1/* 2 * Device Tree file for NXP LS1088A RDB Board. 3 * 4 * Copyright 2017 NXP 5 * 6 * Harninder Rai <harninder.rai@nxp.com> 7 * 8 * This file is dual-licensed: you can use it either under the terms 9 * of the GPLv2 or the X11 license, at your option. Note that this dual 10 * licensing only applies to this file, and not this project as a 11 * whole. 12 * 13 * a) This library is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License as 15 * published by the Free Software Foundation; either version 2 of the 16 * License, or (at your option) any later version. 17 * 18 * This library is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * Or, alternatively, 24 * 25 * b) Permission is hereby granted, free of charge, to any person 26 * obtaining a copy of this software and associated documentation 27 * files (the "Software"), to deal in the Software without 28 * restriction, including without limitation the rights to use, 29 * copy, modify, merge, publish, distribute, sublicense, and/or 30 * sell copies of the Software, and to permit persons to whom the 31 * Software is furnished to do so, subject to the following 32 * conditions: 33 * 34 * The above copyright notice and this permission notice shall be 35 * included in all copies or substantial portions of the Software. 36 * 37 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 38 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 39 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 40 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 41 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 42 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 43 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 44 * OTHER DEALINGS IN THE SOFTWARE. 45 */ 46 47/dts-v1/; 48 49#include "fsl-ls1088a.dtsi" 50 51/ { 52 model = "L1088A RDB Board"; 53 compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; 54}; 55 56&i2c0 { 57 status = "okay"; 58 59 i2c-switch@77 { 60 compatible = "nxp,pca9547"; 61 reg = <0x77>; 62 #address-cells = <1>; 63 #size-cells = <0>; 64 65 i2c@2 { 66 #address-cells = <1>; 67 #size-cells = <0>; 68 reg = <0x2>; 69 70 ina220@40 { 71 compatible = "ti,ina220"; 72 reg = <0x40>; 73 shunt-resistor = <1000>; 74 }; 75 }; 76 77 i2c@3 { 78 #address-cells = <1>; 79 #size-cells = <0>; 80 reg = <0x3>; 81 82 temp-sensor@4c { 83 compatible = "adi,adt7461a"; 84 reg = <0x4c>; 85 }; 86 87 rtc@51 { 88 compatible = "nxp,pcf2129"; 89 reg = <0x51>; 90 /* IRQ10_B */ 91 interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; 92 }; 93 }; 94 }; 95}; 96 97&ifc { 98 ranges = <0 0 0x5 0x30000000 0x00010000 99 2 0 0x5 0x20000000 0x00010000>; 100 status = "okay"; 101 102 nand@0,0 { 103 compatible = "fsl,ifc-nand"; 104 reg = <0x0 0x0 0x10000>; 105 }; 106 107 fpga: board-control@2,0 { 108 compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; 109 reg = <0x2 0x0 0x0000100>; 110 }; 111}; 112 113&duart0 { 114 status = "okay"; 115}; 116 117&duart1 { 118 status = "okay"; 119}; 120 121&esdhc { 122 status = "okay"; 123}; 124 125&sata { 126 status = "okay"; 127}; 128