1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2020 Gateworks Corporation
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/leds/common.h>
8
9/ {
10	aliases {
11		usb0 = &usbotg1;
12		usb1 = &usbotg2;
13	};
14
15	led-controller {
16		compatible = "gpio-leds";
17		pinctrl-names = "default";
18		pinctrl-0 = <&pinctrl_gpio_leds>;
19
20		led-0 {
21			function = LED_FUNCTION_STATUS;
22			color = <LED_COLOR_ID_GREEN>;
23			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
24			default-state = "on";
25			linux,default-trigger = "heartbeat";
26		};
27
28		led-1 {
29			function = LED_FUNCTION_STATUS;
30			color = <LED_COLOR_ID_RED>;
31			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
32			default-state = "off";
33		};
34	};
35
36	pps {
37		compatible = "pps-gpio";
38		pinctrl-names = "default";
39		pinctrl-0 = <&pinctrl_pps>;
40		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
41		status = "okay";
42	};
43
44	reg_usb_otg1_vbus: regulator-usb-otg1 {
45		pinctrl-names = "default";
46		pinctrl-0 = <&pinctrl_reg_usb1_en>;
47		compatible = "regulator-fixed";
48		regulator-name = "usb_otg1_vbus";
49		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
50		enable-active-high;
51		regulator-min-microvolt = <5000000>;
52		regulator-max-microvolt = <5000000>;
53	};
54};
55
56/* off-board header */
57&ecspi2 {
58	pinctrl-names = "default";
59	pinctrl-0 = <&pinctrl_spi2>;
60	cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>;
61	status = "okay";
62};
63
64&i2c2 {
65	clock-frequency = <400000>;
66	pinctrl-names = "default";
67	pinctrl-0 = <&pinctrl_i2c2>;
68	status = "okay";
69
70	accelerometer@19 {
71		pinctrl-names = "default";
72		pinctrl-0 = <&pinctrl_accel>;
73		compatible = "st,lis2de12";
74		reg = <0x19>;
75		st,drdy-int-pin = <1>;
76		interrupt-parent = <&gpio4>;
77		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
78		interrupt-names = "INT1";
79	};
80};
81
82/* off-board header */
83&i2c3 {
84	clock-frequency = <400000>;
85	pinctrl-names = "default";
86	pinctrl-0 = <&pinctrl_i2c3>;
87	status = "okay";
88};
89
90/* GPS */
91&uart1 {
92	pinctrl-names = "default";
93	pinctrl-0 = <&pinctrl_uart1>;
94	status = "okay";
95};
96
97/* off-board header */
98&uart3 {
99	pinctrl-names = "default";
100	pinctrl-0 = <&pinctrl_uart3>;
101	status = "okay";
102};
103
104&usbotg1 {
105	dr_mode = "otg";
106	vbus-supply = <&reg_usb_otg1_vbus>;
107	status = "okay";
108};
109
110&usbotg2 {
111	dr_mode = "host";
112	status = "okay";
113};
114
115&iomuxc {
116	pinctrl-names = "default";
117	pinctrl-0 = <&pinctrl_hog>;
118
119	pinctrl_hog: hoggrp {
120		fsl,pins = <
121			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x40000041 /* PLUG_TEST */
122			MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6	0x40000041 /* PCI_USBSEL */
123			MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7	0x40000041 /* PCIE_WDIS# */
124			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x40000041 /* DIO0 */
125			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x40000041 /* DIO1 */
126			MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3	0x40000041 /* DIO2 */
127			MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4	0x40000041 /* DIO2 */
128		>;
129	};
130
131	pinctrl_accel: accelgrp {
132		fsl,pins = <
133			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x159
134		>;
135	};
136
137	pinctrl_gpio_leds: gpioledgrp {
138		fsl,pins = <
139			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
140			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
141		>;
142	};
143
144	pinctrl_i2c3: i2c3grp {
145		fsl,pins = <
146			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
147			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
148		>;
149	};
150
151	pinctrl_pps: ppsgrp {
152		fsl,pins = <
153			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
154		>;
155	};
156
157	pinctrl_reg_usb1_en: regusb1grp {
158		fsl,pins = <
159			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x41
160			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC	0x41
161		>;
162	};
163
164	pinctrl_spi2: spi2grp {
165		fsl,pins = <
166			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
167			MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0xd6
168			MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0xd6
169			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13	0xd6
170		>;
171	};
172
173	pinctrl_uart1: uart1grp {
174		fsl,pins = <
175			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
176			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
177		>;
178	};
179
180	pinctrl_uart3: uart3grp {
181		fsl,pins = <
182			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX	0x140
183			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX	0x140
184		>;
185	};
186};
187