1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-1046A family SoC.
4 *
5 * Copyright 2016 Freescale Semiconductor, Inc.
6 * Copyright 2018 NXP
7 *
8 * Shaohui Xie <Shaohui.Xie@nxp.com>
9 */
10
11/dts-v1/;
12
13#include "fsl-ls1046a.dtsi"
14
15/ {
16	model = "LS1046A QDS Board";
17	compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
18
19	aliases {
20		gpio0 = &gpio0;
21		gpio1 = &gpio1;
22		gpio2 = &gpio2;
23		gpio3 = &gpio3;
24		serial0 = &duart0;
25		serial1 = &duart1;
26		serial2 = &duart2;
27		serial3 = &duart3;
28	};
29
30	chosen {
31		stdout-path = "serial0:115200n8";
32	};
33};
34
35&dspi {
36	bus-num = <0>;
37	status = "okay";
38
39	flash@0 {
40		#address-cells = <1>;
41		#size-cells = <1>;
42		compatible = "n25q128a11", "jedec,spi-nor";
43		reg = <0>;
44		spi-max-frequency = <10000000>;
45	};
46
47	flash@1 {
48		#address-cells = <1>;
49		#size-cells = <1>;
50		compatible = "sst25wf040b", "jedec,spi-nor";
51		spi-cpol;
52		spi-cpha;
53		reg = <1>;
54		spi-max-frequency = <10000000>;
55	};
56
57	flash@2 {
58		#address-cells = <1>;
59		#size-cells = <1>;
60		compatible = "en25s64", "jedec,spi-nor";
61		spi-cpol;
62		spi-cpha;
63		reg = <2>;
64		spi-max-frequency = <10000000>;
65	};
66};
67
68&duart0 {
69	status = "okay";
70};
71
72&duart1 {
73	status = "okay";
74};
75
76&i2c0 {
77	status = "okay";
78
79	pca9547@77 {
80		compatible = "nxp,pca9547";
81		reg = <0x77>;
82		#address-cells = <1>;
83		#size-cells = <0>;
84
85		i2c@2 {
86			#address-cells = <1>;
87			#size-cells = <0>;
88			reg = <0x2>;
89
90			ina220@40 {
91				compatible = "ti,ina220";
92				reg = <0x40>;
93				shunt-resistor = <1000>;
94			};
95
96			ina220@41 {
97				compatible = "ti,ina220";
98				reg = <0x41>;
99				shunt-resistor = <1000>;
100			};
101		};
102
103		i2c@3 {
104			#address-cells = <1>;
105			#size-cells = <0>;
106			reg = <0x3>;
107
108			rtc@51 {
109				compatible = "nxp,pcf2129";
110				reg = <0x51>;
111				/* IRQ10_B */
112				interrupts = <0 150 0x4>;
113			};
114
115			eeprom@56 {
116				compatible = "atmel,24c512";
117				reg = <0x56>;
118			};
119
120			eeprom@57 {
121				compatible = "atmel,24c512";
122				reg = <0x57>;
123			};
124
125			temp-sensor@4c {
126				compatible = "adi,adt7461a";
127				reg = <0x4c>;
128			};
129		};
130	};
131};
132
133&ifc {
134	#address-cells = <2>;
135	#size-cells = <1>;
136	/* NOR, NAND Flashes and FPGA on board */
137	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
138		  0x1 0x0 0x0 0x7e800000 0x00010000
139		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
140	status = "okay";
141
142	nor@0,0 {
143		compatible = "cfi-flash";
144		reg = <0x0 0x0 0x8000000>;
145		big-endian;
146		bank-width = <2>;
147		device-width = <1>;
148	};
149
150	nand@1,0 {
151		compatible = "fsl,ifc-nand";
152		reg = <0x1 0x0 0x10000>;
153	};
154
155	fpga: board-control@2,0 {
156		compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
157		reg = <0x2 0x0 0x0000100>;
158	};
159};
160
161&lpuart0 {
162	status = "okay";
163};
164
165&qspi {
166	status = "okay";
167
168	qflash0: s25fl128s@0 {
169		compatible = "spansion,m25p80";
170		#address-cells = <1>;
171		#size-cells = <1>;
172		spi-max-frequency = <20000000>;
173		reg = <0>;
174	};
175};
176
177#include "fsl-ls1046-post.dtsi"
178