1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for Travese Ten64 (LS1088) board
4 * Based on fsl-ls1088a-rdb.dts
5 * Copyright 2017-2020 NXP
6 * Copyright 2019-2021 Traverse Technologies
7 *
8 * Author: Mathew McBride <matt@traverse.com.au>
9 */
10
11/dts-v1/;
12
13#include "fsl-ls1088a.dtsi"
14
15#include <dt-bindings/gpio/gpio.h>
16#include <dt-bindings/input/input.h>
17
18/ {
19	model = "Traverse Ten64";
20	compatible = "traverse,ten64", "fsl,ls1088a";
21
22	aliases {
23		serial0 = &duart0;
24		serial1 = &duart1;
25	};
26
27	chosen {
28		stdout-path = "serial0:115200n8";
29	};
30
31	buttons {
32		compatible = "gpio-keys";
33
34		/* Fired by system controller when
35		 * external power off (e.g ATX Power Button)
36		 * asserted
37		 */
38		button-powerdn {
39			label = "External Power Down";
40			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
41			linux,code = <KEY_POWER>;
42		};
43
44		/* Rear Panel 'ADMIN' button (GPIO_H) */
45		button-admin {
46			label = "ADMIN button";
47			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
48			linux,code = <KEY_WPS_BUTTON>;
49		};
50	};
51
52	leds {
53		compatible = "gpio-leds";
54
55		led-0 {
56			label = "ten64:green:sfp1:down";
57			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
58		};
59
60		led-1 {
61			label = "ten64:green:sfp2:up";
62			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
63		};
64
65		led-2 {
66			label = "ten64:admin";
67			gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
68		};
69	};
70
71	sfp_xg0: dpmac2-sfp {
72		compatible = "sff,sfp";
73		i2c-bus = <&sfplower_i2c>;
74		tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>;
75		tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>;
76		mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>;
77		los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>;
78		maximum-power-milliwatt = <2000>;
79	};
80
81	sfp_xg1: dpmac1-sfp {
82		compatible = "sff,sfp";
83		i2c-bus = <&sfpupper_i2c>;
84		tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>;
85		tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>;
86		mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>;
87		los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>;
88		maximum-power-milliwatt = <2000>;
89	};
90};
91
92/* XG1 - Upper SFP */
93&dpmac1 {
94	sfp = <&sfp_xg1>;
95	pcs-handle = <&pcs1>;
96	phy-connection-type = "10gbase-r";
97	managed = "in-band-status";
98};
99
100/* XG0 - Lower SFP */
101&dpmac2 {
102	sfp = <&sfp_xg0>;
103	pcs-handle = <&pcs2>;
104	phy-connection-type = "10gbase-r";
105	managed = "in-band-status";
106};
107
108/* DPMAC3..6 is GE4 to GE8 */
109&dpmac3 {
110	phy-handle = <&mdio1_phy5>;
111	phy-connection-type = "qsgmii";
112	managed = "in-band-status";
113	pcs-handle = <&pcs3_0>;
114};
115
116&dpmac4 {
117	phy-handle = <&mdio1_phy6>;
118	phy-connection-type = "qsgmii";
119	managed = "in-band-status";
120	pcs-handle = <&pcs3_1>;
121};
122
123&dpmac5 {
124	phy-handle = <&mdio1_phy7>;
125	phy-connection-type = "qsgmii";
126	managed = "in-band-status";
127	pcs-handle = <&pcs3_2>;
128};
129
130&dpmac6 {
131	phy-handle = <&mdio1_phy8>;
132	phy-connection-type = "qsgmii";
133	managed = "in-band-status";
134	pcs-handle = <&pcs3_3>;
135};
136
137/* DPMAC7..10 is GE0 to GE3 */
138&dpmac7 {
139	phy-handle = <&mdio1_phy1>;
140	phy-connection-type = "qsgmii";
141	managed = "in-band-status";
142	pcs-handle = <&pcs7_0>;
143};
144
145&dpmac8 {
146	phy-handle = <&mdio1_phy2>;
147	phy-connection-type = "qsgmii";
148	managed = "in-band-status";
149	pcs-handle = <&pcs7_1>;
150};
151
152&dpmac9 {
153	phy-handle = <&mdio1_phy3>;
154	phy-connection-type = "qsgmii";
155	managed = "in-band-status";
156	pcs-handle = <&pcs7_2>;
157};
158
159&dpmac10 {
160	phy-handle = <&mdio1_phy4>;
161	phy-connection-type = "qsgmii";
162	managed = "in-band-status";
163	pcs-handle = <&pcs7_3>;
164};
165
166&duart0 {
167	status = "okay";
168};
169
170&duart1 {
171	status = "okay";
172};
173
174&emdio1 {
175	status = "okay";
176
177	mdio1_phy5: ethernet-phy@c {
178		reg = <0xc>;
179	};
180
181	mdio1_phy6: ethernet-phy@d {
182		reg = <0xd>;
183	};
184
185	mdio1_phy7: ethernet-phy@e {
186		reg = <0xe>;
187	};
188
189	mdio1_phy8: ethernet-phy@f {
190		reg = <0xf>;
191	};
192
193	mdio1_phy1: ethernet-phy@1c {
194		reg = <0x1c>;
195	};
196
197	mdio1_phy2: ethernet-phy@1d {
198		reg = <0x1d>;
199	};
200
201	mdio1_phy3: ethernet-phy@1e {
202		reg = <0x1e>;
203	};
204
205	mdio1_phy4: ethernet-phy@1f {
206		reg = <0x1f>;
207	};
208};
209
210&esdhc {
211	status = "okay";
212};
213
214&i2c0 {
215	status = "okay";
216
217	sfpgpio: gpio@76 {
218		compatible = "ti,tca9539";
219		reg = <0x76>;
220		#gpio-cells = <2>;
221		gpio-controller;
222
223		admin_led_lower {
224			gpio-hog;
225			gpios = <13 GPIO_ACTIVE_HIGH>;
226			output-low;
227		};
228	};
229
230	at97sc: tpm@29 {
231		compatible = "atmel,at97sc3204t";
232		reg = <0x29>;
233	};
234};
235
236&i2c2 {
237	status = "okay";
238
239	rx8035: rtc@32 {
240		compatible = "epson,rx8035";
241		reg = <0x32>;
242	};
243};
244
245&i2c3 {
246	status = "okay";
247
248	i2c-mux@70 {
249		compatible = "nxp,pca9540";
250		#address-cells = <1>;
251		#size-cells = <0>;
252		reg = <0x70>;
253
254		sfpupper_i2c: i2c@0 {
255			#address-cells = <1>;
256			#size-cells = <0>;
257			reg = <0>;
258		};
259
260		sfplower_i2c: i2c@1 {
261			#address-cells = <1>;
262			#size-cells = <0>;
263			reg = <1>;
264		};
265	};
266};
267
268&pcs_mdio1 {
269	status = "okay";
270};
271
272&pcs_mdio2 {
273	status = "okay";
274};
275
276&pcs_mdio3 {
277	status = "okay";
278};
279
280&pcs_mdio7 {
281	status = "okay";
282};
283
284&qspi {
285	status = "okay";
286
287	en25s64: flash@0 {
288		compatible = "jedec,spi-nor";
289		#address-cells = <1>;
290		#size-cells = <1>;
291		reg = <0>;
292		spi-max-frequency = <20000000>;
293		spi-rx-bus-width = <4>;
294		spi-tx-bus-width = <4>;
295
296		partitions {
297			compatible = "fixed-partitions";
298			#address-cells = <1>;
299			#size-cells = <1>;
300
301			partition@0 {
302				label = "bl2";
303				reg = <0 0x100000>;
304			};
305
306			partition@100000 {
307				label = "bl3";
308				reg = <0x100000 0x200000>;
309			};
310
311			partition@300000 {
312				label = "mcfirmware";
313				reg = <0x300000 0x200000>;
314			};
315
316			partition@500000 {
317				label = "ubootenv";
318				reg = <0x500000 0x80000>;
319			};
320
321			partition@580000 {
322				label = "dpl";
323				reg = <0x580000 0x40000>;
324			};
325
326			partition@5C0000 {
327				label = "dpc";
328				reg = <0x5C0000 0x40000>;
329			};
330
331			partition@600000 {
332				label = "devicetree";
333				reg = <0x600000 0x40000>;
334			};
335		};
336	};
337
338	nand: flash@1 {
339		compatible = "spi-nand";
340		#address-cells = <1>;
341		#size-cells = <1>;
342		reg = <1>;
343		spi-max-frequency = <20000000>;
344		spi-rx-bus-width = <4>;
345		spi-tx-bus-width = <4>;
346
347		partitions {
348			compatible = "fixed-partitions";
349			#address-cells = <1>;
350			#size-cells = <1>;
351
352			/* reserved for future boot direct from NAND flash
353			 * (this would use the same layout as the 8MiB NOR flash)
354			 */
355			partition@0 {
356				label = "nand-boot-reserved";
357				reg = <0 0x800000>;
358			};
359
360			/* recovery / install environment */
361			partition@800000 {
362				label = "recovery";
363				reg = <0x800000 0x2000000>;
364			};
365
366			/* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */
367			partition@2800000 {
368				label = "ubia";
369				reg = <0x2800000 0x6C00000>;
370			};
371
372			/* ubib (second OpenWrt) */
373			partition@9400000 {
374				label = "ubib";
375				reg = <0x9400000 0x6C00000>;
376			};
377		};
378	};
379};
380
381&usb0 {
382	status = "okay";
383};
384
385&usb1 {
386	status = "okay";
387};
388