1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Device Tree file for LX2160A-CEx7
4//
5// Copyright 2019 SolidRun Ltd.
6
7/dts-v1/;
8
9#include "fsl-lx2160a.dtsi"
10
11/ {
12	model = "SolidRun LX2160A COM Express Type 7 module";
13	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
14
15	aliases {
16		crypto = &crypto;
17	};
18
19	sb_3v3: regulator-sb3v3 {
20		compatible = "regulator-fixed";
21		regulator-name = "RT7290";
22		regulator-min-microvolt = <3300000>;
23		regulator-max-microvolt = <3300000>;
24		regulator-boot-on;
25		regulator-always-on;
26	};
27};
28
29&crypto {
30	status = "okay";
31};
32
33&dpmac17 {
34	phy-handle = <&rgmii_phy1>;
35	phy-connection-type = "rgmii-id";
36};
37
38&emdio1 {
39	status = "okay";
40
41	rgmii_phy1: ethernet-phy@1 {
42		reg = <1>;
43	};
44};
45
46&esdhc1 {
47	mmc-hs200-1_8v;
48	mmc-hs400-1_8v;
49	bus-width = <8>;
50	status = "okay";
51};
52
53&i2c0 {
54	status = "okay";
55
56	i2c-switch@77 {
57		compatible = "nxp,pca9547";
58		#address-cells = <1>;
59		#size-cells = <0>;
60		reg = <0x77>;
61
62		i2c@0 {
63			#address-cells = <1>;
64			#size-cells = <0>;
65			reg = <0>;
66
67			eeprom@50 {
68				compatible = "atmel,24c512";
69				reg = <0x50>;
70			};
71
72			eeprom@51 {
73				compatible = "atmel,spd";
74				reg = <0x51>;
75			};
76
77			eeprom@53 {
78				compatible = "atmel,spd";
79				reg = <0x53>;
80			};
81
82			eeprom@57 {
83				compatible = "atmel,24c02";
84				reg = <0x57>;
85			};
86		};
87
88		i2c@1 {
89			#address-cells = <1>;
90			#size-cells = <0>;
91			reg = <1>;
92
93			fan-temperature-ctrlr@18 {
94				compatible = "ti,amc6821";
95				reg = <0x18>;
96				cooling-min-state = <0>;
97				cooling-max-state = <9>;
98				#cooling-cells = <2>;
99			};
100		};
101
102		i2c@2 {
103			#address-cells = <1>;
104			#size-cells = <0>;
105			reg = <2>;
106
107			regulator@5c {
108				compatible = "lltc,ltc3882";
109				reg = <0x5c>;
110			};
111		};
112
113		i2c@3 {
114			#address-cells = <1>;
115			#size-cells = <0>;
116			reg = <3>;
117
118			temperature-sensor@48 {
119				compatible = "nxp,sa56004";
120				reg = <0x48>;
121				vcc-supply = <&sb_3v3>;
122			};
123		};
124	};
125};
126
127&i2c2 {
128	status = "okay";
129};
130
131&i2c4 {
132	status = "okay";
133
134	rtc@51 {
135		compatible = "nxp,pcf2129";
136		reg = <0x51>;
137		// IRQ10_B
138		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
139	};
140};
141
142&fspi {
143	status = "okay";
144
145	flash@0 {
146		#address-cells = <1>;
147		#size-cells = <1>;
148		compatible = "micron,m25p80";
149		m25p,fast-read;
150		spi-max-frequency = <50000000>;
151		reg = <0>;
152		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
153		spi-rx-bus-width = <8>;
154		spi-tx-bus-width = <1>;
155	};
156};
157
158&usb0 {
159	status = "okay";
160};
161
162&usb1 {
163	status = "okay";
164};
165