1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2020 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/leds/common.h> 8 9/ { 10 aliases { 11 usb0 = &usbotg1; 12 usb1 = &usbotg2; 13 }; 14 15 led-controller { 16 compatible = "gpio-leds"; 17 pinctrl-names = "default"; 18 pinctrl-0 = <&pinctrl_gpio_leds>; 19 20 led-0 { 21 function = LED_FUNCTION_STATUS; 22 color = <LED_COLOR_ID_GREEN>; 23 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; 24 default-state = "on"; 25 linux,default-trigger = "heartbeat"; 26 }; 27 28 led-1 { 29 function = LED_FUNCTION_STATUS; 30 color = <LED_COLOR_ID_RED>; 31 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; 32 default-state = "off"; 33 }; 34 }; 35 36 pps { 37 compatible = "pps-gpio"; 38 pinctrl-names = "default"; 39 pinctrl-0 = <&pinctrl_pps>; 40 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; 41 status = "okay"; 42 }; 43 44 reg_1p8v: regulator-1p8v { 45 compatible = "regulator-fixed"; 46 regulator-name = "1P8V"; 47 regulator-min-microvolt = <1800000>; 48 regulator-max-microvolt = <1800000>; 49 regulator-always-on; 50 }; 51 52 reg_3p3v: regulator-3p3v { 53 compatible = "regulator-fixed"; 54 regulator-name = "3P3V"; 55 regulator-min-microvolt = <3300000>; 56 regulator-max-microvolt = <3300000>; 57 regulator-always-on; 58 }; 59 60 reg_usb_otg1_vbus: regulator-usb-otg1 { 61 pinctrl-names = "default"; 62 pinctrl-0 = <&pinctrl_reg_usb1_en>; 63 compatible = "regulator-fixed"; 64 regulator-name = "usb_otg1_vbus"; 65 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; 66 enable-active-high; 67 regulator-min-microvolt = <5000000>; 68 regulator-max-microvolt = <5000000>; 69 }; 70 71 reg_usb_otg2_vbus: regulator-usb-otg2 { 72 pinctrl-names = "default"; 73 pinctrl-0 = <&pinctrl_reg_usb2_en>; 74 compatible = "regulator-fixed"; 75 regulator-name = "usb_otg2_vbus"; 76 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; 77 enable-active-high; 78 regulator-min-microvolt = <5000000>; 79 regulator-max-microvolt = <5000000>; 80 }; 81 82 reg_wifi_en: regulator-wifi-en { 83 pinctrl-names = "default"; 84 pinctrl-0 = <&pinctrl_reg_wl>; 85 compatible = "regulator-fixed"; 86 regulator-name = "wl"; 87 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; 88 startup-delay-us = <100>; 89 enable-active-high; 90 regulator-min-microvolt = <3300000>; 91 regulator-max-microvolt = <3300000>; 92 }; 93}; 94 95/* off-board header */ 96&ecspi2 { 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pinctrl_spi2>; 99 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 100 status = "okay"; 101}; 102 103&i2c2 { 104 clock-frequency = <400000>; 105 pinctrl-names = "default"; 106 pinctrl-0 = <&pinctrl_i2c2>; 107 status = "okay"; 108 109 accelerometer@19 { 110 pinctrl-names = "default"; 111 pinctrl-0 = <&pinctrl_accel>; 112 compatible = "st,lis2de12"; 113 reg = <0x19>; 114 st,drdy-int-pin = <1>; 115 interrupt-parent = <&gpio4>; 116 interrupts = <5 IRQ_TYPE_LEVEL_LOW>; 117 interrupt-names = "INT1"; 118 }; 119}; 120 121/* off-board header */ 122&i2c3 { 123 clock-frequency = <400000>; 124 pinctrl-names = "default"; 125 pinctrl-0 = <&pinctrl_i2c3>; 126 status = "okay"; 127}; 128 129/* off-board header */ 130&sai3 { 131 pinctrl-names = "default"; 132 pinctrl-0 = <&pinctrl_sai3>; 133 assigned-clocks = <&clk IMX8MM_CLK_SAI3>; 134 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; 135 assigned-clock-rates = <24576000>; 136 status = "okay"; 137}; 138 139/* GPS */ 140&uart1 { 141 pinctrl-names = "default"; 142 pinctrl-0 = <&pinctrl_uart1>; 143 status = "okay"; 144}; 145 146/* bluetooth HCI */ 147&uart3 { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; 150 cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; 151 rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; 152 status = "okay"; 153 154 bluetooth { 155 compatible = "brcm,bcm4330-bt"; 156 shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; 157 }; 158}; 159 160/* RS232 */ 161&uart4 { 162 pinctrl-names = "default"; 163 pinctrl-0 = <&pinctrl_uart4>; 164 status = "okay"; 165}; 166 167&usbotg1 { 168 dr_mode = "otg"; 169 vbus-supply = <®_usb_otg1_vbus>; 170 status = "okay"; 171}; 172 173&usbotg2 { 174 dr_mode = "host"; 175 vbus-supply = <®_usb_otg2_vbus>; 176 status = "okay"; 177}; 178 179/* SDIO WiFi */ 180&usdhc1 { 181 pinctrl-names = "default"; 182 pinctrl-0 = <&pinctrl_usdhc1>; 183 bus-width = <4>; 184 non-removable; 185 vmmc-supply = <®_wifi_en>; 186 status = "okay"; 187}; 188 189/* microSD */ 190&usdhc2 { 191 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 192 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; 193 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; 194 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; 195 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 196 bus-width = <4>; 197 vmmc-supply = <®_3p3v>; 198 status = "okay"; 199}; 200 201&iomuxc { 202 pinctrl-names = "default"; 203 pinctrl-0 = <&pinctrl_hog>; 204 205 pinctrl_hog: hoggrp { 206 fsl,pins = < 207 MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ 208 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ 209 MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ 210 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ 211 MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ 212 MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ 213 MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ 214 MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ 215 >; 216 }; 217 218 pinctrl_accel: accelgrp { 219 fsl,pins = < 220 MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 221 >; 222 }; 223 224 pinctrl_bten: btengrp { 225 fsl,pins = < 226 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 227 >; 228 }; 229 230 pinctrl_gpio_leds: gpioledgrp { 231 fsl,pins = < 232 MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 233 MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 234 >; 235 }; 236 237 pinctrl_i2c3: i2c3grp { 238 fsl,pins = < 239 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 240 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 241 >; 242 }; 243 244 pinctrl_pps: ppsgrp { 245 fsl,pins = < 246 MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 247 >; 248 }; 249 250 pinctrl_reg_wl: regwlgrp { 251 fsl,pins = < 252 MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 253 >; 254 }; 255 256 pinctrl_reg_usb1_en: regusb1grp { 257 fsl,pins = < 258 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 259 MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 260 >; 261 }; 262 263 pinctrl_reg_usb2_en: regusb2grp { 264 fsl,pins = < 265 MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 266 >; 267 }; 268 269 pinctrl_sai3: sai3grp { 270 fsl,pins = < 271 MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 272 MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 273 MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 274 MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 275 MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 276 >; 277 }; 278 279 pinctrl_spi2: spi2grp { 280 fsl,pins = < 281 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 282 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 283 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 284 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 285 >; 286 }; 287 288 pinctrl_uart1: uart1grp { 289 fsl,pins = < 290 MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 291 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 292 >; 293 }; 294 295 pinctrl_uart3: uart3grp { 296 fsl,pins = < 297 MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 298 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 299 MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140 300 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 301 >; 302 }; 303 304 pinctrl_uart4: uart4grp { 305 fsl,pins = < 306 MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 307 MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 308 >; 309 }; 310 311 pinctrl_usdhc1: usdhc1grp { 312 fsl,pins = < 313 MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 314 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 315 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 316 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 317 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 318 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 319 >; 320 }; 321 322 pinctrl_usdhc2: usdhc2grp { 323 fsl,pins = < 324 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 325 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 326 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 327 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 328 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 329 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 330 >; 331 }; 332 333 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 334 fsl,pins = < 335 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 336 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 337 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 338 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 339 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 340 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 341 >; 342 }; 343 344 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 345 fsl,pins = < 346 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 347 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 348 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 349 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 350 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 351 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 352 >; 353 }; 354 355 pinctrl_usdhc2_gpio: usdhc2gpiogrp { 356 fsl,pins = < 357 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 358 MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 359 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 360 >; 361 }; 362}; 363