1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-2080A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2017-2020 NXP
7 *
8 * Abhimanyu Saini <abhimanyu.saini@nxp.com>
9 *
10 */
11
12#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
13#include <dt-bindings/thermal/thermal.h>
14#include <dt-bindings/interrupt-controller/arm-gic.h>
15
16/ {
17	compatible = "fsl,ls2080a";
18	interrupt-parent = <&gic>;
19	#address-cells = <2>;
20	#size-cells = <2>;
21
22	aliases {
23		crypto = &crypto;
24		rtc1 = &ftm_alarm0;
25		serial0 = &serial0;
26		serial1 = &serial1;
27		serial2 = &serial2;
28		serial3 = &serial3;
29	};
30
31	cpu: cpus {
32		#address-cells = <1>;
33		#size-cells = <0>;
34	};
35
36	memory@80000000 {
37		device_type = "memory";
38		reg = <0x00000000 0x80000000 0 0x80000000>;
39		      /* DRAM space - 1, size : 2 GB DRAM */
40	};
41
42	sysclk: sysclk {
43		compatible = "fixed-clock";
44		#clock-cells = <0>;
45		clock-frequency = <100000000>;
46		clock-output-names = "sysclk";
47	};
48
49	gic: interrupt-controller@6000000 {
50		compatible = "arm,gic-v3";
51		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
52			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
53			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
54			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
55			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
56		#interrupt-cells = <3>;
57		#address-cells = <2>;
58		#size-cells = <2>;
59		ranges;
60		interrupt-controller;
61		interrupts = <1 9 0x4>;
62
63		its: gic-its@6020000 {
64			compatible = "arm,gic-v3-its";
65			msi-controller;
66			reg = <0x0 0x6020000 0 0x20000>;
67		};
68	};
69
70	rstcr: syscon@1e60000 {
71		compatible = "fsl,ls2080a-rstcr", "syscon";
72		reg = <0x0 0x1e60000 0x0 0x4>;
73	};
74
75	reboot {
76		compatible ="syscon-reboot";
77		regmap = <&rstcr>;
78		offset = <0x0>;
79		mask = <0x2>;
80	};
81
82	thermal-zones {
83		ddr-controller1 {
84			polling-delay-passive = <1000>;
85			polling-delay = <5000>;
86			thermal-sensors = <&tmu 1>;
87
88			trips {
89				ddr-ctrler1-crit {
90					temperature = <95000>;
91					hysteresis = <2000>;
92					type = "critical";
93				};
94			};
95		};
96
97		ddr-controller2 {
98			polling-delay-passive = <1000>;
99			polling-delay = <5000>;
100			thermal-sensors = <&tmu 2>;
101
102			trips {
103				ddr-ctrler2-crit {
104					temperature = <95000>;
105					hysteresis = <2000>;
106					type = "critical";
107				};
108			};
109		};
110
111		ddr-controller3 {
112			polling-delay-passive = <1000>;
113			polling-delay = <5000>;
114			thermal-sensors = <&tmu 3>;
115
116			trips {
117				ddr-ctrler3-crit {
118					temperature = <95000>;
119					hysteresis = <2000>;
120					type = "critical";
121				};
122			};
123		};
124
125		core-cluster1 {
126			polling-delay-passive = <1000>;
127			polling-delay = <5000>;
128			thermal-sensors = <&tmu 4>;
129
130			trips {
131				core_cluster1_alert: core-cluster1-alert {
132					temperature = <85000>;
133					hysteresis = <2000>;
134					type = "passive";
135				};
136
137				core-cluster1-crit {
138					temperature = <95000>;
139					hysteresis = <2000>;
140					type = "critical";
141				};
142			};
143
144			cooling-maps {
145				map0 {
146					trip = <&core_cluster1_alert>;
147					cooling-device =
148						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
149						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
150				};
151			};
152		};
153
154		core-cluster2 {
155			polling-delay-passive = <1000>;
156			polling-delay = <5000>;
157			thermal-sensors = <&tmu 5>;
158
159			trips {
160				core_cluster2_alert: core-cluster2-alert {
161					temperature = <85000>;
162					hysteresis = <2000>;
163					type = "passive";
164				};
165
166				core-cluster2-crit {
167					temperature = <95000>;
168					hysteresis = <2000>;
169					type = "critical";
170				};
171			};
172
173			cooling-maps {
174				map0 {
175					trip = <&core_cluster2_alert>;
176					cooling-device =
177						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
178						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
179				};
180			};
181		};
182
183		core-cluster3 {
184			polling-delay-passive = <1000>;
185			polling-delay = <5000>;
186			thermal-sensors = <&tmu 6>;
187
188			trips {
189				core_cluster3_alert: core-cluster3-alert {
190					temperature = <85000>;
191					hysteresis = <2000>;
192					type = "passive";
193				};
194
195				core-cluster3-crit {
196					temperature = <95000>;
197					hysteresis = <2000>;
198					type = "critical";
199				};
200			};
201
202			cooling-maps {
203				map0 {
204					trip = <&core_cluster3_alert>;
205					cooling-device =
206						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
207						<&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
208				};
209			};
210		};
211
212		core-cluster4 {
213			polling-delay-passive = <1000>;
214			polling-delay = <5000>;
215			thermal-sensors = <&tmu 7>;
216
217			trips {
218				core_cluster4_alert: core-cluster4-alert {
219					temperature = <85000>;
220					hysteresis = <2000>;
221					type = "passive";
222				};
223
224				core-cluster4-crit {
225					temperature = <95000>;
226					hysteresis = <2000>;
227					type = "critical";
228				};
229			};
230
231			cooling-maps {
232				map0 {
233					trip = <&core_cluster4_alert>;
234					cooling-device =
235						<&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
236						<&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
237				};
238			};
239		};
240	};
241
242	timer {
243		compatible = "arm,armv8-timer";
244		interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
245			     <1 14 4>, /* Physical Non-Secure PPI, active-low */
246			     <1 11 4>, /* Virtual PPI, active-low */
247			     <1 10 4>; /* Hypervisor PPI, active-low */
248		fsl,erratum-a008585;
249	};
250
251	pmu {
252		compatible = "arm,armv8-pmuv3";
253		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
254	};
255
256	psci {
257		compatible = "arm,psci-0.2";
258		method = "smc";
259	};
260
261	soc {
262		compatible = "simple-bus";
263		#address-cells = <2>;
264		#size-cells = <2>;
265		ranges;
266		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
267
268		clockgen: clocking@1300000 {
269			compatible = "fsl,ls2080a-clockgen";
270			reg = <0 0x1300000 0 0xa0000>;
271			#clock-cells = <2>;
272			clocks = <&sysclk>;
273		};
274
275		dcfg: dcfg@1e00000 {
276			compatible = "fsl,ls2080a-dcfg", "syscon";
277			reg = <0x0 0x1e00000 0x0 0x10000>;
278			little-endian;
279		};
280
281		isc: syscon@1f70000 {
282			compatible = "fsl,ls2080a-isc", "syscon";
283			reg = <0x0 0x1f70000 0x0 0x10000>;
284			little-endian;
285			#address-cells = <1>;
286			#size-cells = <1>;
287			ranges = <0x0 0x0 0x1f70000 0x10000>;
288
289			extirq: interrupt-controller@14 {
290				compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
291				#interrupt-cells = <2>;
292				#address-cells = <0>;
293				interrupt-controller;
294				reg = <0x14 4>;
295				interrupt-map =
296					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
297					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
298					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
299					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
300					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
301					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
302					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
303					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
304					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
305					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
306					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
307					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
308				interrupt-map-mask = <0xf 0x0>;
309			};
310		};
311
312		tmu: tmu@1f80000 {
313			compatible = "fsl,qoriq-tmu";
314			reg = <0x0 0x1f80000 0x0 0x10000>;
315			interrupts = <0 23 0x4>;
316			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
317			fsl,tmu-calibration = <0x00000000 0x00000026
318					       0x00000001 0x0000002d
319					       0x00000002 0x00000032
320					       0x00000003 0x00000039
321					       0x00000004 0x0000003f
322					       0x00000005 0x00000046
323					       0x00000006 0x0000004d
324					       0x00000007 0x00000054
325					       0x00000008 0x0000005a
326					       0x00000009 0x00000061
327					       0x0000000a 0x0000006a
328					       0x0000000b 0x00000071
329
330					       0x00010000 0x00000025
331					       0x00010001 0x0000002c
332					       0x00010002 0x00000035
333					       0x00010003 0x0000003d
334					       0x00010004 0x00000045
335					       0x00010005 0x0000004e
336					       0x00010006 0x00000057
337					       0x00010007 0x00000061
338					       0x00010008 0x0000006b
339					       0x00010009 0x00000076
340
341					       0x00020000 0x00000029
342					       0x00020001 0x00000033
343					       0x00020002 0x0000003d
344					       0x00020003 0x00000049
345					       0x00020004 0x00000056
346					       0x00020005 0x00000061
347					       0x00020006 0x0000006d
348
349					       0x00030000 0x00000021
350					       0x00030001 0x0000002a
351					       0x00030002 0x0000003c
352					       0x00030003 0x0000004e>;
353			little-endian;
354			#thermal-sensor-cells = <1>;
355		};
356
357		serial0: serial@21c0500 {
358			compatible = "fsl,ns16550", "ns16550a";
359			reg = <0x0 0x21c0500 0x0 0x100>;
360			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
361					    QORIQ_CLK_PLL_DIV(4)>;
362			interrupts = <0 32 0x4>; /* Level high type */
363		};
364
365		serial1: serial@21c0600 {
366			compatible = "fsl,ns16550", "ns16550a";
367			reg = <0x0 0x21c0600 0x0 0x100>;
368			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
369					    QORIQ_CLK_PLL_DIV(4)>;
370			interrupts = <0 32 0x4>; /* Level high type */
371		};
372
373		serial2: serial@21d0500 {
374			compatible = "fsl,ns16550", "ns16550a";
375			reg = <0x0 0x21d0500 0x0 0x100>;
376			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
377					    QORIQ_CLK_PLL_DIV(4)>;
378			interrupts = <0 33 0x4>; /* Level high type */
379		};
380
381		serial3: serial@21d0600 {
382			compatible = "fsl,ns16550", "ns16550a";
383			reg = <0x0 0x21d0600 0x0 0x100>;
384			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
385					    QORIQ_CLK_PLL_DIV(4)>;
386			interrupts = <0 33 0x4>; /* Level high type */
387		};
388
389		cluster1_core0_watchdog: wdt@c000000 {
390			compatible = "arm,sp805", "arm,primecell";
391			reg = <0x0 0xc000000 0x0 0x1000>;
392			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
393					    QORIQ_CLK_PLL_DIV(4)>,
394				 <&clockgen QORIQ_CLK_PLATFORM_PLL
395					    QORIQ_CLK_PLL_DIV(4)>;
396			clock-names = "wdog_clk", "apb_pclk";
397		};
398
399		cluster1_core1_watchdog: wdt@c010000 {
400			compatible = "arm,sp805", "arm,primecell";
401			reg = <0x0 0xc010000 0x0 0x1000>;
402			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
403					    QORIQ_CLK_PLL_DIV(4)>,
404				 <&clockgen QORIQ_CLK_PLATFORM_PLL
405					    QORIQ_CLK_PLL_DIV(4)>;
406			clock-names = "wdog_clk", "apb_pclk";
407		};
408
409		cluster2_core0_watchdog: wdt@c100000 {
410			compatible = "arm,sp805", "arm,primecell";
411			reg = <0x0 0xc100000 0x0 0x1000>;
412			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
413					    QORIQ_CLK_PLL_DIV(4)>,
414				 <&clockgen QORIQ_CLK_PLATFORM_PLL
415					    QORIQ_CLK_PLL_DIV(4)>;
416			clock-names = "wdog_clk", "apb_pclk";
417		};
418
419		cluster2_core1_watchdog: wdt@c110000 {
420			compatible = "arm,sp805", "arm,primecell";
421			reg = <0x0 0xc110000 0x0 0x1000>;
422			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
423					    QORIQ_CLK_PLL_DIV(4)>,
424				 <&clockgen QORIQ_CLK_PLATFORM_PLL
425					    QORIQ_CLK_PLL_DIV(4)>;
426			clock-names = "wdog_clk", "apb_pclk";
427		};
428
429		cluster3_core0_watchdog: wdt@c200000 {
430			compatible = "arm,sp805", "arm,primecell";
431			reg = <0x0 0xc200000 0x0 0x1000>;
432			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
433					    QORIQ_CLK_PLL_DIV(4)>,
434				 <&clockgen QORIQ_CLK_PLATFORM_PLL
435					    QORIQ_CLK_PLL_DIV(4)>;
436			clock-names = "wdog_clk", "apb_pclk";
437		};
438
439		cluster3_core1_watchdog: wdt@c210000 {
440			compatible = "arm,sp805", "arm,primecell";
441			reg = <0x0 0xc210000 0x0 0x1000>;
442			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
443					    QORIQ_CLK_PLL_DIV(4)>,
444				 <&clockgen QORIQ_CLK_PLATFORM_PLL
445					    QORIQ_CLK_PLL_DIV(4)>;
446			clock-names = "wdog_clk", "apb_pclk";
447		};
448
449		cluster4_core0_watchdog: wdt@c300000 {
450			compatible = "arm,sp805", "arm,primecell";
451			reg = <0x0 0xc300000 0x0 0x1000>;
452			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
453					    QORIQ_CLK_PLL_DIV(4)>,
454				 <&clockgen QORIQ_CLK_PLATFORM_PLL
455					    QORIQ_CLK_PLL_DIV(4)>;
456			clock-names = "wdog_clk", "apb_pclk";
457		};
458
459		cluster4_core1_watchdog: wdt@c310000 {
460			compatible = "arm,sp805", "arm,primecell";
461			reg = <0x0 0xc310000 0x0 0x1000>;
462			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
463					    QORIQ_CLK_PLL_DIV(4)>,
464				 <&clockgen QORIQ_CLK_PLATFORM_PLL
465					    QORIQ_CLK_PLL_DIV(4)>;
466			clock-names = "wdog_clk", "apb_pclk";
467		};
468
469		crypto: crypto@8000000 {
470			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
471			fsl,sec-era = <8>;
472			#address-cells = <1>;
473			#size-cells = <1>;
474			ranges = <0x0 0x00 0x8000000 0x100000>;
475			reg = <0x00 0x8000000 0x0 0x100000>;
476			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
477			dma-coherent;
478
479			sec_jr0: jr@10000 {
480				compatible = "fsl,sec-v5.0-job-ring",
481					     "fsl,sec-v4.0-job-ring";
482				reg	   = <0x10000 0x10000>;
483				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
484			};
485
486			sec_jr1: jr@20000 {
487				compatible = "fsl,sec-v5.0-job-ring",
488					     "fsl,sec-v4.0-job-ring";
489				reg	   = <0x20000 0x10000>;
490				interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
491			};
492
493			sec_jr2: jr@30000 {
494				compatible = "fsl,sec-v5.0-job-ring",
495					     "fsl,sec-v4.0-job-ring";
496				reg	   = <0x30000 0x10000>;
497				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
498			};
499
500			sec_jr3: jr@40000 {
501				compatible = "fsl,sec-v5.0-job-ring",
502					     "fsl,sec-v4.0-job-ring";
503				reg	   = <0x40000 0x10000>;
504				interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
505			};
506		};
507
508		console@8340020 {
509			compatible = "fsl,dpaa2-console";
510			reg = <0x00000000 0x08340020 0 0x2>;
511		};
512
513		ptp-timer@8b95000 {
514			compatible = "fsl,dpaa2-ptp";
515			reg = <0x0 0x8b95000 0x0 0x100>;
516			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
517					    QORIQ_CLK_PLL_DIV(2)>;
518			little-endian;
519			fsl,extts-fifo;
520		};
521
522		emdio1: mdio@8b96000 {
523			compatible = "fsl,fman-memac-mdio";
524			reg = <0x0 0x8b96000 0x0 0x1000>;
525			little-endian;
526			#address-cells = <1>;
527			#size-cells = <0>;
528			status = "disabled";
529		};
530
531		emdio2: mdio@8b97000 {
532			compatible = "fsl,fman-memac-mdio";
533			reg = <0x0 0x8b97000 0x0 0x1000>;
534			little-endian;
535			#address-cells = <1>;
536			#size-cells = <0>;
537			status = "disabled";
538		};
539
540		pcs_mdio1: mdio@8c07000 {
541			compatible = "fsl,fman-memac-mdio";
542			reg = <0x0 0x8c07000 0x0 0x1000>;
543			little-endian;
544			#address-cells = <1>;
545			#size-cells = <0>;
546			status = "disabled";
547
548			pcs1: ethernet-phy@0 {
549				reg = <0>;
550			};
551		};
552
553		pcs_mdio2: mdio@8c0b000 {
554			compatible = "fsl,fman-memac-mdio";
555			reg = <0x0 0x8c0b000 0x0 0x1000>;
556			little-endian;
557			#address-cells = <1>;
558			#size-cells = <0>;
559			status = "disabled";
560
561			pcs2: ethernet-phy@0 {
562				reg = <0>;
563			};
564		};
565
566		pcs_mdio3: mdio@8c0f000 {
567			compatible = "fsl,fman-memac-mdio";
568			reg = <0x0 0x8c0f000 0x0 0x1000>;
569			little-endian;
570			#address-cells = <1>;
571			#size-cells = <0>;
572			status = "disabled";
573
574			pcs3: ethernet-phy@0 {
575				reg = <0>;
576			};
577		};
578
579		pcs_mdio4: mdio@8c13000 {
580			compatible = "fsl,fman-memac-mdio";
581			reg = <0x0 0x8c13000 0x0 0x1000>;
582			little-endian;
583			#address-cells = <1>;
584			#size-cells = <0>;
585			status = "disabled";
586
587			pcs4: ethernet-phy@0 {
588				reg = <0>;
589			};
590		};
591
592		pcs_mdio5: mdio@8c17000 {
593			compatible = "fsl,fman-memac-mdio";
594			reg = <0x0 0x8c17000 0x0 0x1000>;
595			little-endian;
596			#address-cells = <1>;
597			#size-cells = <0>;
598			status = "disabled";
599
600			pcs5: ethernet-phy@0 {
601				reg = <0>;
602			};
603		};
604
605		pcs_mdio6: mdio@8c1b000 {
606			compatible = "fsl,fman-memac-mdio";
607			reg = <0x0 0x8c1b000 0x0 0x1000>;
608			little-endian;
609			#address-cells = <1>;
610			#size-cells = <0>;
611			status = "disabled";
612
613			pcs6: ethernet-phy@0 {
614				reg = <0>;
615			};
616		};
617
618		pcs_mdio7: mdio@8c1f000 {
619			compatible = "fsl,fman-memac-mdio";
620			reg = <0x0 0x8c1f000 0x0 0x1000>;
621			little-endian;
622			#address-cells = <1>;
623			#size-cells = <0>;
624			status = "disabled";
625
626			pcs7: ethernet-phy@0 {
627				reg = <0>;
628			};
629		};
630
631		pcs_mdio8: mdio@8c23000 {
632			compatible = "fsl,fman-memac-mdio";
633			reg = <0x0 0x8c23000 0x0 0x1000>;
634			little-endian;
635			#address-cells = <1>;
636			#size-cells = <0>;
637			status = "disabled";
638
639			pcs8: ethernet-phy@0 {
640				reg = <0>;
641			};
642		};
643
644		pcs_mdio9: mdio@8c27000 {
645			compatible = "fsl,fman-memac-mdio";
646			reg = <0x0 0x8c27000 0x0 0x1000>;
647			little-endian;
648			#address-cells = <1>;
649			#size-cells = <0>;
650			status = "disabled";
651
652			pcs9: ethernet-phy@0 {
653				reg = <0>;
654			};
655		};
656
657		pcs_mdio10: mdio@8c2b000 {
658			compatible = "fsl,fman-memac-mdio";
659			reg = <0x0 0x8c2b000 0x0 0x1000>;
660			little-endian;
661			#address-cells = <1>;
662			#size-cells = <0>;
663			status = "disabled";
664
665			pcs10: ethernet-phy@0 {
666				reg = <0>;
667			};
668		};
669
670		pcs_mdio11: mdio@8c2f000 {
671			compatible = "fsl,fman-memac-mdio";
672			reg = <0x0 0x8c2f000 0x0 0x1000>;
673			little-endian;
674			#address-cells = <1>;
675			#size-cells = <0>;
676			status = "disabled";
677
678			pcs11: ethernet-phy@0 {
679				reg = <0>;
680			};
681		};
682
683		pcs_mdio12: mdio@8c33000 {
684			compatible = "fsl,fman-memac-mdio";
685			reg = <0x0 0x8c33000 0x0 0x1000>;
686			little-endian;
687			#address-cells = <1>;
688			#size-cells = <0>;
689			status = "disabled";
690
691			pcs12: ethernet-phy@0 {
692				reg = <0>;
693			};
694		};
695
696		pcs_mdio13: mdio@8c37000 {
697			compatible = "fsl,fman-memac-mdio";
698			reg = <0x0 0x8c37000 0x0 0x1000>;
699			little-endian;
700			#address-cells = <1>;
701			#size-cells = <0>;
702			status = "disabled";
703
704			pcs13: ethernet-phy@0 {
705				reg = <0>;
706			};
707		};
708
709		pcs_mdio14: mdio@8c3b000 {
710			compatible = "fsl,fman-memac-mdio";
711			reg = <0x0 0x8c3b000 0x0 0x1000>;
712			little-endian;
713			#address-cells = <1>;
714			#size-cells = <0>;
715			status = "disabled";
716
717			pcs14: ethernet-phy@0 {
718				reg = <0>;
719			};
720		};
721
722		pcs_mdio15: mdio@8c3f000 {
723			compatible = "fsl,fman-memac-mdio";
724			reg = <0x0 0x8c3f000 0x0 0x1000>;
725			little-endian;
726			#address-cells = <1>;
727			#size-cells = <0>;
728			status = "disabled";
729
730			pcs15: ethernet-phy@0 {
731				reg = <0>;
732			};
733		};
734
735		pcs_mdio16: mdio@8c43000 {
736			compatible = "fsl,fman-memac-mdio";
737			reg = <0x0 0x8c43000 0x0 0x1000>;
738			little-endian;
739			#address-cells = <1>;
740			#size-cells = <0>;
741			status = "disabled";
742
743			pcs16: ethernet-phy@0 {
744				reg = <0>;
745			};
746		};
747
748		fsl_mc: fsl-mc@80c000000 {
749			compatible = "fsl,qoriq-mc";
750			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
751			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
752			msi-parent = <&its>;
753			iommu-map = <0 &smmu 0 0>;	/* This is fixed-up by u-boot */
754			dma-coherent;
755			#address-cells = <3>;
756			#size-cells = <1>;
757
758			/*
759			 * Region type 0x0 - MC portals
760			 * Region type 0x1 - QBMAN portals
761			 */
762			ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
763				  0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
764
765			/*
766			 * Define the maximum number of MACs present on the SoC.
767			 */
768			dpmacs {
769				#address-cells = <1>;
770				#size-cells = <0>;
771
772				dpmac1: ethernet@1 {
773					compatible = "fsl,qoriq-mc-dpmac";
774					reg = <0x1>;
775					pcs-handle = <&pcs1>;
776				};
777
778				dpmac2: ethernet@2 {
779					compatible = "fsl,qoriq-mc-dpmac";
780					reg = <0x2>;
781					pcs-handle = <&pcs2>;
782				};
783
784				dpmac3: ethernet@3 {
785					compatible = "fsl,qoriq-mc-dpmac";
786					reg = <0x3>;
787					pcs-handle = <&pcs3>;
788				};
789
790				dpmac4: ethernet@4 {
791					compatible = "fsl,qoriq-mc-dpmac";
792					reg = <0x4>;
793					pcs-handle = <&pcs4>;
794				};
795
796				dpmac5: ethernet@5 {
797					compatible = "fsl,qoriq-mc-dpmac";
798					reg = <0x5>;
799					pcs-handle = <&pcs5>;
800				};
801
802				dpmac6: ethernet@6 {
803					compatible = "fsl,qoriq-mc-dpmac";
804					reg = <0x6>;
805					pcs-handle = <&pcs6>;
806				};
807
808				dpmac7: ethernet@7 {
809					compatible = "fsl,qoriq-mc-dpmac";
810					reg = <0x7>;
811					pcs-handle = <&pcs7>;
812				};
813
814				dpmac8: ethernet@8 {
815					compatible = "fsl,qoriq-mc-dpmac";
816					reg = <0x8>;
817					pcs-handle = <&pcs8>;
818				};
819
820				dpmac9: ethernet@9 {
821					compatible = "fsl,qoriq-mc-dpmac";
822					reg = <0x9>;
823					pcs-handle = <&pcs9>;
824				};
825
826				dpmac10: ethernet@a {
827					compatible = "fsl,qoriq-mc-dpmac";
828					reg = <0xa>;
829					pcs-handle = <&pcs10>;
830				};
831
832				dpmac11: ethernet@b {
833					compatible = "fsl,qoriq-mc-dpmac";
834					reg = <0xb>;
835					pcs-handle = <&pcs11>;
836				};
837
838				dpmac12: ethernet@c {
839					compatible = "fsl,qoriq-mc-dpmac";
840					reg = <0xc>;
841					pcs-handle = <&pcs12>;
842				};
843
844				dpmac13: ethernet@d {
845					compatible = "fsl,qoriq-mc-dpmac";
846					reg = <0xd>;
847					pcs-handle = <&pcs13>;
848				};
849
850				dpmac14: ethernet@e {
851					compatible = "fsl,qoriq-mc-dpmac";
852					reg = <0xe>;
853					pcs-handle = <&pcs14>;
854				};
855
856				dpmac15: ethernet@f {
857					compatible = "fsl,qoriq-mc-dpmac";
858					reg = <0xf>;
859					pcs-handle = <&pcs15>;
860				};
861
862				dpmac16: ethernet@10 {
863					compatible = "fsl,qoriq-mc-dpmac";
864					reg = <0x10>;
865					pcs-handle = <&pcs16>;
866				};
867			};
868		};
869
870		smmu: iommu@5000000 {
871			compatible = "arm,mmu-500";
872			reg = <0 0x5000000 0 0x800000>;
873			#global-interrupts = <12>;
874			#iommu-cells = <1>;
875			stream-match-mask = <0x7C00>;
876			dma-coherent;
877			interrupts = <0 13 4>, /* global secure fault */
878				     <0 14 4>, /* combined secure interrupt */
879				     <0 15 4>, /* global non-secure fault */
880				     <0 16 4>, /* combined non-secure interrupt */
881				/* performance counter interrupts 0-7 */
882				     <0 211 4>, <0 212 4>,
883				     <0 213 4>, <0 214 4>,
884				     <0 215 4>, <0 216 4>,
885				     <0 217 4>, <0 218 4>,
886				/* per context interrupt, 64 interrupts */
887				     <0 146 4>, <0 147 4>,
888				     <0 148 4>, <0 149 4>,
889				     <0 150 4>, <0 151 4>,
890				     <0 152 4>, <0 153 4>,
891				     <0 154 4>, <0 155 4>,
892				     <0 156 4>, <0 157 4>,
893				     <0 158 4>, <0 159 4>,
894				     <0 160 4>, <0 161 4>,
895				     <0 162 4>, <0 163 4>,
896				     <0 164 4>, <0 165 4>,
897				     <0 166 4>, <0 167 4>,
898				     <0 168 4>, <0 169 4>,
899				     <0 170 4>, <0 171 4>,
900				     <0 172 4>, <0 173 4>,
901				     <0 174 4>, <0 175 4>,
902				     <0 176 4>, <0 177 4>,
903				     <0 178 4>, <0 179 4>,
904				     <0 180 4>, <0 181 4>,
905				     <0 182 4>, <0 183 4>,
906				     <0 184 4>, <0 185 4>,
907				     <0 186 4>, <0 187 4>,
908				     <0 188 4>, <0 189 4>,
909				     <0 190 4>, <0 191 4>,
910				     <0 192 4>, <0 193 4>,
911				     <0 194 4>, <0 195 4>,
912				     <0 196 4>, <0 197 4>,
913				     <0 198 4>, <0 199 4>,
914				     <0 200 4>, <0 201 4>,
915				     <0 202 4>, <0 203 4>,
916				     <0 204 4>, <0 205 4>,
917				     <0 206 4>, <0 207 4>,
918				     <0 208 4>, <0 209 4>;
919		};
920
921		dspi: spi@2100000 {
922			status = "disabled";
923			compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
924			#address-cells = <1>;
925			#size-cells = <0>;
926			reg = <0x0 0x2100000 0x0 0x10000>;
927			interrupts = <0 26 0x4>; /* Level high type */
928			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
929					    QORIQ_CLK_PLL_DIV(4)>;
930			clock-names = "dspi";
931			spi-num-chipselects = <5>;
932		};
933
934		esdhc: esdhc@2140000 {
935			status = "disabled";
936			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
937			reg = <0x0 0x2140000 0x0 0x10000>;
938			interrupts = <0 28 0x4>; /* Level high type */
939			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
940					    QORIQ_CLK_PLL_DIV(2)>;
941			voltage-ranges = <1800 1800 3300 3300>;
942			sdhci,auto-cmd12;
943			little-endian;
944			bus-width = <4>;
945		};
946
947		gpio0: gpio@2300000 {
948			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
949			reg = <0x0 0x2300000 0x0 0x10000>;
950			interrupts = <0 36 0x4>; /* Level high type */
951			gpio-controller;
952			little-endian;
953			#gpio-cells = <2>;
954			interrupt-controller;
955			#interrupt-cells = <2>;
956		};
957
958		gpio1: gpio@2310000 {
959			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
960			reg = <0x0 0x2310000 0x0 0x10000>;
961			interrupts = <0 36 0x4>; /* Level high type */
962			gpio-controller;
963			little-endian;
964			#gpio-cells = <2>;
965			interrupt-controller;
966			#interrupt-cells = <2>;
967		};
968
969		gpio2: gpio@2320000 {
970			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
971			reg = <0x0 0x2320000 0x0 0x10000>;
972			interrupts = <0 37 0x4>; /* Level high type */
973			gpio-controller;
974			little-endian;
975			#gpio-cells = <2>;
976			interrupt-controller;
977			#interrupt-cells = <2>;
978		};
979
980		gpio3: gpio@2330000 {
981			compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
982			reg = <0x0 0x2330000 0x0 0x10000>;
983			interrupts = <0 37 0x4>; /* Level high type */
984			gpio-controller;
985			little-endian;
986			#gpio-cells = <2>;
987			interrupt-controller;
988			#interrupt-cells = <2>;
989		};
990
991		i2c0: i2c@2000000 {
992			status = "disabled";
993			compatible = "fsl,vf610-i2c";
994			#address-cells = <1>;
995			#size-cells = <0>;
996			reg = <0x0 0x2000000 0x0 0x10000>;
997			interrupts = <0 34 0x4>; /* Level high type */
998			clock-names = "i2c";
999			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1000					    QORIQ_CLK_PLL_DIV(4)>;
1001		};
1002
1003		i2c1: i2c@2010000 {
1004			status = "disabled";
1005			compatible = "fsl,vf610-i2c";
1006			#address-cells = <1>;
1007			#size-cells = <0>;
1008			reg = <0x0 0x2010000 0x0 0x10000>;
1009			interrupts = <0 34 0x4>; /* Level high type */
1010			clock-names = "i2c";
1011			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1012					    QORIQ_CLK_PLL_DIV(4)>;
1013		};
1014
1015		i2c2: i2c@2020000 {
1016			status = "disabled";
1017			compatible = "fsl,vf610-i2c";
1018			#address-cells = <1>;
1019			#size-cells = <0>;
1020			reg = <0x0 0x2020000 0x0 0x10000>;
1021			interrupts = <0 35 0x4>; /* Level high type */
1022			clock-names = "i2c";
1023			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1024					    QORIQ_CLK_PLL_DIV(4)>;
1025		};
1026
1027		i2c3: i2c@2030000 {
1028			status = "disabled";
1029			compatible = "fsl,vf610-i2c";
1030			#address-cells = <1>;
1031			#size-cells = <0>;
1032			reg = <0x0 0x2030000 0x0 0x10000>;
1033			interrupts = <0 35 0x4>; /* Level high type */
1034			clock-names = "i2c";
1035			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1036					    QORIQ_CLK_PLL_DIV(4)>;
1037		};
1038
1039		ifc: memory-controller@2240000 {
1040			compatible = "fsl,ifc";
1041			reg = <0x0 0x2240000 0x0 0x20000>;
1042			interrupts = <0 21 0x4>; /* Level high type */
1043			little-endian;
1044			#address-cells = <2>;
1045			#size-cells = <1>;
1046
1047			ranges = <0 0 0x5 0x80000000 0x08000000
1048				  2 0 0x5 0x30000000 0x00010000
1049				  3 0 0x5 0x20000000 0x00010000>;
1050		};
1051
1052		qspi: spi@20c0000 {
1053			compatible = "fsl,ls2080a-qspi";
1054			#address-cells = <1>;
1055			#size-cells = <0>;
1056			reg = <0x0 0x20c0000 0x0 0x10000>,
1057			      <0x0 0x20000000 0x0 0x10000000>;
1058			reg-names = "QuadSPI", "QuadSPI-memory";
1059			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
1060			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1061					    QORIQ_CLK_PLL_DIV(4)>,
1062				 <&clockgen QORIQ_CLK_PLATFORM_PLL
1063					    QORIQ_CLK_PLL_DIV(4)>;
1064			clock-names = "qspi_en", "qspi";
1065			status = "disabled";
1066		};
1067
1068		pcie1: pcie@3400000 {
1069			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
1070			reg-names = "regs", "config";
1071			interrupts = <0 108 0x4>; /* Level high type */
1072			interrupt-names = "intr";
1073			#address-cells = <3>;
1074			#size-cells = <2>;
1075			device_type = "pci";
1076			dma-coherent;
1077			num-viewport = <6>;
1078			bus-range = <0x0 0xff>;
1079			msi-parent = <&its>;
1080			#interrupt-cells = <1>;
1081			interrupt-map-mask = <0 0 0 7>;
1082			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
1083					<0000 0 0 2 &gic 0 0 0 110 4>,
1084					<0000 0 0 3 &gic 0 0 0 111 4>,
1085					<0000 0 0 4 &gic 0 0 0 112 4>;
1086			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
1087			status = "disabled";
1088		};
1089
1090		pcie2: pcie@3500000 {
1091			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
1092			reg-names = "regs", "config";
1093			interrupts = <0 113 0x4>; /* Level high type */
1094			interrupt-names = "intr";
1095			#address-cells = <3>;
1096			#size-cells = <2>;
1097			device_type = "pci";
1098			dma-coherent;
1099			num-viewport = <6>;
1100			bus-range = <0x0 0xff>;
1101			msi-parent = <&its>;
1102			#interrupt-cells = <1>;
1103			interrupt-map-mask = <0 0 0 7>;
1104			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
1105					<0000 0 0 2 &gic 0 0 0 115 4>,
1106					<0000 0 0 3 &gic 0 0 0 116 4>,
1107					<0000 0 0 4 &gic 0 0 0 117 4>;
1108			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
1109			status = "disabled";
1110		};
1111
1112		pcie3: pcie@3600000 {
1113			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
1114			reg-names = "regs", "config";
1115			interrupts = <0 118 0x4>; /* Level high type */
1116			interrupt-names = "intr";
1117			#address-cells = <3>;
1118			#size-cells = <2>;
1119			device_type = "pci";
1120			dma-coherent;
1121			num-viewport = <256>;
1122			bus-range = <0x0 0xff>;
1123			msi-parent = <&its>;
1124			#interrupt-cells = <1>;
1125			interrupt-map-mask = <0 0 0 7>;
1126			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
1127					<0000 0 0 2 &gic 0 0 0 120 4>,
1128					<0000 0 0 3 &gic 0 0 0 121 4>,
1129					<0000 0 0 4 &gic 0 0 0 122 4>;
1130			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
1131			status = "disabled";
1132		};
1133
1134		pcie4: pcie@3700000 {
1135			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
1136			reg-names = "regs", "config";
1137			interrupts = <0 123 0x4>; /* Level high type */
1138			interrupt-names = "intr";
1139			#address-cells = <3>;
1140			#size-cells = <2>;
1141			device_type = "pci";
1142			dma-coherent;
1143			num-viewport = <6>;
1144			bus-range = <0x0 0xff>;
1145			msi-parent = <&its>;
1146			#interrupt-cells = <1>;
1147			interrupt-map-mask = <0 0 0 7>;
1148			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
1149					<0000 0 0 2 &gic 0 0 0 125 4>,
1150					<0000 0 0 3 &gic 0 0 0 126 4>,
1151					<0000 0 0 4 &gic 0 0 0 127 4>;
1152			iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
1153			status = "disabled";
1154		};
1155
1156		sata0: sata@3200000 {
1157			status = "disabled";
1158			compatible = "fsl,ls2080a-ahci";
1159			reg = <0x0 0x3200000 0x0 0x10000>;
1160			interrupts = <0 133 0x4>; /* Level high type */
1161			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1162					    QORIQ_CLK_PLL_DIV(4)>;
1163			dma-coherent;
1164		};
1165
1166		sata1: sata@3210000 {
1167			status = "disabled";
1168			compatible = "fsl,ls2080a-ahci";
1169			reg = <0x0 0x3210000 0x0 0x10000>;
1170			interrupts = <0 136 0x4>; /* Level high type */
1171			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
1172					    QORIQ_CLK_PLL_DIV(4)>;
1173			dma-coherent;
1174		};
1175
1176		usb0: usb@3100000 {
1177			status = "disabled";
1178			compatible = "snps,dwc3";
1179			reg = <0x0 0x3100000 0x0 0x10000>;
1180			interrupts = <0 80 0x4>; /* Level high type */
1181			dr_mode = "host";
1182			snps,quirk-frame-length-adjustment = <0x20>;
1183			snps,dis_rxdet_inp3_quirk;
1184			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
1185		};
1186
1187		usb1: usb@3110000 {
1188			status = "disabled";
1189			compatible = "snps,dwc3";
1190			reg = <0x0 0x3110000 0x0 0x10000>;
1191			interrupts = <0 81 0x4>; /* Level high type */
1192			dr_mode = "host";
1193			snps,quirk-frame-length-adjustment = <0x20>;
1194			snps,dis_rxdet_inp3_quirk;
1195			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
1196		};
1197
1198		ccn@4000000 {
1199			compatible = "arm,ccn-504";
1200			reg = <0x0 0x04000000 0x0 0x01000000>;
1201			interrupts = <0 12 4>;
1202		};
1203
1204		rcpm: power-controller@1e34040 {
1205			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
1206			reg = <0x0 0x1e34040 0x0 0x18>;
1207			#fsl,rcpm-wakeup-cells = <6>;
1208			little-endian;
1209		};
1210
1211		ftm_alarm0: timer@2800000 {
1212			compatible = "fsl,ls208xa-ftm-alarm";
1213			reg = <0x0 0x2800000 0x0 0x10000>;
1214			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
1215			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
1216		};
1217	};
1218
1219	ddr1: memory-controller@1080000 {
1220		compatible = "fsl,qoriq-memory-controller";
1221		reg = <0x0 0x1080000 0x0 0x1000>;
1222		interrupts = <0 17 0x4>;
1223		little-endian;
1224	};
1225
1226	ddr2: memory-controller@1090000 {
1227		compatible = "fsl,qoriq-memory-controller";
1228		reg = <0x0 0x1090000 0x0 0x1000>;
1229		interrupts = <0 18 0x4>;
1230		little-endian;
1231	};
1232
1233	firmware {
1234		optee {
1235			compatible = "linaro,optee-tz";
1236			method = "smc";
1237		};
1238	};
1239};
1240