1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2019~2020, 2022 NXP
4 */
5
6#include <dt-bindings/clock/imx8-clock.h>
7#include <dt-bindings/firmware/imx/rsrc.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/pinctrl/pads-imx8dxl.h>
12#include <dt-bindings/thermal/thermal.h>
13
14/ {
15	interrupt-parent = <&gic>;
16	#address-cells = <2>;
17	#size-cells = <2>;
18
19	aliases {
20		ethernet0 = &fec1;
21		ethernet1 = &eqos;
22		gpio0 = &lsio_gpio0;
23		gpio1 = &lsio_gpio1;
24		gpio2 = &lsio_gpio2;
25		gpio3 = &lsio_gpio3;
26		gpio4 = &lsio_gpio4;
27		gpio5 = &lsio_gpio5;
28		gpio6 = &lsio_gpio6;
29		gpio7 = &lsio_gpio7;
30		mu1 = &lsio_mu1;
31	};
32
33	cpus: cpus {
34		#address-cells = <2>;
35		#size-cells = <0>;
36
37		/* We have 1 clusters with 2 Cortex-A35 cores */
38		A35_0: cpu@0 {
39			device_type = "cpu";
40			compatible = "arm,cortex-a35";
41			reg = <0x0 0x0>;
42			enable-method = "psci";
43			next-level-cache = <&A35_L2>;
44			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
45			#cooling-cells = <2>;
46			operating-points-v2 = <&a35_opp_table>;
47		};
48
49		A35_1: cpu@1 {
50			device_type = "cpu";
51			compatible = "arm,cortex-a35";
52			reg = <0x0 0x1>;
53			enable-method = "psci";
54			next-level-cache = <&A35_L2>;
55			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
56			#cooling-cells = <2>;
57			operating-points-v2 = <&a35_opp_table>;
58		};
59
60		A35_L2: l2-cache0 {
61			compatible = "cache";
62			cache-level = <2>;
63			cache-unified;
64		};
65	};
66
67	a35_opp_table: opp-table {
68		compatible = "operating-points-v2";
69		opp-shared;
70
71		opp-900000000 {
72			opp-hz = /bits/ 64 <900000000>;
73			opp-microvolt = <1000000>;
74			clock-latency-ns = <150000>;
75		};
76
77		opp-1200000000 {
78			opp-hz = /bits/ 64 <1200000000>;
79			opp-microvolt = <1100000>;
80			clock-latency-ns = <150000>;
81			opp-suspend;
82		};
83	};
84
85	gic: interrupt-controller@51a00000 {
86		compatible = "arm,gic-v3";
87		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
88		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
89		#interrupt-cells = <3>;
90		interrupt-controller;
91		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
92	};
93
94	reserved-memory {
95		#address-cells = <2>;
96		#size-cells = <2>;
97		ranges;
98
99		dsp_reserved: dsp@92400000 {
100			reg = <0 0x92400000 0 0x2000000>;
101			no-map;
102		};
103	};
104
105	pmu {
106		compatible = "arm,armv8-pmuv3";
107		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
108	};
109
110	psci {
111		compatible = "arm,psci-1.0";
112		method = "smc";
113	};
114
115	system-controller {
116		compatible = "fsl,imx-scu";
117		mbox-names = "tx0",
118			     "rx0",
119			     "gip3";
120		mboxes = <&lsio_mu1 0 0
121			  &lsio_mu1 1 0
122			  &lsio_mu1 3 3>;
123
124		pd: power-controller {
125			compatible = "fsl,scu-pd";
126			#power-domain-cells = <1>;
127			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
128				     239 240 166 169>;
129		};
130
131		clk: clock-controller {
132			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
133			#clock-cells = <2>;
134		};
135
136		scu_gpio: gpio {
137			compatible = "fsl,imx8qxp-sc-gpio";
138			gpio-controller;
139			#gpio-cells = <2>;
140		};
141
142		iomuxc: pinctrl {
143			compatible = "fsl,imx8dxl-iomuxc";
144		};
145
146		ocotp: ocotp {
147			compatible = "fsl,imx8qxp-scu-ocotp";
148			#address-cells = <1>;
149			#size-cells = <1>;
150
151			fec_mac0: mac@2c4 {
152				reg = <0x2c4 6>;
153			};
154
155			fec_mac1: mac@2c6 {
156				reg = <0x2c6 6>;
157			};
158		};
159
160		rtc: rtc {
161			compatible = "fsl,imx8qxp-sc-rtc";
162		};
163
164		sc_pwrkey: keys {
165			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
166			linux,keycodes = <KEY_POWER>;
167			wakeup-source;
168		};
169
170		watchdog {
171			compatible = "fsl,imx-sc-wdt";
172			timeout-sec = <60>;
173		};
174
175		tsens: thermal-sensor {
176			compatible = "fsl,imx-sc-thermal";
177			#thermal-sensor-cells = <1>;
178		};
179	};
180
181	timer {
182		compatible = "arm,armv8-timer";
183		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
184			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
185			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
186			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
187	};
188
189	thermal_zones: thermal-zones {
190		cpu-thermal {
191			polling-delay-passive = <250>;
192			polling-delay = <2000>;
193			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
194
195			trips {
196				cpu_alert0: trip0 {
197					temperature = <107000>;
198					hysteresis = <2000>;
199					type = "passive";
200				};
201				cpu_crit0: trip1 {
202					temperature = <127000>;
203					hysteresis = <2000>;
204					type = "critical";
205				};
206			};
207
208			cooling-maps {
209				map0 {
210					trip = <&cpu_alert0>;
211					cooling-device =
212					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
213					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
214				};
215			};
216		};
217	};
218
219	/* The two values below cannot be changed by the board */
220	xtal32k: clock-xtal32k {
221		compatible = "fixed-clock";
222		#clock-cells = <0>;
223		clock-frequency = <32768>;
224		clock-output-names = "xtal_32KHz";
225	};
226
227	xtal24m: clock-xtal24m {
228		compatible = "fixed-clock";
229		#clock-cells = <0>;
230		clock-frequency = <24000000>;
231		clock-output-names = "xtal_24MHz";
232	};
233
234	/* sorted in register address */
235	#include "imx8-ss-adma.dtsi"
236	#include "imx8-ss-conn.dtsi"
237	#include "imx8-ss-ddr.dtsi"
238	#include "imx8-ss-lsio.dtsi"
239};
240
241#include "imx8dxl-ss-adma.dtsi"
242#include "imx8dxl-ss-conn.dtsi"
243#include "imx8dxl-ss-lsio.dtsi"
244#include "imx8dxl-ss-ddr.dtsi"
245