1/*
2 * Device Tree file for NXP LS1088A QDS Board.
3 *
4 * Copyright 2017 NXP
5 *
6 * Harninder Rai <harninder.rai@nxp.com>
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPLv2 or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 *  a) This library is free software; you can redistribute it and/or
14 *     modify it under the terms of the GNU General Public License as
15 *     published by the Free Software Foundation; either version 2 of the
16 *     License, or (at your option) any later version.
17 *
18 *     This library is distributed in the hope that it will be useful,
19 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21 *     GNU General Public License for more details.
22 *
23 * Or, alternatively,
24 *
25 *  b) Permission is hereby granted, free of charge, to any person
26 *     obtaining a copy of this software and associated documentation
27 *     files (the "Software"), to deal in the Software without
28 *     restriction, including without limitation the rights to use,
29 *     copy, modify, merge, publish, distribute, sublicense, and/or
30 *     sell copies of the Software, and to permit persons to whom the
31 *     Software is furnished to do so, subject to the following
32 *     conditions:
33 *
34 *     The above copyright notice and this permission notice shall be
35 *     included in all copies or substantial portions of the Software.
36 *
37 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
38 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
42 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44 *     OTHER DEALINGS IN THE SOFTWARE.
45 */
46
47/dts-v1/;
48
49#include "fsl-ls1088a.dtsi"
50
51/ {
52	model = "LS1088A QDS Board";
53	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
54};
55
56&i2c0 {
57	status = "okay";
58
59	i2c-switch@77 {
60		compatible = "nxp,pca9547";
61		reg = <0x77>;
62		#address-cells = <1>;
63		#size-cells = <0>;
64
65		i2c@2 {
66			#address-cells = <1>;
67			#size-cells = <0>;
68			reg = <0x2>;
69
70			ina220@40 {
71				compatible = "ti,ina220";
72				reg = <0x40>;
73				shunt-resistor = <1000>;
74			};
75
76			ina220@41 {
77				compatible = "ti,ina220";
78				reg = <0x41>;
79				shunt-resistor = <1000>;
80			};
81		};
82
83		i2c@3 {
84			#address-cells = <1>;
85			#size-cells = <0>;
86			reg = <0x3>;
87
88			temp-sensor@4c {
89				compatible = "adi,adt7461a";
90				reg = <0x4c>;
91			};
92
93			rtc@51 {
94				compatible = "nxp,pcf2129";
95				reg = <0x51>;
96				/* IRQ10_B */
97				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
98			};
99
100			eeprom@56 {
101				compatible = "atmel,24c512";
102				reg = <0x56>;
103			};
104
105			eeprom@57 {
106				compatible = "atmel,24c512";
107				reg = <0x57>;
108			};
109		};
110	};
111};
112
113&ifc {
114	ranges = <0 0 0x5 0x80000000 0x08000000
115		  2 0 0x5 0x30000000 0x00010000
116		  3 0 0x5 0x20000000 0x00010000>;
117	status = "okay";
118
119	nor@0,0 {
120		compatible = "cfi-flash";
121		reg = <0x0 0x0 0x8000000>;
122		bank-width = <2>;
123		device-width = <1>;
124	};
125
126	nand@2,0 {
127		compatible = "fsl,ifc-nand";
128		reg = <0x2 0x0 0x10000>;
129	};
130
131	fpga: board-control@3,0 {
132		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
133		reg = <0x3 0x0 0x0000100>;
134	};
135};
136
137&duart0 {
138	status = "okay";
139};
140
141&duart1 {
142	status = "okay";
143};
144
145&esdhc {
146	status = "okay";
147};
148
149&sata {
150	status = "okay";
151};
152