1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * Copyright (C) 2016 Freescale Semiconductor, Inc. 4 * Copyright 2017-2018 NXP 5 * Dong Aisheng <aisheng.dong@nxp.com> 6 */ 7 8#include <dt-bindings/clock/imx8-clock.h> 9#include <dt-bindings/firmware/imx/rsrc.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/interrupt-controller/arm-gic.h> 12#include <dt-bindings/pinctrl/pads-imx8qxp.h> 13 14/ { 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 gpio0 = &lsio_gpio0; 21 gpio1 = &lsio_gpio1; 22 gpio2 = &lsio_gpio2; 23 gpio3 = &lsio_gpio3; 24 gpio4 = &lsio_gpio4; 25 gpio5 = &lsio_gpio5; 26 gpio6 = &lsio_gpio6; 27 gpio7 = &lsio_gpio7; 28 mmc0 = &usdhc1; 29 mmc1 = &usdhc2; 30 mmc2 = &usdhc3; 31 mu1 = &lsio_mu1; 32 serial0 = &adma_lpuart0; 33 }; 34 35 cpus { 36 #address-cells = <2>; 37 #size-cells = <0>; 38 39 /* We have 1 clusters with 4 Cortex-A35 cores */ 40 A35_0: cpu@0 { 41 device_type = "cpu"; 42 compatible = "arm,cortex-a35"; 43 reg = <0x0 0x0>; 44 enable-method = "psci"; 45 next-level-cache = <&A35_L2>; 46 clocks = <&clk IMX_A35_CLK>; 47 operating-points-v2 = <&a35_opp_table>; 48 #cooling-cells = <2>; 49 }; 50 51 A35_1: cpu@1 { 52 device_type = "cpu"; 53 compatible = "arm,cortex-a35"; 54 reg = <0x0 0x1>; 55 enable-method = "psci"; 56 next-level-cache = <&A35_L2>; 57 clocks = <&clk IMX_A35_CLK>; 58 operating-points-v2 = <&a35_opp_table>; 59 #cooling-cells = <2>; 60 }; 61 62 A35_2: cpu@2 { 63 device_type = "cpu"; 64 compatible = "arm,cortex-a35"; 65 reg = <0x0 0x2>; 66 enable-method = "psci"; 67 next-level-cache = <&A35_L2>; 68 clocks = <&clk IMX_A35_CLK>; 69 operating-points-v2 = <&a35_opp_table>; 70 #cooling-cells = <2>; 71 }; 72 73 A35_3: cpu@3 { 74 device_type = "cpu"; 75 compatible = "arm,cortex-a35"; 76 reg = <0x0 0x3>; 77 enable-method = "psci"; 78 next-level-cache = <&A35_L2>; 79 clocks = <&clk IMX_A35_CLK>; 80 operating-points-v2 = <&a35_opp_table>; 81 #cooling-cells = <2>; 82 }; 83 84 A35_L2: l2-cache0 { 85 compatible = "cache"; 86 }; 87 }; 88 89 a35_opp_table: opp-table { 90 compatible = "operating-points-v2"; 91 opp-shared; 92 93 opp-900000000 { 94 opp-hz = /bits/ 64 <900000000>; 95 opp-microvolt = <1000000>; 96 clock-latency-ns = <150000>; 97 }; 98 99 opp-1200000000 { 100 opp-hz = /bits/ 64 <1200000000>; 101 opp-microvolt = <1100000>; 102 clock-latency-ns = <150000>; 103 opp-suspend; 104 }; 105 }; 106 107 gic: interrupt-controller@51a00000 { 108 compatible = "arm,gic-v3"; 109 reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ 110 <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ 111 #interrupt-cells = <3>; 112 interrupt-controller; 113 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 114 }; 115 116 pmu { 117 compatible = "arm,armv8-pmuv3"; 118 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; 119 }; 120 121 psci { 122 compatible = "arm,psci-1.0"; 123 method = "smc"; 124 }; 125 126 scu { 127 compatible = "fsl,imx-scu"; 128 mbox-names = "tx0", "tx1", "tx2", "tx3", 129 "rx0", "rx1", "rx2", "rx3", 130 "gip3"; 131 mboxes = <&lsio_mu1 0 0 132 &lsio_mu1 0 1 133 &lsio_mu1 0 2 134 &lsio_mu1 0 3 135 &lsio_mu1 1 0 136 &lsio_mu1 1 1 137 &lsio_mu1 1 2 138 &lsio_mu1 1 3 139 &lsio_mu1 3 3>; 140 141 clk: clock-controller { 142 compatible = "fsl,imx8qxp-clk"; 143 #clock-cells = <1>; 144 clocks = <&xtal32k &xtal24m>; 145 clock-names = "xtal_32KHz", "xtal_24Mhz"; 146 }; 147 148 iomuxc: pinctrl { 149 compatible = "fsl,imx8qxp-iomuxc"; 150 }; 151 152 ocotp: imx8qx-ocotp { 153 compatible = "fsl,imx8qxp-scu-ocotp"; 154 #address-cells = <1>; 155 #size-cells = <1>; 156 }; 157 158 pd: imx8qx-pd { 159 compatible = "fsl,imx8qxp-scu-pd"; 160 #power-domain-cells = <1>; 161 }; 162 163 rtc: rtc { 164 compatible = "fsl,imx8qxp-sc-rtc"; 165 }; 166 167 watchdog { 168 compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; 169 timeout-sec = <60>; 170 }; 171 }; 172 173 timer { 174 compatible = "arm,armv8-timer"; 175 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ 176 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ 177 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ 178 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ 179 }; 180 181 xtal32k: clock-xtal32k { 182 compatible = "fixed-clock"; 183 #clock-cells = <0>; 184 clock-frequency = <32768>; 185 clock-output-names = "xtal_32KHz"; 186 }; 187 188 xtal24m: clock-xtal24m { 189 compatible = "fixed-clock"; 190 #clock-cells = <0>; 191 clock-frequency = <24000000>; 192 clock-output-names = "xtal_24MHz"; 193 }; 194 195 adma_subsys: bus@59000000 { 196 compatible = "simple-bus"; 197 #address-cells = <1>; 198 #size-cells = <1>; 199 ranges = <0x59000000 0x0 0x59000000 0x2000000>; 200 201 adma_lpcg: clock-controller@59000000 { 202 compatible = "fsl,imx8qxp-lpcg-adma"; 203 reg = <0x59000000 0x2000000>; 204 #clock-cells = <1>; 205 }; 206 207 adma_lpuart0: serial@5a060000 { 208 compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; 209 reg = <0x5a060000 0x1000>; 210 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; 211 interrupt-parent = <&gic>; 212 clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; 213 clock-names = "ipg"; 214 power-domains = <&pd IMX_SC_R_UART_0>; 215 status = "disabled"; 216 }; 217 218 adma_lpuart1: serial@5a070000 { 219 compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; 220 reg = <0x5a070000 0x1000>; 221 interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; 222 interrupt-parent = <&gic>; 223 clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; 224 clock-names = "ipg"; 225 power-domains = <&pd IMX_SC_R_UART_1>; 226 status = "disabled"; 227 }; 228 229 adma_lpuart2: serial@5a080000 { 230 compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; 231 reg = <0x5a080000 0x1000>; 232 interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; 233 interrupt-parent = <&gic>; 234 clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; 235 clock-names = "ipg"; 236 power-domains = <&pd IMX_SC_R_UART_2>; 237 status = "disabled"; 238 }; 239 240 adma_lpuart3: serial@5a090000 { 241 compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; 242 reg = <0x5a090000 0x1000>; 243 interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; 244 interrupt-parent = <&gic>; 245 clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; 246 clock-names = "ipg"; 247 power-domains = <&pd IMX_SC_R_UART_3>; 248 status = "disabled"; 249 }; 250 251 adma_i2c0: i2c@5a800000 { 252 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 253 reg = <0x5a800000 0x4000>; 254 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; 255 interrupt-parent = <&gic>; 256 clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; 257 clock-names = "per"; 258 assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; 259 assigned-clock-rates = <24000000>; 260 power-domains = <&pd IMX_SC_R_I2C_0>; 261 status = "disabled"; 262 }; 263 264 adma_i2c1: i2c@5a810000 { 265 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 266 reg = <0x5a810000 0x4000>; 267 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; 268 interrupt-parent = <&gic>; 269 clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; 270 clock-names = "per"; 271 assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; 272 assigned-clock-rates = <24000000>; 273 power-domains = <&pd IMX_SC_R_I2C_1>; 274 status = "disabled"; 275 }; 276 277 adma_i2c2: i2c@5a820000 { 278 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 279 reg = <0x5a820000 0x4000>; 280 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; 281 interrupt-parent = <&gic>; 282 clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; 283 clock-names = "per"; 284 assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; 285 assigned-clock-rates = <24000000>; 286 power-domains = <&pd IMX_SC_R_I2C_2>; 287 status = "disabled"; 288 }; 289 290 adma_i2c3: i2c@5a830000 { 291 compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; 292 reg = <0x5a830000 0x4000>; 293 interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; 294 interrupt-parent = <&gic>; 295 clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; 296 clock-names = "per"; 297 assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; 298 assigned-clock-rates = <24000000>; 299 power-domains = <&pd IMX_SC_R_I2C_3>; 300 status = "disabled"; 301 }; 302 }; 303 304 conn_subsys: bus@5b000000 { 305 compatible = "simple-bus"; 306 #address-cells = <1>; 307 #size-cells = <1>; 308 ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; 309 310 conn_lpcg: clock-controller@5b200000 { 311 compatible = "fsl,imx8qxp-lpcg-conn"; 312 reg = <0x5b200000 0xb0000>; 313 #clock-cells = <1>; 314 }; 315 316 usdhc1: mmc@5b010000 { 317 compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; 318 interrupt-parent = <&gic>; 319 interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; 320 reg = <0x5b010000 0x10000>; 321 clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, 322 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, 323 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; 324 clock-names = "ipg", "per", "ahb"; 325 assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; 326 assigned-clock-rates = <200000000>; 327 power-domains = <&pd IMX_SC_R_SDHC_0>; 328 status = "disabled"; 329 }; 330 331 usdhc2: mmc@5b020000 { 332 compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; 333 interrupt-parent = <&gic>; 334 interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; 335 reg = <0x5b020000 0x10000>; 336 clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, 337 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, 338 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; 339 clock-names = "ipg", "per", "ahb"; 340 assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; 341 assigned-clock-rates = <200000000>; 342 power-domains = <&pd IMX_SC_R_SDHC_1>; 343 fsl,tuning-start-tap = <20>; 344 fsl,tuning-step= <2>; 345 status = "disabled"; 346 }; 347 348 usdhc3: mmc@5b030000 { 349 compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; 350 interrupt-parent = <&gic>; 351 interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; 352 reg = <0x5b030000 0x10000>; 353 clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, 354 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, 355 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; 356 clock-names = "ipg", "per", "ahb"; 357 assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; 358 assigned-clock-rates = <200000000>; 359 power-domains = <&pd IMX_SC_R_SDHC_2>; 360 status = "disabled"; 361 }; 362 363 fec1: ethernet@5b040000 { 364 compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; 365 reg = <0x5b040000 0x10000>; 366 interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, 367 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, 368 <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, 369 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; 370 clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>, 371 <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>, 372 <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>, 373 <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>; 374 clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; 375 fsl,num-tx-queues=<3>; 376 fsl,num-rx-queues=<3>; 377 power-domains = <&pd IMX_SC_R_ENET_0>; 378 status = "disabled"; 379 }; 380 381 fec2: ethernet@5b050000 { 382 compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec"; 383 reg = <0x5b050000 0x10000>; 384 interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, 385 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, 386 <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, 387 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; 388 clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>, 389 <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>, 390 <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>, 391 <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>; 392 clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; 393 fsl,num-tx-queues=<3>; 394 fsl,num-rx-queues=<3>; 395 power-domains = <&pd IMX_SC_R_ENET_1>; 396 status = "disabled"; 397 }; 398 }; 399 400 ddr_subsyss: bus@5c000000 { 401 compatible = "simple-bus"; 402 #address-cells = <1>; 403 #size-cells = <1>; 404 ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; 405 406 ddr-pmu@5c020000 { 407 compatible = "fsl,imx8-ddr-pmu"; 408 reg = <0x5c020000 0x10000>; 409 interrupt-parent = <&gic>; 410 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; 411 }; 412 }; 413 414 lsio_subsys: bus@5d000000 { 415 compatible = "simple-bus"; 416 #address-cells = <1>; 417 #size-cells = <1>; 418 ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; 419 420 lsio_gpio0: gpio@5d080000 { 421 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 422 reg = <0x5d080000 0x10000>; 423 interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; 424 gpio-controller; 425 #gpio-cells = <2>; 426 interrupt-controller; 427 #interrupt-cells = <2>; 428 power-domains = <&pd IMX_SC_R_GPIO_0>; 429 }; 430 431 lsio_gpio1: gpio@5d090000 { 432 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 433 reg = <0x5d090000 0x10000>; 434 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; 435 gpio-controller; 436 #gpio-cells = <2>; 437 interrupt-controller; 438 #interrupt-cells = <2>; 439 power-domains = <&pd IMX_SC_R_GPIO_1>; 440 }; 441 442 lsio_gpio2: gpio@5d0a0000 { 443 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 444 reg = <0x5d0a0000 0x10000>; 445 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 446 gpio-controller; 447 #gpio-cells = <2>; 448 interrupt-controller; 449 #interrupt-cells = <2>; 450 power-domains = <&pd IMX_SC_R_GPIO_2>; 451 }; 452 453 lsio_gpio3: gpio@5d0b0000 { 454 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 455 reg = <0x5d0b0000 0x10000>; 456 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; 457 gpio-controller; 458 #gpio-cells = <2>; 459 interrupt-controller; 460 #interrupt-cells = <2>; 461 power-domains = <&pd IMX_SC_R_GPIO_3>; 462 }; 463 464 lsio_gpio4: gpio@5d0c0000 { 465 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 466 reg = <0x5d0c0000 0x10000>; 467 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 468 gpio-controller; 469 #gpio-cells = <2>; 470 interrupt-controller; 471 #interrupt-cells = <2>; 472 power-domains = <&pd IMX_SC_R_GPIO_4>; 473 }; 474 475 lsio_gpio5: gpio@5d0d0000 { 476 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 477 reg = <0x5d0d0000 0x10000>; 478 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; 479 gpio-controller; 480 #gpio-cells = <2>; 481 interrupt-controller; 482 #interrupt-cells = <2>; 483 power-domains = <&pd IMX_SC_R_GPIO_5>; 484 }; 485 486 lsio_gpio6: gpio@5d0e0000 { 487 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 488 reg = <0x5d0e0000 0x10000>; 489 interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; 490 gpio-controller; 491 #gpio-cells = <2>; 492 interrupt-controller; 493 #interrupt-cells = <2>; 494 power-domains = <&pd IMX_SC_R_GPIO_6>; 495 }; 496 497 lsio_gpio7: gpio@5d0f0000 { 498 compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; 499 reg = <0x5d0f0000 0x10000>; 500 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; 501 gpio-controller; 502 #gpio-cells = <2>; 503 interrupt-controller; 504 #interrupt-cells = <2>; 505 power-domains = <&pd IMX_SC_R_GPIO_7>; 506 }; 507 508 lsio_mu0: mailbox@5d1b0000 { 509 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 510 reg = <0x5d1b0000 0x10000>; 511 interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; 512 #mbox-cells = <2>; 513 status = "disabled"; 514 }; 515 516 lsio_mu1: mailbox@5d1c0000 { 517 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 518 reg = <0x5d1c0000 0x10000>; 519 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; 520 #mbox-cells = <2>; 521 }; 522 523 lsio_mu2: mailbox@5d1d0000 { 524 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 525 reg = <0x5d1d0000 0x10000>; 526 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; 527 #mbox-cells = <2>; 528 status = "disabled"; 529 }; 530 531 lsio_mu3: mailbox@5d1e0000 { 532 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 533 reg = <0x5d1e0000 0x10000>; 534 interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; 535 #mbox-cells = <2>; 536 status = "disabled"; 537 }; 538 539 lsio_mu4: mailbox@5d1f0000 { 540 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 541 reg = <0x5d1f0000 0x10000>; 542 interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; 543 #mbox-cells = <2>; 544 status = "disabled"; 545 }; 546 547 lsio_mu13: mailbox@5d280000 { 548 compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; 549 reg = <0x5d280000 0x10000>; 550 interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; 551 #mbox-cells = <2>; 552 power-domains = <&pd IMX_SC_R_MU_13A>; 553 }; 554 555 lsio_lpcg: clock-controller@5d400000 { 556 compatible = "fsl,imx8qxp-lpcg-lsio"; 557 reg = <0x5d400000 0x400000>; 558 #clock-cells = <1>; 559 }; 560 }; 561}; 562