xref: /openbmc/linux/arch/arm64/boot/dts/freescale/imx8mm.dtsi (revision 95fff86a)

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2019 NXP
 */

#include <dt-bindings/clock/imx8mm-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/imx8mm-power.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/thermal/thermal.h>

#include "imx8mm-pinfunc.h"

/ {
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		ethernet0 = &fec1;
		gpio0 = &gpio1;
		gpio1 = &gpio2;
		gpio2 = &gpio3;
		gpio3 = &gpio4;
		gpio4 = &gpio5;
		i2c0 = &i2c1;
		i2c1 = &i2c2;
		i2c2 = &i2c3;
		i2c3 = &i2c4;
		mmc0 = &usdhc1;
		mmc1 = &usdhc2;
		mmc2 = &usdhc3;
		serial0 = &uart1;
		serial1 = &uart2;
		serial2 = &uart3;
		serial3 = &uart4;
		spi0 = &ecspi1;
		spi1 = &ecspi2;
		spi2 = &ecspi3;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		idle-states {
			entry-method = "psci";

			cpu_pd_wait: cpu-pd-wait {
				compatible = "arm,idle-state";
				arm,psci-suspend-param = <0x0010033>;
				local-timer-stop;
				entry-latency-us = <1000>;
				exit-latency-us = <700>;
				min-residency-us = <2700>;
			};
		};

		A53_0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clk IMX8MM_CLK_ARM>;
			enable-method = "psci";
			i-cache-size = <0x8000>;
			i-cache-line-size = <64>;
			i-cache-sets = <256>;
			d-cache-size = <0x8000>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&A53_L2>;
			operating-points-v2 = <&a53_opp_table>;
			nvmem-cells = <&cpu_speed_grade>;
			nvmem-cell-names = "speed_grade";
			cpu-idle-states = <&cpu_pd_wait>;
			#cooling-cells = <2>;
		};

		A53_1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x1>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clk IMX8MM_CLK_ARM>;
			enable-method = "psci";
			i-cache-size = <0x8000>;
			i-cache-line-size = <64>;
			i-cache-sets = <256>;
			d-cache-size = <0x8000>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&A53_L2>;
			operating-points-v2 = <&a53_opp_table>;
			cpu-idle-states = <&cpu_pd_wait>;
			#cooling-cells = <2>;
		};

		A53_2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x2>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clk IMX8MM_CLK_ARM>;
			enable-method = "psci";
			i-cache-size = <0x8000>;
			i-cache-line-size = <64>;
			i-cache-sets = <256>;
			d-cache-size = <0x8000>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&A53_L2>;
			operating-points-v2 = <&a53_opp_table>;
			cpu-idle-states = <&cpu_pd_wait>;
			#cooling-cells = <2>;
		};

		A53_3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x3>;
			clock-latency = <61036>; /* two CLK32 periods */
			clocks = <&clk IMX8MM_CLK_ARM>;
			enable-method = "psci";
			i-cache-size = <0x8000>;
			i-cache-line-size = <64>;
			i-cache-sets = <256>;
			d-cache-size = <0x8000>;
			d-cache-line-size = <64>;
			d-cache-sets = <128>;
			next-level-cache = <&A53_L2>;
			operating-points-v2 = <&a53_opp_table>;
			cpu-idle-states = <&cpu_pd_wait>;
			#cooling-cells = <2>;
		};

		A53_L2: l2-cache0 {
			compatible = "cache";
			cache-level = <2>;
			cache-unified;
			cache-size = <0x80000>;
			cache-line-size = <64>;
			cache-sets = <512>;
		};
	};

	a53_opp_table: opp-table {
		compatible = "operating-points-v2";
		opp-shared;

		opp-1200000000 {
			opp-hz = /bits/ 64 <1200000000>;
			opp-microvolt = <850000>;
			opp-supported-hw = <0xe>, <0x7>;
			clock-latency-ns = <150000>;
			opp-suspend;
		};

		opp-1600000000 {
			opp-hz = /bits/ 64 <1600000000>;
			opp-microvolt = <950000>;
			opp-supported-hw = <0xc>, <0x7>;
			clock-latency-ns = <150000>;
			opp-suspend;
		};

		opp-1800000000 {
			opp-hz = /bits/ 64 <1800000000>;
			opp-microvolt = <1000000>;
			opp-supported-hw = <0x8>, <0x3>;
			clock-latency-ns = <150000>;
			opp-suspend;
		};
	};

	osc_32k: clock-osc-32k {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <32768>;
		clock-output-names = "osc_32k";
	};

	osc_24m: clock-osc-24m {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <24000000>;
		clock-output-names = "osc_24m";
	};

	clk_ext1: clock-ext1 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <133000000>;
		clock-output-names = "clk_ext1";
	};

	clk_ext2: clock-ext2 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <133000000>;
		clock-output-names = "clk_ext2";
	};

	clk_ext3: clock-ext3 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <133000000>;
		clock-output-names = "clk_ext3";
	};

	clk_ext4: clock-ext4 {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <133000000>;
		clock-output-names = "clk_ext4";
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_PPI 7
			     (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
		clock-frequency = <8000000>;
		arm,no-tick-in-suspend;
	};

	thermal-zones {
		cpu-thermal {
			polling-delay-passive = <250>;
			polling-delay = <2000>;
			thermal-sensors = <&tmu>;
			trips {
				cpu_alert0: trip0 {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_crit0: trip1 {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_alert0>;
					cooling-device =
						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

	usbphynop1: usbphynop1 {
		#phy-cells = <0>;
		compatible = "usb-nop-xceiv";
		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
		clock-names = "main_clk";
		power-domains = <&pgc_otg1>;
	};

	usbphynop2: usbphynop2 {
		#phy-cells = <0>;
		compatible = "usb-nop-xceiv";
		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
		clock-names = "main_clk";
		power-domains = <&pgc_otg2>;
	};

	soc: soc@0 {
		compatible = "fsl,imx8mm-soc", "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x0 0x0 0x3e000000>;
		dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>;
		nvmem-cells = <&imx8mm_uid>;
		nvmem-cell-names = "soc_unique_id";

		aips1: bus@30000000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x30000000 0x400000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x30000000 0x30000000 0x400000>;

			spba2: spba-bus@30000000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x30000000 0x100000>;
				ranges;

				sai1: sai@30010000 {
					#sound-dai-cells = <0>;
					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
					reg = <0x30010000 0x10000>;
					interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
						 <&clk IMX8MM_CLK_SAI1_ROOT>,
						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
					clock-names = "bus", "mclk1", "mclk2", "mclk3";
					dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				sai2: sai@30020000 {
					#sound-dai-cells = <0>;
					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
					reg = <0x30020000 0x10000>;
					interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
						<&clk IMX8MM_CLK_SAI2_ROOT>,
						<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
					clock-names = "bus", "mclk1", "mclk2", "mclk3";
					dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				sai3: sai@30030000 {
					#sound-dai-cells = <0>;
					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
					reg = <0x30030000 0x10000>;
					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
						 <&clk IMX8MM_CLK_SAI3_ROOT>,
						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
					clock-names = "bus", "mclk1", "mclk2", "mclk3";
					dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				sai5: sai@30050000 {
					#sound-dai-cells = <0>;
					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
					reg = <0x30050000 0x10000>;
					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
						 <&clk IMX8MM_CLK_SAI5_ROOT>,
						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
					clock-names = "bus", "mclk1", "mclk2", "mclk3";
					dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				sai6: sai@30060000 {
					#sound-dai-cells = <0>;
					compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
					reg = <0x30060000 0x10000>;
					interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
						 <&clk IMX8MM_CLK_SAI6_ROOT>,
						 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
					clock-names = "bus", "mclk1", "mclk2", "mclk3";
					dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				micfil: audio-controller@30080000 {
					compatible = "fsl,imx8mm-micfil";
					reg = <0x30080000 0x10000>;
					interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
						     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
						     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
						     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_PDM_IPG>,
						 <&clk IMX8MM_CLK_PDM_ROOT>,
						 <&clk IMX8MM_AUDIO_PLL1_OUT>,
						 <&clk IMX8MM_AUDIO_PLL2_OUT>,
						 <&clk IMX8MM_CLK_EXT3>;
					clock-names = "ipg_clk", "ipg_clk_app",
						      "pll8k", "pll11k", "clkext3";
					dmas = <&sdma2 24 25 0x80000000>;
					dma-names = "rx";
					#sound-dai-cells = <0>;
					status = "disabled";
				};

				spdif1: spdif@30090000 {
					compatible = "fsl,imx35-spdif";
					reg = <0x30090000 0x10000>;
					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
						 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
						 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
						 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
						 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
						 <&clk IMX8MM_CLK_DUMMY>; /* spba */
					clock-names = "core", "rxtx0",
						      "rxtx1", "rxtx2",
						      "rxtx3", "rxtx4",
						      "rxtx5", "rxtx6",
						      "rxtx7", "spba";
					dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};
			};

			gpio1: gpio@30200000 {
				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
				reg = <0x30200000 0x10000>;
				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				gpio-ranges = <&iomuxc 0 10 30>;
			};

			gpio2: gpio@30210000 {
				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
				reg = <0x30210000 0x10000>;
				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				gpio-ranges = <&iomuxc 0 40 21>;
			};

			gpio3: gpio@30220000 {
				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
				reg = <0x30220000 0x10000>;
				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				gpio-ranges = <&iomuxc 0 61 26>;
			};

			gpio4: gpio@30230000 {
				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
				reg = <0x30230000 0x10000>;
				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				gpio-ranges = <&iomuxc 0 87 32>;
			};

			gpio5: gpio@30240000 {
				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
				reg = <0x30240000 0x10000>;
				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
				gpio-controller;
				#gpio-cells = <2>;
				interrupt-controller;
				#interrupt-cells = <2>;
				gpio-ranges = <&iomuxc 0 119 30>;
			};

			tmu: tmu@30260000 {
				compatible = "fsl,imx8mm-tmu";
				reg = <0x30260000 0x10000>;
				clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
				nvmem-cells = <&tmu_calib>;
				nvmem-cell-names = "calib";
				#thermal-sensor-cells = <0>;
			};

			wdog1: watchdog@30280000 {
				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
				reg = <0x30280000 0x10000>;
				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
				status = "disabled";
			};

			wdog2: watchdog@30290000 {
				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
				reg = <0x30290000 0x10000>;
				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
				status = "disabled";
			};

			wdog3: watchdog@302a0000 {
				compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
				reg = <0x302a0000 0x10000>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
				status = "disabled";
			};

			sdma2: dma-controller@302c0000 {
				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
				reg = <0x302c0000 0x10000>;
				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
			};

			sdma3: dma-controller@302b0000 {
				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
				reg = <0x302b0000 0x10000>;
				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
			};

			iomuxc: pinctrl@30330000 {
				compatible = "fsl,imx8mm-iomuxc";
				reg = <0x30330000 0x10000>;
			};

			gpr: syscon@30340000 {
				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
				reg = <0x30340000 0x10000>;
			};

			ocotp: efuse@30350000 {
				compatible = "fsl,imx8mm-ocotp", "syscon";
				reg = <0x30350000 0x10000>;
				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
				/* For nvmem subnodes */
				#address-cells = <1>;
				#size-cells = <1>;

				/*
				 * The register address below maps to the MX8M
				 * Fusemap Description Table entries this way.
				 * Assuming
				 *   reg = <ADDR SIZE>;
				 * then
				 *   Fuse Address = (ADDR * 4) + 0x400
				 * Note that if SIZE is greater than 4, then
				 * each subsequent fuse is located at offset
				 * +0x10 in Fusemap Description Table (e.g.
				 * reg = <0x4 0x8> describes fuses 0x410 and
				 * 0x420).
				 */
				imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
					reg = <0x4 0x8>;
				};

				cpu_speed_grade: speed-grade@10 { /* 0x440 */
					reg = <0x10 4>;
				};

				tmu_calib: calib@3c { /* 0x4f0 */
					reg = <0x3c 4>;
				};

				fec_mac_address: mac-address@90 { /* 0x640 */
					reg = <0x90 6>;
				};
			};

			anatop: clock-controller@30360000 {
				compatible = "fsl,imx8mm-anatop";
				reg = <0x30360000 0x10000>;
				#clock-cells = <1>;
			};

			snvs: snvs@30370000 {
				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
				reg = <0x30370000 0x10000>;

				snvs_rtc: snvs-rtc-lp {
					compatible = "fsl,sec-v4.0-mon-rtc-lp";
					regmap = <&snvs>;
					offset = <0x34>;
					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
					clock-names = "snvs-rtc";
				};

				snvs_pwrkey: snvs-powerkey {
					compatible = "fsl,sec-v4.0-pwrkey";
					regmap = <&snvs>;
					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
					clock-names = "snvs-pwrkey";
					linux,keycode = <KEY_POWER>;
					wakeup-source;
					status = "disabled";
				};

				snvs_lpgpr: snvs-lpgpr {
					compatible = "fsl,imx8mm-snvs-lpgpr",
						     "fsl,imx7d-snvs-lpgpr";
				};
			};

			clk: clock-controller@30380000 {
				compatible = "fsl,imx8mm-ccm";
				reg = <0x30380000 0x10000>;
				#clock-cells = <1>;
				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
					 <&clk_ext3>, <&clk_ext4>;
				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
					      "clk_ext3", "clk_ext4";
				assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
						<&clk IMX8MM_CLK_A53_CORE>,
						<&clk IMX8MM_CLK_NOC>,
						<&clk IMX8MM_CLK_AUDIO_AHB>,
						<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
						<&clk IMX8MM_SYS_PLL3>,
						<&clk IMX8MM_VIDEO_PLL1>,
						<&clk IMX8MM_AUDIO_PLL1>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
							 <&clk IMX8MM_ARM_PLL_OUT>,
							 <&clk IMX8MM_SYS_PLL3_OUT>,
							 <&clk IMX8MM_SYS_PLL1_800M>;
				assigned-clock-rates = <0>, <0>, <0>,
							<400000000>,
							<400000000>,
							<750000000>,
							<594000000>,
							<393216000>;
			};

			src: reset-controller@30390000 {
				compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
				reg = <0x30390000 0x10000>;
				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
				#reset-cells = <1>;
			};

			gpc: gpc@303a0000 {
				compatible = "fsl,imx8mm-gpc";
				reg = <0x303a0000 0x10000>;
				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
				interrupt-parent = <&gic>;
				interrupt-controller;
				#interrupt-cells = <3>;

				pgc {
					#address-cells = <1>;
					#size-cells = <0>;

					pgc_hsiomix: power-domain@0 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
						clocks = <&clk IMX8MM_CLK_USB_BUS>;
						assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
					};

					pgc_pcie: power-domain@1 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_PCIE>;
						power-domains = <&pgc_hsiomix>;
						clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>;
					};

					pgc_otg1: power-domain@2 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
					};

					pgc_otg2: power-domain@3 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
					};

					pgc_gpumix: power-domain@4 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
						clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
							 <&clk IMX8MM_CLK_GPU_AHB>;
						assigned-clocks = <&clk IMX8MM_CLK_GPU_AXI>,
								  <&clk IMX8MM_CLK_GPU_AHB>;
						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
									 <&clk IMX8MM_SYS_PLL1_800M>;
						assigned-clock-rates = <800000000>, <400000000>;
					};

					pgc_gpu: power-domain@5 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_GPU>;
						clocks = <&clk IMX8MM_CLK_GPU_AHB>,
							 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
							 <&clk IMX8MM_CLK_GPU2D_ROOT>,
							 <&clk IMX8MM_CLK_GPU3D_ROOT>;
						resets = <&src IMX8MQ_RESET_GPU_RESET>;
						power-domains = <&pgc_gpumix>;
					};

					pgc_vpumix: power-domain@6 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_VPUMIX>;
						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
					};

					pgc_vpu_g1: power-domain@7 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_VPUG1>;
					};

					pgc_vpu_g2: power-domain@8 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_VPUG2>;
					};

					pgc_vpu_h1: power-domain@9 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_VPUH1>;
					};

					pgc_dispmix: power-domain@10 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
						clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
							 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
						assigned-clocks = <&clk IMX8MM_CLK_DISP_AXI>,
								  <&clk IMX8MM_CLK_DISP_APB>;
						assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
									 <&clk IMX8MM_SYS_PLL1_800M>;
						assigned-clock-rates = <500000000>, <200000000>;
					};

					pgc_mipi: power-domain@11 {
						#power-domain-cells = <0>;
						reg = <IMX8MM_POWER_DOMAIN_MIPI>;
					};
				};
			};
		};

		aips2: bus@30400000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x30400000 0x400000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x30400000 0x30400000 0x400000>;

			pwm1: pwm@30660000 {
				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
				reg = <0x30660000 0x10000>;
				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
					<&clk IMX8MM_CLK_PWM1_ROOT>;
				clock-names = "ipg", "per";
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm2: pwm@30670000 {
				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
				reg = <0x30670000 0x10000>;
				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
					 <&clk IMX8MM_CLK_PWM2_ROOT>;
				clock-names = "ipg", "per";
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm3: pwm@30680000 {
				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
				reg = <0x30680000 0x10000>;
				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
					 <&clk IMX8MM_CLK_PWM3_ROOT>;
				clock-names = "ipg", "per";
				#pwm-cells = <3>;
				status = "disabled";
			};

			pwm4: pwm@30690000 {
				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
				reg = <0x30690000 0x10000>;
				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
					 <&clk IMX8MM_CLK_PWM4_ROOT>;
				clock-names = "ipg", "per";
				#pwm-cells = <3>;
				status = "disabled";
			};

			system_counter: timer@306a0000 {
				compatible = "nxp,sysctr-timer";
				reg = <0x306a0000 0x20000>;
				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&osc_24m>;
				clock-names = "per";
			};
		};

		aips3: bus@30800000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x30800000 0x400000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x30800000 0x30800000 0x400000>,
				 <0x8000000 0x8000000 0x10000000>;

			spba1: spba-bus@30800000 {
				compatible = "fsl,spba-bus", "simple-bus";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x30800000 0x100000>;
				ranges;

				ecspi1: spi@30820000 {
					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x30820000 0x10000>;
					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
						 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
					clock-names = "ipg", "per";
					dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ecspi2: spi@30830000 {
					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x30830000 0x10000>;
					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
						 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
					clock-names = "ipg", "per";
					dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				ecspi3: spi@30840000 {
					compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x30840000 0x10000>;
					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
						 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
					clock-names = "ipg", "per";
					dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart1: serial@30860000 {
					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
					reg = <0x30860000 0x10000>;
					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
						 <&clk IMX8MM_CLK_UART1_ROOT>;
					clock-names = "ipg", "per";
					dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart3: serial@30880000 {
					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
					reg = <0x30880000 0x10000>;
					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
						 <&clk IMX8MM_CLK_UART3_ROOT>;
					clock-names = "ipg", "per";
					dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
					dma-names = "rx", "tx";
					status = "disabled";
				};

				uart2: serial@30890000 {
					compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
					reg = <0x30890000 0x10000>;
					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
						 <&clk IMX8MM_CLK_UART2_ROOT>;
					clock-names = "ipg", "per";
					status = "disabled";
				};
			};

			crypto: crypto@30900000 {
				compatible = "fsl,sec-v4.0";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0x30900000 0x40000>;
				ranges = <0 0x30900000 0x40000>;
				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_AHB>,
					 <&clk IMX8MM_CLK_IPG_ROOT>;
				clock-names = "aclk", "ipg";

				sec_jr0: jr@1000 {
					compatible = "fsl,sec-v4.0-job-ring";
					reg = <0x1000 0x1000>;
					interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
					status = "disabled";
				};

				sec_jr1: jr@2000 {
					compatible = "fsl,sec-v4.0-job-ring";
					reg = <0x2000 0x1000>;
					interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
				};

				sec_jr2: jr@3000 {
					compatible = "fsl,sec-v4.0-job-ring";
					reg = <0x3000 0x1000>;
					interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
				};
			};

			i2c1: i2c@30a20000 {
				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x30a20000 0x10000>;
				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
				status = "disabled";
			};

			i2c2: i2c@30a30000 {
				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x30a30000 0x10000>;
				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
				status = "disabled";
			};

			i2c3: i2c@30a40000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
				reg = <0x30a40000 0x10000>;
				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
				status = "disabled";
			};

			i2c4: i2c@30a50000 {
				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x30a50000 0x10000>;
				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
				status = "disabled";
			};

			uart4: serial@30a60000 {
				compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
				reg = <0x30a60000 0x10000>;
				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
					 <&clk IMX8MM_CLK_UART4_ROOT>;
				clock-names = "ipg", "per";
				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
				dma-names = "rx", "tx";
				status = "disabled";
			};

			mu: mailbox@30aa0000 {
				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
				reg = <0x30aa0000 0x10000>;
				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
				#mbox-cells = <2>;
			};

			usdhc1: mmc@30b40000 {
				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
				reg = <0x30b40000 0x10000>;
				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
				clock-names = "ipg", "ahb", "per";
				fsl,tuning-start-tap = <20>;
				fsl,tuning-step = <2>;
				bus-width = <4>;
				status = "disabled";
			};

			usdhc2: mmc@30b50000 {
				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
				reg = <0x30b50000 0x10000>;
				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
				clock-names = "ipg", "ahb", "per";
				fsl,tuning-start-tap = <20>;
				fsl,tuning-step = <2>;
				bus-width = <4>;
				status = "disabled";
			};

			usdhc3: mmc@30b60000 {
				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
				reg = <0x30b60000 0x10000>;
				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
				clock-names = "ipg", "ahb", "per";
				fsl,tuning-start-tap = <20>;
				fsl,tuning-step = <2>;
				bus-width = <4>;
				status = "disabled";
			};

			flexspi: spi@30bb0000 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "nxp,imx8mm-fspi";
				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
				reg-names = "fspi_base", "fspi_mmap";
				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
					 <&clk IMX8MM_CLK_QSPI_ROOT>;
				clock-names = "fspi_en", "fspi";
				status = "disabled";
			};

			sdma1: dma-controller@30bd0000 {
				compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
				reg = <0x30bd0000 0x10000>;
				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
					 <&clk IMX8MM_CLK_AHB>;
				clock-names = "ipg", "ahb";
				#dma-cells = <3>;
				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
			};

			fec1: ethernet@30be0000 {
				compatible = "fsl,imx8mm-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
				reg = <0x30be0000 0x10000>;
				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
					 <&clk IMX8MM_CLK_ENET1_ROOT>,
					 <&clk IMX8MM_CLK_ENET_TIMER>,
					 <&clk IMX8MM_CLK_ENET_REF>,
					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
				clock-names = "ipg", "ahb", "ptp",
					      "enet_clk_ref", "enet_out";
				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
						  <&clk IMX8MM_CLK_ENET_TIMER>,
						  <&clk IMX8MM_CLK_ENET_REF>,
						  <&clk IMX8MM_CLK_ENET_PHY_REF>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
							 <&clk IMX8MM_SYS_PLL2_100M>,
							 <&clk IMX8MM_SYS_PLL2_125M>,
							 <&clk IMX8MM_SYS_PLL2_50M>;
				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
				fsl,num-tx-queues = <3>;
				fsl,num-rx-queues = <3>;
				nvmem-cells = <&fec_mac_address>;
				nvmem-cell-names = "mac-address";
				fsl,stop-mode = <&gpr 0x10 3>;
				status = "disabled";
			};

		};

		aips4: bus@32c00000 {
			compatible = "fsl,aips-bus", "simple-bus";
			reg = <0x32c00000 0x400000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x32c00000 0x32c00000 0x400000>;

			lcdif: lcdif@32e00000 {
				compatible = "fsl,imx8mm-lcdif", "fsl,imx6sx-lcdif";
				reg = <0x32e00000 0x10000>;
				clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
				clock-names = "pix", "axi", "disp_axi";
				assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
						  <&clk IMX8MM_CLK_DISP_AXI>,
						  <&clk IMX8MM_CLK_DISP_APB>;
				assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>,
							 <&clk IMX8MM_SYS_PLL2_1000M>,
							 <&clk IMX8MM_SYS_PLL1_800M>;
				assigned-clock-rates = <594000000>, <500000000>, <200000000>;
				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>;
				status = "disabled";

				port {
					lcdif_to_dsim: endpoint {
						remote-endpoint = <&dsim_from_lcdif>;
					};
				};
			};

			mipi_dsi: dsi@32e10000 {
				compatible = "fsl,imx8mm-mipi-dsim";
				reg = <0x32e10000 0x400>;
				clocks = <&clk IMX8MM_CLK_DSI_CORE>,
					 <&clk IMX8MM_CLK_DSI_PHY_REF>;
				clock-names = "bus_clk", "sclk_mipi";
				assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
						  <&clk IMX8MM_CLK_DSI_PHY_REF>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
							 <&clk IMX8MM_CLK_24M>;
				assigned-clock-rates = <266000000>, <24000000>;
				samsung,pll-clock-frequency = <24000000>;
				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>;
				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;

						dsim_from_lcdif: endpoint {
							remote-endpoint = <&lcdif_to_dsim>;
						};
					};
				};
			};

			csi: csi@32e20000 {
				compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
				reg = <0x32e20000 0x1000>;
				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
				clock-names = "mclk";
				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
				status = "disabled";

				port {
					csi_in: endpoint {
						remote-endpoint = <&imx8mm_mipi_csi_out>;
					};
				};
			};

			disp_blk_ctrl: blk-ctrl@32e28000 {
				compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
				reg = <0x32e28000 0x100>;
				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
						<&pgc_dispmix>, <&pgc_mipi>,
						<&pgc_mipi>;
				power-domain-names = "bus", "csi-bridge",
						     "lcdif", "mipi-dsi",
						     "mipi-csi";
				clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
					 <&clk IMX8MM_CLK_CSI1_ROOT>,
					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
					 <&clk IMX8MM_CLK_DISP_APB_ROOT>,
					 <&clk IMX8MM_CLK_DISP_ROOT>,
					 <&clk IMX8MM_CLK_DSI_CORE>,
					 <&clk IMX8MM_CLK_DSI_PHY_REF>,
					 <&clk IMX8MM_CLK_CSI1_CORE>,
					 <&clk IMX8MM_CLK_CSI1_PHY_REF>;
				clock-names = "csi-bridge-axi","csi-bridge-apb",
					      "csi-bridge-core", "lcdif-axi",
					      "lcdif-apb", "lcdif-pix",
					      "dsi-pclk", "dsi-ref",
					      "csi-aclk", "csi-pclk";
				#power-domain-cells = <1>;
			};

			mipi_csi: mipi-csi@32e30000 {
				compatible = "fsl,imx8mm-mipi-csi2";
				reg = <0x32e30000 0x1000>;
				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;

				clock-frequency = <333000000>;
				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
					 <&clk IMX8MM_CLK_CSI1_ROOT>,
					 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
					 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
				clock-names = "pclk", "wrap", "phy", "axi";
				power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
				status = "disabled";

				ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
					};

					port@1 {
						reg = <1>;

						imx8mm_mipi_csi_out: endpoint {
							remote-endpoint = <&csi_in>;
						};
					};
				};
			};

			usbotg1: usb@32e40000 {
				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
				reg = <0x32e40000 0x200>;
				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
				clock-names = "usb1_ctrl_root_clk";
				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
				phys = <&usbphynop1>;
				fsl,usbmisc = <&usbmisc1 0>;
				power-domains = <&pgc_hsiomix>;
				status = "disabled";
			};

			usbmisc1: usbmisc@32e40200 {
				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
					     "fsl,imx6q-usbmisc";
				#index-cells = <1>;
				reg = <0x32e40200 0x200>;
			};

			usbotg2: usb@32e50000 {
				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
				reg = <0x32e50000 0x200>;
				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
				clock-names = "usb1_ctrl_root_clk";
				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
				phys = <&usbphynop2>;
				fsl,usbmisc = <&usbmisc2 0>;
				power-domains = <&pgc_hsiomix>;
				status = "disabled";
			};

			usbmisc2: usbmisc@32e50200 {
				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
					     "fsl,imx6q-usbmisc";
				#index-cells = <1>;
				reg = <0x32e50200 0x200>;
			};

			pcie_phy: pcie-phy@32f00000 {
				compatible = "fsl,imx8mm-pcie-phy";
				reg = <0x32f00000 0x10000>;
				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
				clock-names = "ref";
				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
				assigned-clock-rates = <100000000>;
				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
				resets = <&src IMX8MQ_RESET_PCIEPHY>;
				reset-names = "pciephy";
				#phy-cells = <0>;
				status = "disabled";
			};
		};

		dma_apbh: dma-controller@33000000 {
			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
			reg = <0x33000000 0x2000>;
			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
			#dma-cells = <1>;
			dma-channels = <4>;
			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
		};

		gpmi: nand-controller@33002000 {
			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
			reg-names = "gpmi-nand", "bch";
			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "bch";
			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
				 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
			clock-names = "gpmi_io", "gpmi_bch_apb";
			dmas = <&dma_apbh 0>;
			dma-names = "rx-tx";
			status = "disabled";
		};

		pcie0: pcie@33800000 {
			compatible = "fsl,imx8mm-pcie";
			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
			reg-names = "dbi", "config";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			bus-range = <0x00 0xff>;
			ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
				 <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
			num-lanes = <1>;
			num-viewport = <4>;
			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
			fsl,max-link-speed = <2>;
			linux,pci-domain = <0>;
			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
				 <&clk IMX8MM_CLK_PCIE1_PHY>,
				 <&clk IMX8MM_CLK_PCIE1_AUX>;
			clock-names = "pcie", "pcie_bus", "pcie_aux";
			power-domains = <&pgc_pcie>;
			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
			reset-names = "apps", "turnoff";
			phys = <&pcie_phy>;
			phy-names = "pcie-phy";
			status = "disabled";
		};

		pcie0_ep: pcie-ep@33800000 {
			compatible = "fsl,imx8mm-pcie-ep";
			reg = <0x33800000 0x400000>,
			      <0x18000000 0x8000000>;
			reg-names = "dbi", "addr_space";
			num-lanes = <1>;
			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "dma";
			fsl,max-link-speed = <2>;
			clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
				 <&clk IMX8MM_CLK_PCIE1_PHY>,
				 <&clk IMX8MM_CLK_PCIE1_AUX>;
			clock-names = "pcie", "pcie_bus", "pcie_aux";
			power-domains = <&pgc_pcie>;
			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
			reset-names = "apps", "turnoff";
			phys = <&pcie_phy>;
			phy-names = "pcie-phy";
			num-ib-windows = <4>;
			num-ob-windows = <4>;
			status = "disabled";
		};

		gpu_3d: gpu@38000000 {
			compatible = "vivante,gc";
			reg = <0x38000000 0x8000>;
			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
				 <&clk IMX8MM_CLK_GPU3D_ROOT>,
				 <&clk IMX8MM_CLK_GPU3D_ROOT>;
			clock-names = "reg", "bus", "core", "shader";
			assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>,
					  <&clk IMX8MM_GPU_PLL_OUT>;
			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
			assigned-clock-rates = <0>, <800000000>;
			power-domains = <&pgc_gpu>;
		};

		gpu_2d: gpu@38008000 {
			compatible = "vivante,gc";
			reg = <0x38008000 0x8000>;
			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk IMX8MM_CLK_GPU_AHB>,
				 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
				 <&clk IMX8MM_CLK_GPU2D_ROOT>;
			clock-names = "reg", "bus", "core";
			assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>,
					  <&clk IMX8MM_GPU_PLL_OUT>;
			assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>;
			assigned-clock-rates = <0>, <800000000>;
			power-domains = <&pgc_gpu>;
		};

		vpu_g1: video-codec@38300000 {
			compatible = "nxp,imx8mm-vpu-g1";
			reg = <0x38300000 0x10000>;
			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
		};

		vpu_g2: video-codec@38310000 {
			compatible = "nxp,imx8mq-vpu-g2";
			reg = <0x38310000 0x10000>;
			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
		};

		vpu_blk_ctrl: blk-ctrl@38330000 {
			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
			reg = <0x38330000 0x100>;
			power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
					<&pgc_vpu_g2>, <&pgc_vpu_h1>;
			power-domain-names = "bus", "g1", "g2", "h1";
			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
			clock-names = "g1", "g2", "h1";
			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
					  <&clk IMX8MM_CLK_VPU_G2>;
			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
						 <&clk IMX8MM_VPU_PLL_OUT>;
			assigned-clock-rates = <600000000>,
					       <600000000>;
			#power-domain-cells = <1>;
		};

		gic: interrupt-controller@38800000 {
			compatible = "arm,gic-v3";
			reg = <0x38800000 0x10000>, /* GIC Dist */
			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
			#interrupt-cells = <3>;
			interrupt-controller;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
		};

		ddrc: memory-controller@3d400000 {
			compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
			reg = <0x3d400000 0x400000>;
			clock-names = "core", "pll", "alt", "apb";
			clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
				 <&clk IMX8MM_DRAM_PLL>,
				 <&clk IMX8MM_CLK_DRAM_ALT>,
				 <&clk IMX8MM_CLK_DRAM_APB>;
		};

		ddr-pmu@3d800000 {
			compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
			reg = <0x3d800000 0x400000>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
		};
	};
};