1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mm-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/power/imx8mm-power.h>
11#include <dt-bindings/reset/imx8mq-reset.h>
12#include <dt-bindings/thermal/thermal.h>
13
14#include "imx8mm-pinfunc.h"
15
16/ {
17	interrupt-parent = <&gic>;
18	#address-cells = <2>;
19	#size-cells = <2>;
20
21	aliases {
22		ethernet0 = &fec1;
23		gpio0 = &gpio1;
24		gpio1 = &gpio2;
25		gpio2 = &gpio3;
26		gpio3 = &gpio4;
27		gpio4 = &gpio5;
28		i2c0 = &i2c1;
29		i2c1 = &i2c2;
30		i2c2 = &i2c3;
31		i2c3 = &i2c4;
32		mmc0 = &usdhc1;
33		mmc1 = &usdhc2;
34		mmc2 = &usdhc3;
35		serial0 = &uart1;
36		serial1 = &uart2;
37		serial2 = &uart3;
38		serial3 = &uart4;
39		spi0 = &ecspi1;
40		spi1 = &ecspi2;
41		spi2 = &ecspi3;
42	};
43
44	cpus {
45		#address-cells = <1>;
46		#size-cells = <0>;
47
48		idle-states {
49			entry-method = "psci";
50
51			cpu_pd_wait: cpu-pd-wait {
52				compatible = "arm,idle-state";
53				arm,psci-suspend-param = <0x0010033>;
54				local-timer-stop;
55				entry-latency-us = <1000>;
56				exit-latency-us = <700>;
57				min-residency-us = <2700>;
58			};
59		};
60
61		A53_0: cpu@0 {
62			device_type = "cpu";
63			compatible = "arm,cortex-a53";
64			reg = <0x0>;
65			clock-latency = <61036>; /* two CLK32 periods */
66			clocks = <&clk IMX8MM_CLK_ARM>;
67			enable-method = "psci";
68			i-cache-size = <0x8000>;
69			i-cache-line-size = <64>;
70			i-cache-sets = <256>;
71			d-cache-size = <0x8000>;
72			d-cache-line-size = <64>;
73			d-cache-sets = <128>;
74			next-level-cache = <&A53_L2>;
75			operating-points-v2 = <&a53_opp_table>;
76			nvmem-cells = <&cpu_speed_grade>;
77			nvmem-cell-names = "speed_grade";
78			cpu-idle-states = <&cpu_pd_wait>;
79			#cooling-cells = <2>;
80		};
81
82		A53_1: cpu@1 {
83			device_type = "cpu";
84			compatible = "arm,cortex-a53";
85			reg = <0x1>;
86			clock-latency = <61036>; /* two CLK32 periods */
87			clocks = <&clk IMX8MM_CLK_ARM>;
88			enable-method = "psci";
89			i-cache-size = <0x8000>;
90			i-cache-line-size = <64>;
91			i-cache-sets = <256>;
92			d-cache-size = <0x8000>;
93			d-cache-line-size = <64>;
94			d-cache-sets = <128>;
95			next-level-cache = <&A53_L2>;
96			operating-points-v2 = <&a53_opp_table>;
97			cpu-idle-states = <&cpu_pd_wait>;
98			#cooling-cells = <2>;
99		};
100
101		A53_2: cpu@2 {
102			device_type = "cpu";
103			compatible = "arm,cortex-a53";
104			reg = <0x2>;
105			clock-latency = <61036>; /* two CLK32 periods */
106			clocks = <&clk IMX8MM_CLK_ARM>;
107			enable-method = "psci";
108			i-cache-size = <0x8000>;
109			i-cache-line-size = <64>;
110			i-cache-sets = <256>;
111			d-cache-size = <0x8000>;
112			d-cache-line-size = <64>;
113			d-cache-sets = <128>;
114			next-level-cache = <&A53_L2>;
115			operating-points-v2 = <&a53_opp_table>;
116			cpu-idle-states = <&cpu_pd_wait>;
117			#cooling-cells = <2>;
118		};
119
120		A53_3: cpu@3 {
121			device_type = "cpu";
122			compatible = "arm,cortex-a53";
123			reg = <0x3>;
124			clock-latency = <61036>; /* two CLK32 periods */
125			clocks = <&clk IMX8MM_CLK_ARM>;
126			enable-method = "psci";
127			i-cache-size = <0x8000>;
128			i-cache-line-size = <64>;
129			i-cache-sets = <256>;
130			d-cache-size = <0x8000>;
131			d-cache-line-size = <64>;
132			d-cache-sets = <128>;
133			next-level-cache = <&A53_L2>;
134			operating-points-v2 = <&a53_opp_table>;
135			cpu-idle-states = <&cpu_pd_wait>;
136			#cooling-cells = <2>;
137		};
138
139		A53_L2: l2-cache0 {
140			compatible = "cache";
141			cache-level = <2>;
142			cache-size = <0x80000>;
143			cache-line-size = <64>;
144			cache-sets = <512>;
145		};
146	};
147
148	a53_opp_table: opp-table {
149		compatible = "operating-points-v2";
150		opp-shared;
151
152		opp-1200000000 {
153			opp-hz = /bits/ 64 <1200000000>;
154			opp-microvolt = <850000>;
155			opp-supported-hw = <0xe>, <0x7>;
156			clock-latency-ns = <150000>;
157			opp-suspend;
158		};
159
160		opp-1600000000 {
161			opp-hz = /bits/ 64 <1600000000>;
162			opp-microvolt = <950000>;
163			opp-supported-hw = <0xc>, <0x7>;
164			clock-latency-ns = <150000>;
165			opp-suspend;
166		};
167
168		opp-1800000000 {
169			opp-hz = /bits/ 64 <1800000000>;
170			opp-microvolt = <1000000>;
171			opp-supported-hw = <0x8>, <0x3>;
172			clock-latency-ns = <150000>;
173			opp-suspend;
174		};
175	};
176
177	osc_32k: clock-osc-32k {
178		compatible = "fixed-clock";
179		#clock-cells = <0>;
180		clock-frequency = <32768>;
181		clock-output-names = "osc_32k";
182	};
183
184	osc_24m: clock-osc-24m {
185		compatible = "fixed-clock";
186		#clock-cells = <0>;
187		clock-frequency = <24000000>;
188		clock-output-names = "osc_24m";
189	};
190
191	clk_ext1: clock-ext1 {
192		compatible = "fixed-clock";
193		#clock-cells = <0>;
194		clock-frequency = <133000000>;
195		clock-output-names = "clk_ext1";
196	};
197
198	clk_ext2: clock-ext2 {
199		compatible = "fixed-clock";
200		#clock-cells = <0>;
201		clock-frequency = <133000000>;
202		clock-output-names = "clk_ext2";
203	};
204
205	clk_ext3: clock-ext3 {
206		compatible = "fixed-clock";
207		#clock-cells = <0>;
208		clock-frequency = <133000000>;
209		clock-output-names = "clk_ext3";
210	};
211
212	clk_ext4: clock-ext4 {
213		compatible = "fixed-clock";
214		#clock-cells = <0>;
215		clock-frequency = <133000000>;
216		clock-output-names = "clk_ext4";
217	};
218
219	psci {
220		compatible = "arm,psci-1.0";
221		method = "smc";
222	};
223
224	pmu {
225		compatible = "arm,cortex-a53-pmu";
226		interrupts = <GIC_PPI 7
227			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
228	};
229
230	timer {
231		compatible = "arm,armv8-timer";
232		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
233			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
234			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
235			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
236		clock-frequency = <8000000>;
237		arm,no-tick-in-suspend;
238	};
239
240	thermal-zones {
241		cpu-thermal {
242			polling-delay-passive = <250>;
243			polling-delay = <2000>;
244			thermal-sensors = <&tmu>;
245			trips {
246				cpu_alert0: trip0 {
247					temperature = <85000>;
248					hysteresis = <2000>;
249					type = "passive";
250				};
251
252				cpu_crit0: trip1 {
253					temperature = <95000>;
254					hysteresis = <2000>;
255					type = "critical";
256				};
257			};
258
259			cooling-maps {
260				map0 {
261					trip = <&cpu_alert0>;
262					cooling-device =
263						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
264						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
265						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
266						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
267				};
268			};
269		};
270	};
271
272	usbphynop1: usbphynop1 {
273		#phy-cells = <0>;
274		compatible = "usb-nop-xceiv";
275		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
276		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
277		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
278		clock-names = "main_clk";
279		power-domains = <&pgc_otg1>;
280	};
281
282	usbphynop2: usbphynop2 {
283		#phy-cells = <0>;
284		compatible = "usb-nop-xceiv";
285		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
286		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
287		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
288		clock-names = "main_clk";
289		power-domains = <&pgc_otg2>;
290	};
291
292	soc: soc@0 {
293		compatible = "fsl,imx8mm-soc", "simple-bus";
294		#address-cells = <1>;
295		#size-cells = <1>;
296		ranges = <0x0 0x0 0x0 0x3e000000>;
297		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
298		nvmem-cells = <&imx8mm_uid>;
299		nvmem-cell-names = "soc_unique_id";
300
301		aips1: bus@30000000 {
302			compatible = "fsl,aips-bus", "simple-bus";
303			reg = <0x30000000 0x400000>;
304			#address-cells = <1>;
305			#size-cells = <1>;
306			ranges = <0x30000000 0x30000000 0x400000>;
307
308			spba2: spba-bus@30000000 {
309				compatible = "fsl,spba-bus", "simple-bus";
310				#address-cells = <1>;
311				#size-cells = <1>;
312				reg = <0x30000000 0x100000>;
313				ranges;
314
315				sai1: sai@30010000 {
316					#sound-dai-cells = <0>;
317					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
318					reg = <0x30010000 0x10000>;
319					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
320					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
321						 <&clk IMX8MM_CLK_SAI1_ROOT>,
322						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
323					clock-names = "bus", "mclk1", "mclk2", "mclk3";
324					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
325					dma-names = "rx", "tx";
326					status = "disabled";
327				};
328
329				sai2: sai@30020000 {
330					#sound-dai-cells = <0>;
331					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
332					reg = <0x30020000 0x10000>;
333					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
334					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
335						<&clk IMX8MM_CLK_SAI2_ROOT>,
336						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
337					clock-names = "bus", "mclk1", "mclk2", "mclk3";
338					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
339					dma-names = "rx", "tx";
340					status = "disabled";
341				};
342
343				sai3: sai@30030000 {
344					#sound-dai-cells = <0>;
345					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
346					reg = <0x30030000 0x10000>;
347					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
348					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
349						 <&clk IMX8MM_CLK_SAI3_ROOT>,
350						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
351					clock-names = "bus", "mclk1", "mclk2", "mclk3";
352					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
353					dma-names = "rx", "tx";
354					status = "disabled";
355				};
356
357				sai5: sai@30050000 {
358					#sound-dai-cells = <0>;
359					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
360					reg = <0x30050000 0x10000>;
361					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
362					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
363						 <&clk IMX8MM_CLK_SAI5_ROOT>,
364						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
365					clock-names = "bus", "mclk1", "mclk2", "mclk3";
366					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
367					dma-names = "rx", "tx";
368					status = "disabled";
369				};
370
371				sai6: sai@30060000 {
372					#sound-dai-cells = <0>;
373					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
374					reg = <0x30060000 0x10000>;
375					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
376					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
377						 <&clk IMX8MM_CLK_SAI6_ROOT>,
378						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
379					clock-names = "bus", "mclk1", "mclk2", "mclk3";
380					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
381					dma-names = "rx", "tx";
382					status = "disabled";
383				};
384
385				micfil: audio-controller@30080000 {
386					compatible = "fsl,imx8mm-micfil";
387					reg = <0x30080000 0x10000>;
388					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
389						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
390						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
391						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
392					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
393						 <&clk IMX8MM_CLK_PDM_ROOT>,
394						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
395						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
396						 <&clk IMX8MM_CLK_EXT3>;
397					clock-names = "ipg_clk", "ipg_clk_app",
398						      "pll8k", "pll11k", "clkext3";
399					dmas = <&sdma2 24 25 0x80000000>;
400					dma-names = "rx";
401					status = "disabled";
402				};
403
404				spdif1: spdif@30090000 {
405					compatible = "fsl,imx35-spdif";
406					reg = <0x30090000 0x10000>;
407					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
408					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
409						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
410						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
411						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
412						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
413						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
414						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
415						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
416						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
417						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
418					clock-names = "core", "rxtx0",
419						      "rxtx1", "rxtx2",
420						      "rxtx3", "rxtx4",
421						      "rxtx5", "rxtx6",
422						      "rxtx7", "spba";
423					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
424					dma-names = "rx", "tx";
425					status = "disabled";
426				};
427			};
428
429			gpio1: gpio@30200000 {
430				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
431				reg = <0x30200000 0x10000>;
432				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
433					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
434				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
435				gpio-controller;
436				#gpio-cells = <2>;
437				interrupt-controller;
438				#interrupt-cells = <2>;
439				gpio-ranges = <&iomuxc 0 10 30>;
440			};
441
442			gpio2: gpio@30210000 {
443				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
444				reg = <0x30210000 0x10000>;
445				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
446					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
447				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
448				gpio-controller;
449				#gpio-cells = <2>;
450				interrupt-controller;
451				#interrupt-cells = <2>;
452				gpio-ranges = <&iomuxc 0 40 21>;
453			};
454
455			gpio3: gpio@30220000 {
456				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
457				reg = <0x30220000 0x10000>;
458				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
459					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
460				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
461				gpio-controller;
462				#gpio-cells = <2>;
463				interrupt-controller;
464				#interrupt-cells = <2>;
465				gpio-ranges = <&iomuxc 0 61 26>;
466			};
467
468			gpio4: gpio@30230000 {
469				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
470				reg = <0x30230000 0x10000>;
471				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
472					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
473				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
474				gpio-controller;
475				#gpio-cells = <2>;
476				interrupt-controller;
477				#interrupt-cells = <2>;
478				gpio-ranges = <&iomuxc 0 87 32>;
479			};
480
481			gpio5: gpio@30240000 {
482				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
483				reg = <0x30240000 0x10000>;
484				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
485					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
486				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
487				gpio-controller;
488				#gpio-cells = <2>;
489				interrupt-controller;
490				#interrupt-cells = <2>;
491				gpio-ranges = <&iomuxc 0 119 30>;
492			};
493
494			tmu: tmu@30260000 {
495				compatible = "fsl,imx8mm-tmu";
496				reg = <0x30260000 0x10000>;
497				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
498				#thermal-sensor-cells = <0>;
499			};
500
501			wdog1: watchdog@30280000 {
502				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
503				reg = <0x30280000 0x10000>;
504				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
505				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
506				status = "disabled";
507			};
508
509			wdog2: watchdog@30290000 {
510				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
511				reg = <0x30290000 0x10000>;
512				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
513				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
514				status = "disabled";
515			};
516
517			wdog3: watchdog@302a0000 {
518				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
519				reg = <0x302a0000 0x10000>;
520				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
521				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
522				status = "disabled";
523			};
524
525			sdma2: dma-controller@302c0000 {
526				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
527				reg = <0x302c0000 0x10000>;
528				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
529				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
530					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
531				clock-names = "ipg", "ahb";
532				#dma-cells = <3>;
533				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
534			};
535
536			sdma3: dma-controller@302b0000 {
537				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
538				reg = <0x302b0000 0x10000>;
539				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
540				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
541				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
542				clock-names = "ipg", "ahb";
543				#dma-cells = <3>;
544				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
545			};
546
547			iomuxc: pinctrl@30330000 {
548				compatible = "fsl,imx8mm-iomuxc";
549				reg = <0x30330000 0x10000>;
550			};
551
552			gpr: iomuxc-gpr@30340000 {
553				compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
554				reg = <0x30340000 0x10000>;
555			};
556
557			ocotp: efuse@30350000 {
558				compatible = "fsl,imx8mm-ocotp", "syscon";
559				reg = <0x30350000 0x10000>;
560				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
561				/* For nvmem subnodes */
562				#address-cells = <1>;
563				#size-cells = <1>;
564
565				imx8mm_uid: unique-id@410 {
566					reg = <0x4 0x8>;
567				};
568
569				cpu_speed_grade: speed-grade@10 {
570					reg = <0x10 4>;
571				};
572
573				fec_mac_address: mac-address@90 {
574					reg = <0x90 6>;
575				};
576			};
577
578			anatop: anatop@30360000 {
579				compatible = "fsl,imx8mm-anatop", "syscon";
580				reg = <0x30360000 0x10000>;
581			};
582
583			snvs: snvs@30370000 {
584				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
585				reg = <0x30370000 0x10000>;
586
587				snvs_rtc: snvs-rtc-lp {
588					compatible = "fsl,sec-v4.0-mon-rtc-lp";
589					regmap = <&snvs>;
590					offset = <0x34>;
591					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
592						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
593					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
594					clock-names = "snvs-rtc";
595				};
596
597				snvs_pwrkey: snvs-powerkey {
598					compatible = "fsl,sec-v4.0-pwrkey";
599					regmap = <&snvs>;
600					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
601					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
602					clock-names = "snvs-pwrkey";
603					linux,keycode = <KEY_POWER>;
604					wakeup-source;
605					status = "disabled";
606				};
607
608				snvs_lpgpr: snvs-lpgpr {
609					compatible = "fsl,imx8mm-snvs-lpgpr",
610						     "fsl,imx7d-snvs-lpgpr";
611				};
612			};
613
614			clk: clock-controller@30380000 {
615				compatible = "fsl,imx8mm-ccm";
616				reg = <0x30380000 0x10000>;
617				#clock-cells = <1>;
618				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
619					 <&clk_ext3>, <&clk_ext4>;
620				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
621					      "clk_ext3", "clk_ext4";
622				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
623						<&clk IMX8MM_CLK_A53_CORE>,
624						<&clk IMX8MM_CLK_NOC>,
625						<&clk IMX8MM_CLK_AUDIO_AHB>,
626						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
627						<&clk IMX8MM_SYS_PLL3>,
628						<&clk IMX8MM_VIDEO_PLL1>,
629						<&clk IMX8MM_AUDIO_PLL1>;
630				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
631							 <&clk IMX8MM_ARM_PLL_OUT>,
632							 <&clk IMX8MM_SYS_PLL3_OUT>,
633							 <&clk IMX8MM_SYS_PLL1_800M>;
634				assigned-clock-rates = <0>, <0>, <0>,
635							<400000000>,
636							<400000000>,
637							<750000000>,
638							<594000000>,
639							<393216000>;
640			};
641
642			src: reset-controller@30390000 {
643				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
644				reg = <0x30390000 0x10000>;
645				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
646				#reset-cells = <1>;
647			};
648
649			gpc: gpc@303a0000 {
650				compatible = "fsl,imx8mm-gpc";
651				reg = <0x303a0000 0x10000>;
652				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
653				interrupt-parent = <&gic>;
654				interrupt-controller;
655				#interrupt-cells = <3>;
656
657				pgc {
658					#address-cells = <1>;
659					#size-cells = <0>;
660
661					pgc_hsiomix: power-domain@0 {
662						#power-domain-cells = <0>;
663						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
664						clocks = <&clk IMX8MM_CLK_USB_BUS>;
665						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
666						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
667					};
668
669					pgc_pcie: power-domain@1 {
670						#power-domain-cells = <0>;
671						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
672						power-domains = <&pgc_hsiomix>;
673						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
674					};
675
676					pgc_otg1: power-domain@2 {
677						#power-domain-cells = <0>;
678						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
679					};
680
681					pgc_otg2: power-domain@3 {
682						#power-domain-cells = <0>;
683						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
684					};
685
686					pgc_gpumix: power-domain@4 {
687						#power-domain-cells = <0>;
688						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
689						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
690							 <&clk IMX8MM_CLK_GPU_AHB>;
691						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
692								  <&clk IMX8MM_CLK_GPU_AHB>;
693						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
694									 <&clk IMX8MM_SYS_PLL1_800M>;
695						assigned-clock-rates = <800000000>, <400000000>;
696					};
697
698					pgc_gpu: power-domain@5 {
699						#power-domain-cells = <0>;
700						reg = <IMX8MM_POWER_DOMAIN_GPU>;
701						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
702							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
703							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
704							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
705						resets = <&src IMX8MQ_RESET_GPU_RESET>;
706						power-domains = <&pgc_gpumix>;
707					};
708
709					pgc_vpumix: power-domain@6 {
710						#power-domain-cells = <0>;
711						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
712						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
713						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
714						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
715					};
716
717					pgc_vpu_g1: power-domain@7 {
718						#power-domain-cells = <0>;
719						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
720					};
721
722					pgc_vpu_g2: power-domain@8 {
723						#power-domain-cells = <0>;
724						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
725					};
726
727					pgc_vpu_h1: power-domain@9 {
728						#power-domain-cells = <0>;
729						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
730					};
731
732					pgc_dispmix: power-domain@10 {
733						#power-domain-cells = <0>;
734						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
735						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
736							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
737						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
738								  <&clk IMX8MM_CLK_DISP_APB>;
739						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
740									 <&clk IMX8MM_SYS_PLL1_800M>;
741						assigned-clock-rates = <500000000>, <200000000>;
742					};
743
744					pgc_mipi: power-domain@11 {
745						#power-domain-cells = <0>;
746						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
747					};
748				};
749			};
750		};
751
752		aips2: bus@30400000 {
753			compatible = "fsl,aips-bus", "simple-bus";
754			reg = <0x30400000 0x400000>;
755			#address-cells = <1>;
756			#size-cells = <1>;
757			ranges = <0x30400000 0x30400000 0x400000>;
758
759			pwm1: pwm@30660000 {
760				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
761				reg = <0x30660000 0x10000>;
762				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
763				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
764					<&clk IMX8MM_CLK_PWM1_ROOT>;
765				clock-names = "ipg", "per";
766				#pwm-cells = <3>;
767				status = "disabled";
768			};
769
770			pwm2: pwm@30670000 {
771				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
772				reg = <0x30670000 0x10000>;
773				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
774				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
775					 <&clk IMX8MM_CLK_PWM2_ROOT>;
776				clock-names = "ipg", "per";
777				#pwm-cells = <3>;
778				status = "disabled";
779			};
780
781			pwm3: pwm@30680000 {
782				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
783				reg = <0x30680000 0x10000>;
784				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
785				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
786					 <&clk IMX8MM_CLK_PWM3_ROOT>;
787				clock-names = "ipg", "per";
788				#pwm-cells = <3>;
789				status = "disabled";
790			};
791
792			pwm4: pwm@30690000 {
793				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
794				reg = <0x30690000 0x10000>;
795				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
796				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
797					 <&clk IMX8MM_CLK_PWM4_ROOT>;
798				clock-names = "ipg", "per";
799				#pwm-cells = <3>;
800				status = "disabled";
801			};
802
803			system_counter: timer@306a0000 {
804				compatible = "nxp,sysctr-timer";
805				reg = <0x306a0000 0x20000>;
806				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
807				clocks = <&osc_24m>;
808				clock-names = "per";
809			};
810		};
811
812		aips3: bus@30800000 {
813			compatible = "fsl,aips-bus", "simple-bus";
814			reg = <0x30800000 0x400000>;
815			#address-cells = <1>;
816			#size-cells = <1>;
817			ranges = <0x30800000 0x30800000 0x400000>,
818				 <0x8000000 0x8000000 0x10000000>;
819
820			spba1: spba-bus@30800000 {
821				compatible = "fsl,spba-bus", "simple-bus";
822				#address-cells = <1>;
823				#size-cells = <1>;
824				reg = <0x30800000 0x100000>;
825				ranges;
826
827				ecspi1: spi@30820000 {
828					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
829					#address-cells = <1>;
830					#size-cells = <0>;
831					reg = <0x30820000 0x10000>;
832					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
833					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
834						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
835					clock-names = "ipg", "per";
836					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
837					dma-names = "rx", "tx";
838					status = "disabled";
839				};
840
841				ecspi2: spi@30830000 {
842					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
843					#address-cells = <1>;
844					#size-cells = <0>;
845					reg = <0x30830000 0x10000>;
846					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
847					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
848						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
849					clock-names = "ipg", "per";
850					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
851					dma-names = "rx", "tx";
852					status = "disabled";
853				};
854
855				ecspi3: spi@30840000 {
856					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
857					#address-cells = <1>;
858					#size-cells = <0>;
859					reg = <0x30840000 0x10000>;
860					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
861					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
862						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
863					clock-names = "ipg", "per";
864					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
865					dma-names = "rx", "tx";
866					status = "disabled";
867				};
868
869				uart1: serial@30860000 {
870					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
871					reg = <0x30860000 0x10000>;
872					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
873					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
874						 <&clk IMX8MM_CLK_UART1_ROOT>;
875					clock-names = "ipg", "per";
876					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
877					dma-names = "rx", "tx";
878					status = "disabled";
879				};
880
881				uart3: serial@30880000 {
882					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
883					reg = <0x30880000 0x10000>;
884					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
885					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
886						 <&clk IMX8MM_CLK_UART3_ROOT>;
887					clock-names = "ipg", "per";
888					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
889					dma-names = "rx", "tx";
890					status = "disabled";
891				};
892
893				uart2: serial@30890000 {
894					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
895					reg = <0x30890000 0x10000>;
896					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
897					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
898						 <&clk IMX8MM_CLK_UART2_ROOT>;
899					clock-names = "ipg", "per";
900					status = "disabled";
901				};
902			};
903
904			crypto: crypto@30900000 {
905				compatible = "fsl,sec-v4.0";
906				#address-cells = <1>;
907				#size-cells = <1>;
908				reg = <0x30900000 0x40000>;
909				ranges = <0 0x30900000 0x40000>;
910				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
911				clocks = <&clk IMX8MM_CLK_AHB>,
912					 <&clk IMX8MM_CLK_IPG_ROOT>;
913				clock-names = "aclk", "ipg";
914
915				sec_jr0: jr@1000 {
916					compatible = "fsl,sec-v4.0-job-ring";
917					reg = <0x1000 0x1000>;
918					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
919					status = "disabled";
920				};
921
922				sec_jr1: jr@2000 {
923					compatible = "fsl,sec-v4.0-job-ring";
924					reg = <0x2000 0x1000>;
925					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
926				};
927
928				sec_jr2: jr@3000 {
929					compatible = "fsl,sec-v4.0-job-ring";
930					reg = <0x3000 0x1000>;
931					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
932				};
933			};
934
935			i2c1: i2c@30a20000 {
936				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
937				#address-cells = <1>;
938				#size-cells = <0>;
939				reg = <0x30a20000 0x10000>;
940				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
941				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
942				status = "disabled";
943			};
944
945			i2c2: i2c@30a30000 {
946				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
947				#address-cells = <1>;
948				#size-cells = <0>;
949				reg = <0x30a30000 0x10000>;
950				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
951				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
952				status = "disabled";
953			};
954
955			i2c3: i2c@30a40000 {
956				#address-cells = <1>;
957				#size-cells = <0>;
958				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
959				reg = <0x30a40000 0x10000>;
960				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
961				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
962				status = "disabled";
963			};
964
965			i2c4: i2c@30a50000 {
966				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
967				#address-cells = <1>;
968				#size-cells = <0>;
969				reg = <0x30a50000 0x10000>;
970				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
971				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
972				status = "disabled";
973			};
974
975			uart4: serial@30a60000 {
976				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
977				reg = <0x30a60000 0x10000>;
978				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
979				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
980					 <&clk IMX8MM_CLK_UART4_ROOT>;
981				clock-names = "ipg", "per";
982				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
983				dma-names = "rx", "tx";
984				status = "disabled";
985			};
986
987			mu: mailbox@30aa0000 {
988				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
989				reg = <0x30aa0000 0x10000>;
990				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
991				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
992				#mbox-cells = <2>;
993			};
994
995			usdhc1: mmc@30b40000 {
996				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
997				reg = <0x30b40000 0x10000>;
998				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
999				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1000					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1001					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
1002				clock-names = "ipg", "ahb", "per";
1003				fsl,tuning-start-tap = <20>;
1004				fsl,tuning-step = <2>;
1005				bus-width = <4>;
1006				status = "disabled";
1007			};
1008
1009			usdhc2: mmc@30b50000 {
1010				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1011				reg = <0x30b50000 0x10000>;
1012				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1013				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1014					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1015					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
1016				clock-names = "ipg", "ahb", "per";
1017				fsl,tuning-start-tap = <20>;
1018				fsl,tuning-step = <2>;
1019				bus-width = <4>;
1020				status = "disabled";
1021			};
1022
1023			usdhc3: mmc@30b60000 {
1024				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1025				reg = <0x30b60000 0x10000>;
1026				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1027				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1028					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1029					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
1030				clock-names = "ipg", "ahb", "per";
1031				fsl,tuning-start-tap = <20>;
1032				fsl,tuning-step = <2>;
1033				bus-width = <4>;
1034				status = "disabled";
1035			};
1036
1037			flexspi: spi@30bb0000 {
1038				#address-cells = <1>;
1039				#size-cells = <0>;
1040				compatible = "nxp,imx8mm-fspi";
1041				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
1042				reg-names = "fspi_base", "fspi_mmap";
1043				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1044				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
1045					 <&clk IMX8MM_CLK_QSPI_ROOT>;
1046				clock-names = "fspi_en", "fspi";
1047				status = "disabled";
1048			};
1049
1050			sdma1: dma-controller@30bd0000 {
1051				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
1052				reg = <0x30bd0000 0x10000>;
1053				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1054				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
1055					 <&clk IMX8MM_CLK_AHB>;
1056				clock-names = "ipg", "ahb";
1057				#dma-cells = <3>;
1058				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1059			};
1060
1061			fec1: ethernet@30be0000 {
1062				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1063				reg = <0x30be0000 0x10000>;
1064				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1065					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1066					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1067					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1068				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
1069					 <&clk IMX8MM_CLK_ENET1_ROOT>,
1070					 <&clk IMX8MM_CLK_ENET_TIMER>,
1071					 <&clk IMX8MM_CLK_ENET_REF>,
1072					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
1073				clock-names = "ipg", "ahb", "ptp",
1074					      "enet_clk_ref", "enet_out";
1075				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
1076						  <&clk IMX8MM_CLK_ENET_TIMER>,
1077						  <&clk IMX8MM_CLK_ENET_REF>,
1078						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
1079				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
1080							 <&clk IMX8MM_SYS_PLL2_100M>,
1081							 <&clk IMX8MM_SYS_PLL2_125M>,
1082							 <&clk IMX8MM_SYS_PLL2_50M>;
1083				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1084				fsl,num-tx-queues = <3>;
1085				fsl,num-rx-queues = <3>;
1086				nvmem-cells = <&fec_mac_address>;
1087				nvmem-cell-names = "mac-address";
1088				fsl,stop-mode = <&gpr 0x10 3>;
1089				status = "disabled";
1090			};
1091
1092		};
1093
1094		aips4: bus@32c00000 {
1095			compatible = "fsl,aips-bus", "simple-bus";
1096			reg = <0x32c00000 0x400000>;
1097			#address-cells = <1>;
1098			#size-cells = <1>;
1099			ranges = <0x32c00000 0x32c00000 0x400000>;
1100
1101			csi: csi@32e20000 {
1102				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
1103				reg = <0x32e20000 0x1000>;
1104				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1105				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
1106				clock-names = "mclk";
1107				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
1108				status = "disabled";
1109
1110				port {
1111					csi_in: endpoint {
1112						remote-endpoint = <&imx8mm_mipi_csi_out>;
1113					};
1114				};
1115			};
1116
1117			disp_blk_ctrl: blk-ctrl@32e28000 {
1118				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
1119				reg = <0x32e28000 0x100>;
1120				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
1121						<&pgc_dispmix>, <&pgc_mipi>,
1122						<&pgc_mipi>;
1123				power-domain-names = "bus", "csi-bridge",
1124						     "lcdif", "mipi-dsi",
1125						     "mipi-csi";
1126				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1127					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1128					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1129					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1130					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1131					 <&clk IMX8MM_CLK_DISP_ROOT>,
1132					 <&clk IMX8MM_CLK_DSI_CORE>,
1133					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
1134					 <&clk IMX8MM_CLK_CSI1_CORE>,
1135					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1136				clock-names = "csi-bridge-axi","csi-bridge-apb",
1137					      "csi-bridge-core", "lcdif-axi",
1138					      "lcdif-apb", "lcdif-pix",
1139					      "dsi-pclk", "dsi-ref",
1140					      "csi-aclk", "csi-pclk";
1141				#power-domain-cells = <1>;
1142			};
1143
1144			mipi_csi: mipi-csi@32e30000 {
1145				compatible = "fsl,imx8mm-mipi-csi2";
1146				reg = <0x32e30000 0x1000>;
1147				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1148				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
1149						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1150				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
1151							  <&clk IMX8MM_SYS_PLL2_1000M>;
1152				clock-frequency = <333000000>;
1153				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1154					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1155					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
1156					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
1157				clock-names = "pclk", "wrap", "phy", "axi";
1158				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
1159				status = "disabled";
1160
1161				ports {
1162					#address-cells = <1>;
1163					#size-cells = <0>;
1164
1165					port@0 {
1166						reg = <0>;
1167					};
1168
1169					port@1 {
1170						reg = <1>;
1171
1172						imx8mm_mipi_csi_out: endpoint {
1173							remote-endpoint = <&csi_in>;
1174						};
1175					};
1176				};
1177			};
1178
1179			usbotg1: usb@32e40000 {
1180				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1181				reg = <0x32e40000 0x200>;
1182				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1183				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1184				clock-names = "usb1_ctrl_root_clk";
1185				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1186				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1187				phys = <&usbphynop1>;
1188				fsl,usbmisc = <&usbmisc1 0>;
1189				power-domains = <&pgc_hsiomix>;
1190				status = "disabled";
1191			};
1192
1193			usbmisc1: usbmisc@32e40200 {
1194				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1195				#index-cells = <1>;
1196				reg = <0x32e40200 0x200>;
1197			};
1198
1199			usbotg2: usb@32e50000 {
1200				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1201				reg = <0x32e50000 0x200>;
1202				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1203				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1204				clock-names = "usb1_ctrl_root_clk";
1205				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1206				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1207				phys = <&usbphynop2>;
1208				fsl,usbmisc = <&usbmisc2 0>;
1209				power-domains = <&pgc_hsiomix>;
1210				status = "disabled";
1211			};
1212
1213			usbmisc2: usbmisc@32e50200 {
1214				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1215				#index-cells = <1>;
1216				reg = <0x32e50200 0x200>;
1217			};
1218
1219			pcie_phy: pcie-phy@32f00000 {
1220				compatible = "fsl,imx8mm-pcie-phy";
1221				reg = <0x32f00000 0x10000>;
1222				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1223				clock-names = "ref";
1224				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1225				assigned-clock-rates = <100000000>;
1226				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
1227				resets = <&src IMX8MQ_RESET_PCIEPHY>;
1228				reset-names = "pciephy";
1229				#phy-cells = <0>;
1230				status = "disabled";
1231			};
1232		};
1233
1234		dma_apbh: dma-controller@33000000 {
1235			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1236			reg = <0x33000000 0x2000>;
1237			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1238				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1239				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1240				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1241			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
1242			#dma-cells = <1>;
1243			dma-channels = <4>;
1244			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1245		};
1246
1247		gpmi: nand-controller@33002000{
1248			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1249			#address-cells = <1>;
1250			#size-cells = <1>;
1251			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1252			reg-names = "gpmi-nand", "bch";
1253			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1254			interrupt-names = "bch";
1255			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1256				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1257			clock-names = "gpmi_io", "gpmi_bch_apb";
1258			dmas = <&dma_apbh 0>;
1259			dma-names = "rx-tx";
1260			status = "disabled";
1261		};
1262
1263		pcie0: pcie@33800000 {
1264			compatible = "fsl,imx8mm-pcie";
1265			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
1266			reg-names = "dbi", "config";
1267			#address-cells = <3>;
1268			#size-cells = <2>;
1269			device_type = "pci";
1270			bus-range = <0x00 0xff>;
1271			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
1272				   0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1273			num-lanes = <1>;
1274			num-viewport = <4>;
1275			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1276			interrupt-names = "msi";
1277			#interrupt-cells = <1>;
1278			interrupt-map-mask = <0 0 0 0x7>;
1279			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1280					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1281					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1282					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1283			fsl,max-link-speed = <2>;
1284			linux,pci-domain = <0>;
1285			power-domains = <&pgc_pcie>;
1286			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1287				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1288			reset-names = "apps", "turnoff";
1289			phys = <&pcie_phy>;
1290			phy-names = "pcie-phy";
1291			status = "disabled";
1292		};
1293
1294		gpu_3d: gpu@38000000 {
1295			compatible = "vivante,gc";
1296			reg = <0x38000000 0x8000>;
1297			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1298			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1299				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1300				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
1301				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
1302			clock-names = "reg", "bus", "core", "shader";
1303			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
1304					  <&clk IMX8MM_GPU_PLL_OUT>;
1305			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1306			assigned-clock-rates = <0>, <1000000000>;
1307			power-domains = <&pgc_gpu>;
1308		};
1309
1310		gpu_2d: gpu@38008000 {
1311			compatible = "vivante,gc";
1312			reg = <0x38008000 0x8000>;
1313			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1314			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1315				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1316				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
1317			clock-names = "reg", "bus", "core";
1318			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
1319					  <&clk IMX8MM_GPU_PLL_OUT>;
1320			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1321			assigned-clock-rates = <0>, <1000000000>;
1322			power-domains = <&pgc_gpu>;
1323		};
1324
1325		vpu_g1: video-codec@38300000 {
1326			compatible = "nxp,imx8mm-vpu-g1";
1327			reg = <0x38300000 0x10000>;
1328			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1329			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
1330			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
1331		};
1332
1333		vpu_g2: video-codec@38310000 {
1334			compatible = "nxp,imx8mq-vpu-g2";
1335			reg = <0x38310000 0x10000>;
1336			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1337			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
1338			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
1339		};
1340
1341		vpu_blk_ctrl: blk-ctrl@38330000 {
1342			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
1343			reg = <0x38330000 0x100>;
1344			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
1345					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
1346			power-domain-names = "bus", "g1", "g2", "h1";
1347			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
1348				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
1349				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
1350			clock-names = "g1", "g2", "h1";
1351			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
1352					  <&clk IMX8MM_CLK_VPU_G2>;
1353			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
1354						 <&clk IMX8MM_VPU_PLL_OUT>;
1355			assigned-clock-rates = <600000000>,
1356					       <600000000>;
1357			#power-domain-cells = <1>;
1358		};
1359
1360		gic: interrupt-controller@38800000 {
1361			compatible = "arm,gic-v3";
1362			reg = <0x38800000 0x10000>, /* GIC Dist */
1363			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1364			#interrupt-cells = <3>;
1365			interrupt-controller;
1366			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1367		};
1368
1369		ddrc: memory-controller@3d400000 {
1370			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1371			reg = <0x3d400000 0x400000>;
1372			clock-names = "core", "pll", "alt", "apb";
1373			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1374				 <&clk IMX8MM_DRAM_PLL>,
1375				 <&clk IMX8MM_CLK_DRAM_ALT>,
1376				 <&clk IMX8MM_CLK_DRAM_APB>;
1377		};
1378
1379		ddr-pmu@3d800000 {
1380			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1381			reg = <0x3d800000 0x400000>;
1382			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1383		};
1384	};
1385};
1386