1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mm-clock.h>
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/input/input.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/power/imx8mm-power.h>
11#include <dt-bindings/reset/imx8mq-reset.h>
12#include <dt-bindings/thermal/thermal.h>
13
14#include "imx8mm-pinfunc.h"
15
16/ {
17	interrupt-parent = <&gic>;
18	#address-cells = <2>;
19	#size-cells = <2>;
20
21	aliases {
22		ethernet0 = &fec1;
23		gpio0 = &gpio1;
24		gpio1 = &gpio2;
25		gpio2 = &gpio3;
26		gpio3 = &gpio4;
27		gpio4 = &gpio5;
28		i2c0 = &i2c1;
29		i2c1 = &i2c2;
30		i2c2 = &i2c3;
31		i2c3 = &i2c4;
32		mmc0 = &usdhc1;
33		mmc1 = &usdhc2;
34		mmc2 = &usdhc3;
35		serial0 = &uart1;
36		serial1 = &uart2;
37		serial2 = &uart3;
38		serial3 = &uart4;
39		spi0 = &ecspi1;
40		spi1 = &ecspi2;
41		spi2 = &ecspi3;
42	};
43
44	cpus {
45		#address-cells = <1>;
46		#size-cells = <0>;
47
48		idle-states {
49			entry-method = "psci";
50
51			cpu_pd_wait: cpu-pd-wait {
52				compatible = "arm,idle-state";
53				arm,psci-suspend-param = <0x0010033>;
54				local-timer-stop;
55				entry-latency-us = <1000>;
56				exit-latency-us = <700>;
57				min-residency-us = <2700>;
58			};
59		};
60
61		A53_0: cpu@0 {
62			device_type = "cpu";
63			compatible = "arm,cortex-a53";
64			reg = <0x0>;
65			clock-latency = <61036>; /* two CLK32 periods */
66			clocks = <&clk IMX8MM_CLK_ARM>;
67			enable-method = "psci";
68			i-cache-size = <0x8000>;
69			i-cache-line-size = <64>;
70			i-cache-sets = <256>;
71			d-cache-size = <0x8000>;
72			d-cache-line-size = <64>;
73			d-cache-sets = <128>;
74			next-level-cache = <&A53_L2>;
75			operating-points-v2 = <&a53_opp_table>;
76			nvmem-cells = <&cpu_speed_grade>;
77			nvmem-cell-names = "speed_grade";
78			cpu-idle-states = <&cpu_pd_wait>;
79			#cooling-cells = <2>;
80		};
81
82		A53_1: cpu@1 {
83			device_type = "cpu";
84			compatible = "arm,cortex-a53";
85			reg = <0x1>;
86			clock-latency = <61036>; /* two CLK32 periods */
87			clocks = <&clk IMX8MM_CLK_ARM>;
88			enable-method = "psci";
89			i-cache-size = <0x8000>;
90			i-cache-line-size = <64>;
91			i-cache-sets = <256>;
92			d-cache-size = <0x8000>;
93			d-cache-line-size = <64>;
94			d-cache-sets = <128>;
95			next-level-cache = <&A53_L2>;
96			operating-points-v2 = <&a53_opp_table>;
97			cpu-idle-states = <&cpu_pd_wait>;
98			#cooling-cells = <2>;
99		};
100
101		A53_2: cpu@2 {
102			device_type = "cpu";
103			compatible = "arm,cortex-a53";
104			reg = <0x2>;
105			clock-latency = <61036>; /* two CLK32 periods */
106			clocks = <&clk IMX8MM_CLK_ARM>;
107			enable-method = "psci";
108			i-cache-size = <0x8000>;
109			i-cache-line-size = <64>;
110			i-cache-sets = <256>;
111			d-cache-size = <0x8000>;
112			d-cache-line-size = <64>;
113			d-cache-sets = <128>;
114			next-level-cache = <&A53_L2>;
115			operating-points-v2 = <&a53_opp_table>;
116			cpu-idle-states = <&cpu_pd_wait>;
117			#cooling-cells = <2>;
118		};
119
120		A53_3: cpu@3 {
121			device_type = "cpu";
122			compatible = "arm,cortex-a53";
123			reg = <0x3>;
124			clock-latency = <61036>; /* two CLK32 periods */
125			clocks = <&clk IMX8MM_CLK_ARM>;
126			enable-method = "psci";
127			i-cache-size = <0x8000>;
128			i-cache-line-size = <64>;
129			i-cache-sets = <256>;
130			d-cache-size = <0x8000>;
131			d-cache-line-size = <64>;
132			d-cache-sets = <128>;
133			next-level-cache = <&A53_L2>;
134			operating-points-v2 = <&a53_opp_table>;
135			cpu-idle-states = <&cpu_pd_wait>;
136			#cooling-cells = <2>;
137		};
138
139		A53_L2: l2-cache0 {
140			compatible = "cache";
141			cache-level = <2>;
142			cache-unified;
143			cache-size = <0x80000>;
144			cache-line-size = <64>;
145			cache-sets = <512>;
146		};
147	};
148
149	a53_opp_table: opp-table {
150		compatible = "operating-points-v2";
151		opp-shared;
152
153		opp-1200000000 {
154			opp-hz = /bits/ 64 <1200000000>;
155			opp-microvolt = <850000>;
156			opp-supported-hw = <0xe>, <0x7>;
157			clock-latency-ns = <150000>;
158			opp-suspend;
159		};
160
161		opp-1600000000 {
162			opp-hz = /bits/ 64 <1600000000>;
163			opp-microvolt = <950000>;
164			opp-supported-hw = <0xc>, <0x7>;
165			clock-latency-ns = <150000>;
166			opp-suspend;
167		};
168
169		opp-1800000000 {
170			opp-hz = /bits/ 64 <1800000000>;
171			opp-microvolt = <1000000>;
172			opp-supported-hw = <0x8>, <0x3>;
173			clock-latency-ns = <150000>;
174			opp-suspend;
175		};
176	};
177
178	osc_32k: clock-osc-32k {
179		compatible = "fixed-clock";
180		#clock-cells = <0>;
181		clock-frequency = <32768>;
182		clock-output-names = "osc_32k";
183	};
184
185	osc_24m: clock-osc-24m {
186		compatible = "fixed-clock";
187		#clock-cells = <0>;
188		clock-frequency = <24000000>;
189		clock-output-names = "osc_24m";
190	};
191
192	clk_ext1: clock-ext1 {
193		compatible = "fixed-clock";
194		#clock-cells = <0>;
195		clock-frequency = <133000000>;
196		clock-output-names = "clk_ext1";
197	};
198
199	clk_ext2: clock-ext2 {
200		compatible = "fixed-clock";
201		#clock-cells = <0>;
202		clock-frequency = <133000000>;
203		clock-output-names = "clk_ext2";
204	};
205
206	clk_ext3: clock-ext3 {
207		compatible = "fixed-clock";
208		#clock-cells = <0>;
209		clock-frequency = <133000000>;
210		clock-output-names = "clk_ext3";
211	};
212
213	clk_ext4: clock-ext4 {
214		compatible = "fixed-clock";
215		#clock-cells = <0>;
216		clock-frequency = <133000000>;
217		clock-output-names = "clk_ext4";
218	};
219
220	psci {
221		compatible = "arm,psci-1.0";
222		method = "smc";
223	};
224
225	pmu {
226		compatible = "arm,cortex-a53-pmu";
227		interrupts = <GIC_PPI 7
228			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
229	};
230
231	timer {
232		compatible = "arm,armv8-timer";
233		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
234			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
235			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
236			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
237		clock-frequency = <8000000>;
238		arm,no-tick-in-suspend;
239	};
240
241	thermal-zones {
242		cpu-thermal {
243			polling-delay-passive = <250>;
244			polling-delay = <2000>;
245			thermal-sensors = <&tmu>;
246			trips {
247				cpu_alert0: trip0 {
248					temperature = <85000>;
249					hysteresis = <2000>;
250					type = "passive";
251				};
252
253				cpu_crit0: trip1 {
254					temperature = <95000>;
255					hysteresis = <2000>;
256					type = "critical";
257				};
258			};
259
260			cooling-maps {
261				map0 {
262					trip = <&cpu_alert0>;
263					cooling-device =
264						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
265						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
266						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
267						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
268				};
269			};
270		};
271	};
272
273	usbphynop1: usbphynop1 {
274		#phy-cells = <0>;
275		compatible = "usb-nop-xceiv";
276		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
277		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
278		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
279		clock-names = "main_clk";
280		power-domains = <&pgc_otg1>;
281	};
282
283	usbphynop2: usbphynop2 {
284		#phy-cells = <0>;
285		compatible = "usb-nop-xceiv";
286		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
287		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
288		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
289		clock-names = "main_clk";
290		power-domains = <&pgc_otg2>;
291	};
292
293	soc: soc@0 {
294		compatible = "fsl,imx8mm-soc", "simple-bus";
295		#address-cells = <1>;
296		#size-cells = <1>;
297		ranges = <0x0 0x0 0x0 0x3e000000>;
298		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
299		nvmem-cells = <&imx8mm_uid>;
300		nvmem-cell-names = "soc_unique_id";
301
302		aips1: bus@30000000 {
303			compatible = "fsl,aips-bus", "simple-bus";
304			reg = <0x30000000 0x400000>;
305			#address-cells = <1>;
306			#size-cells = <1>;
307			ranges = <0x30000000 0x30000000 0x400000>;
308
309			spba2: spba-bus@30000000 {
310				compatible = "fsl,spba-bus", "simple-bus";
311				#address-cells = <1>;
312				#size-cells = <1>;
313				reg = <0x30000000 0x100000>;
314				ranges;
315
316				sai1: sai@30010000 {
317					#sound-dai-cells = <0>;
318					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
319					reg = <0x30010000 0x10000>;
320					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
321					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
322						 <&clk IMX8MM_CLK_SAI1_ROOT>,
323						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
324					clock-names = "bus", "mclk1", "mclk2", "mclk3";
325					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
326					dma-names = "rx", "tx";
327					status = "disabled";
328				};
329
330				sai2: sai@30020000 {
331					#sound-dai-cells = <0>;
332					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
333					reg = <0x30020000 0x10000>;
334					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
335					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
336						<&clk IMX8MM_CLK_SAI2_ROOT>,
337						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
338					clock-names = "bus", "mclk1", "mclk2", "mclk3";
339					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
340					dma-names = "rx", "tx";
341					status = "disabled";
342				};
343
344				sai3: sai@30030000 {
345					#sound-dai-cells = <0>;
346					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
347					reg = <0x30030000 0x10000>;
348					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
349					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
350						 <&clk IMX8MM_CLK_SAI3_ROOT>,
351						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
352					clock-names = "bus", "mclk1", "mclk2", "mclk3";
353					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
354					dma-names = "rx", "tx";
355					status = "disabled";
356				};
357
358				sai5: sai@30050000 {
359					#sound-dai-cells = <0>;
360					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
361					reg = <0x30050000 0x10000>;
362					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
363					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
364						 <&clk IMX8MM_CLK_SAI5_ROOT>,
365						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
366					clock-names = "bus", "mclk1", "mclk2", "mclk3";
367					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
368					dma-names = "rx", "tx";
369					status = "disabled";
370				};
371
372				sai6: sai@30060000 {
373					#sound-dai-cells = <0>;
374					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
375					reg = <0x30060000 0x10000>;
376					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
377					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
378						 <&clk IMX8MM_CLK_SAI6_ROOT>,
379						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
380					clock-names = "bus", "mclk1", "mclk2", "mclk3";
381					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
382					dma-names = "rx", "tx";
383					status = "disabled";
384				};
385
386				micfil: audio-controller@30080000 {
387					compatible = "fsl,imx8mm-micfil";
388					reg = <0x30080000 0x10000>;
389					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
390						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
391						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
392						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
393					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
394						 <&clk IMX8MM_CLK_PDM_ROOT>,
395						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
396						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
397						 <&clk IMX8MM_CLK_EXT3>;
398					clock-names = "ipg_clk", "ipg_clk_app",
399						      "pll8k", "pll11k", "clkext3";
400					dmas = <&sdma2 24 25 0x80000000>;
401					dma-names = "rx";
402					status = "disabled";
403				};
404
405				spdif1: spdif@30090000 {
406					compatible = "fsl,imx35-spdif";
407					reg = <0x30090000 0x10000>;
408					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
409					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
410						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
411						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
412						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
413						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
414						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
415						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
416						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
417						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
418						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
419					clock-names = "core", "rxtx0",
420						      "rxtx1", "rxtx2",
421						      "rxtx3", "rxtx4",
422						      "rxtx5", "rxtx6",
423						      "rxtx7", "spba";
424					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
425					dma-names = "rx", "tx";
426					status = "disabled";
427				};
428			};
429
430			gpio1: gpio@30200000 {
431				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
432				reg = <0x30200000 0x10000>;
433				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
434					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
435				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
436				gpio-controller;
437				#gpio-cells = <2>;
438				interrupt-controller;
439				#interrupt-cells = <2>;
440				gpio-ranges = <&iomuxc 0 10 30>;
441			};
442
443			gpio2: gpio@30210000 {
444				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
445				reg = <0x30210000 0x10000>;
446				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
447					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
448				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
449				gpio-controller;
450				#gpio-cells = <2>;
451				interrupt-controller;
452				#interrupt-cells = <2>;
453				gpio-ranges = <&iomuxc 0 40 21>;
454			};
455
456			gpio3: gpio@30220000 {
457				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
458				reg = <0x30220000 0x10000>;
459				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
460					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
461				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
462				gpio-controller;
463				#gpio-cells = <2>;
464				interrupt-controller;
465				#interrupt-cells = <2>;
466				gpio-ranges = <&iomuxc 0 61 26>;
467			};
468
469			gpio4: gpio@30230000 {
470				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
471				reg = <0x30230000 0x10000>;
472				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
473					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
474				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
475				gpio-controller;
476				#gpio-cells = <2>;
477				interrupt-controller;
478				#interrupt-cells = <2>;
479				gpio-ranges = <&iomuxc 0 87 32>;
480			};
481
482			gpio5: gpio@30240000 {
483				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
484				reg = <0x30240000 0x10000>;
485				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
486					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
487				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
488				gpio-controller;
489				#gpio-cells = <2>;
490				interrupt-controller;
491				#interrupt-cells = <2>;
492				gpio-ranges = <&iomuxc 0 119 30>;
493			};
494
495			tmu: tmu@30260000 {
496				compatible = "fsl,imx8mm-tmu";
497				reg = <0x30260000 0x10000>;
498				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
499				nvmem-cells = <&tmu_calib>;
500				nvmem-cell-names = "calib";
501				#thermal-sensor-cells = <0>;
502			};
503
504			wdog1: watchdog@30280000 {
505				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
506				reg = <0x30280000 0x10000>;
507				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
508				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
509				status = "disabled";
510			};
511
512			wdog2: watchdog@30290000 {
513				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
514				reg = <0x30290000 0x10000>;
515				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
516				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
517				status = "disabled";
518			};
519
520			wdog3: watchdog@302a0000 {
521				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
522				reg = <0x302a0000 0x10000>;
523				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
524				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
525				status = "disabled";
526			};
527
528			sdma2: dma-controller@302c0000 {
529				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
530				reg = <0x302c0000 0x10000>;
531				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
532				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
533					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
534				clock-names = "ipg", "ahb";
535				#dma-cells = <3>;
536				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
537			};
538
539			sdma3: dma-controller@302b0000 {
540				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
541				reg = <0x302b0000 0x10000>;
542				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
543				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
544				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
545				clock-names = "ipg", "ahb";
546				#dma-cells = <3>;
547				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
548			};
549
550			iomuxc: pinctrl@30330000 {
551				compatible = "fsl,imx8mm-iomuxc";
552				reg = <0x30330000 0x10000>;
553			};
554
555			gpr: syscon@30340000 {
556				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
557				reg = <0x30340000 0x10000>;
558			};
559
560			ocotp: efuse@30350000 {
561				compatible = "fsl,imx8mm-ocotp", "syscon";
562				reg = <0x30350000 0x10000>;
563				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
564				/* For nvmem subnodes */
565				#address-cells = <1>;
566				#size-cells = <1>;
567
568				/*
569				 * The register address below maps to the MX8M
570				 * Fusemap Description Table entries this way.
571				 * Assuming
572				 *   reg = <ADDR SIZE>;
573				 * then
574				 *   Fuse Address = (ADDR * 4) + 0x400
575				 * Note that if SIZE is greater than 4, then
576				 * each subsequent fuse is located at offset
577				 * +0x10 in Fusemap Description Table (e.g.
578				 * reg = <0x4 0x8> describes fuses 0x410 and
579				 * 0x420).
580				 */
581				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
582					reg = <0x4 0x8>;
583				};
584
585				cpu_speed_grade: speed-grade@10 { /* 0x440 */
586					reg = <0x10 4>;
587				};
588
589				tmu_calib: calib@3c { /* 0x4f0 */
590					reg = <0x3c 4>;
591				};
592
593				fec_mac_address: mac-address@90 { /* 0x640 */
594					reg = <0x90 6>;
595				};
596			};
597
598			anatop: clock-controller@30360000 {
599				compatible = "fsl,imx8mm-anatop";
600				reg = <0x30360000 0x10000>;
601				#clock-cells = <1>;
602			};
603
604			snvs: snvs@30370000 {
605				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
606				reg = <0x30370000 0x10000>;
607
608				snvs_rtc: snvs-rtc-lp {
609					compatible = "fsl,sec-v4.0-mon-rtc-lp";
610					regmap = <&snvs>;
611					offset = <0x34>;
612					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
613						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
614					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
615					clock-names = "snvs-rtc";
616				};
617
618				snvs_pwrkey: snvs-powerkey {
619					compatible = "fsl,sec-v4.0-pwrkey";
620					regmap = <&snvs>;
621					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
622					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
623					clock-names = "snvs-pwrkey";
624					linux,keycode = <KEY_POWER>;
625					wakeup-source;
626					status = "disabled";
627				};
628
629				snvs_lpgpr: snvs-lpgpr {
630					compatible = "fsl,imx8mm-snvs-lpgpr",
631						     "fsl,imx7d-snvs-lpgpr";
632				};
633			};
634
635			clk: clock-controller@30380000 {
636				compatible = "fsl,imx8mm-ccm";
637				reg = <0x30380000 0x10000>;
638				#clock-cells = <1>;
639				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
640					 <&clk_ext3>, <&clk_ext4>;
641				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
642					      "clk_ext3", "clk_ext4";
643				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
644						<&clk IMX8MM_CLK_A53_CORE>,
645						<&clk IMX8MM_CLK_NOC>,
646						<&clk IMX8MM_CLK_AUDIO_AHB>,
647						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
648						<&clk IMX8MM_SYS_PLL3>,
649						<&clk IMX8MM_VIDEO_PLL1>,
650						<&clk IMX8MM_AUDIO_PLL1>;
651				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
652							 <&clk IMX8MM_ARM_PLL_OUT>,
653							 <&clk IMX8MM_SYS_PLL3_OUT>,
654							 <&clk IMX8MM_SYS_PLL1_800M>;
655				assigned-clock-rates = <0>, <0>, <0>,
656							<400000000>,
657							<400000000>,
658							<750000000>,
659							<594000000>,
660							<393216000>;
661			};
662
663			src: reset-controller@30390000 {
664				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
665				reg = <0x30390000 0x10000>;
666				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
667				#reset-cells = <1>;
668			};
669
670			gpc: gpc@303a0000 {
671				compatible = "fsl,imx8mm-gpc";
672				reg = <0x303a0000 0x10000>;
673				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
674				interrupt-parent = <&gic>;
675				interrupt-controller;
676				#interrupt-cells = <3>;
677
678				pgc {
679					#address-cells = <1>;
680					#size-cells = <0>;
681
682					pgc_hsiomix: power-domain@0 {
683						#power-domain-cells = <0>;
684						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
685						clocks = <&clk IMX8MM_CLK_USB_BUS>;
686						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
687						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
688					};
689
690					pgc_pcie: power-domain@1 {
691						#power-domain-cells = <0>;
692						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
693						power-domains = <&pgc_hsiomix>;
694						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
695					};
696
697					pgc_otg1: power-domain@2 {
698						#power-domain-cells = <0>;
699						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
700					};
701
702					pgc_otg2: power-domain@3 {
703						#power-domain-cells = <0>;
704						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
705					};
706
707					pgc_gpumix: power-domain@4 {
708						#power-domain-cells = <0>;
709						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
710						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
711							 <&clk IMX8MM_CLK_GPU_AHB>;
712						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
713								  <&clk IMX8MM_CLK_GPU_AHB>;
714						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
715									 <&clk IMX8MM_SYS_PLL1_800M>;
716						assigned-clock-rates = <800000000>, <400000000>;
717					};
718
719					pgc_gpu: power-domain@5 {
720						#power-domain-cells = <0>;
721						reg = <IMX8MM_POWER_DOMAIN_GPU>;
722						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
723							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
724							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
725							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
726						resets = <&src IMX8MQ_RESET_GPU_RESET>;
727						power-domains = <&pgc_gpumix>;
728					};
729
730					pgc_vpumix: power-domain@6 {
731						#power-domain-cells = <0>;
732						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
733						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
734						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
735						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
736					};
737
738					pgc_vpu_g1: power-domain@7 {
739						#power-domain-cells = <0>;
740						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
741					};
742
743					pgc_vpu_g2: power-domain@8 {
744						#power-domain-cells = <0>;
745						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
746					};
747
748					pgc_vpu_h1: power-domain@9 {
749						#power-domain-cells = <0>;
750						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
751					};
752
753					pgc_dispmix: power-domain@10 {
754						#power-domain-cells = <0>;
755						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
756						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
757							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
758						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
759								  <&clk IMX8MM_CLK_DISP_APB>;
760						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
761									 <&clk IMX8MM_SYS_PLL1_800M>;
762						assigned-clock-rates = <500000000>, <200000000>;
763					};
764
765					pgc_mipi: power-domain@11 {
766						#power-domain-cells = <0>;
767						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
768					};
769				};
770			};
771		};
772
773		aips2: bus@30400000 {
774			compatible = "fsl,aips-bus", "simple-bus";
775			reg = <0x30400000 0x400000>;
776			#address-cells = <1>;
777			#size-cells = <1>;
778			ranges = <0x30400000 0x30400000 0x400000>;
779
780			pwm1: pwm@30660000 {
781				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
782				reg = <0x30660000 0x10000>;
783				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
784				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
785					<&clk IMX8MM_CLK_PWM1_ROOT>;
786				clock-names = "ipg", "per";
787				#pwm-cells = <3>;
788				status = "disabled";
789			};
790
791			pwm2: pwm@30670000 {
792				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
793				reg = <0x30670000 0x10000>;
794				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
795				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
796					 <&clk IMX8MM_CLK_PWM2_ROOT>;
797				clock-names = "ipg", "per";
798				#pwm-cells = <3>;
799				status = "disabled";
800			};
801
802			pwm3: pwm@30680000 {
803				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
804				reg = <0x30680000 0x10000>;
805				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
806				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
807					 <&clk IMX8MM_CLK_PWM3_ROOT>;
808				clock-names = "ipg", "per";
809				#pwm-cells = <3>;
810				status = "disabled";
811			};
812
813			pwm4: pwm@30690000 {
814				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
815				reg = <0x30690000 0x10000>;
816				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
817				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
818					 <&clk IMX8MM_CLK_PWM4_ROOT>;
819				clock-names = "ipg", "per";
820				#pwm-cells = <3>;
821				status = "disabled";
822			};
823
824			system_counter: timer@306a0000 {
825				compatible = "nxp,sysctr-timer";
826				reg = <0x306a0000 0x20000>;
827				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
828				clocks = <&osc_24m>;
829				clock-names = "per";
830			};
831		};
832
833		aips3: bus@30800000 {
834			compatible = "fsl,aips-bus", "simple-bus";
835			reg = <0x30800000 0x400000>;
836			#address-cells = <1>;
837			#size-cells = <1>;
838			ranges = <0x30800000 0x30800000 0x400000>,
839				 <0x8000000 0x8000000 0x10000000>;
840
841			spba1: spba-bus@30800000 {
842				compatible = "fsl,spba-bus", "simple-bus";
843				#address-cells = <1>;
844				#size-cells = <1>;
845				reg = <0x30800000 0x100000>;
846				ranges;
847
848				ecspi1: spi@30820000 {
849					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
850					#address-cells = <1>;
851					#size-cells = <0>;
852					reg = <0x30820000 0x10000>;
853					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
854					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
855						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
856					clock-names = "ipg", "per";
857					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
858					dma-names = "rx", "tx";
859					status = "disabled";
860				};
861
862				ecspi2: spi@30830000 {
863					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
864					#address-cells = <1>;
865					#size-cells = <0>;
866					reg = <0x30830000 0x10000>;
867					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
868					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
869						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
870					clock-names = "ipg", "per";
871					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
872					dma-names = "rx", "tx";
873					status = "disabled";
874				};
875
876				ecspi3: spi@30840000 {
877					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
878					#address-cells = <1>;
879					#size-cells = <0>;
880					reg = <0x30840000 0x10000>;
881					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
882					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
883						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
884					clock-names = "ipg", "per";
885					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
886					dma-names = "rx", "tx";
887					status = "disabled";
888				};
889
890				uart1: serial@30860000 {
891					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
892					reg = <0x30860000 0x10000>;
893					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
894					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
895						 <&clk IMX8MM_CLK_UART1_ROOT>;
896					clock-names = "ipg", "per";
897					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
898					dma-names = "rx", "tx";
899					status = "disabled";
900				};
901
902				uart3: serial@30880000 {
903					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
904					reg = <0x30880000 0x10000>;
905					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
906					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
907						 <&clk IMX8MM_CLK_UART3_ROOT>;
908					clock-names = "ipg", "per";
909					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
910					dma-names = "rx", "tx";
911					status = "disabled";
912				};
913
914				uart2: serial@30890000 {
915					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
916					reg = <0x30890000 0x10000>;
917					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
918					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
919						 <&clk IMX8MM_CLK_UART2_ROOT>;
920					clock-names = "ipg", "per";
921					status = "disabled";
922				};
923			};
924
925			crypto: crypto@30900000 {
926				compatible = "fsl,sec-v4.0";
927				#address-cells = <1>;
928				#size-cells = <1>;
929				reg = <0x30900000 0x40000>;
930				ranges = <0 0x30900000 0x40000>;
931				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
932				clocks = <&clk IMX8MM_CLK_AHB>,
933					 <&clk IMX8MM_CLK_IPG_ROOT>;
934				clock-names = "aclk", "ipg";
935
936				sec_jr0: jr@1000 {
937					compatible = "fsl,sec-v4.0-job-ring";
938					reg = <0x1000 0x1000>;
939					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
940					status = "disabled";
941				};
942
943				sec_jr1: jr@2000 {
944					compatible = "fsl,sec-v4.0-job-ring";
945					reg = <0x2000 0x1000>;
946					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
947				};
948
949				sec_jr2: jr@3000 {
950					compatible = "fsl,sec-v4.0-job-ring";
951					reg = <0x3000 0x1000>;
952					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
953				};
954			};
955
956			i2c1: i2c@30a20000 {
957				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
958				#address-cells = <1>;
959				#size-cells = <0>;
960				reg = <0x30a20000 0x10000>;
961				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
962				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
963				status = "disabled";
964			};
965
966			i2c2: i2c@30a30000 {
967				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
968				#address-cells = <1>;
969				#size-cells = <0>;
970				reg = <0x30a30000 0x10000>;
971				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
972				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
973				status = "disabled";
974			};
975
976			i2c3: i2c@30a40000 {
977				#address-cells = <1>;
978				#size-cells = <0>;
979				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
980				reg = <0x30a40000 0x10000>;
981				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
982				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
983				status = "disabled";
984			};
985
986			i2c4: i2c@30a50000 {
987				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
988				#address-cells = <1>;
989				#size-cells = <0>;
990				reg = <0x30a50000 0x10000>;
991				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
992				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
993				status = "disabled";
994			};
995
996			uart4: serial@30a60000 {
997				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
998				reg = <0x30a60000 0x10000>;
999				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1000				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
1001					 <&clk IMX8MM_CLK_UART4_ROOT>;
1002				clock-names = "ipg", "per";
1003				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
1004				dma-names = "rx", "tx";
1005				status = "disabled";
1006			};
1007
1008			mu: mailbox@30aa0000 {
1009				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
1010				reg = <0x30aa0000 0x10000>;
1011				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
1012				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
1013				#mbox-cells = <2>;
1014			};
1015
1016			usdhc1: mmc@30b40000 {
1017				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1018				reg = <0x30b40000 0x10000>;
1019				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
1020				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1021					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1022					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
1023				clock-names = "ipg", "ahb", "per";
1024				fsl,tuning-start-tap = <20>;
1025				fsl,tuning-step = <2>;
1026				bus-width = <4>;
1027				status = "disabled";
1028			};
1029
1030			usdhc2: mmc@30b50000 {
1031				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1032				reg = <0x30b50000 0x10000>;
1033				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1034				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1035					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1036					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
1037				clock-names = "ipg", "ahb", "per";
1038				fsl,tuning-start-tap = <20>;
1039				fsl,tuning-step = <2>;
1040				bus-width = <4>;
1041				status = "disabled";
1042			};
1043
1044			usdhc3: mmc@30b60000 {
1045				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
1046				reg = <0x30b60000 0x10000>;
1047				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
1048				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
1049					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
1050					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
1051				clock-names = "ipg", "ahb", "per";
1052				fsl,tuning-start-tap = <20>;
1053				fsl,tuning-step = <2>;
1054				bus-width = <4>;
1055				status = "disabled";
1056			};
1057
1058			flexspi: spi@30bb0000 {
1059				#address-cells = <1>;
1060				#size-cells = <0>;
1061				compatible = "nxp,imx8mm-fspi";
1062				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
1063				reg-names = "fspi_base", "fspi_mmap";
1064				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1065				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
1066					 <&clk IMX8MM_CLK_QSPI_ROOT>;
1067				clock-names = "fspi_en", "fspi";
1068				status = "disabled";
1069			};
1070
1071			sdma1: dma-controller@30bd0000 {
1072				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
1073				reg = <0x30bd0000 0x10000>;
1074				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
1075				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
1076					 <&clk IMX8MM_CLK_AHB>;
1077				clock-names = "ipg", "ahb";
1078				#dma-cells = <3>;
1079				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
1080			};
1081
1082			fec1: ethernet@30be0000 {
1083				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
1084				reg = <0x30be0000 0x10000>;
1085				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1086					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1087					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1088					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1089				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
1090					 <&clk IMX8MM_CLK_ENET1_ROOT>,
1091					 <&clk IMX8MM_CLK_ENET_TIMER>,
1092					 <&clk IMX8MM_CLK_ENET_REF>,
1093					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
1094				clock-names = "ipg", "ahb", "ptp",
1095					      "enet_clk_ref", "enet_out";
1096				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
1097						  <&clk IMX8MM_CLK_ENET_TIMER>,
1098						  <&clk IMX8MM_CLK_ENET_REF>,
1099						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
1100				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
1101							 <&clk IMX8MM_SYS_PLL2_100M>,
1102							 <&clk IMX8MM_SYS_PLL2_125M>,
1103							 <&clk IMX8MM_SYS_PLL2_50M>;
1104				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
1105				fsl,num-tx-queues = <3>;
1106				fsl,num-rx-queues = <3>;
1107				nvmem-cells = <&fec_mac_address>;
1108				nvmem-cell-names = "mac-address";
1109				fsl,stop-mode = <&gpr 0x10 3>;
1110				status = "disabled";
1111			};
1112
1113		};
1114
1115		aips4: bus@32c00000 {
1116			compatible = "fsl,aips-bus", "simple-bus";
1117			reg = <0x32c00000 0x400000>;
1118			#address-cells = <1>;
1119			#size-cells = <1>;
1120			ranges = <0x32c00000 0x32c00000 0x400000>;
1121
1122			csi: csi@32e20000 {
1123				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
1124				reg = <0x32e20000 0x1000>;
1125				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
1126				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
1127				clock-names = "mclk";
1128				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
1129				status = "disabled";
1130
1131				port {
1132					csi_in: endpoint {
1133						remote-endpoint = <&imx8mm_mipi_csi_out>;
1134					};
1135				};
1136			};
1137
1138			disp_blk_ctrl: blk-ctrl@32e28000 {
1139				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
1140				reg = <0x32e28000 0x100>;
1141				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
1142						<&pgc_dispmix>, <&pgc_mipi>,
1143						<&pgc_mipi>;
1144				power-domain-names = "bus", "csi-bridge",
1145						     "lcdif", "mipi-dsi",
1146						     "mipi-csi";
1147				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1148					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1149					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1150					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
1151					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1152					 <&clk IMX8MM_CLK_DISP_ROOT>,
1153					 <&clk IMX8MM_CLK_DSI_CORE>,
1154					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
1155					 <&clk IMX8MM_CLK_CSI1_CORE>,
1156					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1157				clock-names = "csi-bridge-axi","csi-bridge-apb",
1158					      "csi-bridge-core", "lcdif-axi",
1159					      "lcdif-apb", "lcdif-pix",
1160					      "dsi-pclk", "dsi-ref",
1161					      "csi-aclk", "csi-pclk";
1162				#power-domain-cells = <1>;
1163			};
1164
1165			mipi_csi: mipi-csi@32e30000 {
1166				compatible = "fsl,imx8mm-mipi-csi2";
1167				reg = <0x32e30000 0x1000>;
1168				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1169				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
1170						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
1171				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
1172							  <&clk IMX8MM_SYS_PLL2_1000M>;
1173				clock-frequency = <333000000>;
1174				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
1175					 <&clk IMX8MM_CLK_CSI1_ROOT>,
1176					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
1177					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
1178				clock-names = "pclk", "wrap", "phy", "axi";
1179				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
1180				status = "disabled";
1181
1182				ports {
1183					#address-cells = <1>;
1184					#size-cells = <0>;
1185
1186					port@0 {
1187						reg = <0>;
1188					};
1189
1190					port@1 {
1191						reg = <1>;
1192
1193						imx8mm_mipi_csi_out: endpoint {
1194							remote-endpoint = <&csi_in>;
1195						};
1196					};
1197				};
1198			};
1199
1200			usbotg1: usb@32e40000 {
1201				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1202				reg = <0x32e40000 0x200>;
1203				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1204				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1205				clock-names = "usb1_ctrl_root_clk";
1206				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1207				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1208				phys = <&usbphynop1>;
1209				fsl,usbmisc = <&usbmisc1 0>;
1210				power-domains = <&pgc_hsiomix>;
1211				status = "disabled";
1212			};
1213
1214			usbmisc1: usbmisc@32e40200 {
1215				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1216				#index-cells = <1>;
1217				reg = <0x32e40200 0x200>;
1218			};
1219
1220			usbotg2: usb@32e50000 {
1221				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1222				reg = <0x32e50000 0x200>;
1223				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1224				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1225				clock-names = "usb1_ctrl_root_clk";
1226				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1227				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
1228				phys = <&usbphynop2>;
1229				fsl,usbmisc = <&usbmisc2 0>;
1230				power-domains = <&pgc_hsiomix>;
1231				status = "disabled";
1232			};
1233
1234			usbmisc2: usbmisc@32e50200 {
1235				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1236				#index-cells = <1>;
1237				reg = <0x32e50200 0x200>;
1238			};
1239
1240			pcie_phy: pcie-phy@32f00000 {
1241				compatible = "fsl,imx8mm-pcie-phy";
1242				reg = <0x32f00000 0x10000>;
1243				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1244				clock-names = "ref";
1245				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
1246				assigned-clock-rates = <100000000>;
1247				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
1248				resets = <&src IMX8MQ_RESET_PCIEPHY>;
1249				reset-names = "pciephy";
1250				#phy-cells = <0>;
1251				status = "disabled";
1252			};
1253		};
1254
1255		dma_apbh: dma-controller@33000000 {
1256			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1257			reg = <0x33000000 0x2000>;
1258			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1259				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1260				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1261				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1262			#dma-cells = <1>;
1263			dma-channels = <4>;
1264			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1265		};
1266
1267		gpmi: nand-controller@33002000 {
1268			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1269			#address-cells = <1>;
1270			#size-cells = <0>;
1271			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1272			reg-names = "gpmi-nand", "bch";
1273			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1274			interrupt-names = "bch";
1275			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1276				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1277			clock-names = "gpmi_io", "gpmi_bch_apb";
1278			dmas = <&dma_apbh 0>;
1279			dma-names = "rx-tx";
1280			status = "disabled";
1281		};
1282
1283		pcie0: pcie@33800000 {
1284			compatible = "fsl,imx8mm-pcie";
1285			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
1286			reg-names = "dbi", "config";
1287			#address-cells = <3>;
1288			#size-cells = <2>;
1289			device_type = "pci";
1290			bus-range = <0x00 0xff>;
1291			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
1292				   0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
1293			num-lanes = <1>;
1294			num-viewport = <4>;
1295			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1296			interrupt-names = "msi";
1297			#interrupt-cells = <1>;
1298			interrupt-map-mask = <0 0 0 0x7>;
1299			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1300					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1301					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1302					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1303			fsl,max-link-speed = <2>;
1304			linux,pci-domain = <0>;
1305			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
1306				 <&clk IMX8MM_CLK_PCIE1_PHY>,
1307				 <&clk IMX8MM_CLK_PCIE1_AUX>;
1308			clock-names = "pcie", "pcie_bus", "pcie_aux";
1309			power-domains = <&pgc_pcie>;
1310			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
1311				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
1312			reset-names = "apps", "turnoff";
1313			phys = <&pcie_phy>;
1314			phy-names = "pcie-phy";
1315			status = "disabled";
1316		};
1317
1318		gpu_3d: gpu@38000000 {
1319			compatible = "vivante,gc";
1320			reg = <0x38000000 0x8000>;
1321			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
1322			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1323				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1324				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
1325				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
1326			clock-names = "reg", "bus", "core", "shader";
1327			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
1328					  <&clk IMX8MM_GPU_PLL_OUT>;
1329			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1330			assigned-clock-rates = <0>, <1000000000>;
1331			power-domains = <&pgc_gpu>;
1332		};
1333
1334		gpu_2d: gpu@38008000 {
1335			compatible = "vivante,gc";
1336			reg = <0x38008000 0x8000>;
1337			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1338			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
1339				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
1340				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
1341			clock-names = "reg", "bus", "core";
1342			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
1343					  <&clk IMX8MM_GPU_PLL_OUT>;
1344			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
1345			assigned-clock-rates = <0>, <1000000000>;
1346			power-domains = <&pgc_gpu>;
1347		};
1348
1349		vpu_g1: video-codec@38300000 {
1350			compatible = "nxp,imx8mm-vpu-g1";
1351			reg = <0x38300000 0x10000>;
1352			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1353			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
1354			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
1355		};
1356
1357		vpu_g2: video-codec@38310000 {
1358			compatible = "nxp,imx8mq-vpu-g2";
1359			reg = <0x38310000 0x10000>;
1360			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1361			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
1362			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
1363		};
1364
1365		vpu_blk_ctrl: blk-ctrl@38330000 {
1366			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
1367			reg = <0x38330000 0x100>;
1368			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
1369					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
1370			power-domain-names = "bus", "g1", "g2", "h1";
1371			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
1372				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
1373				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
1374			clock-names = "g1", "g2", "h1";
1375			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
1376					  <&clk IMX8MM_CLK_VPU_G2>;
1377			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
1378						 <&clk IMX8MM_VPU_PLL_OUT>;
1379			assigned-clock-rates = <600000000>,
1380					       <600000000>;
1381			#power-domain-cells = <1>;
1382		};
1383
1384		gic: interrupt-controller@38800000 {
1385			compatible = "arm,gic-v3";
1386			reg = <0x38800000 0x10000>, /* GIC Dist */
1387			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1388			#interrupt-cells = <3>;
1389			interrupt-controller;
1390			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1391		};
1392
1393		ddrc: memory-controller@3d400000 {
1394			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1395			reg = <0x3d400000 0x400000>;
1396			clock-names = "core", "pll", "alt", "apb";
1397			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1398				 <&clk IMX8MM_DRAM_PLL>,
1399				 <&clk IMX8MM_CLK_DRAM_ALT>,
1400				 <&clk IMX8MM_CLK_DRAM_APB>;
1401		};
1402
1403		ddr-pmu@3d800000 {
1404			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1405			reg = <0x3d800000 0x400000>;
1406			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1407		};
1408	};
1409};
1410