1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree file for NXP LS1088A QDS Board.
4 *
5 * Copyright 2017 NXP
6 *
7 * Harninder Rai <harninder.rai@nxp.com>
8 *
9 */
10
11/dts-v1/;
12
13#include "fsl-ls1088a.dtsi"
14
15/ {
16	model = "LS1088A QDS Board";
17	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
18};
19
20&dspi {
21	bus-num = <0>;
22	status = "okay";
23
24	flash@0 {
25		#address-cells = <1>;
26		#size-cells = <1>;
27		compatible = "jedec,spi-nor";
28		reg = <0>;
29		spi-max-frequency = <1000000>;
30	};
31
32	flash@1 {
33		#address-cells = <1>;
34		#size-cells = <1>;
35		compatible = "jedec,spi-nor";
36		spi-cpol;
37		spi-cpha;
38		spi-max-frequency = <3500000>;
39		reg = <1>;
40	};
41
42	flash@2 {
43		#address-cells = <1>;
44		#size-cells = <1>;
45		compatible = "jedec,spi-nor";
46		spi-cpol;
47		spi-cpha;
48		spi-max-frequency = <3500000>;
49		reg = <2>;
50	};
51};
52
53&i2c0 {
54	status = "okay";
55
56	i2c-switch@77 {
57		compatible = "nxp,pca9547";
58		reg = <0x77>;
59		#address-cells = <1>;
60		#size-cells = <0>;
61
62		i2c@2 {
63			#address-cells = <1>;
64			#size-cells = <0>;
65			reg = <0x2>;
66
67			ina220@40 {
68				compatible = "ti,ina220";
69				reg = <0x40>;
70				shunt-resistor = <1000>;
71			};
72
73			ina220@41 {
74				compatible = "ti,ina220";
75				reg = <0x41>;
76				shunt-resistor = <1000>;
77			};
78		};
79
80		i2c@3 {
81			#address-cells = <1>;
82			#size-cells = <0>;
83			reg = <0x3>;
84
85			temp-sensor@4c {
86				compatible = "adi,adt7461a";
87				reg = <0x4c>;
88			};
89
90			rtc@51 {
91				compatible = "nxp,pcf2129";
92				reg = <0x51>;
93				/* IRQ10_B */
94				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
95			};
96
97			eeprom@56 {
98				compatible = "atmel,24c512";
99				reg = <0x56>;
100			};
101
102			eeprom@57 {
103				compatible = "atmel,24c512";
104				reg = <0x57>;
105			};
106		};
107	};
108};
109
110&ifc {
111	ranges = <0 0 0x5 0x80000000 0x08000000
112		  2 0 0x5 0x30000000 0x00010000
113		  3 0 0x5 0x20000000 0x00010000>;
114	status = "okay";
115
116	nor@0,0 {
117		compatible = "cfi-flash";
118		reg = <0x0 0x0 0x8000000>;
119		bank-width = <2>;
120		device-width = <1>;
121	};
122
123	nand@2,0 {
124		compatible = "fsl,ifc-nand";
125		reg = <0x2 0x0 0x10000>;
126	};
127
128	fpga: board-control@3,0 {
129		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
130		reg = <0x3 0x0 0x0000100>;
131	};
132};
133
134&duart0 {
135	status = "okay";
136};
137
138&duart1 {
139	status = "okay";
140};
141
142&esdhc {
143	status = "okay";
144};
145
146&sata {
147	status = "okay";
148};
149