1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2019 NXP 4 */ 5 6#include <dt-bindings/clock/imx8mm-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/thermal/thermal.h> 11 12#include "imx8mm-pinfunc.h" 13 14/ { 15 interrupt-parent = <&gic>; 16 #address-cells = <2>; 17 #size-cells = <2>; 18 19 aliases { 20 ethernet0 = &fec1; 21 gpio0 = &gpio1; 22 gpio1 = &gpio2; 23 gpio2 = &gpio3; 24 gpio3 = &gpio4; 25 gpio4 = &gpio5; 26 i2c0 = &i2c1; 27 i2c1 = &i2c2; 28 i2c2 = &i2c3; 29 i2c3 = &i2c4; 30 mmc0 = &usdhc1; 31 mmc1 = &usdhc2; 32 mmc2 = &usdhc3; 33 serial0 = &uart1; 34 serial1 = &uart2; 35 serial2 = &uart3; 36 serial3 = &uart4; 37 spi0 = &ecspi1; 38 spi1 = &ecspi2; 39 spi2 = &ecspi3; 40 }; 41 42 cpus { 43 #address-cells = <1>; 44 #size-cells = <0>; 45 46 idle-states { 47 entry-method = "psci"; 48 49 cpu_pd_wait: cpu-pd-wait { 50 compatible = "arm,idle-state"; 51 arm,psci-suspend-param = <0x0010033>; 52 local-timer-stop; 53 entry-latency-us = <1000>; 54 exit-latency-us = <700>; 55 min-residency-us = <2700>; 56 }; 57 }; 58 59 A53_0: cpu@0 { 60 device_type = "cpu"; 61 compatible = "arm,cortex-a53"; 62 reg = <0x0>; 63 clock-latency = <61036>; /* two CLK32 periods */ 64 clocks = <&clk IMX8MM_CLK_ARM>; 65 enable-method = "psci"; 66 next-level-cache = <&A53_L2>; 67 operating-points-v2 = <&a53_opp_table>; 68 nvmem-cells = <&cpu_speed_grade>; 69 nvmem-cell-names = "speed_grade"; 70 cpu-idle-states = <&cpu_pd_wait>; 71 #cooling-cells = <2>; 72 }; 73 74 A53_1: cpu@1 { 75 device_type = "cpu"; 76 compatible = "arm,cortex-a53"; 77 reg = <0x1>; 78 clock-latency = <61036>; /* two CLK32 periods */ 79 clocks = <&clk IMX8MM_CLK_ARM>; 80 enable-method = "psci"; 81 next-level-cache = <&A53_L2>; 82 operating-points-v2 = <&a53_opp_table>; 83 cpu-idle-states = <&cpu_pd_wait>; 84 #cooling-cells = <2>; 85 }; 86 87 A53_2: cpu@2 { 88 device_type = "cpu"; 89 compatible = "arm,cortex-a53"; 90 reg = <0x2>; 91 clock-latency = <61036>; /* two CLK32 periods */ 92 clocks = <&clk IMX8MM_CLK_ARM>; 93 enable-method = "psci"; 94 next-level-cache = <&A53_L2>; 95 operating-points-v2 = <&a53_opp_table>; 96 cpu-idle-states = <&cpu_pd_wait>; 97 #cooling-cells = <2>; 98 }; 99 100 A53_3: cpu@3 { 101 device_type = "cpu"; 102 compatible = "arm,cortex-a53"; 103 reg = <0x3>; 104 clock-latency = <61036>; /* two CLK32 periods */ 105 clocks = <&clk IMX8MM_CLK_ARM>; 106 enable-method = "psci"; 107 next-level-cache = <&A53_L2>; 108 operating-points-v2 = <&a53_opp_table>; 109 cpu-idle-states = <&cpu_pd_wait>; 110 #cooling-cells = <2>; 111 }; 112 113 A53_L2: l2-cache0 { 114 compatible = "cache"; 115 }; 116 }; 117 118 a53_opp_table: opp-table { 119 compatible = "operating-points-v2"; 120 opp-shared; 121 122 opp-1200000000 { 123 opp-hz = /bits/ 64 <1200000000>; 124 opp-microvolt = <850000>; 125 opp-supported-hw = <0xe>, <0x7>; 126 clock-latency-ns = <150000>; 127 opp-suspend; 128 }; 129 130 opp-1600000000 { 131 opp-hz = /bits/ 64 <1600000000>; 132 opp-microvolt = <950000>; 133 opp-supported-hw = <0xc>, <0x7>; 134 clock-latency-ns = <150000>; 135 opp-suspend; 136 }; 137 138 opp-1800000000 { 139 opp-hz = /bits/ 64 <1800000000>; 140 opp-microvolt = <1000000>; 141 opp-supported-hw = <0x8>, <0x3>; 142 clock-latency-ns = <150000>; 143 opp-suspend; 144 }; 145 }; 146 147 osc_32k: clock-osc-32k { 148 compatible = "fixed-clock"; 149 #clock-cells = <0>; 150 clock-frequency = <32768>; 151 clock-output-names = "osc_32k"; 152 }; 153 154 osc_24m: clock-osc-24m { 155 compatible = "fixed-clock"; 156 #clock-cells = <0>; 157 clock-frequency = <24000000>; 158 clock-output-names = "osc_24m"; 159 }; 160 161 clk_ext1: clock-ext1 { 162 compatible = "fixed-clock"; 163 #clock-cells = <0>; 164 clock-frequency = <133000000>; 165 clock-output-names = "clk_ext1"; 166 }; 167 168 clk_ext2: clock-ext2 { 169 compatible = "fixed-clock"; 170 #clock-cells = <0>; 171 clock-frequency = <133000000>; 172 clock-output-names = "clk_ext2"; 173 }; 174 175 clk_ext3: clock-ext3 { 176 compatible = "fixed-clock"; 177 #clock-cells = <0>; 178 clock-frequency = <133000000>; 179 clock-output-names = "clk_ext3"; 180 }; 181 182 clk_ext4: clock-ext4 { 183 compatible = "fixed-clock"; 184 #clock-cells = <0>; 185 clock-frequency= <133000000>; 186 clock-output-names = "clk_ext4"; 187 }; 188 189 psci { 190 compatible = "arm,psci-1.0"; 191 method = "smc"; 192 }; 193 194 pmu { 195 compatible = "arm,armv8-pmuv3"; 196 interrupts = <GIC_PPI 7 197 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 198 interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; 199 }; 200 201 timer { 202 compatible = "arm,armv8-timer"; 203 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ 204 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ 205 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ 206 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ 207 clock-frequency = <8000000>; 208 arm,no-tick-in-suspend; 209 }; 210 211 thermal-zones { 212 cpu-thermal { 213 polling-delay-passive = <250>; 214 polling-delay = <2000>; 215 thermal-sensors = <&tmu>; 216 trips { 217 cpu_alert0: trip0 { 218 temperature = <85000>; 219 hysteresis = <2000>; 220 type = "passive"; 221 }; 222 223 cpu_crit0: trip1 { 224 temperature = <95000>; 225 hysteresis = <2000>; 226 type = "critical"; 227 }; 228 }; 229 230 cooling-maps { 231 map0 { 232 trip = <&cpu_alert0>; 233 cooling-device = 234 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 235 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 236 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 237 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 238 }; 239 }; 240 }; 241 }; 242 243 usbphynop1: usbphynop1 { 244 compatible = "usb-nop-xceiv"; 245 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 246 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 247 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; 248 clock-names = "main_clk"; 249 }; 250 251 usbphynop2: usbphynop2 { 252 compatible = "usb-nop-xceiv"; 253 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 254 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 255 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; 256 clock-names = "main_clk"; 257 }; 258 259 soc@0 { 260 compatible = "fsl,imx8mm-soc", "simple-bus"; 261 #address-cells = <1>; 262 #size-cells = <1>; 263 ranges = <0x0 0x0 0x0 0x3e000000>; 264 nvmem-cells = <&imx8mm_uid>; 265 nvmem-cell-names = "soc_unique_id"; 266 267 aips1: bus@30000000 { 268 compatible = "fsl,aips-bus", "simple-bus"; 269 reg = <0x30000000 0x400000>; 270 #address-cells = <1>; 271 #size-cells = <1>; 272 ranges = <0x30000000 0x30000000 0x400000>; 273 274 sai1: sai@30010000 { 275 #sound-dai-cells = <0>; 276 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 277 reg = <0x30010000 0x10000>; 278 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 279 clocks = <&clk IMX8MM_CLK_SAI1_IPG>, 280 <&clk IMX8MM_CLK_SAI1_ROOT>, 281 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 282 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 283 dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; 284 dma-names = "rx", "tx"; 285 status = "disabled"; 286 }; 287 288 sai2: sai@30020000 { 289 #sound-dai-cells = <0>; 290 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 291 reg = <0x30020000 0x10000>; 292 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 293 clocks = <&clk IMX8MM_CLK_SAI2_IPG>, 294 <&clk IMX8MM_CLK_SAI2_ROOT>, 295 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 296 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 297 dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; 298 dma-names = "rx", "tx"; 299 status = "disabled"; 300 }; 301 302 sai3: sai@30030000 { 303 #sound-dai-cells = <0>; 304 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 305 reg = <0x30030000 0x10000>; 306 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 307 clocks = <&clk IMX8MM_CLK_SAI3_IPG>, 308 <&clk IMX8MM_CLK_SAI3_ROOT>, 309 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 310 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 311 dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; 312 dma-names = "rx", "tx"; 313 status = "disabled"; 314 }; 315 316 sai5: sai@30050000 { 317 #sound-dai-cells = <0>; 318 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 319 reg = <0x30050000 0x10000>; 320 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 321 clocks = <&clk IMX8MM_CLK_SAI5_IPG>, 322 <&clk IMX8MM_CLK_SAI5_ROOT>, 323 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 324 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 325 dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; 326 dma-names = "rx", "tx"; 327 status = "disabled"; 328 }; 329 330 sai6: sai@30060000 { 331 #sound-dai-cells = <0>; 332 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 333 reg = <0x30060000 0x10000>; 334 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 335 clocks = <&clk IMX8MM_CLK_SAI6_IPG>, 336 <&clk IMX8MM_CLK_SAI6_ROOT>, 337 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 338 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 339 dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; 340 dma-names = "rx", "tx"; 341 status = "disabled"; 342 }; 343 344 micfil: audio-controller@30080000 { 345 compatible = "fsl,imx8mm-micfil"; 346 reg = <0x30080000 0x10000>; 347 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 348 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 349 <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, 350 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 351 clocks = <&clk IMX8MM_CLK_PDM_IPG>, 352 <&clk IMX8MM_CLK_PDM_ROOT>, 353 <&clk IMX8MM_AUDIO_PLL1_OUT>, 354 <&clk IMX8MM_AUDIO_PLL2_OUT>, 355 <&clk IMX8MM_CLK_EXT3>; 356 clock-names = "ipg_clk", "ipg_clk_app", 357 "pll8k", "pll11k", "clkext3"; 358 dmas = <&sdma2 24 25 0x80000000>; 359 dma-names = "rx"; 360 status = "disabled"; 361 }; 362 363 spdif1: spdif@30090000 { 364 compatible = "fsl,imx35-spdif"; 365 reg = <0x30090000 0x10000>; 366 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 367 clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ 368 <&clk IMX8MM_CLK_24M>, /* rxtx0 */ 369 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ 370 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ 371 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ 372 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ 373 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ 374 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ 375 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ 376 <&clk IMX8MM_CLK_DUMMY>; /* spba */ 377 clock-names = "core", "rxtx0", 378 "rxtx1", "rxtx2", 379 "rxtx3", "rxtx4", 380 "rxtx5", "rxtx6", 381 "rxtx7", "spba"; 382 dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; 383 dma-names = "rx", "tx"; 384 status = "disabled"; 385 }; 386 387 gpio1: gpio@30200000 { 388 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 389 reg = <0x30200000 0x10000>; 390 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 391 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 392 clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; 393 gpio-controller; 394 #gpio-cells = <2>; 395 interrupt-controller; 396 #interrupt-cells = <2>; 397 gpio-ranges = <&iomuxc 0 10 30>; 398 }; 399 400 gpio2: gpio@30210000 { 401 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 402 reg = <0x30210000 0x10000>; 403 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 404 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 405 clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; 406 gpio-controller; 407 #gpio-cells = <2>; 408 interrupt-controller; 409 #interrupt-cells = <2>; 410 gpio-ranges = <&iomuxc 0 40 21>; 411 }; 412 413 gpio3: gpio@30220000 { 414 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 415 reg = <0x30220000 0x10000>; 416 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 417 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 418 clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; 419 gpio-controller; 420 #gpio-cells = <2>; 421 interrupt-controller; 422 #interrupt-cells = <2>; 423 gpio-ranges = <&iomuxc 0 61 26>; 424 }; 425 426 gpio4: gpio@30230000 { 427 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 428 reg = <0x30230000 0x10000>; 429 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 430 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 431 clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; 432 gpio-controller; 433 #gpio-cells = <2>; 434 interrupt-controller; 435 #interrupt-cells = <2>; 436 gpio-ranges = <&iomuxc 0 87 32>; 437 }; 438 439 gpio5: gpio@30240000 { 440 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 441 reg = <0x30240000 0x10000>; 442 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 443 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 444 clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; 445 gpio-controller; 446 #gpio-cells = <2>; 447 interrupt-controller; 448 #interrupt-cells = <2>; 449 gpio-ranges = <&iomuxc 0 119 30>; 450 }; 451 452 tmu: tmu@30260000 { 453 compatible = "fsl,imx8mm-tmu"; 454 reg = <0x30260000 0x10000>; 455 clocks = <&clk IMX8MM_CLK_TMU_ROOT>; 456 #thermal-sensor-cells = <0>; 457 }; 458 459 wdog1: watchdog@30280000 { 460 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 461 reg = <0x30280000 0x10000>; 462 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 463 clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; 464 status = "disabled"; 465 }; 466 467 wdog2: watchdog@30290000 { 468 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 469 reg = <0x30290000 0x10000>; 470 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 471 clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; 472 status = "disabled"; 473 }; 474 475 wdog3: watchdog@302a0000 { 476 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 477 reg = <0x302a0000 0x10000>; 478 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 479 clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; 480 status = "disabled"; 481 }; 482 483 sdma2: dma-controller@302c0000 { 484 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 485 reg = <0x302c0000 0x10000>; 486 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 487 clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, 488 <&clk IMX8MM_CLK_SDMA2_ROOT>; 489 clock-names = "ipg", "ahb"; 490 #dma-cells = <3>; 491 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 492 }; 493 494 sdma3: dma-controller@302b0000 { 495 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 496 reg = <0x302b0000 0x10000>; 497 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 498 clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, 499 <&clk IMX8MM_CLK_SDMA3_ROOT>; 500 clock-names = "ipg", "ahb"; 501 #dma-cells = <3>; 502 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 503 }; 504 505 iomuxc: pinctrl@30330000 { 506 compatible = "fsl,imx8mm-iomuxc"; 507 reg = <0x30330000 0x10000>; 508 }; 509 510 gpr: iomuxc-gpr@30340000 { 511 compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; 512 reg = <0x30340000 0x10000>; 513 }; 514 515 ocotp: efuse@30350000 { 516 compatible = "fsl,imx8mm-ocotp", "syscon"; 517 reg = <0x30350000 0x10000>; 518 clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; 519 /* For nvmem subnodes */ 520 #address-cells = <1>; 521 #size-cells = <1>; 522 523 imx8mm_uid: unique-id@410 { 524 reg = <0x4 0x8>; 525 }; 526 527 cpu_speed_grade: speed-grade@10 { 528 reg = <0x10 4>; 529 }; 530 531 fec_mac_address: mac-address@90 { 532 reg = <0x90 6>; 533 }; 534 }; 535 536 anatop: anatop@30360000 { 537 compatible = "fsl,imx8mm-anatop", "syscon"; 538 reg = <0x30360000 0x10000>; 539 }; 540 541 snvs: snvs@30370000 { 542 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; 543 reg = <0x30370000 0x10000>; 544 545 snvs_rtc: snvs-rtc-lp { 546 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 547 regmap = <&snvs>; 548 offset = <0x34>; 549 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 550 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 551 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; 552 clock-names = "snvs-rtc"; 553 }; 554 555 snvs_pwrkey: snvs-powerkey { 556 compatible = "fsl,sec-v4.0-pwrkey"; 557 regmap = <&snvs>; 558 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 559 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; 560 clock-names = "snvs-pwrkey"; 561 linux,keycode = <KEY_POWER>; 562 wakeup-source; 563 status = "disabled"; 564 }; 565 }; 566 567 clk: clock-controller@30380000 { 568 compatible = "fsl,imx8mm-ccm"; 569 reg = <0x30380000 0x10000>; 570 #clock-cells = <1>; 571 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, 572 <&clk_ext3>, <&clk_ext4>; 573 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", 574 "clk_ext3", "clk_ext4"; 575 assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>, 576 <&clk IMX8MM_CLK_A53_CORE>, 577 <&clk IMX8MM_CLK_NOC>, 578 <&clk IMX8MM_CLK_AUDIO_AHB>, 579 <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, 580 <&clk IMX8MM_SYS_PLL3>, 581 <&clk IMX8MM_VIDEO_PLL1>, 582 <&clk IMX8MM_AUDIO_PLL1>, 583 <&clk IMX8MM_AUDIO_PLL2>; 584 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, 585 <&clk IMX8MM_ARM_PLL_OUT>, 586 <&clk IMX8MM_SYS_PLL3_OUT>, 587 <&clk IMX8MM_SYS_PLL1_800M>; 588 assigned-clock-rates = <0>, <0>, <0>, 589 <400000000>, 590 <400000000>, 591 <750000000>, 592 <594000000>, 593 <393216000>, 594 <361267200>; 595 }; 596 597 src: reset-controller@30390000 { 598 compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; 599 reg = <0x30390000 0x10000>; 600 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 601 #reset-cells = <1>; 602 }; 603 }; 604 605 aips2: bus@30400000 { 606 compatible = "fsl,aips-bus", "simple-bus"; 607 reg = <0x30400000 0x400000>; 608 #address-cells = <1>; 609 #size-cells = <1>; 610 ranges = <0x30400000 0x30400000 0x400000>; 611 612 pwm1: pwm@30660000 { 613 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 614 reg = <0x30660000 0x10000>; 615 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 616 clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, 617 <&clk IMX8MM_CLK_PWM1_ROOT>; 618 clock-names = "ipg", "per"; 619 #pwm-cells = <2>; 620 status = "disabled"; 621 }; 622 623 pwm2: pwm@30670000 { 624 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 625 reg = <0x30670000 0x10000>; 626 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 627 clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, 628 <&clk IMX8MM_CLK_PWM2_ROOT>; 629 clock-names = "ipg", "per"; 630 #pwm-cells = <2>; 631 status = "disabled"; 632 }; 633 634 pwm3: pwm@30680000 { 635 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 636 reg = <0x30680000 0x10000>; 637 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 638 clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, 639 <&clk IMX8MM_CLK_PWM3_ROOT>; 640 clock-names = "ipg", "per"; 641 #pwm-cells = <2>; 642 status = "disabled"; 643 }; 644 645 pwm4: pwm@30690000 { 646 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 647 reg = <0x30690000 0x10000>; 648 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 649 clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, 650 <&clk IMX8MM_CLK_PWM4_ROOT>; 651 clock-names = "ipg", "per"; 652 #pwm-cells = <2>; 653 status = "disabled"; 654 }; 655 656 system_counter: timer@306a0000 { 657 compatible = "nxp,sysctr-timer"; 658 reg = <0x306a0000 0x20000>; 659 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 660 clocks = <&osc_24m>; 661 clock-names = "per"; 662 }; 663 }; 664 665 aips3: bus@30800000 { 666 compatible = "fsl,aips-bus", "simple-bus"; 667 reg = <0x30800000 0x400000>; 668 #address-cells = <1>; 669 #size-cells = <1>; 670 ranges = <0x30800000 0x30800000 0x400000>, 671 <0x8000000 0x8000000 0x10000000>; 672 673 ecspi1: spi@30820000 { 674 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 675 #address-cells = <1>; 676 #size-cells = <0>; 677 reg = <0x30820000 0x10000>; 678 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 679 clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, 680 <&clk IMX8MM_CLK_ECSPI1_ROOT>; 681 clock-names = "ipg", "per"; 682 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; 683 dma-names = "rx", "tx"; 684 status = "disabled"; 685 }; 686 687 ecspi2: spi@30830000 { 688 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 689 #address-cells = <1>; 690 #size-cells = <0>; 691 reg = <0x30830000 0x10000>; 692 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 693 clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, 694 <&clk IMX8MM_CLK_ECSPI2_ROOT>; 695 clock-names = "ipg", "per"; 696 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; 697 dma-names = "rx", "tx"; 698 status = "disabled"; 699 }; 700 701 ecspi3: spi@30840000 { 702 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 703 #address-cells = <1>; 704 #size-cells = <0>; 705 reg = <0x30840000 0x10000>; 706 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 707 clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, 708 <&clk IMX8MM_CLK_ECSPI3_ROOT>; 709 clock-names = "ipg", "per"; 710 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; 711 dma-names = "rx", "tx"; 712 status = "disabled"; 713 }; 714 715 uart1: serial@30860000 { 716 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 717 reg = <0x30860000 0x10000>; 718 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 719 clocks = <&clk IMX8MM_CLK_UART1_ROOT>, 720 <&clk IMX8MM_CLK_UART1_ROOT>; 721 clock-names = "ipg", "per"; 722 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; 723 dma-names = "rx", "tx"; 724 status = "disabled"; 725 }; 726 727 uart3: serial@30880000 { 728 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 729 reg = <0x30880000 0x10000>; 730 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 731 clocks = <&clk IMX8MM_CLK_UART3_ROOT>, 732 <&clk IMX8MM_CLK_UART3_ROOT>; 733 clock-names = "ipg", "per"; 734 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; 735 dma-names = "rx", "tx"; 736 status = "disabled"; 737 }; 738 739 uart2: serial@30890000 { 740 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 741 reg = <0x30890000 0x10000>; 742 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 743 clocks = <&clk IMX8MM_CLK_UART2_ROOT>, 744 <&clk IMX8MM_CLK_UART2_ROOT>; 745 clock-names = "ipg", "per"; 746 status = "disabled"; 747 }; 748 749 crypto: crypto@30900000 { 750 compatible = "fsl,sec-v4.0"; 751 #address-cells = <1>; 752 #size-cells = <1>; 753 reg = <0x30900000 0x40000>; 754 ranges = <0 0x30900000 0x40000>; 755 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 756 clocks = <&clk IMX8MM_CLK_AHB>, 757 <&clk IMX8MM_CLK_IPG_ROOT>; 758 clock-names = "aclk", "ipg"; 759 760 sec_jr0: jr@1000 { 761 compatible = "fsl,sec-v4.0-job-ring"; 762 reg = <0x1000 0x1000>; 763 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 764 }; 765 766 sec_jr1: jr@2000 { 767 compatible = "fsl,sec-v4.0-job-ring"; 768 reg = <0x2000 0x1000>; 769 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 770 }; 771 772 sec_jr2: jr@3000 { 773 compatible = "fsl,sec-v4.0-job-ring"; 774 reg = <0x3000 0x1000>; 775 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 776 }; 777 }; 778 779 i2c1: i2c@30a20000 { 780 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 781 #address-cells = <1>; 782 #size-cells = <0>; 783 reg = <0x30a20000 0x10000>; 784 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 785 clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; 786 status = "disabled"; 787 }; 788 789 i2c2: i2c@30a30000 { 790 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 791 #address-cells = <1>; 792 #size-cells = <0>; 793 reg = <0x30a30000 0x10000>; 794 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 795 clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; 796 status = "disabled"; 797 }; 798 799 i2c3: i2c@30a40000 { 800 #address-cells = <1>; 801 #size-cells = <0>; 802 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 803 reg = <0x30a40000 0x10000>; 804 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 805 clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; 806 status = "disabled"; 807 }; 808 809 i2c4: i2c@30a50000 { 810 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 811 #address-cells = <1>; 812 #size-cells = <0>; 813 reg = <0x30a50000 0x10000>; 814 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 815 clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; 816 status = "disabled"; 817 }; 818 819 uart4: serial@30a60000 { 820 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 821 reg = <0x30a60000 0x10000>; 822 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 823 clocks = <&clk IMX8MM_CLK_UART4_ROOT>, 824 <&clk IMX8MM_CLK_UART4_ROOT>; 825 clock-names = "ipg", "per"; 826 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; 827 dma-names = "rx", "tx"; 828 status = "disabled"; 829 }; 830 831 mu: mailbox@30aa0000 { 832 compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; 833 reg = <0x30aa0000 0x10000>; 834 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 835 clocks = <&clk IMX8MM_CLK_MU_ROOT>; 836 #mbox-cells = <2>; 837 }; 838 839 usdhc1: mmc@30b40000 { 840 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 841 reg = <0x30b40000 0x10000>; 842 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 843 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 844 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 845 <&clk IMX8MM_CLK_USDHC1_ROOT>; 846 clock-names = "ipg", "ahb", "per"; 847 fsl,tuning-start-tap = <20>; 848 fsl,tuning-step= <2>; 849 bus-width = <4>; 850 status = "disabled"; 851 }; 852 853 usdhc2: mmc@30b50000 { 854 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 855 reg = <0x30b50000 0x10000>; 856 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 857 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 858 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 859 <&clk IMX8MM_CLK_USDHC2_ROOT>; 860 clock-names = "ipg", "ahb", "per"; 861 fsl,tuning-start-tap = <20>; 862 fsl,tuning-step= <2>; 863 bus-width = <4>; 864 status = "disabled"; 865 }; 866 867 usdhc3: mmc@30b60000 { 868 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 869 reg = <0x30b60000 0x10000>; 870 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 871 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 872 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 873 <&clk IMX8MM_CLK_USDHC3_ROOT>; 874 clock-names = "ipg", "ahb", "per"; 875 fsl,tuning-start-tap = <20>; 876 fsl,tuning-step= <2>; 877 bus-width = <4>; 878 status = "disabled"; 879 }; 880 881 flexspi: spi@30bb0000 { 882 #address-cells = <1>; 883 #size-cells = <0>; 884 compatible = "nxp,imx8mm-fspi"; 885 reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; 886 reg-names = "fspi_base", "fspi_mmap"; 887 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 888 clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, 889 <&clk IMX8MM_CLK_QSPI_ROOT>; 890 clock-names = "fspi", "fspi_en"; 891 status = "disabled"; 892 }; 893 894 sdma1: dma-controller@30bd0000 { 895 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 896 reg = <0x30bd0000 0x10000>; 897 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 898 clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, 899 <&clk IMX8MM_CLK_AHB>; 900 clock-names = "ipg", "ahb"; 901 #dma-cells = <3>; 902 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 903 }; 904 905 fec1: ethernet@30be0000 { 906 compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec"; 907 reg = <0x30be0000 0x10000>; 908 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 909 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 910 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 911 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 912 clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, 913 <&clk IMX8MM_CLK_ENET1_ROOT>, 914 <&clk IMX8MM_CLK_ENET_TIMER>, 915 <&clk IMX8MM_CLK_ENET_REF>, 916 <&clk IMX8MM_CLK_ENET_PHY_REF>; 917 clock-names = "ipg", "ahb", "ptp", 918 "enet_clk_ref", "enet_out"; 919 assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, 920 <&clk IMX8MM_CLK_ENET_TIMER>, 921 <&clk IMX8MM_CLK_ENET_REF>, 922 <&clk IMX8MM_CLK_ENET_PHY_REF>; 923 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, 924 <&clk IMX8MM_SYS_PLL2_100M>, 925 <&clk IMX8MM_SYS_PLL2_125M>, 926 <&clk IMX8MM_SYS_PLL2_50M>; 927 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; 928 fsl,num-tx-queues = <3>; 929 fsl,num-rx-queues = <3>; 930 nvmem-cells = <&fec_mac_address>; 931 nvmem-cell-names = "mac-address"; 932 nvmem_macaddr_swap; 933 fsl,stop-mode = <&gpr 0x10 3>; 934 status = "disabled"; 935 }; 936 937 }; 938 939 aips4: bus@32c00000 { 940 compatible = "fsl,aips-bus", "simple-bus"; 941 reg = <0x32c00000 0x400000>; 942 #address-cells = <1>; 943 #size-cells = <1>; 944 ranges = <0x32c00000 0x32c00000 0x400000>; 945 946 usbotg1: usb@32e40000 { 947 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; 948 reg = <0x32e40000 0x200>; 949 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 950 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; 951 clock-names = "usb1_ctrl_root_clk"; 952 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; 953 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; 954 fsl,usbphy = <&usbphynop1>; 955 fsl,usbmisc = <&usbmisc1 0>; 956 status = "disabled"; 957 }; 958 959 usbmisc1: usbmisc@32e40200 { 960 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; 961 #index-cells = <1>; 962 reg = <0x32e40200 0x200>; 963 }; 964 965 usbotg2: usb@32e50000 { 966 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; 967 reg = <0x32e50000 0x200>; 968 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 969 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; 970 clock-names = "usb1_ctrl_root_clk"; 971 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; 972 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; 973 fsl,usbphy = <&usbphynop2>; 974 fsl,usbmisc = <&usbmisc2 0>; 975 status = "disabled"; 976 }; 977 978 usbmisc2: usbmisc@32e50200 { 979 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; 980 #index-cells = <1>; 981 reg = <0x32e50200 0x200>; 982 }; 983 984 }; 985 986 dma_apbh: dma-controller@33000000 { 987 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; 988 reg = <0x33000000 0x2000>; 989 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 990 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 991 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 992 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 993 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; 994 #dma-cells = <1>; 995 dma-channels = <4>; 996 clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 997 }; 998 999 gpmi: nand-controller@33002000{ 1000 compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; 1001 #address-cells = <1>; 1002 #size-cells = <1>; 1003 reg = <0x33002000 0x2000>, <0x33004000 0x4000>; 1004 reg-names = "gpmi-nand", "bch"; 1005 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1006 interrupt-names = "bch"; 1007 clocks = <&clk IMX8MM_CLK_NAND_ROOT>, 1008 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 1009 clock-names = "gpmi_io", "gpmi_bch_apb"; 1010 dmas = <&dma_apbh 0>; 1011 dma-names = "rx-tx"; 1012 status = "disabled"; 1013 }; 1014 1015 gic: interrupt-controller@38800000 { 1016 compatible = "arm,gic-v3"; 1017 reg = <0x38800000 0x10000>, /* GIC Dist */ 1018 <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ 1019 #interrupt-cells = <3>; 1020 interrupt-controller; 1021 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 1022 }; 1023 1024 ddrc: memory-controller@3d400000 { 1025 compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; 1026 reg = <0x3d400000 0x400000>; 1027 clock-names = "core", "pll", "alt", "apb"; 1028 clocks = <&clk IMX8MM_CLK_DRAM_CORE>, 1029 <&clk IMX8MM_DRAM_PLL>, 1030 <&clk IMX8MM_CLK_DRAM_ALT>, 1031 <&clk IMX8MM_CLK_DRAM_APB>; 1032 }; 1033 1034 ddr-pmu@3d800000 { 1035 compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; 1036 reg = <0x3d800000 0x400000>; 1037 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1038 }; 1039 }; 1040}; 1041