1/*
2 * Device Tree Include file for Freescale Layerscape-1046A family SoC.
3 *
4 * Copyright 2016 Freescale Semiconductor, Inc.
5 *
6 * Mingkai Hu <mingkai.hu@nxp.com>
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPLv2 or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 *  a) This library is free software; you can redistribute it and/or
14 *     modify it under the terms of the GNU General Public License as
15 *     published by the Free Software Foundation; either version 2 of the
16 *     License, or (at your option) any later version.
17 *
18 *     This library is distributed in the hope that it will be useful,
19 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21 *     GNU General Public License for more details.
22 *
23 * Or, alternatively,
24 *
25 *  b) Permission is hereby granted, free of charge, to any person
26 *     obtaining a copy of this software and associated documentation
27 *     files (the "Software"), to deal in the Software without
28 *     restriction, including without limitation the rights to use,
29 *     copy, modify, merge, publish, distribute, sublicense, and/or
30 *     sell copies of the Software, and to permit persons to whom the
31 *     Software is furnished to do so, subject to the following
32 *     conditions:
33 *
34 *     The above copyright notice and this permission notice shall be
35 *     included in all copies or substantial portions of the Software.
36 *
37 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
38 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
42 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44 *     OTHER DEALINGS IN THE SOFTWARE.
45 */
46
47/dts-v1/;
48
49#include "fsl-ls1046a.dtsi"
50
51/ {
52	model = "LS1046A RDB Board";
53	compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
54
55	aliases {
56		serial0 = &duart0;
57		serial1 = &duart1;
58		serial2 = &duart2;
59		serial3 = &duart3;
60	};
61
62	chosen {
63		stdout-path = "serial0:115200n8";
64	};
65};
66
67&duart0 {
68	status = "okay";
69};
70
71&duart1 {
72	status = "okay";
73};
74
75&esdhc {
76	mmc-hs200-1_8v;
77	sd-uhs-sdr104;
78	sd-uhs-sdr50;
79	sd-uhs-sdr25;
80	sd-uhs-sdr12;
81};
82
83&i2c0 {
84	status = "okay";
85
86	ina220@40 {
87		compatible = "ti,ina220";
88		reg = <0x40>;
89		shunt-resistor = <1000>;
90	};
91
92	temp-sensor@4c {
93		compatible = "adi,adt7461";
94		reg = <0x4c>;
95	};
96
97	eeprom@56 {
98		compatible = "atmel,24c512";
99		reg = <0x52>;
100	};
101
102	eeprom@57 {
103		compatible = "atmel,24c512";
104		reg = <0x53>;
105	};
106};
107
108&i2c3 {
109	status = "okay";
110
111	rtc@51 {
112		compatible = "nxp,pcf2129";
113		reg = <0x51>;
114	};
115};
116
117&ifc {
118	#address-cells = <2>;
119	#size-cells = <1>;
120	/* NAND Flashe and CPLD on board */
121	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
122		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
123	status = "okay";
124
125	nand@0,0 {
126		compatible = "fsl,ifc-nand";
127		#address-cells = <1>;
128		#size-cells = <1>;
129		reg = <0x0 0x0 0x10000>;
130	};
131
132	cpld: board-control@2,0 {
133		compatible = "fsl,ls1046ardb-cpld";
134		reg = <0x2 0x0 0x0000100>;
135	};
136};
137
138&qspi {
139	num-cs = <2>;
140	bus-num = <0>;
141	status = "okay";
142
143	qflash0: s25fs512s@0 {
144		compatible = "spansion,m25p80";
145		#address-cells = <1>;
146		#size-cells = <1>;
147		spi-max-frequency = <20000000>;
148		reg = <0>;
149	};
150
151	qflash1: s25fs512s@1 {
152		compatible = "spansion,m25p80";
153		#address-cells = <1>;
154		#size-cells = <1>;
155		spi-max-frequency = <20000000>;
156		reg = <1>;
157	};
158};
159
160#include "fsl-ls1046-post.dtsi"
161
162&fman0 {
163	ethernet@e4000 {
164		phy-handle = <&rgmii_phy1>;
165		phy-connection-type = "rgmii";
166	};
167
168	ethernet@e6000 {
169		phy-handle = <&rgmii_phy2>;
170		phy-connection-type = "rgmii";
171	};
172
173	ethernet@e8000 {
174		phy-handle = <&sgmii_phy1>;
175		phy-connection-type = "sgmii";
176	};
177
178	ethernet@ea000 {
179		phy-handle = <&sgmii_phy2>;
180		phy-connection-type = "sgmii";
181	};
182
183	ethernet@f0000 { /* 10GEC1 */
184		phy-handle = <&aqr106_phy>;
185		phy-connection-type = "xgmii";
186	};
187
188	ethernet@f2000 { /* 10GEC2 */
189		fixed-link = <0 1 1000 0 0>;
190		phy-connection-type = "xgmii";
191	};
192
193	mdio@fc000 {
194		rgmii_phy1: ethernet-phy@1 {
195			reg = <0x1>;
196		};
197
198		rgmii_phy2: ethernet-phy@2 {
199			reg = <0x2>;
200		};
201
202		sgmii_phy1: ethernet-phy@3 {
203			reg = <0x3>;
204		};
205
206		sgmii_phy2: ethernet-phy@4 {
207			reg = <0x4>;
208		};
209	};
210
211	mdio@fd000 {
212		aqr106_phy: ethernet-phy@0 {
213			compatible = "ethernet-phy-ieee802.3-c45";
214			interrupts = <0 131 4>;
215			reg = <0x0>;
216		};
217	};
218};
219