gpio1 {
209	expander-irq-hog {
210		gpio-hog;
211		gpios = <12 GPIO_ACTIVE_LOW>;
212		input;
213		line-name = "PEX_INT#";
214	};
215
216	rtc-irq-hog {
217		gpio-hog;
218		gpios = <14 GPIO_ACTIVE_LOW>;
219		input;
220		line-name = "RTC_EVENT#";
221	};
222};
223
224&gpio3 {
225	ethphy-eqos-irq-hog {
226		gpio-hog;
227		gpios = <26 GPIO_ACTIVE_LOW>;
228		input;
229		line-name = "ENET0_IRQ#";
230	};
231
232	ethphy-fec-irq-hog {
233		gpio-hog;
234		gpios = <27 GPIO_ACTIVE_LOW>;
235		input;
236		line-name = "ENET1_IRQ#";
237	};
238};
239
240&lpi2c3 {
241	#address-cells = <1>;
242	#size-cells = <0>;
243	clock-frequency = <400000>;
244	pinctrl-names = "default", "sleep";
245	pinctrl-0 = <&pinctrl_lpi2c3>;
246	pinctrl-1 = <&pinctrl_lpi2c3>;
247	status = "okay";
248
249	temperature-sensor@1c {
250		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
251		reg = <0x1c>;
252	};
253
254	eeprom2: eeprom@54 {
255		compatible = "nxp,se97b", "atmel,24c02";
256		reg = <0x54>;
257		pagesize = <16>;
258		vcc-supply = <&reg_3v3>;
259	};
260
261	expander0: gpio@70 {
262		compatible = "nxp,pca9538";
263		reg = <0x70>;
264		pinctrl-names = "default";
265		pinctrl-0 = <&pinctrl_pexp_irq>;
266		gpio-controller;
267		#gpio-cells = <2>;
268		interrupt-controller;
269		#interrupt-cells = <2>;
270		interrupt-parent = <&gpio1>;
271		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
272		vcc-supply = <&reg_3v3>;
273		gpio-line-names = "3V8_EN", "",
274				  "", "IOT_PWRKEY",
275				  "IOT_RESET", "IOT_W_DISABLE",
276				  "BUTTON_A#", "BUTTON_B#";
277
278		/*
279		 * Controls the IOT W_DISABLE pin which is low active
280		 * as disable signal but inverted as seen from the CPU.
281		 * The output-low states, the signal is
282		 * inactive, e.g. not disabled
283		 */
284		iot_wdisable_hog: iot-wdisable-hog {
285			gpio-hog;
286			gpios = <5 GPIO_ACTIVE_HIGH>;
287			output-low;
288			line-name = "IOT_W_DISABLE";
289		};
290	};
291
292	expander1: gpio@71 {
293		compatible = "nxp,pca9538";
294		reg = <0x71>;
295		gpio-controller;
296		#gpio-cells = <2>;
297		vcc-supply = <&reg_3v3>;
298		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
299				  "USB_RESET#", "",
300				  "WLAN_PD#", "WLAN_W_DISABLE#",
301				  "WLAN_PERST#", "12V_EN";
302
303		/*
304		 * Controls the WiFi card PD pin which is low active
305		 * as power down signal. The output-low states, the signal
306		 * is inactive, e.g. not power down
307		 */
308		wlan-pd-hog {
309			gpio-hog;
310			gpios = <4 GPIO_ACTIVE_LOW>;
311			output-low;
312			line-name = "WLAN_PD#";
313		};
314
315		/*
316		 * Controls the WiFi card disable pin which is low active
317		 * as disable signal. The output-low states, the signal
318		 * is inactive, e.g. not disabled
319		 */
320		wlan-wdisable-hog {
321			gpio-hog;
322			gpios = <5 GPIO_ACTIVE_LOW>;
323			output-low;
324			line-name = "WLAN_W_DISABLE#";
325		};
326
327		/*
328		 * Controls the WiFi card reset pin which is low active
329		 * as reset signal. The output-low states, the signal
330		 * is inactive, e.g. not in reset
331		 */
332		wlan-perst-hog {
333			gpio-hog;
334			gpios = <6 GPIO_ACTIVE_LOW>;
335			output-low;
336			line-name = "WLAN_PERST#";
337		};
338	};
339
340	expander2: gpio@72 {
341		compatible = "nxp,pca9538";
342		reg = <0x72>;
343		gpio-controller;
344		#gpio-cells = <2>;
345		vcc-supply = <&reg_3v3>;
346		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
347				  "LCD_BL_EN", "DP_EN",
348				  "MIPI_CSI_EN", "MIPI_CSI_RST#",
349				  "USER_LED1", "USER_LED2";
350	};
351};
352
353&lpi2c5 {
354	#address-cells = <1>;
355	#size-cells = <0>;
356	clock-frequency = <400000>;
357	pinctrl-names = "default", "sleep";
358	pinctrl-0 = <&pinctrl_lpi2c5>;
359	pinctrl-1 = <&pinctrl_lpi2c5>;
360	status = "okay";
361
362	dp_bridge: dp-bridge@f {
363		compatible = "toshiba,tc9595", "toshiba,tc358767";
364		reg = <0x0f>;
365		pinctrl-names = "default";
366		pinctrl-0 = <&pinctrl_tc9595>;
367		clock-names = "ref";
368		clocks = <&clk_dp>;
369		reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
370		interrupt-parent = <&gpio4>;
371		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
372		toshiba,hpd-pin = <0>;
373		status = "disabled";
374
375		ports {
376			#address-cells = <1>;
377			#size-cells = <0>;
378
379			port@0 {
380				reg = <0>;
381
382				dp_dsi_in: endpoint {
383					data-lanes = <1 2 3 4>;
384				};
385			};
386		};
387	};
388};
389
390&lpuart1 {
391	pinctrl-names = "default";
392	pinctrl-0 = <&pinctrl_uart1>;
393	status = "okay";
394};
395
396&lpuart2 {
397	pinctrl-names = "default";
398	pinctrl-0 = <&pinctrl_uart2>;
399	linux,rs485-enabled-at-boot-time;
400	status = "okay";
401};
402
403/* disabled per default, console for M33 */
404&lpuart3 {
405	pinctrl-names = "default";
406	pinctrl-0 = <&pinctrl_uart3>;
407	status = "disabled";
408};
409
410&lpuart6 {
411	pinctrl-names = "default";
412	pinctrl-0 = <&pinctrl_uart6>;
413	status = "okay";
414};
415
416&lpuart8 {
417	pinctrl-names = "default";
418	pinctrl-0 = <&pinctrl_uart8>;
419	status = "okay";
420};
421
422&pcf85063 {
423	/* RTC_EVENT# is connected on MBa93xxLA */
424	pinctrl-names = "default";
425	pinctrl-0 = <&pinctrl_pcf85063>;
426	interrupt-parent = <&gpio1>;
427	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
428};
429
430&tpm5 {
431	pinctrl-names = "default";
432	pinctrl-0 = <&pinctrl_tpm5>;
433};
434
435&usdhc2 {
436	pinctrl-names = "default", "state_100mhz", "state_200mhz";
437	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
438	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
439	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
440	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
441	vmmc-supply = <&reg_usdhc2_vmmc>;
442	bus-width = <4>;
443	no-sdio;
444	no-mmc;
445	disable-wp;
446	status = "okay";
447};
448
449&iomuxc {
450	pinctrl_eqos: eqosgrp {
451		fsl,pins = <
452			/* PD | FSEL_2 | DSE X4 */
453			MX93_PAD_ENET1_MDC__ENET_QOS_MDC		0x51e
454			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO		0x4000051e
455			/* PD | FSEL_2 | DSE X6 */
456			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0		0x57e
457			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1		0x57e
458			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2		0x57e
459			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3		0x57e
460			/* PD | FSEL_3 | DSE X6 */
461			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x5fe
462			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x57e
463			/* PD | FSEL_2 | DSE X4 */
464			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0		0x51e
465			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1		0x51e
466			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2		0x51e
467			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3		0x51e
468			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x51e
469			/* PD | FSEL_3 | DSE X3 */
470			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e
471		>;
472	};
473
474	pinctrl_eqos_phy: eqosphygrp {
475		fsl,pins = <
476			MX93_PAD_CCM_CLKO1__GPIO3_IO26		0x1306
477		>;
478	};
479
480	pinctrl_fec: fecgrp {
481		fsl,pins = <
482			/* PD | FSEL_2 | DSE X4 */
483			MX93_PAD_ENET2_MDC__ENET1_MDC			0x51e
484			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x4000051e
485			/* PD | FSEL_2 | DSE X6 */
486			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
487			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
488			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2		0x57e
489			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3		0x57e
490			/* PD | FSEL_3 | DSE X6 */
491			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC		0x5fe
492			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
493			/* PD | FSEL_2 | DSE X4 */
494			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x51e
495			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x51e
496			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2		0x51e
497			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3		0x51e
498			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x51e
499			/* PD | FSEL_3 | DSE X3 */
500			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC		0x58e
501		>;
502	};
503
504	pinctrl_fec_phy: fecphygrp {
505		fsl,pins = <
506			MX93_PAD_CCM_CLKO2__GPIO3_IO27		0x1306
507		>;
508	};
509
510	pinctrl_flexcan1: flexcan1grp {
511		fsl,pins = <
512			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
513			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
514		>;
515	};
516
517	pinctrl_flexcan2: flexcan2grp {
518		fsl,pins = <
519			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
520			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
521		>;
522	};
523
524	pinctrl_lpi2c3: lpi2c3grp {
525		fsl,pins = <
526			MX93_PAD_GPIO_IO28__LPI2C3_SDA		0x40000b9e
527			MX93_PAD_GPIO_IO29__LPI2C3_SCL		0x40000b9e
528		>;
529	};
530
531	pinctrl_lpi2c5: lpi2c5grp {
532		fsl,pins = <
533			MX93_PAD_GPIO_IO22__LPI2C5_SDA		0x40000b9e
534			MX93_PAD_GPIO_IO23__LPI2C5_SCL		0x40000b9e
535		>;
536	};
537
538	pinctrl_pcf85063: pcf85063grp {
539		fsl,pins = <
540			MX93_PAD_SAI1_RXD0__GPIO1_IO14		0x1306
541		>;
542	};
543
544	pinctrl_pexp_irq: pexpirqgrp {
545		fsl,pins = <
546			MX93_PAD_SAI1_TXC__GPIO1_IO12		0x1306
547		>;
548	};
549
550	pinctrl_tc9595: tc9595-grp {
551		fsl,pins = <
552			/* DP_IRQ */
553			MX93_PAD_CCM_CLKO4__GPIO4_IO29		0x1306
554		>;
555	};
556
557	pinctrl_tpm5: tpm5grp {
558		fsl,pins = <
559			MX93_PAD_GPIO_IO06__TPM5_CH0		0x57e
560		>;
561	};
562
563	pinctrl_typec: typecgrp {
564		fsl,pins = <
565			MX93_PAD_I2C2_SCL__GPIO1_IO02		0x1306
566		>;
567	};
568
569	pinctrl_uart1: uart1grp {
570		fsl,pins = <
571			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
572			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
573		>;
574	};
575
576	pinctrl_uart2: uart2grp {
577		fsl,pins = <
578			MX93_PAD_UART2_TXD__LPUART2_TX		0x31e
579			MX93_PAD_UART2_RXD__LPUART2_RX		0x31e
580			MX93_PAD_SAI1_TXD0__LPUART2_RTS_B	0x51e
581		>;
582	};
583
584	pinctrl_uart3: uart3grp {
585		fsl,pins = <
586			MX93_PAD_GPIO_IO14__LPUART3_TX		0x31e
587			MX93_PAD_GPIO_IO15__LPUART3_RX		0x31e
588		>;
589	};
590
591	pinctrl_uart6: uart6grp {
592		fsl,pins = <
593			MX93_PAD_GPIO_IO04__LPUART6_TX		0x31e
594			MX93_PAD_GPIO_IO05__LPUART6_RX		0x31e
595		>;
596	};
597
598	pinctrl_uart8: uart8grp {
599		fsl,pins = <
600			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
601			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
602		>;
603	};
604
605	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
606		fsl,pins = <
607			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
608		>;
609	};
610
611	pinctrl_usdhc2_hs: usdhc2hsgrp {
612		fsl,pins = <
613			/* HYS | PD | PU | FSEL_3 | DSE X5 */
614			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17be
615			/* HYS | PD | PU | FSEL_3 | DSE X4 */
616			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
617			/* HYS | PD | PU | FSEL_3 | DSE X3 */
618			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x138e
619			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x138e
620			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x138e
621			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x138e
622			/* PD | PU | FSEL_2 | DSE X3 */
623			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
624		>;
625	};
626
627	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
628		fsl,pins = <
629			/* HYS | PD | PU | FSEL_3 | DSE X6 */
630			MX93_PAD_SD2_CLK__USDHC2_CLK		0x17fe
631			/* HYS | PD | PU | FSEL_3 | DSE X4 */
632			MX93_PAD_SD2_CMD__USDHC2_CMD		0x139e
633			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x139e
634			MX93_PAD_SD2_DATA1__USDHC2_DATA1	0x139e
635			MX93_PAD_SD2_DATA2__USDHC2_DATA2	0x139e
636			MX93_PAD_SD2_DATA3__USDHC2_DATA3	0x139e
637			/* PD | PU | FSEL_2 | DSE X3 */
638			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x50e
639		>;
640	};
641};
642