1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2019 NXP 4 */ 5 6#include <dt-bindings/clock/imx8mm-clock.h> 7#include <dt-bindings/gpio/gpio.h> 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10#include <dt-bindings/power/imx8mm-power.h> 11#include <dt-bindings/reset/imx8mq-reset.h> 12#include <dt-bindings/thermal/thermal.h> 13 14#include "imx8mm-pinfunc.h" 15 16/ { 17 interrupt-parent = <&gic>; 18 #address-cells = <2>; 19 #size-cells = <2>; 20 21 aliases { 22 ethernet0 = &fec1; 23 gpio0 = &gpio1; 24 gpio1 = &gpio2; 25 gpio2 = &gpio3; 26 gpio3 = &gpio4; 27 gpio4 = &gpio5; 28 i2c0 = &i2c1; 29 i2c1 = &i2c2; 30 i2c2 = &i2c3; 31 i2c3 = &i2c4; 32 mmc0 = &usdhc1; 33 mmc1 = &usdhc2; 34 mmc2 = &usdhc3; 35 serial0 = &uart1; 36 serial1 = &uart2; 37 serial2 = &uart3; 38 serial3 = &uart4; 39 spi0 = &ecspi1; 40 spi1 = &ecspi2; 41 spi2 = &ecspi3; 42 }; 43 44 cpus { 45 #address-cells = <1>; 46 #size-cells = <0>; 47 48 idle-states { 49 entry-method = "psci"; 50 51 cpu_pd_wait: cpu-pd-wait { 52 compatible = "arm,idle-state"; 53 arm,psci-suspend-param = <0x0010033>; 54 local-timer-stop; 55 entry-latency-us = <1000>; 56 exit-latency-us = <700>; 57 min-residency-us = <2700>; 58 }; 59 }; 60 61 A53_0: cpu@0 { 62 device_type = "cpu"; 63 compatible = "arm,cortex-a53"; 64 reg = <0x0>; 65 clock-latency = <61036>; /* two CLK32 periods */ 66 clocks = <&clk IMX8MM_CLK_ARM>; 67 enable-method = "psci"; 68 i-cache-size = <0x8000>; 69 i-cache-line-size = <64>; 70 i-cache-sets = <256>; 71 d-cache-size = <0x8000>; 72 d-cache-line-size = <64>; 73 d-cache-sets = <128>; 74 next-level-cache = <&A53_L2>; 75 operating-points-v2 = <&a53_opp_table>; 76 nvmem-cells = <&cpu_speed_grade>; 77 nvmem-cell-names = "speed_grade"; 78 cpu-idle-states = <&cpu_pd_wait>; 79 #cooling-cells = <2>; 80 }; 81 82 A53_1: cpu@1 { 83 device_type = "cpu"; 84 compatible = "arm,cortex-a53"; 85 reg = <0x1>; 86 clock-latency = <61036>; /* two CLK32 periods */ 87 clocks = <&clk IMX8MM_CLK_ARM>; 88 enable-method = "psci"; 89 i-cache-size = <0x8000>; 90 i-cache-line-size = <64>; 91 i-cache-sets = <256>; 92 d-cache-size = <0x8000>; 93 d-cache-line-size = <64>; 94 d-cache-sets = <128>; 95 next-level-cache = <&A53_L2>; 96 operating-points-v2 = <&a53_opp_table>; 97 cpu-idle-states = <&cpu_pd_wait>; 98 #cooling-cells = <2>; 99 }; 100 101 A53_2: cpu@2 { 102 device_type = "cpu"; 103 compatible = "arm,cortex-a53"; 104 reg = <0x2>; 105 clock-latency = <61036>; /* two CLK32 periods */ 106 clocks = <&clk IMX8MM_CLK_ARM>; 107 enable-method = "psci"; 108 i-cache-size = <0x8000>; 109 i-cache-line-size = <64>; 110 i-cache-sets = <256>; 111 d-cache-size = <0x8000>; 112 d-cache-line-size = <64>; 113 d-cache-sets = <128>; 114 next-level-cache = <&A53_L2>; 115 operating-points-v2 = <&a53_opp_table>; 116 cpu-idle-states = <&cpu_pd_wait>; 117 #cooling-cells = <2>; 118 }; 119 120 A53_3: cpu@3 { 121 device_type = "cpu"; 122 compatible = "arm,cortex-a53"; 123 reg = <0x3>; 124 clock-latency = <61036>; /* two CLK32 periods */ 125 clocks = <&clk IMX8MM_CLK_ARM>; 126 enable-method = "psci"; 127 i-cache-size = <0x8000>; 128 i-cache-line-size = <64>; 129 i-cache-sets = <256>; 130 d-cache-size = <0x8000>; 131 d-cache-line-size = <64>; 132 d-cache-sets = <128>; 133 next-level-cache = <&A53_L2>; 134 operating-points-v2 = <&a53_opp_table>; 135 cpu-idle-states = <&cpu_pd_wait>; 136 #cooling-cells = <2>; 137 }; 138 139 A53_L2: l2-cache0 { 140 compatible = "cache"; 141 cache-level = <2>; 142 cache-unified; 143 cache-size = <0x80000>; 144 cache-line-size = <64>; 145 cache-sets = <512>; 146 }; 147 }; 148 149 a53_opp_table: opp-table { 150 compatible = "operating-points-v2"; 151 opp-shared; 152 153 opp-1200000000 { 154 opp-hz = /bits/ 64 <1200000000>; 155 opp-microvolt = <850000>; 156 opp-supported-hw = <0xe>, <0x7>; 157 clock-latency-ns = <150000>; 158 opp-suspend; 159 }; 160 161 opp-1600000000 { 162 opp-hz = /bits/ 64 <1600000000>; 163 opp-microvolt = <950000>; 164 opp-supported-hw = <0xc>, <0x7>; 165 clock-latency-ns = <150000>; 166 opp-suspend; 167 }; 168 169 opp-1800000000 { 170 opp-hz = /bits/ 64 <1800000000>; 171 opp-microvolt = <1000000>; 172 opp-supported-hw = <0x8>, <0x3>; 173 clock-latency-ns = <150000>; 174 opp-suspend; 175 }; 176 }; 177 178 osc_32k: clock-osc-32k { 179 compatible = "fixed-clock"; 180 #clock-cells = <0>; 181 clock-frequency = <32768>; 182 clock-output-names = "osc_32k"; 183 }; 184 185 osc_24m: clock-osc-24m { 186 compatible = "fixed-clock"; 187 #clock-cells = <0>; 188 clock-frequency = <24000000>; 189 clock-output-names = "osc_24m"; 190 }; 191 192 clk_ext1: clock-ext1 { 193 compatible = "fixed-clock"; 194 #clock-cells = <0>; 195 clock-frequency = <133000000>; 196 clock-output-names = "clk_ext1"; 197 }; 198 199 clk_ext2: clock-ext2 { 200 compatible = "fixed-clock"; 201 #clock-cells = <0>; 202 clock-frequency = <133000000>; 203 clock-output-names = "clk_ext2"; 204 }; 205 206 clk_ext3: clock-ext3 { 207 compatible = "fixed-clock"; 208 #clock-cells = <0>; 209 clock-frequency = <133000000>; 210 clock-output-names = "clk_ext3"; 211 }; 212 213 clk_ext4: clock-ext4 { 214 compatible = "fixed-clock"; 215 #clock-cells = <0>; 216 clock-frequency = <133000000>; 217 clock-output-names = "clk_ext4"; 218 }; 219 220 psci { 221 compatible = "arm,psci-1.0"; 222 method = "smc"; 223 }; 224 225 pmu { 226 compatible = "arm,cortex-a53-pmu"; 227 interrupts = <GIC_PPI 7 228 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 229 }; 230 231 timer { 232 compatible = "arm,armv8-timer"; 233 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ 234 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ 235 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ 236 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ 237 clock-frequency = <8000000>; 238 arm,no-tick-in-suspend; 239 }; 240 241 thermal-zones { 242 cpu-thermal { 243 polling-delay-passive = <250>; 244 polling-delay = <2000>; 245 thermal-sensors = <&tmu>; 246 trips { 247 cpu_alert0: trip0 { 248 temperature = <85000>; 249 hysteresis = <2000>; 250 type = "passive"; 251 }; 252 253 cpu_crit0: trip1 { 254 temperature = <95000>; 255 hysteresis = <2000>; 256 type = "critical"; 257 }; 258 }; 259 260 cooling-maps { 261 map0 { 262 trip = <&cpu_alert0>; 263 cooling-device = 264 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 265 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 266 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 267 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 268 }; 269 }; 270 }; 271 }; 272 273 usbphynop1: usbphynop1 { 274 #phy-cells = <0>; 275 compatible = "usb-nop-xceiv"; 276 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 277 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 278 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; 279 clock-names = "main_clk"; 280 power-domains = <&pgc_otg1>; 281 }; 282 283 usbphynop2: usbphynop2 { 284 #phy-cells = <0>; 285 compatible = "usb-nop-xceiv"; 286 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 287 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; 288 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; 289 clock-names = "main_clk"; 290 power-domains = <&pgc_otg2>; 291 }; 292 293 soc: soc@0 { 294 compatible = "fsl,imx8mm-soc", "simple-bus"; 295 #address-cells = <1>; 296 #size-cells = <1>; 297 ranges = <0x0 0x0 0x0 0x3e000000>; 298 dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; 299 nvmem-cells = <&imx8mm_uid>; 300 nvmem-cell-names = "soc_unique_id"; 301 302 aips1: bus@30000000 { 303 compatible = "fsl,aips-bus", "simple-bus"; 304 reg = <0x30000000 0x400000>; 305 #address-cells = <1>; 306 #size-cells = <1>; 307 ranges = <0x30000000 0x30000000 0x400000>; 308 309 spba2: spba-bus@30000000 { 310 compatible = "fsl,spba-bus", "simple-bus"; 311 #address-cells = <1>; 312 #size-cells = <1>; 313 reg = <0x30000000 0x100000>; 314 ranges; 315 316 sai1: sai@30010000 { 317 #sound-dai-cells = <0>; 318 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 319 reg = <0x30010000 0x10000>; 320 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 321 clocks = <&clk IMX8MM_CLK_SAI1_IPG>, 322 <&clk IMX8MM_CLK_SAI1_ROOT>, 323 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 324 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 325 dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; 326 dma-names = "rx", "tx"; 327 status = "disabled"; 328 }; 329 330 sai2: sai@30020000 { 331 #sound-dai-cells = <0>; 332 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 333 reg = <0x30020000 0x10000>; 334 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 335 clocks = <&clk IMX8MM_CLK_SAI2_IPG>, 336 <&clk IMX8MM_CLK_SAI2_ROOT>, 337 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 338 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 339 dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; 340 dma-names = "rx", "tx"; 341 status = "disabled"; 342 }; 343 344 sai3: sai@30030000 { 345 #sound-dai-cells = <0>; 346 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 347 reg = <0x30030000 0x10000>; 348 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 349 clocks = <&clk IMX8MM_CLK_SAI3_IPG>, 350 <&clk IMX8MM_CLK_SAI3_ROOT>, 351 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 352 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 353 dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; 354 dma-names = "rx", "tx"; 355 status = "disabled"; 356 }; 357 358 sai5: sai@30050000 { 359 #sound-dai-cells = <0>; 360 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 361 reg = <0x30050000 0x10000>; 362 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 363 clocks = <&clk IMX8MM_CLK_SAI5_IPG>, 364 <&clk IMX8MM_CLK_SAI5_ROOT>, 365 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 366 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 367 dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; 368 dma-names = "rx", "tx"; 369 status = "disabled"; 370 }; 371 372 sai6: sai@30060000 { 373 #sound-dai-cells = <0>; 374 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; 375 reg = <0x30060000 0x10000>; 376 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; 377 clocks = <&clk IMX8MM_CLK_SAI6_IPG>, 378 <&clk IMX8MM_CLK_SAI6_ROOT>, 379 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; 380 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 381 dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; 382 dma-names = "rx", "tx"; 383 status = "disabled"; 384 }; 385 386 micfil: audio-controller@30080000 { 387 compatible = "fsl,imx8mm-micfil"; 388 reg = <0x30080000 0x10000>; 389 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 390 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 391 <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, 392 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 393 clocks = <&clk IMX8MM_CLK_PDM_IPG>, 394 <&clk IMX8MM_CLK_PDM_ROOT>, 395 <&clk IMX8MM_AUDIO_PLL1_OUT>, 396 <&clk IMX8MM_AUDIO_PLL2_OUT>, 397 <&clk IMX8MM_CLK_EXT3>; 398 clock-names = "ipg_clk", "ipg_clk_app", 399 "pll8k", "pll11k", "clkext3"; 400 dmas = <&sdma2 24 25 0x80000000>; 401 dma-names = "rx"; 402 status = "disabled"; 403 }; 404 405 spdif1: spdif@30090000 { 406 compatible = "fsl,imx35-spdif"; 407 reg = <0x30090000 0x10000>; 408 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 409 clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ 410 <&clk IMX8MM_CLK_24M>, /* rxtx0 */ 411 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ 412 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ 413 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ 414 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ 415 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ 416 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ 417 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ 418 <&clk IMX8MM_CLK_DUMMY>; /* spba */ 419 clock-names = "core", "rxtx0", 420 "rxtx1", "rxtx2", 421 "rxtx3", "rxtx4", 422 "rxtx5", "rxtx6", 423 "rxtx7", "spba"; 424 dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; 425 dma-names = "rx", "tx"; 426 status = "disabled"; 427 }; 428 }; 429 430 gpio1: gpio@30200000 { 431 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 432 reg = <0x30200000 0x10000>; 433 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 434 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 435 clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; 436 gpio-controller; 437 #gpio-cells = <2>; 438 interrupt-controller; 439 #interrupt-cells = <2>; 440 gpio-ranges = <&iomuxc 0 10 30>; 441 }; 442 443 gpio2: gpio@30210000 { 444 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 445 reg = <0x30210000 0x10000>; 446 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, 447 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; 448 clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; 449 gpio-controller; 450 #gpio-cells = <2>; 451 interrupt-controller; 452 #interrupt-cells = <2>; 453 gpio-ranges = <&iomuxc 0 40 21>; 454 }; 455 456 gpio3: gpio@30220000 { 457 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 458 reg = <0x30220000 0x10000>; 459 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, 460 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; 461 clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; 462 gpio-controller; 463 #gpio-cells = <2>; 464 interrupt-controller; 465 #interrupt-cells = <2>; 466 gpio-ranges = <&iomuxc 0 61 26>; 467 }; 468 469 gpio4: gpio@30230000 { 470 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 471 reg = <0x30230000 0x10000>; 472 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, 473 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 474 clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; 475 gpio-controller; 476 #gpio-cells = <2>; 477 interrupt-controller; 478 #interrupt-cells = <2>; 479 gpio-ranges = <&iomuxc 0 87 32>; 480 }; 481 482 gpio5: gpio@30240000 { 483 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; 484 reg = <0x30240000 0x10000>; 485 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, 486 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 487 clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; 488 gpio-controller; 489 #gpio-cells = <2>; 490 interrupt-controller; 491 #interrupt-cells = <2>; 492 gpio-ranges = <&iomuxc 0 119 30>; 493 }; 494 495 tmu: tmu@30260000 { 496 compatible = "fsl,imx8mm-tmu"; 497 reg = <0x30260000 0x10000>; 498 clocks = <&clk IMX8MM_CLK_TMU_ROOT>; 499 nvmem-cells = <&tmu_calib>; 500 nvmem-cell-names = "calib"; 501 #thermal-sensor-cells = <0>; 502 }; 503 504 wdog1: watchdog@30280000 { 505 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 506 reg = <0x30280000 0x10000>; 507 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; 508 clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>; 509 status = "disabled"; 510 }; 511 512 wdog2: watchdog@30290000 { 513 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 514 reg = <0x30290000 0x10000>; 515 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; 516 clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>; 517 status = "disabled"; 518 }; 519 520 wdog3: watchdog@302a0000 { 521 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt"; 522 reg = <0x302a0000 0x10000>; 523 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 524 clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>; 525 status = "disabled"; 526 }; 527 528 sdma2: dma-controller@302c0000 { 529 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 530 reg = <0x302c0000 0x10000>; 531 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; 532 clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, 533 <&clk IMX8MM_CLK_SDMA2_ROOT>; 534 clock-names = "ipg", "ahb"; 535 #dma-cells = <3>; 536 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 537 }; 538 539 sdma3: dma-controller@302b0000 { 540 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 541 reg = <0x302b0000 0x10000>; 542 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; 543 clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, 544 <&clk IMX8MM_CLK_SDMA3_ROOT>; 545 clock-names = "ipg", "ahb"; 546 #dma-cells = <3>; 547 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 548 }; 549 550 iomuxc: pinctrl@30330000 { 551 compatible = "fsl,imx8mm-iomuxc"; 552 reg = <0x30330000 0x10000>; 553 }; 554 555 gpr: syscon@30340000 { 556 compatible = "fsl,imx8mm-iomuxc-gpr", "syscon"; 557 reg = <0x30340000 0x10000>; 558 }; 559 560 ocotp: efuse@30350000 { 561 compatible = "fsl,imx8mm-ocotp", "syscon"; 562 reg = <0x30350000 0x10000>; 563 clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; 564 /* For nvmem subnodes */ 565 #address-cells = <1>; 566 #size-cells = <1>; 567 568 /* 569 * The register address below maps to the MX8M 570 * Fusemap Description Table entries this way. 571 * Assuming 572 * reg = <ADDR SIZE>; 573 * then 574 * Fuse Address = (ADDR * 4) + 0x400 575 * Note that if SIZE is greater than 4, then 576 * each subsequent fuse is located at offset 577 * +0x10 in Fusemap Description Table (e.g. 578 * reg = <0x4 0x8> describes fuses 0x410 and 579 * 0x420). 580 */ 581 imx8mm_uid: unique-id@4 { /* 0x410-0x420 */ 582 reg = <0x4 0x8>; 583 }; 584 585 cpu_speed_grade: speed-grade@10 { /* 0x440 */ 586 reg = <0x10 4>; 587 }; 588 589 tmu_calib: calib@3c { /* 0x4f0 */ 590 reg = <0x3c 4>; 591 }; 592 593 fec_mac_address: mac-address@90 { /* 0x640 */ 594 reg = <0x90 6>; 595 }; 596 }; 597 598 anatop: clock-controller@30360000 { 599 compatible = "fsl,imx8mm-anatop"; 600 reg = <0x30360000 0x10000>; 601 #clock-cells = <1>; 602 }; 603 604 snvs: snvs@30370000 { 605 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; 606 reg = <0x30370000 0x10000>; 607 608 snvs_rtc: snvs-rtc-lp { 609 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 610 regmap = <&snvs>; 611 offset = <0x34>; 612 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 613 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 614 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; 615 clock-names = "snvs-rtc"; 616 }; 617 618 snvs_pwrkey: snvs-powerkey { 619 compatible = "fsl,sec-v4.0-pwrkey"; 620 regmap = <&snvs>; 621 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 622 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; 623 clock-names = "snvs-pwrkey"; 624 linux,keycode = <KEY_POWER>; 625 wakeup-source; 626 status = "disabled"; 627 }; 628 629 snvs_lpgpr: snvs-lpgpr { 630 compatible = "fsl,imx8mm-snvs-lpgpr", 631 "fsl,imx7d-snvs-lpgpr"; 632 }; 633 }; 634 635 clk: clock-controller@30380000 { 636 compatible = "fsl,imx8mm-ccm"; 637 reg = <0x30380000 0x10000>; 638 #clock-cells = <1>; 639 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, 640 <&clk_ext3>, <&clk_ext4>; 641 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", 642 "clk_ext3", "clk_ext4"; 643 assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>, 644 <&clk IMX8MM_CLK_A53_CORE>, 645 <&clk IMX8MM_CLK_NOC>, 646 <&clk IMX8MM_CLK_AUDIO_AHB>, 647 <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, 648 <&clk IMX8MM_SYS_PLL3>, 649 <&clk IMX8MM_VIDEO_PLL1>, 650 <&clk IMX8MM_AUDIO_PLL1>; 651 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, 652 <&clk IMX8MM_ARM_PLL_OUT>, 653 <&clk IMX8MM_SYS_PLL3_OUT>, 654 <&clk IMX8MM_SYS_PLL1_800M>; 655 assigned-clock-rates = <0>, <0>, <0>, 656 <400000000>, 657 <400000000>, 658 <750000000>, 659 <594000000>, 660 <393216000>; 661 }; 662 663 src: reset-controller@30390000 { 664 compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; 665 reg = <0x30390000 0x10000>; 666 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; 667 #reset-cells = <1>; 668 }; 669 670 gpc: gpc@303a0000 { 671 compatible = "fsl,imx8mm-gpc"; 672 reg = <0x303a0000 0x10000>; 673 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 674 interrupt-parent = <&gic>; 675 interrupt-controller; 676 #interrupt-cells = <3>; 677 678 pgc { 679 #address-cells = <1>; 680 #size-cells = <0>; 681 682 pgc_hsiomix: power-domain@0 { 683 #power-domain-cells = <0>; 684 reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>; 685 clocks = <&clk IMX8MM_CLK_USB_BUS>; 686 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; 687 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; 688 }; 689 690 pgc_pcie: power-domain@1 { 691 #power-domain-cells = <0>; 692 reg = <IMX8MM_POWER_DOMAIN_PCIE>; 693 power-domains = <&pgc_hsiomix>; 694 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>; 695 }; 696 697 pgc_otg1: power-domain@2 { 698 #power-domain-cells = <0>; 699 reg = <IMX8MM_POWER_DOMAIN_OTG1>; 700 }; 701 702 pgc_otg2: power-domain@3 { 703 #power-domain-cells = <0>; 704 reg = <IMX8MM_POWER_DOMAIN_OTG2>; 705 }; 706 707 pgc_gpumix: power-domain@4 { 708 #power-domain-cells = <0>; 709 reg = <IMX8MM_POWER_DOMAIN_GPUMIX>; 710 clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>, 711 <&clk IMX8MM_CLK_GPU_AHB>; 712 assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>, 713 <&clk IMX8MM_CLK_GPU_AHB>; 714 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, 715 <&clk IMX8MM_SYS_PLL1_800M>; 716 assigned-clock-rates = <800000000>, <400000000>; 717 }; 718 719 pgc_gpu: power-domain@5 { 720 #power-domain-cells = <0>; 721 reg = <IMX8MM_POWER_DOMAIN_GPU>; 722 clocks = <&clk IMX8MM_CLK_GPU_AHB>, 723 <&clk IMX8MM_CLK_GPU_BUS_ROOT>, 724 <&clk IMX8MM_CLK_GPU2D_ROOT>, 725 <&clk IMX8MM_CLK_GPU3D_ROOT>; 726 resets = <&src IMX8MQ_RESET_GPU_RESET>; 727 power-domains = <&pgc_gpumix>; 728 }; 729 730 pgc_vpumix: power-domain@6 { 731 #power-domain-cells = <0>; 732 reg = <IMX8MM_POWER_DOMAIN_VPUMIX>; 733 clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>; 734 assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>; 735 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>; 736 }; 737 738 pgc_vpu_g1: power-domain@7 { 739 #power-domain-cells = <0>; 740 reg = <IMX8MM_POWER_DOMAIN_VPUG1>; 741 }; 742 743 pgc_vpu_g2: power-domain@8 { 744 #power-domain-cells = <0>; 745 reg = <IMX8MM_POWER_DOMAIN_VPUG2>; 746 }; 747 748 pgc_vpu_h1: power-domain@9 { 749 #power-domain-cells = <0>; 750 reg = <IMX8MM_POWER_DOMAIN_VPUH1>; 751 }; 752 753 pgc_dispmix: power-domain@10 { 754 #power-domain-cells = <0>; 755 reg = <IMX8MM_POWER_DOMAIN_DISPMIX>; 756 clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, 757 <&clk IMX8MM_CLK_DISP_AXI_ROOT>; 758 assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>, 759 <&clk IMX8MM_CLK_DISP_APB>; 760 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>, 761 <&clk IMX8MM_SYS_PLL1_800M>; 762 assigned-clock-rates = <500000000>, <200000000>; 763 }; 764 765 pgc_mipi: power-domain@11 { 766 #power-domain-cells = <0>; 767 reg = <IMX8MM_POWER_DOMAIN_MIPI>; 768 }; 769 }; 770 }; 771 }; 772 773 aips2: bus@30400000 { 774 compatible = "fsl,aips-bus", "simple-bus"; 775 reg = <0x30400000 0x400000>; 776 #address-cells = <1>; 777 #size-cells = <1>; 778 ranges = <0x30400000 0x30400000 0x400000>; 779 780 pwm1: pwm@30660000 { 781 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 782 reg = <0x30660000 0x10000>; 783 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 784 clocks = <&clk IMX8MM_CLK_PWM1_ROOT>, 785 <&clk IMX8MM_CLK_PWM1_ROOT>; 786 clock-names = "ipg", "per"; 787 #pwm-cells = <3>; 788 status = "disabled"; 789 }; 790 791 pwm2: pwm@30670000 { 792 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 793 reg = <0x30670000 0x10000>; 794 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 795 clocks = <&clk IMX8MM_CLK_PWM2_ROOT>, 796 <&clk IMX8MM_CLK_PWM2_ROOT>; 797 clock-names = "ipg", "per"; 798 #pwm-cells = <3>; 799 status = "disabled"; 800 }; 801 802 pwm3: pwm@30680000 { 803 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 804 reg = <0x30680000 0x10000>; 805 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 806 clocks = <&clk IMX8MM_CLK_PWM3_ROOT>, 807 <&clk IMX8MM_CLK_PWM3_ROOT>; 808 clock-names = "ipg", "per"; 809 #pwm-cells = <3>; 810 status = "disabled"; 811 }; 812 813 pwm4: pwm@30690000 { 814 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; 815 reg = <0x30690000 0x10000>; 816 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 817 clocks = <&clk IMX8MM_CLK_PWM4_ROOT>, 818 <&clk IMX8MM_CLK_PWM4_ROOT>; 819 clock-names = "ipg", "per"; 820 #pwm-cells = <3>; 821 status = "disabled"; 822 }; 823 824 system_counter: timer@306a0000 { 825 compatible = "nxp,sysctr-timer"; 826 reg = <0x306a0000 0x20000>; 827 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; 828 clocks = <&osc_24m>; 829 clock-names = "per"; 830 }; 831 }; 832 833 aips3: bus@30800000 { 834 compatible = "fsl,aips-bus", "simple-bus"; 835 reg = <0x30800000 0x400000>; 836 #address-cells = <1>; 837 #size-cells = <1>; 838 ranges = <0x30800000 0x30800000 0x400000>, 839 <0x8000000 0x8000000 0x10000000>; 840 841 spba1: spba-bus@30800000 { 842 compatible = "fsl,spba-bus", "simple-bus"; 843 #address-cells = <1>; 844 #size-cells = <1>; 845 reg = <0x30800000 0x100000>; 846 ranges; 847 848 ecspi1: spi@30820000 { 849 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 850 #address-cells = <1>; 851 #size-cells = <0>; 852 reg = <0x30820000 0x10000>; 853 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 854 clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>, 855 <&clk IMX8MM_CLK_ECSPI1_ROOT>; 856 clock-names = "ipg", "per"; 857 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; 858 dma-names = "rx", "tx"; 859 status = "disabled"; 860 }; 861 862 ecspi2: spi@30830000 { 863 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 864 #address-cells = <1>; 865 #size-cells = <0>; 866 reg = <0x30830000 0x10000>; 867 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 868 clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>, 869 <&clk IMX8MM_CLK_ECSPI2_ROOT>; 870 clock-names = "ipg", "per"; 871 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; 872 dma-names = "rx", "tx"; 873 status = "disabled"; 874 }; 875 876 ecspi3: spi@30840000 { 877 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; 878 #address-cells = <1>; 879 #size-cells = <0>; 880 reg = <0x30840000 0x10000>; 881 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; 882 clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>, 883 <&clk IMX8MM_CLK_ECSPI3_ROOT>; 884 clock-names = "ipg", "per"; 885 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; 886 dma-names = "rx", "tx"; 887 status = "disabled"; 888 }; 889 890 uart1: serial@30860000 { 891 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 892 reg = <0x30860000 0x10000>; 893 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 894 clocks = <&clk IMX8MM_CLK_UART1_ROOT>, 895 <&clk IMX8MM_CLK_UART1_ROOT>; 896 clock-names = "ipg", "per"; 897 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; 898 dma-names = "rx", "tx"; 899 status = "disabled"; 900 }; 901 902 uart3: serial@30880000 { 903 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 904 reg = <0x30880000 0x10000>; 905 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 906 clocks = <&clk IMX8MM_CLK_UART3_ROOT>, 907 <&clk IMX8MM_CLK_UART3_ROOT>; 908 clock-names = "ipg", "per"; 909 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; 910 dma-names = "rx", "tx"; 911 status = "disabled"; 912 }; 913 914 uart2: serial@30890000 { 915 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 916 reg = <0x30890000 0x10000>; 917 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; 918 clocks = <&clk IMX8MM_CLK_UART2_ROOT>, 919 <&clk IMX8MM_CLK_UART2_ROOT>; 920 clock-names = "ipg", "per"; 921 status = "disabled"; 922 }; 923 }; 924 925 crypto: crypto@30900000 { 926 compatible = "fsl,sec-v4.0"; 927 #address-cells = <1>; 928 #size-cells = <1>; 929 reg = <0x30900000 0x40000>; 930 ranges = <0 0x30900000 0x40000>; 931 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; 932 clocks = <&clk IMX8MM_CLK_AHB>, 933 <&clk IMX8MM_CLK_IPG_ROOT>; 934 clock-names = "aclk", "ipg"; 935 936 sec_jr0: jr@1000 { 937 compatible = "fsl,sec-v4.0-job-ring"; 938 reg = <0x1000 0x1000>; 939 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; 940 status = "disabled"; 941 }; 942 943 sec_jr1: jr@2000 { 944 compatible = "fsl,sec-v4.0-job-ring"; 945 reg = <0x2000 0x1000>; 946 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; 947 }; 948 949 sec_jr2: jr@3000 { 950 compatible = "fsl,sec-v4.0-job-ring"; 951 reg = <0x3000 0x1000>; 952 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; 953 }; 954 }; 955 956 i2c1: i2c@30a20000 { 957 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 958 #address-cells = <1>; 959 #size-cells = <0>; 960 reg = <0x30a20000 0x10000>; 961 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 962 clocks = <&clk IMX8MM_CLK_I2C1_ROOT>; 963 status = "disabled"; 964 }; 965 966 i2c2: i2c@30a30000 { 967 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 968 #address-cells = <1>; 969 #size-cells = <0>; 970 reg = <0x30a30000 0x10000>; 971 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 972 clocks = <&clk IMX8MM_CLK_I2C2_ROOT>; 973 status = "disabled"; 974 }; 975 976 i2c3: i2c@30a40000 { 977 #address-cells = <1>; 978 #size-cells = <0>; 979 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 980 reg = <0x30a40000 0x10000>; 981 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 982 clocks = <&clk IMX8MM_CLK_I2C3_ROOT>; 983 status = "disabled"; 984 }; 985 986 i2c4: i2c@30a50000 { 987 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; 988 #address-cells = <1>; 989 #size-cells = <0>; 990 reg = <0x30a50000 0x10000>; 991 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 992 clocks = <&clk IMX8MM_CLK_I2C4_ROOT>; 993 status = "disabled"; 994 }; 995 996 uart4: serial@30a60000 { 997 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart"; 998 reg = <0x30a60000 0x10000>; 999 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 1000 clocks = <&clk IMX8MM_CLK_UART4_ROOT>, 1001 <&clk IMX8MM_CLK_UART4_ROOT>; 1002 clock-names = "ipg", "per"; 1003 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; 1004 dma-names = "rx", "tx"; 1005 status = "disabled"; 1006 }; 1007 1008 mu: mailbox@30aa0000 { 1009 compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; 1010 reg = <0x30aa0000 0x10000>; 1011 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; 1012 clocks = <&clk IMX8MM_CLK_MU_ROOT>; 1013 #mbox-cells = <2>; 1014 }; 1015 1016 usdhc1: mmc@30b40000 { 1017 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 1018 reg = <0x30b40000 0x10000>; 1019 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 1020 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 1021 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 1022 <&clk IMX8MM_CLK_USDHC1_ROOT>; 1023 clock-names = "ipg", "ahb", "per"; 1024 fsl,tuning-start-tap = <20>; 1025 fsl,tuning-step = <2>; 1026 bus-width = <4>; 1027 status = "disabled"; 1028 }; 1029 1030 usdhc2: mmc@30b50000 { 1031 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 1032 reg = <0x30b50000 0x10000>; 1033 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 1034 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 1035 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 1036 <&clk IMX8MM_CLK_USDHC2_ROOT>; 1037 clock-names = "ipg", "ahb", "per"; 1038 fsl,tuning-start-tap = <20>; 1039 fsl,tuning-step = <2>; 1040 bus-width = <4>; 1041 status = "disabled"; 1042 }; 1043 1044 usdhc3: mmc@30b60000 { 1045 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; 1046 reg = <0x30b60000 0x10000>; 1047 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 1048 clocks = <&clk IMX8MM_CLK_IPG_ROOT>, 1049 <&clk IMX8MM_CLK_NAND_USDHC_BUS>, 1050 <&clk IMX8MM_CLK_USDHC3_ROOT>; 1051 clock-names = "ipg", "ahb", "per"; 1052 fsl,tuning-start-tap = <20>; 1053 fsl,tuning-step = <2>; 1054 bus-width = <4>; 1055 status = "disabled"; 1056 }; 1057 1058 flexspi: spi@30bb0000 { 1059 #address-cells = <1>; 1060 #size-cells = <0>; 1061 compatible = "nxp,imx8mm-fspi"; 1062 reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; 1063 reg-names = "fspi_base", "fspi_mmap"; 1064 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 1065 clocks = <&clk IMX8MM_CLK_QSPI_ROOT>, 1066 <&clk IMX8MM_CLK_QSPI_ROOT>; 1067 clock-names = "fspi_en", "fspi"; 1068 status = "disabled"; 1069 }; 1070 1071 sdma1: dma-controller@30bd0000 { 1072 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; 1073 reg = <0x30bd0000 0x10000>; 1074 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 1075 clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, 1076 <&clk IMX8MM_CLK_AHB>; 1077 clock-names = "ipg", "ahb"; 1078 #dma-cells = <3>; 1079 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; 1080 }; 1081 1082 fec1: ethernet@30be0000 { 1083 compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; 1084 reg = <0x30be0000 0x10000>; 1085 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 1086 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 1087 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 1088 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; 1089 clocks = <&clk IMX8MM_CLK_ENET1_ROOT>, 1090 <&clk IMX8MM_CLK_ENET1_ROOT>, 1091 <&clk IMX8MM_CLK_ENET_TIMER>, 1092 <&clk IMX8MM_CLK_ENET_REF>, 1093 <&clk IMX8MM_CLK_ENET_PHY_REF>; 1094 clock-names = "ipg", "ahb", "ptp", 1095 "enet_clk_ref", "enet_out"; 1096 assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>, 1097 <&clk IMX8MM_CLK_ENET_TIMER>, 1098 <&clk IMX8MM_CLK_ENET_REF>, 1099 <&clk IMX8MM_CLK_ENET_PHY_REF>; 1100 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, 1101 <&clk IMX8MM_SYS_PLL2_100M>, 1102 <&clk IMX8MM_SYS_PLL2_125M>, 1103 <&clk IMX8MM_SYS_PLL2_50M>; 1104 assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; 1105 fsl,num-tx-queues = <3>; 1106 fsl,num-rx-queues = <3>; 1107 nvmem-cells = <&fec_mac_address>; 1108 nvmem-cell-names = "mac-address"; 1109 fsl,stop-mode = <&gpr 0x10 3>; 1110 status = "disabled"; 1111 }; 1112 1113 }; 1114 1115 aips4: bus@32c00000 { 1116 compatible = "fsl,aips-bus", "simple-bus"; 1117 reg = <0x32c00000 0x400000>; 1118 #address-cells = <1>; 1119 #size-cells = <1>; 1120 ranges = <0x32c00000 0x32c00000 0x400000>; 1121 1122 lcdif: lcdif@32e00000 { 1123 compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif"; 1124 reg = <0x32e00000 0x10000>; 1125 clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, 1126 <&clk IMX8MM_CLK_DISP_APB_ROOT>, 1127 <&clk IMX8MM_CLK_DISP_AXI_ROOT>; 1128 clock-names = "pix", "axi", "disp_axi"; 1129 assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>, 1130 <&clk IMX8MM_CLK_DISP_AXI>, 1131 <&clk IMX8MM_CLK_DISP_APB>; 1132 assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, 1133 <&clk IMX8MM_SYS_PLL2_1000M>, 1134 <&clk IMX8MM_SYS_PLL1_800M>; 1135 assigned-clock-rates = <594000000>, <500000000>, <200000000>; 1136 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 1137 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; 1138 status = "disabled"; 1139 1140 port { 1141 lcdif_to_dsim: endpoint { 1142 remote-endpoint = <&dsim_from_lcdif>; 1143 }; 1144 }; 1145 }; 1146 1147 mipi_dsi: dsi@32e10000 { 1148 compatible = "fsl,imx8mm-mipi-dsim"; 1149 reg = <0x32e10000 0x400>; 1150 clocks = <&clk IMX8MM_CLK_DSI_CORE>, 1151 <&clk IMX8MM_CLK_DSI_PHY_REF>; 1152 clock-names = "bus_clk", "sclk_mipi"; 1153 assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, 1154 <&clk IMX8MM_CLK_DSI_PHY_REF>; 1155 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, 1156 <&clk IMX8MM_CLK_24M>; 1157 assigned-clock-rates = <266000000>, <24000000>; 1158 samsung,pll-clock-frequency = <24000000>; 1159 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 1160 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; 1161 status = "disabled"; 1162 1163 ports { 1164 #address-cells = <1>; 1165 #size-cells = <0>; 1166 1167 port@0 { 1168 reg = <0>; 1169 1170 dsim_from_lcdif: endpoint { 1171 remote-endpoint = <&lcdif_to_dsim>; 1172 }; 1173 }; 1174 }; 1175 }; 1176 1177 csi: csi@32e20000 { 1178 compatible = "fsl,imx8mm-csi", "fsl,imx7-csi"; 1179 reg = <0x32e20000 0x1000>; 1180 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 1181 clocks = <&clk IMX8MM_CLK_CSI1_ROOT>; 1182 clock-names = "mclk"; 1183 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>; 1184 status = "disabled"; 1185 1186 port { 1187 csi_in: endpoint { 1188 remote-endpoint = <&imx8mm_mipi_csi_out>; 1189 }; 1190 }; 1191 }; 1192 1193 disp_blk_ctrl: blk-ctrl@32e28000 { 1194 compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; 1195 reg = <0x32e28000 0x100>; 1196 power-domains = <&pgc_dispmix>, <&pgc_dispmix>, 1197 <&pgc_dispmix>, <&pgc_mipi>, 1198 <&pgc_mipi>; 1199 power-domain-names = "bus", "csi-bridge", 1200 "lcdif", "mipi-dsi", 1201 "mipi-csi"; 1202 clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, 1203 <&clk IMX8MM_CLK_DISP_APB_ROOT>, 1204 <&clk IMX8MM_CLK_CSI1_ROOT>, 1205 <&clk IMX8MM_CLK_DISP_AXI_ROOT>, 1206 <&clk IMX8MM_CLK_DISP_APB_ROOT>, 1207 <&clk IMX8MM_CLK_DISP_ROOT>, 1208 <&clk IMX8MM_CLK_DSI_CORE>, 1209 <&clk IMX8MM_CLK_DSI_PHY_REF>, 1210 <&clk IMX8MM_CLK_CSI1_CORE>, 1211 <&clk IMX8MM_CLK_CSI1_PHY_REF>; 1212 clock-names = "csi-bridge-axi","csi-bridge-apb", 1213 "csi-bridge-core", "lcdif-axi", 1214 "lcdif-apb", "lcdif-pix", 1215 "dsi-pclk", "dsi-ref", 1216 "csi-aclk", "csi-pclk"; 1217 #power-domain-cells = <1>; 1218 }; 1219 1220 mipi_csi: mipi-csi@32e30000 { 1221 compatible = "fsl,imx8mm-mipi-csi2"; 1222 reg = <0x32e30000 0x1000>; 1223 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 1224 assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>; 1225 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>; 1226 1227 clock-frequency = <333000000>; 1228 clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>, 1229 <&clk IMX8MM_CLK_CSI1_ROOT>, 1230 <&clk IMX8MM_CLK_CSI1_PHY_REF>, 1231 <&clk IMX8MM_CLK_DISP_AXI_ROOT>; 1232 clock-names = "pclk", "wrap", "phy", "axi"; 1233 power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>; 1234 status = "disabled"; 1235 1236 ports { 1237 #address-cells = <1>; 1238 #size-cells = <0>; 1239 1240 port@0 { 1241 reg = <0>; 1242 }; 1243 1244 port@1 { 1245 reg = <1>; 1246 1247 imx8mm_mipi_csi_out: endpoint { 1248 remote-endpoint = <&csi_in>; 1249 }; 1250 }; 1251 }; 1252 }; 1253 1254 usbotg1: usb@32e40000 { 1255 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; 1256 reg = <0x32e40000 0x200>; 1257 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 1258 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; 1259 clock-names = "usb1_ctrl_root_clk"; 1260 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; 1261 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; 1262 phys = <&usbphynop1>; 1263 fsl,usbmisc = <&usbmisc1 0>; 1264 power-domains = <&pgc_hsiomix>; 1265 status = "disabled"; 1266 }; 1267 1268 usbmisc1: usbmisc@32e40200 { 1269 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", 1270 "fsl,imx6q-usbmisc"; 1271 #index-cells = <1>; 1272 reg = <0x32e40200 0x200>; 1273 }; 1274 1275 usbotg2: usb@32e50000 { 1276 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb"; 1277 reg = <0x32e50000 0x200>; 1278 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 1279 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; 1280 clock-names = "usb1_ctrl_root_clk"; 1281 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; 1282 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; 1283 phys = <&usbphynop2>; 1284 fsl,usbmisc = <&usbmisc2 0>; 1285 power-domains = <&pgc_hsiomix>; 1286 status = "disabled"; 1287 }; 1288 1289 usbmisc2: usbmisc@32e50200 { 1290 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc", 1291 "fsl,imx6q-usbmisc"; 1292 #index-cells = <1>; 1293 reg = <0x32e50200 0x200>; 1294 }; 1295 1296 pcie_phy: pcie-phy@32f00000 { 1297 compatible = "fsl,imx8mm-pcie-phy"; 1298 reg = <0x32f00000 0x10000>; 1299 clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; 1300 clock-names = "ref"; 1301 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>; 1302 assigned-clock-rates = <100000000>; 1303 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>; 1304 resets = <&src IMX8MQ_RESET_PCIEPHY>; 1305 reset-names = "pciephy"; 1306 #phy-cells = <0>; 1307 status = "disabled"; 1308 }; 1309 }; 1310 1311 dma_apbh: dma-controller@33000000 { 1312 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; 1313 reg = <0x33000000 0x2000>; 1314 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 1315 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 1316 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, 1317 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1318 #dma-cells = <1>; 1319 dma-channels = <4>; 1320 clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 1321 }; 1322 1323 gpmi: nand-controller@33002000 { 1324 compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand"; 1325 #address-cells = <1>; 1326 #size-cells = <0>; 1327 reg = <0x33002000 0x2000>, <0x33004000 0x4000>; 1328 reg-names = "gpmi-nand", "bch"; 1329 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1330 interrupt-names = "bch"; 1331 clocks = <&clk IMX8MM_CLK_NAND_ROOT>, 1332 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; 1333 clock-names = "gpmi_io", "gpmi_bch_apb"; 1334 dmas = <&dma_apbh 0>; 1335 dma-names = "rx-tx"; 1336 status = "disabled"; 1337 }; 1338 1339 pcie0: pcie@33800000 { 1340 compatible = "fsl,imx8mm-pcie"; 1341 reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; 1342 reg-names = "dbi", "config"; 1343 #address-cells = <3>; 1344 #size-cells = <2>; 1345 device_type = "pci"; 1346 bus-range = <0x00 0xff>; 1347 ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */ 1348 0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ 1349 num-lanes = <1>; 1350 num-viewport = <4>; 1351 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 1352 interrupt-names = "msi"; 1353 #interrupt-cells = <1>; 1354 interrupt-map-mask = <0 0 0 0x7>; 1355 interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1356 <0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, 1357 <0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1358 <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; 1359 fsl,max-link-speed = <2>; 1360 linux,pci-domain = <0>; 1361 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, 1362 <&clk IMX8MM_CLK_PCIE1_PHY>, 1363 <&clk IMX8MM_CLK_PCIE1_AUX>; 1364 clock-names = "pcie", "pcie_bus", "pcie_aux"; 1365 power-domains = <&pgc_pcie>; 1366 resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, 1367 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; 1368 reset-names = "apps", "turnoff"; 1369 phys = <&pcie_phy>; 1370 phy-names = "pcie-phy"; 1371 status = "disabled"; 1372 }; 1373 1374 pcie0_ep: pcie-ep@33800000 { 1375 compatible = "fsl,imx8mm-pcie-ep"; 1376 reg = <0x33800000 0x400000>, 1377 <0x18000000 0x8000000>; 1378 reg-names = "dbi", "addr_space"; 1379 num-lanes = <1>; 1380 interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; 1381 interrupt-names = "dma"; 1382 fsl,max-link-speed = <2>; 1383 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, 1384 <&clk IMX8MM_CLK_PCIE1_PHY>, 1385 <&clk IMX8MM_CLK_PCIE1_AUX>; 1386 clock-names = "pcie", "pcie_bus", "pcie_aux"; 1387 power-domains = <&pgc_pcie>; 1388 resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, 1389 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>; 1390 reset-names = "apps", "turnoff"; 1391 phys = <&pcie_phy>; 1392 phy-names = "pcie-phy"; 1393 num-ib-windows = <4>; 1394 num-ob-windows = <4>; 1395 status = "disabled"; 1396 }; 1397 1398 gpu_3d: gpu@38000000 { 1399 compatible = "vivante,gc"; 1400 reg = <0x38000000 0x8000>; 1401 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 1402 clocks = <&clk IMX8MM_CLK_GPU_AHB>, 1403 <&clk IMX8MM_CLK_GPU_BUS_ROOT>, 1404 <&clk IMX8MM_CLK_GPU3D_ROOT>, 1405 <&clk IMX8MM_CLK_GPU3D_ROOT>; 1406 clock-names = "reg", "bus", "core", "shader"; 1407 assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, 1408 <&clk IMX8MM_GPU_PLL_OUT>; 1409 assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; 1410 assigned-clock-rates = <0>, <1000000000>; 1411 power-domains = <&pgc_gpu>; 1412 }; 1413 1414 gpu_2d: gpu@38008000 { 1415 compatible = "vivante,gc"; 1416 reg = <0x38008000 0x8000>; 1417 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 1418 clocks = <&clk IMX8MM_CLK_GPU_AHB>, 1419 <&clk IMX8MM_CLK_GPU_BUS_ROOT>, 1420 <&clk IMX8MM_CLK_GPU2D_ROOT>; 1421 clock-names = "reg", "bus", "core"; 1422 assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, 1423 <&clk IMX8MM_GPU_PLL_OUT>; 1424 assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; 1425 assigned-clock-rates = <0>, <1000000000>; 1426 power-domains = <&pgc_gpu>; 1427 }; 1428 1429 vpu_g1: video-codec@38300000 { 1430 compatible = "nxp,imx8mm-vpu-g1"; 1431 reg = <0x38300000 0x10000>; 1432 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 1433 clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>; 1434 power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>; 1435 }; 1436 1437 vpu_g2: video-codec@38310000 { 1438 compatible = "nxp,imx8mq-vpu-g2"; 1439 reg = <0x38310000 0x10000>; 1440 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 1441 clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>; 1442 power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>; 1443 }; 1444 1445 vpu_blk_ctrl: blk-ctrl@38330000 { 1446 compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; 1447 reg = <0x38330000 0x100>; 1448 power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, 1449 <&pgc_vpu_g2>, <&pgc_vpu_h1>; 1450 power-domain-names = "bus", "g1", "g2", "h1"; 1451 clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, 1452 <&clk IMX8MM_CLK_VPU_G2_ROOT>, 1453 <&clk IMX8MM_CLK_VPU_H1_ROOT>; 1454 clock-names = "g1", "g2", "h1"; 1455 assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>, 1456 <&clk IMX8MM_CLK_VPU_G2>; 1457 assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>, 1458 <&clk IMX8MM_VPU_PLL_OUT>; 1459 assigned-clock-rates = <600000000>, 1460 <600000000>; 1461 #power-domain-cells = <1>; 1462 }; 1463 1464 gic: interrupt-controller@38800000 { 1465 compatible = "arm,gic-v3"; 1466 reg = <0x38800000 0x10000>, /* GIC Dist */ 1467 <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ 1468 #interrupt-cells = <3>; 1469 interrupt-controller; 1470 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 1471 }; 1472 1473 ddrc: memory-controller@3d400000 { 1474 compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; 1475 reg = <0x3d400000 0x400000>; 1476 clock-names = "core", "pll", "alt", "apb"; 1477 clocks = <&clk IMX8MM_CLK_DRAM_CORE>, 1478 <&clk IMX8MM_DRAM_PLL>, 1479 <&clk IMX8MM_CLK_DRAM_ALT>, 1480 <&clk IMX8MM_CLK_DRAM_APB>; 1481 }; 1482 1483 ddr-pmu@3d800000 { 1484 compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; 1485 reg = <0x3d800000 0x400000>; 1486 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; 1487 }; 1488 }; 1489}; 1490