1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Device Tree file for NXP LS1088A RDB Board. 4 * 5 * Copyright 2017 NXP 6 * 7 * Harninder Rai <harninder.rai@nxp.com> 8 * 9 */ 10 11/dts-v1/; 12 13#include "fsl-ls1088a.dtsi" 14 15/ { 16 model = "LS1088A RDB Board"; 17 compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; 18}; 19 20&i2c0 { 21 status = "okay"; 22 23 i2c-switch@77 { 24 compatible = "nxp,pca9547"; 25 reg = <0x77>; 26 #address-cells = <1>; 27 #size-cells = <0>; 28 29 i2c@2 { 30 #address-cells = <1>; 31 #size-cells = <0>; 32 reg = <0x2>; 33 34 ina220@40 { 35 compatible = "ti,ina220"; 36 reg = <0x40>; 37 shunt-resistor = <1000>; 38 }; 39 }; 40 41 i2c@3 { 42 #address-cells = <1>; 43 #size-cells = <0>; 44 reg = <0x3>; 45 46 temp-sensor@4c { 47 compatible = "adi,adt7461a"; 48 reg = <0x4c>; 49 }; 50 51 rtc@51 { 52 compatible = "nxp,pcf2129"; 53 reg = <0x51>; 54 /* IRQ10_B */ 55 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; 56 }; 57 }; 58 }; 59}; 60 61&ifc { 62 ranges = <0 0 0x5 0x30000000 0x00010000 63 2 0 0x5 0x20000000 0x00010000>; 64 status = "okay"; 65 66 nand@0,0 { 67 compatible = "fsl,ifc-nand"; 68 reg = <0x0 0x0 0x10000>; 69 }; 70 71 fpga: board-control@2,0 { 72 compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; 73 reg = <0x2 0x0 0x0000100>; 74 }; 75}; 76 77&duart0 { 78 status = "okay"; 79}; 80 81&duart1 { 82 status = "okay"; 83}; 84 85&esdhc { 86 status = "okay"; 87}; 88 89&sata { 90 status = "okay"; 91}; 92 93&usb0 { 94 status = "okay"; 95}; 96 97&usb1 { 98 dr_mode = "otg"; 99 status = "okay"; 100}; 101