1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mm-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/power/imx8mm-power.h>
11#include <dt-bindings/reset/imx8mq-reset.h>
12#include <dt-bindings/thermal/thermal.h>
13
14#include "imx8mm-pinfunc.h"
15
16/ {
17	interrupt-parent = <&gic>;
18	#address-cells = <2>;
19	#size-cells = <2>;
20
21	aliases {
22		ethernet0 = &fec1;
23		gpio0 = &gpio1;
24		gpio1 = &gpio2;
25		gpio2 = &gpio3;
26		gpio3 = &gpio4;
27		gpio4 = &gpio5;
28		i2c0 = &i2c1;
29		i2c1 = &i2c2;
30		i2c2 = &i2c3;
31		i2c3 = &i2c4;
32		mmc0 = &usdhc1;
33		mmc1 = &usdhc2;
34		mmc2 = &usdhc3;
35		serial0 = &uart1;
36		serial1 = &uart2;
37		serial2 = &uart3;
38		serial3 = &uart4;
39		spi0 = &ecspi1;
40		spi1 = &ecspi2;
41		spi2 = &ecspi3;
42	};
43
44	cpus {
45		#address-cells = <1>;
46		#size-cells = <0>;
47
48		idle-states {
49			entry-method = "psci";
50
51			cpu_pd_wait: cpu-pd-wait {
52				compatible = "arm,idle-state";
53				arm,psci-suspend-param = <0x0010033>;
54				local-timer-stop;
55				entry-latency-us = <1000>;
56				exit-latency-us = <700>;
57				min-residency-us = <2700>;
58			};
59		};
60
61		A53_0: cpu@0 {
62			device_type = "cpu";
63			compatible = "arm,cortex-a53";
64			reg = <0x0>;
65			clock-latency = <61036>; /* two CLK32 periods */
66			clocks = <&clk IMX8MM_CLK_ARM>;
67			enable-method = "psci";
68			i-cache-size = <0x8000>;
69			i-cache-line-size = <64>;
70			i-cache-sets = <256>;
71			d-cache-size = <0x8000>;
72			d-cache-line-size = <64>;
73			d-cache-sets = <128>;
74			next-level-cache = <&A53_L2>;
75			operating-points-v2 = <&a53_opp_table>;
76			nvmem-cells = <&cpu_speed_grade>;
77			nvmem-cell-names = "speed_grade";
78			cpu-idle-states = <&cpu_pd_wait>;
79			#cooling-cells = <2>;
80		};
81
82		A53_1: cpu@1 {
83			device_type = "cpu";
84			compatible = "arm,cortex-a53";
85			reg = <0x1>;
86			clock-latency = <61036>; /* two CLK32 periods */
87			clocks = <&clk IMX8MM_CLK_ARM>;
88			enable-method = "psci";
89			i-cache-size = <0x8000>;
90			i-cache-line-size = <64>;
91			i-cache-sets = <256>;
92			d-cache-size = <0x8000>;
93			d-cache-line-size = <64>;
94			d-cache-sets = <128>;
95			next-level-cache = <&A53_L2>;
96			operating-points-v2 = <&a53_opp_table>;
97			cpu-idle-states = <&cpu_pd_wait>;
98			#cooling-cells = <2>;
99		};
100
101		A53_2: cpu@2 {
102			device_type = "cpu";
103			compatible = "arm,cortex-a53";
104			reg = <0x2>;
105			clock-latency = <61036>; /* two CLK32 periods */
106			clocks = <&clk IMX8MM_CLK_ARM>;
107			enable-method = "psci";
108			i-cache-size = <0x8000>;
109			i-cache-line-size = <64>;
110			i-cache-sets = <256>;
111			d-cache-size = <0x8000>;
112			d-cache-line-size = <64>;
113			d-cache-sets = <128>;
114			next-level-cache = <&A53_L2>;
115			operating-points-v2 = <&a53_opp_table>;
116			cpu-idle-states = <&cpu_pd_wait>;
117			#cooling-cells = <2>;
118		};
119
120		A53_3: cpu@3 {
121			device_type = "cpu";
122			compatible = "arm,cortex-a53";
123			reg = <0x3>;
124			clock-latency = <61036>; /* two CLK32 periods */
125			clocks = <&clk IMX8MM_CLK_ARM>;
126			enable-method = "psci";
127			i-cache-size = <0x8000>;
128			i-cache-line-size = <64>;
129			i-cache-sets = <256>;
130			d-cache-size = <0x8000>;
131			d-cache-line-size = <64>;
132			d-cache-sets = <128>;
133			next-level-cache = <&A53_L2>;
134			operating-points-v2 = <&a53_opp_table>;
135			cpu-idle-states = <&cpu_pd_wait>;
136			#cooling-cells = <2>;
137		};
138
139		A53_L2: l2-cache0 {
140			compatible = "cache";
141			cache-level = <2>;
142			cache-size = <0x80000>;
143			cache-line-size = <64>;
144			cache-sets = <512>;
145		};
146	};
147
148	a53_opp_table: opp-table {
149		compatible = "operating-points-v2";
150		opp-shared;
151
152		opp-1200000000 {
153			opp-hz = /bits/ 64 <1200000000>;
154			opp-microvolt = <850000>;
155			opp-supported-hw = <0xe>, <0x7>;
156			clock-latency-ns = <150000>;
157			opp-suspend;
158		};
159
160		opp-1600000000 {
161			opp-hz = /bits/ 64 <1600000000>;
162			opp-microvolt = <950000>;
163			opp-supported-hw = <0xc>, <0x7>;
164			clock-latency-ns = <150000>;
165			opp-suspend;
166		};
167
168		opp-1800000000 {
169			opp-hz = /bits/ 64 <1800000000>;
170			opp-microvolt = <1000000>;
171			opp-supported-hw = <0x8>, <0x3>;
172			clock-latency-ns = <150000>;
173			opp-suspend;
174		};
175	};
176
177	osc_32k: clock-osc-32k {
178		compatible = "fixed-clock";
179		#clock-cells = <0>;
180		clock-frequency = <32768>;
181		clock-output-names = "osc_32k";
182	};
183
184	osc_24m: clock-osc-24m {
185		compatible = "fixed-clock";
186		#clock-cells = <0>;
187		clock-frequency = <24000000>;
188		clock-output-names = "osc_24m";
189	};
190
191	clk_ext1: clock-ext1 {
192		compatible = "fixed-clock";
193		#clock-cells = <0>;
194		clock-frequency = <133000000>;
195		clock-output-names = "clk_ext1";
196	};
197
198	clk_ext2: clock-ext2 {
199		compatible = "fixed-clock";
200		#clock-cells = <0>;
201		clock-frequency = <133000000>;
202		clock-output-names = "clk_ext2";
203	};
204
205	clk_ext3: clock-ext3 {
206		compatible = "fixed-clock";
207		#clock-cells = <0>;
208		clock-frequency = <133000000>;
209		clock-output-names = "clk_ext3";
210	};
211
212	clk_ext4: clock-ext4 {
213		compatible = "fixed-clock";
214		#clock-cells = <0>;
215		clock-frequency= <133000000>;
216		clock-output-names = "clk_ext4";
217	};
218
219	psci {
220		compatible = "arm,psci-1.0";
221		method = "smc";
222	};
223
224	pmu {
225		compatible = "arm,cortex-a53-pmu";
226		interrupts = <GIC_PPI 7
227			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
228	};
229
230	timer {
231		compatible = "arm,armv8-timer";
232		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
233			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
234			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
235			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
236		clock-frequency = <8000000>;
237		arm,no-tick-in-suspend;
238	};
239
240	thermal-zones {
241		cpu-thermal {
242			polling-delay-passive = <250>;
243			polling-delay = <2000>;
244			thermal-sensors = <&tmu>;
245			trips {
246				cpu_alert0: trip0 {
247					temperature = <85000>;
248					hysteresis = <2000>;
249					type = "passive";
250				};
251
252				cpu_crit0: trip1 {
253					temperature = <95000>;
254					hysteresis = <2000>;
255					type = "critical";
256				};
257			};
258
259			cooling-maps {
260				map0 {
261					trip = <&cpu_alert0>;
262					cooling-device =
263						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
264						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
265						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
266						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
267				};
268			};
269		};
270	};
271
272	usbphynop1: usbphynop1 {
273		#phy-cells = <0>;
274		compatible = "usb-nop-xceiv";
275		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
276		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
277		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
278		clock-names = "main_clk";
279	};
280
281	usbphynop2: usbphynop2 {
282		#phy-cells = <0>;
283		compatible = "usb-nop-xceiv";
284		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
285		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
286		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
287		clock-names = "main_clk";
288	};
289
290	soc@0 {
291		compatible = "fsl,imx8mm-soc", "simple-bus";
292		#address-cells = <1>;
293		#size-cells = <1>;
294		ranges = <0x0 0x0 0x0 0x3e000000>;
295		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
296		nvmem-cells = <&imx8mm_uid>;
297		nvmem-cell-names = "soc_unique_id";
298
299		aips1: bus@30000000 {
300			compatible = "fsl,aips-bus", "simple-bus";
301			reg = <0x30000000 0x400000>;
302			#address-cells = <1>;
303			#size-cells = <1>;
304			ranges = <0x30000000 0x30000000 0x400000>;
305
306			spba2: spba-bus@30000000 {
307				compatible = "fsl,spba-bus", "simple-bus";
308				#address-cells = <1>;
309				#size-cells = <1>;
310				reg = <0x30000000 0x100000>;
311				ranges;
312
313				sai1: sai@30010000 {
314					#sound-dai-cells = <0>;
315					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
316					reg = <0x30010000 0x10000>;
317					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
318					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
319						 <&clk IMX8MM_CLK_SAI1_ROOT>,
320						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
321					clock-names = "bus", "mclk1", "mclk2", "mclk3";
322					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
323					dma-names = "rx", "tx";
324					status = "disabled";
325				};
326
327				sai2: sai@30020000 {
328					#sound-dai-cells = <0>;
329					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
330					reg = <0x30020000 0x10000>;
331					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
332					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
333						<&clk IMX8MM_CLK_SAI2_ROOT>,
334						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
335					clock-names = "bus", "mclk1", "mclk2", "mclk3";
336					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
337					dma-names = "rx", "tx";
338					status = "disabled";
339				};
340
341				sai3: sai@30030000 {
342					#sound-dai-cells = <0>;
343					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
344					reg = <0x30030000 0x10000>;
345					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
346					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
347						 <&clk IMX8MM_CLK_SAI3_ROOT>,
348						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
349					clock-names = "bus", "mclk1", "mclk2", "mclk3";
350					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
351					dma-names = "rx", "tx";
352					status = "disabled";
353				};
354
355				sai5: sai@30050000 {
356					#sound-dai-cells = <0>;
357					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
358					reg = <0x30050000 0x10000>;
359					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
360					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
361						 <&clk IMX8MM_CLK_SAI5_ROOT>,
362						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
363					clock-names = "bus", "mclk1", "mclk2", "mclk3";
364					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
365					dma-names = "rx", "tx";
366					status = "disabled";
367				};
368
369				sai6: sai@30060000 {
370					#sound-dai-cells = <0>;
371					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
372					reg = <0x30060000 0x10000>;
373					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
374					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
375						 <&clk IMX8MM_CLK_SAI6_ROOT>,
376						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
377					clock-names = "bus", "mclk1", "mclk2", "mclk3";
378					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
379					dma-names = "rx", "tx";
380					status = "disabled";
381				};
382
383				micfil: audio-controller@30080000 {
384					compatible = "fsl,imx8mm-micfil";
385					reg = <0x30080000 0x10000>;
386					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
387						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
388						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
389						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
390					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
391						 <&clk IMX8MM_CLK_PDM_ROOT>,
392						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
393						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
394						 <&clk IMX8MM_CLK_EXT3>;
395					clock-names = "ipg_clk", "ipg_clk_app",
396						      "pll8k", "pll11k", "clkext3";
397					dmas = <&sdma2 24 25 0x80000000>;
398					dma-names = "rx";
399					status = "disabled";
400				};
401
402				spdif1: spdif@30090000 {
403					compatible = "fsl,imx35-spdif";
404					reg = <0x30090000 0x10000>;
405					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
406					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
407						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
408						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
409						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
410						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
411						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
412						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
413						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
414						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
415						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
416					clock-names = "core", "rxtx0",
417						      "rxtx1", "rxtx2",
418						      "rxtx3", "rxtx4",
419						      "rxtx5", "rxtx6",
420						      "rxtx7", "spba";
421					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
422					dma-names = "rx", "tx";
423					status = "disabled";
424				};
425			};
426
427			gpio1: gpio@30200000 {
428				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
429				reg = <0x30200000 0x10000>;
430				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
431					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
432				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
433				gpio-controller;
434				#gpio-cells = <2>;
435				interrupt-controller;
436				#interrupt-cells = <2>;
437				gpio-ranges = <&iomuxc 0 10 30>;
438			};
439
440			gpio2: gpio@30210000 {
441				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
442				reg = <0x30210000 0x10000>;
443				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
444					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
445				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
446				gpio-controller;
447				#gpio-cells = <2>;
448				interrupt-controller;
449				#interrupt-cells = <2>;
450				gpio-ranges = <&iomuxc 0 40 21>;
451			};
452
453			gpio3: gpio@30220000 {
454				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
455				reg = <0x30220000 0x10000>;
456				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
457					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
458				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
459				gpio-controller;
460				#gpio-cells = <2>;
461				interrupt-controller;
462				#interrupt-cells = <2>;
463				gpio-ranges = <&iomuxc 0 61 26>;
464			};
465
466			gpio4: gpio@30230000 {
467				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
468				reg = <0x30230000 0x10000>;
469				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
470					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
471				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
472				gpio-controller;
473				#gpio-cells = <2>;
474				interrupt-controller;
475				#interrupt-cells = <2>;
476				gpio-ranges = <&iomuxc 0 87 32>;
477			};
478
479			gpio5: gpio@30240000 {
480				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
481				reg = <0x30240000 0x10000>;
482				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
483					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
484				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
485				gpio-controller;
486				#gpio-cells = <2>;
487				interrupt-controller;
488				#interrupt-cells = <2>;
489				gpio-ranges = <&iomuxc 0 119 30>;
490			};
491
492			tmu: tmu@30260000 {
493				compatible = "fsl,imx8mm-tmu";
494				reg = <0x30260000 0x10000>;
495				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
496				#thermal-sensor-cells = <0>;
497			};
498
499			wdog1: watchdog@30280000 {
500				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
501				reg = <0x30280000 0x10000>;
502				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
503				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
504				status = "disabled";
505			};
506
507			wdog2: watchdog@30290000 {
508				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
509				reg = <0x30290000 0x10000>;
510				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
511				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
512				status = "disabled";
513			};
514
515			wdog3: watchdog@302a0000 {
516				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
517				reg = <0x302a0000 0x10000>;
518				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
519				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
520				status = "disabled";
521			};
522
523			sdma2: dma-controller@302c0000 {
524				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
525				reg = <0x302c0000 0x10000>;
526				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
527				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
528					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
529				clock-names = "ipg", "ahb";
530				#dma-cells = <3>;
531				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
532			};
533
534			sdma3: dma-controller@302b0000 {
535				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
536				reg = <0x302b0000 0x10000>;
537				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
538				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
539				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
540				clock-names = "ipg", "ahb";
541				#dma-cells = <3>;
542				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
543			};
544
545			iomuxc: pinctrl@30330000 {
546				compatible = "fsl,imx8mm-iomuxc";
547				reg = <0x30330000 0x10000>;
548			};
549
550			gpr: iomuxc-gpr@30340000 {
551				compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
552				reg = <0x30340000 0x10000>;
553			};
554
555			ocotp: efuse@30350000 {
556				compatible = "fsl,imx8mm-ocotp", "syscon";
557				reg = <0x30350000 0x10000>;
558				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
559				/* For nvmem subnodes */
560				#address-cells = <1>;
561				#size-cells = <1>;
562
563				imx8mm_uid: unique-id@410 {
564					reg = <0x4 0x8>;
565				};
566
567				cpu_speed_grade: speed-grade@10 {
568					reg = <0x10 4>;
569				};
570
571				fec_mac_address: mac-address@90 {
572					reg = <0x90 6>;
573				};
574			};
575
576			anatop: anatop@30360000 {
577				compatible = "fsl,imx8mm-anatop", "syscon";
578				reg = <0x30360000 0x10000>;
579			};
580
581			snvs: snvs@30370000 {
582				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
583				reg = <0x30370000 0x10000>;
584
585				snvs_rtc: snvs-rtc-lp {
586					compatible = "fsl,sec-v4.0-mon-rtc-lp";
587					regmap = <&snvs>;
588					offset = <0x34>;
589					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
590						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
591					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
592					clock-names = "snvs-rtc";
593				};
594
595				snvs_pwrkey: snvs-powerkey {
596					compatible = "fsl,sec-v4.0-pwrkey";
597					regmap = <&snvs>;
598					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
599					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
600					clock-names = "snvs-pwrkey";
601					linux,keycode = <KEY_POWER>;
602					wakeup-source;
603					status = "disabled";
604				};
605			};
606
607			clk: clock-controller@30380000 {
608				compatible = "fsl,imx8mm-ccm";
609				reg = <0x30380000 0x10000>;
610				#clock-cells = <1>;
611				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
612					 <&clk_ext3>, <&clk_ext4>;
613				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
614					      "clk_ext3", "clk_ext4";
615				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
616						<&clk IMX8MM_CLK_A53_CORE>,
617						<&clk IMX8MM_CLK_NOC>,
618						<&clk IMX8MM_CLK_AUDIO_AHB>,
619						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
620						<&clk IMX8MM_SYS_PLL3>,
621						<&clk IMX8MM_VIDEO_PLL1>,
622						<&clk IMX8MM_AUDIO_PLL1>;
623				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
624							 <&clk IMX8MM_ARM_PLL_OUT>,
625							 <&clk IMX8MM_SYS_PLL3_OUT>,
626							 <&clk IMX8MM_SYS_PLL1_800M>;
627				assigned-clock-rates = <0>, <0>, <0>,
628							<400000000>,
629							<400000000>,
630							<750000000>,
631							<594000000>,
632							<393216000>;
633			};
634
635			src: reset-controller@30390000 {
636				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
637				reg = <0x30390000 0x10000>;
638				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
639				#reset-cells = <1>;
640			};
641
642			gpc: gpc@303a0000 {
643				compatible = "fsl,imx8mm-gpc";
644				reg = <0x303a0000 0x10000>;
645				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
646				interrupt-parent = <&gic>;
647				interrupt-controller;
648				#interrupt-cells = <3>;
649
650				pgc {
651					#address-cells = <1>;
652					#size-cells = <0>;
653
654					pgc_hsiomix: power-domain@0 {
655						#power-domain-cells = <0>;
656						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
657						clocks = <&clk IMX8MM_CLK_USB_BUS>;
658						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
659						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
660					};
661
662					pgc_pcie: power-domain@1 {
663						#power-domain-cells = <0>;
664						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
665						power-domains = <&pgc_hsiomix>;
666						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
667					};
668
669					pgc_otg1: power-domain@2 {
670						#power-domain-cells = <0>;
671						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
672						power-domains = <&pgc_hsiomix>;
673					};
674
675					pgc_otg2: power-domain@3 {
676						#power-domain-cells = <0>;
677						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
678						power-domains = <&pgc_hsiomix>;
679					};
680
681					pgc_gpumix: power-domain@4 {
682						#power-domain-cells = <0>;
683						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
684						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
685							 <&clk IMX8MM_CLK_GPU_AHB>;
686						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
687								  <&clk IMX8MM_CLK_GPU_AHB>;
688						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
689									 <&clk IMX8MM_SYS_PLL1_800M>;
690						assigned-clock-rates = <800000000>, <400000000>;
691					};
692
693					pgc_gpu: power-domain@5 {
694						#power-domain-cells = <0>;
695						reg = <IMX8MM_POWER_DOMAIN_GPU>;
696						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
697							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
698							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
699							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
700						resets = <&src IMX8MQ_RESET_GPU_RESET>;
701						power-domains = <&pgc_gpumix>;
702					};
703
704					pgc_vpumix: power-domain@6 {
705						#power-domain-cells = <0>;
706						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
707						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
708						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
709						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
710					};
711
712					pgc_vpu_g1: power-domain@7 {
713						#power-domain-cells = <0>;
714						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
715					};
716
717					pgc_vpu_g2: power-domain@8 {
718						#power-domain-cells = <0>;
719						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
720					};
721
722					pgc_vpu_h1: power-domain@9 {
723						#power-domain-cells = <0>;
724						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
725					};
726
727					pgc_dispmix: power-domain@10 {
728						#power-domain-cells = <0>;
729						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
730						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
731							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
732						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
733								  <&clk IMX8MM_CLK_DISP_APB>;
734						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
735									 <&clk IMX8MM_SYS_PLL1_800M>;
736						assigned-clock-rates = <500000000>, <200000000>;
737					};
738
739					pgc_mipi: power-domain@11 {
740						#power-domain-cells = <0>;
741						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
742					};
743				};
744			};
745		};
746
747		aips2: bus@30400000 {
748			compatible = "fsl,aips-bus", "simple-bus";
749			reg = <0x30400000 0x400000>;
750			#address-cells = <1>;
751			#size-cells = <1>;
752			ranges = <0x30400000 0x30400000 0x400000>;
753
754			pwm1: pwm@30660000 {
755				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
756				reg = <0x30660000 0x10000>;
757				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
758				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
759					<&clk IMX8MM_CLK_PWM1_ROOT>;
760				clock-names = "ipg", "per";
761				#pwm-cells = <3>;
762				status = "disabled";
763			};
764
765			pwm2: pwm@30670000 {
766				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
767				reg = <0x30670000 0x10000>;
768				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
769				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
770					 <&clk IMX8MM_CLK_PWM2_ROOT>;
771				clock-names = "ipg", "per";
772				#pwm-cells = <3>;
773				status = "disabled";
774			};
775
776			pwm3: pwm@30680000 {
777				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
778				reg = <0x30680000 0x10000>;
779				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
780				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
781					 <&clk IMX8MM_CLK_PWM3_ROOT>;
782				clock-names = "ipg", "per";
783				#pwm-cells = <3>;
784				status = "disabled";
785			};
786
787			pwm4: pwm@30690000 {
788				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
789				reg = <0x30690000 0x10000>;
790				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
791				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
792					 <&clk IMX8MM_CLK_PWM4_ROOT>;
793				clock-names = "ipg", "per";
794				#pwm-cells = <3>;
795				status = "disabled";
796			};
797
798			system_counter: timer@306a0000 {
799				compatible = "nxp,sysctr-timer";
800				reg = <0x306a0000 0x20000>;
801				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
802				clocks = <&osc_24m>;
803				clock-names = "per";
804			};
805		};
806
807		aips3: bus@30800000 {
808			compatible = "fsl,aips-bus", "simple-bus";
809			reg = <0x30800000 0x400000>;
810			#address-cells = <1>;
811			#size-cells = <1>;
812			ranges = <0x30800000 0x30800000 0x400000>,
813				 <0x8000000 0x8000000 0x10000000>;
814
815			spba1: spba-bus@30800000 {
816				compatible = "fsl,spba-bus", "simple-bus";
817				#address-cells = <1>;
818				#size-cells = <1>;
819				reg = <0x30800000 0x100000>;
820				ranges;
821
822				ecspi1: spi@30820000 {
823					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
824					#address-cells = <1>;
825					#size-cells = <0>;
826					reg = <0x30820000 0x10000>;
827					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
828					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
829						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
830					clock-names = "ipg", "per";
831					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
832					dma-names = "rx", "tx";
833					status = "disabled";
834				};
835
836				ecspi2: spi@30830000 {
837					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
838					#address-cells = <1>;
839					#size-cells = <0>;
840					reg = <0x30830000 0x10000>;
841					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
842					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
843						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
844					clock-names = "ipg", "per";
845					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
846					dma-names = "rx", "tx";
847					status = "disabled";
848				};
849
850				ecspi3: spi@30840000 {
851					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
852					#address-cells = <1>;
853					#size-cells = <0>;
854					reg = <0x30840000 0x10000>;
855					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
856					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
857						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
858					clock-names = "ipg", "per";
859					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
860					dma-names = "rx", "tx";
861					status = "disabled";
862				};
863
864				uart1: serial@30860000 {
865					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
866					reg = <0x30860000 0x10000>;
867					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
868					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
869						 <&clk IMX8MM_CLK_UART1_ROOT>;
870					clock-names = "ipg", "per";
871					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
872					dma-names = "rx", "tx";
873					status = "disabled";
874				};
875
876				uart3: serial@30880000 {
877					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
878					reg = <0x30880000 0x10000>;
879					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
880					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
881						 <&clk IMX8MM_CLK_UART3_ROOT>;
882					clock-names = "ipg", "per";
883					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
884					dma-names = "rx", "tx";
885					status = "disabled";
886				};
887
888				uart2: serial@30890000 {
889					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
890					reg = <0x30890000 0x10000>;
891					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
892					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
893						 <&clk IMX8MM_CLK_UART2_ROOT>;
894					clock-names = "ipg", "per";
895					status = "disabled";
896				};
897			};
898
899			crypto: crypto@30900000 {
900				compatible = "fsl,sec-v4.0";
901				#address-cells = <1>;
902				#size-cells = <1>;
903				reg = <0x30900000 0x40000>;
904				ranges = <0 0x30900000 0x40000>;
905				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
906				clocks = <&clk IMX8MM_CLK_AHB>,
907					 <&clk IMX8MM_CLK_IPG_ROOT>;
908				clock-names = "aclk", "ipg";
909
910				sec_jr0: jr@1000 {
911					compatible = "fsl,sec-v4.0-job-ring";
912					reg = <0x1000 0x1000>;
913					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
914				};
915
916				sec_jr1: jr@2000 {
917					compatible = "fsl,sec-v4.0-job-ring";
918					reg = <0x2000 0x1000>;
919					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
920				};
921
922				sec_jr2: jr@3000 {
923					compatible = "fsl,sec-v4.0-job-ring";
924					reg = <0x3000 0x1000>;
925					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
926				};
927			};
928
929			i2c1: i2c@30a20000 {
930				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
931				#address-cells = <1>;
932				#size-cells = <0>;
933				reg = <0x30a20000 0x10000>;
934				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
935				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
936				status = "disabled";
937			};
938
939			i2c2: i2c@30a30000 {
940				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
941				#address-cells = <1>;
942				#size-cells = <0>;
943				reg = <0x30a30000 0x10000>;
944				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
945				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
946				status = "disabled";
947			};
948
949			i2c3: i2c@30a40000 {
950				#address-cells = <1>;
951				#size-cells = <0>;
952				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
953				reg = <0x30a40000 0x10000>;
954				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
955				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
956				status = "disabled";
957			};
958
959			i2c4: i2c@30a50000 {
960				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
961				#address-cells = <1>;
962				#size-cells = <0>;
963				reg = <0x30a50000 0x10000>;
964				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
965				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
966				status = "disabled";
967			};
968
969			uart4: serial@30a60000 {
970				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
971				reg = <0x30a60000 0x10000>;
972				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
973				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
974					 <&clk IMX8MM_CLK_UART4_ROOT>;
975				clock-names = "ipg", "per";
976				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
977				dma-names = "rx", "tx";
978				status = "disabled";
979			};
980
981			mu: mailbox@30aa0000 {
982				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
983				reg = <0x30aa0000 0x10000>;
984				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
985				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
986				#mbox-cells = <2>;
987			};
988
989			usdhc1: mmc@30b40000 {
990				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
991				reg = <0x30b40000 0x10000>;
992				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
993				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
994					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
995					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
996				clock-names = "ipg", "ahb", "per";
997				fsl,tuning-start-tap = <20>;
998				fsl,tuning-step= <2>;
999				bus-width = <4>;
1000				status = "disabled";
1001			};
1002
1003			usdhc2: mmc@30b50000 {
1004				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1005				reg = <0x30b50000 0x10000>;
1006				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1007				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1008					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1009					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
1010				clock-names = "ipg", "ahb", "per";
1011				fsl,tuning-start-tap = <20>;
1012				fsl,tuning-step= <2>;
1013				bus-width = <4>;
1014				status = "disabled";
1015			};
1016
1017			usdhc3: mmc@30b60000 {
1018				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1019				reg = <0x30b60000 0x10000>;
1020				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1021				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1022					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1023					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
1024				clock-names = "ipg", "ahb", "per";
1025				fsl,tuning-start-tap = <20>;
1026				fsl,tuning-step= <2>;
1027				bus-width = <4>;
1028				status = "disabled";
1029			};
1030
1031			flexspi: spi@30bb0000 {
1032				#address-cells = <1>;
1033				#size-cells = <0>;
1034				compatible = "nxp,imx8mm-fspi";
1035				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
1036				reg-names = "fspi_base", "fspi_mmap";
1037				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1038				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
1039					 <&clk IMX8MM_CLK_QSPI_ROOT>;
1040				clock-names = "fspi_en", "fspi";
1041				status = "disabled";
1042			};
1043
1044			sdma1: dma-controller@30bd0000 {
1045				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
1046				reg = <0x30bd0000 0x10000>;
1047				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1048				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
1049					 <&clk IMX8MM_CLK_AHB>;
1050				clock-names = "ipg", "ahb";
1051				#dma-cells = <3>;
1052				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1053			};
1054
1055			fec1: ethernet@30be0000 {
1056				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1057				reg = <0x30be0000 0x10000>;
1058				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1059					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1060					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1061					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1062				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
1063					 <&clk IMX8MM_CLK_ENET1_ROOT>,
1064					 <&clk IMX8MM_CLK_ENET_TIMER>,
1065					 <&clk IMX8MM_CLK_ENET_REF>,
1066					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
1067				clock-names = "ipg", "ahb", "ptp",
1068					      "enet_clk_ref", "enet_out";
1069				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
1070						  <&clk IMX8MM_CLK_ENET_TIMER>,
1071						  <&clk IMX8MM_CLK_ENET_REF>,
1072						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
1073				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
1074							 <&clk IMX8MM_SYS_PLL2_100M>,
1075							 <&clk IMX8MM_SYS_PLL2_125M>,
1076							 <&clk IMX8MM_SYS_PLL2_50M>;
1077				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1078				fsl,num-tx-queues = <3>;
1079				fsl,num-rx-queues = <3>;
1080				nvmem-cells = <&fec_mac_address>;
1081				nvmem-cell-names = "mac-address";
1082				fsl,stop-mode = <&gpr 0x10 3>;
1083				status = "disabled";
1084			};
1085
1086		};
1087
1088		aips4: bus@32c00000 {
1089			compatible = "fsl,aips-bus", "simple-bus";
1090			reg = <0x32c00000 0x400000>;
1091			#address-cells = <1>;
1092			#size-cells = <1>;
1093			ranges = <0x32c00000 0x32c00000 0x400000>;
1094
1095			csi: csi@32e20000 {
1096				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
1097				reg = <0x32e20000 0x1000>;
1098				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1099				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
1100				clock-names = "mclk";
1101				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
1102				status = "disabled";
1103
1104				port {
1105					csi_in: endpoint {
1106						remote-endpoint = <&imx8mm_mipi_csi_out>;
1107					};
1108				};
1109			};
1110
1111			disp_blk_ctrl: blk-ctrl@32e28000 {
1112				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
1113				reg = <0x32e28000 0x100>;
1114				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
1115						<&pgc_dispmix>, <&pgc_mipi>,
1116						<&pgc_mipi>;
1117				power-domain-names = "bus", "csi-bridge",
1118						     "lcdif", "mipi-dsi",
1119						     "mipi-csi";
1120				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1121					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1122					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1123					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1124					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1125					 <&clk IMX8MM_CLK_DISP_ROOT>,
1126					 <&clk IMX8MM_CLK_DSI_CORE>,
1127					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
1128					 <&clk IMX8MM_CLK_CSI1_CORE>,
1129					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1130				clock-names = "csi-bridge-axi","csi-bridge-apb",
1131					      "csi-bridge-core", "lcdif-axi",
1132					      "lcdif-apb", "lcdif-pix",
1133					      "dsi-pclk", "dsi-ref",
1134					      "csi-aclk", "csi-pclk";
1135				#power-domain-cells = <1>;
1136			};
1137
1138			mipi_csi: mipi-csi@32e30000 {
1139				compatible = "fsl,imx8mm-mipi-csi2";
1140				reg = <0x32e30000 0x1000>;
1141				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1142				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
1143						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1144				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
1145							  <&clk IMX8MM_SYS_PLL2_1000M>;
1146				clock-frequency = <333000000>;
1147				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1148					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1149					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
1150					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
1151				clock-names = "pclk", "wrap", "phy", "axi";
1152				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
1153				status = "disabled";
1154
1155				ports {
1156					#address-cells = <1>;
1157					#size-cells = <0>;
1158
1159					port@0 {
1160						reg = <0>;
1161					};
1162
1163					port@1 {
1164						reg = <1>;
1165
1166						imx8mm_mipi_csi_out: endpoint {
1167							remote-endpoint = <&csi_in>;
1168						};
1169					};
1170				};
1171			};
1172
1173			usbotg1: usb@32e40000 {
1174				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1175				reg = <0x32e40000 0x200>;
1176				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1177				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1178				clock-names = "usb1_ctrl_root_clk";
1179				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1180				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1181				phys = <&usbphynop1>;
1182				fsl,usbmisc = <&usbmisc1 0>;
1183				power-domains = <&pgc_otg1>;
1184				status = "disabled";
1185			};
1186
1187			usbmisc1: usbmisc@32e40200 {
1188				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1189				#index-cells = <1>;
1190				reg = <0x32e40200 0x200>;
1191			};
1192
1193			usbotg2: usb@32e50000 {
1194				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1195				reg = <0x32e50000 0x200>;
1196				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1197				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1198				clock-names = "usb1_ctrl_root_clk";
1199				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1200				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1201				phys = <&usbphynop2>;
1202				fsl,usbmisc = <&usbmisc2 0>;
1203				power-domains = <&pgc_otg2>;
1204				status = "disabled";
1205			};
1206
1207			usbmisc2: usbmisc@32e50200 {
1208				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1209				#index-cells = <1>;
1210				reg = <0x32e50200 0x200>;
1211			};
1212
1213			pcie_phy: pcie-phy@32f00000 {
1214				compatible = "fsl,imx8mm-pcie-phy";
1215				reg = <0x32f00000 0x10000>;
1216				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1217				clock-names = "ref";
1218				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1219				assigned-clock-rates = <100000000>;
1220				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
1221				resets = <&src IMX8MQ_RESET_PCIEPHY>;
1222				reset-names = "pciephy";
1223				#phy-cells = <0>;
1224				status = "disabled";
1225			};
1226		};
1227
1228		dma_apbh: dma-controller@33000000 {
1229			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1230			reg = <0x33000000 0x2000>;
1231			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1232				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1233				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1234				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1235			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
1236			#dma-cells = <1>;
1237			dma-channels = <4>;
1238			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1239		};
1240
1241		gpmi: nand-controller@33002000{
1242			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1243			#address-cells = <1>;
1244			#size-cells = <1>;
1245			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1246			reg-names = "gpmi-nand", "bch";
1247			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1248			interrupt-names = "bch";
1249			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1250				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1251			clock-names = "gpmi_io", "gpmi_bch_apb";
1252			dmas = <&dma_apbh 0>;
1253			dma-names = "rx-tx";
1254			status = "disabled";
1255		};
1256
1257		pcie0: pcie@33800000 {
1258			compatible = "fsl,imx8mm-pcie";
1259			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
1260			reg-names = "dbi", "config";
1261			#address-cells = <3>;
1262			#size-cells = <2>;
1263			device_type = "pci";
1264			bus-range = <0x00 0xff>;
1265			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
1266				   0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1267			num-lanes = <1>;
1268			num-viewport = <4>;
1269			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1270			interrupt-names = "msi";
1271			#interrupt-cells = <1>;
1272			interrupt-map-mask = <0 0 0 0x7>;
1273			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1274					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1275					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1276					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1277			fsl,max-link-speed = <2>;
1278			linux,pci-domain = <0>;
1279			power-domains = <&pgc_pcie>;
1280			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1281				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1282			reset-names = "apps", "turnoff";
1283			phys = <&pcie_phy>;
1284			phy-names = "pcie-phy";
1285			status = "disabled";
1286		};
1287
1288		gpu_3d: gpu@38000000 {
1289			compatible = "vivante,gc";
1290			reg = <0x38000000 0x8000>;
1291			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1292			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1293				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1294				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
1295				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
1296			clock-names = "reg", "bus", "core", "shader";
1297			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
1298					  <&clk IMX8MM_GPU_PLL_OUT>;
1299			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1300			assigned-clock-rates = <0>, <1000000000>;
1301			power-domains = <&pgc_gpu>;
1302		};
1303
1304		gpu_2d: gpu@38008000 {
1305			compatible = "vivante,gc";
1306			reg = <0x38008000 0x8000>;
1307			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1308			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1309				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1310				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
1311			clock-names = "reg", "bus", "core";
1312			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
1313					  <&clk IMX8MM_GPU_PLL_OUT>;
1314			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1315			assigned-clock-rates = <0>, <1000000000>;
1316			power-domains = <&pgc_gpu>;
1317		};
1318
1319		vpu_g1: video-codec@38300000 {
1320			compatible = "nxp,imx8mm-vpu-g1";
1321			reg = <0x38300000 0x10000>;
1322			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1323			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
1324			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
1325		};
1326
1327		vpu_g2: video-codec@38310000 {
1328			compatible = "nxp,imx8mq-vpu-g2";
1329			reg = <0x38310000 0x10000>;
1330			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1331			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
1332			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
1333		};
1334
1335		vpu_blk_ctrl: blk-ctrl@38330000 {
1336			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
1337			reg = <0x38330000 0x100>;
1338			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
1339					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
1340			power-domain-names = "bus", "g1", "g2", "h1";
1341			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
1342				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
1343				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
1344			clock-names = "g1", "g2", "h1";
1345			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
1346					  <&clk IMX8MM_CLK_VPU_G2>;
1347			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
1348						 <&clk IMX8MM_VPU_PLL_OUT>;
1349			assigned-clock-rates = <600000000>,
1350					       <600000000>;
1351			#power-domain-cells = <1>;
1352		};
1353
1354		gic: interrupt-controller@38800000 {
1355			compatible = "arm,gic-v3";
1356			reg = <0x38800000 0x10000>, /* GIC Dist */
1357			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1358			#interrupt-cells = <3>;
1359			interrupt-controller;
1360			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1361		};
1362
1363		ddrc: memory-controller@3d400000 {
1364			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1365			reg = <0x3d400000 0x400000>;
1366			clock-names = "core", "pll", "alt", "apb";
1367			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1368				 <&clk IMX8MM_DRAM_PLL>,
1369				 <&clk IMX8MM_CLK_DRAM_ALT>,
1370				 <&clk IMX8MM_CLK_DRAM_APB>;
1371		};
1372
1373		ddr-pmu@3d800000 {
1374			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1375			reg = <0x3d800000 0x400000>;
1376			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1377		};
1378	};
1379};
1380