1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
4 *
5 * Copyright 2014-2015 Freescale Semiconductor, Inc.
6 * Copyright 2018 NXP
7 *
8 * Mingkai Hu <Mingkai.hu@freescale.com>
9 */
10
11/dts-v1/;
12#include "fsl-ls1043a.dtsi"
13
14/ {
15	model = "LS1043A RDB Board";
16	compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
17
18	aliases {
19		serial0 = &duart0;
20		serial1 = &duart1;
21		serial2 = &duart2;
22		serial3 = &duart3;
23	};
24
25	chosen {
26		stdout-path = "serial0:115200n8";
27	};
28};
29
30&i2c0 {
31	status = "okay";
32	ina220@40 {
33		compatible = "ti,ina220";
34		reg = <0x40>;
35		shunt-resistor = <1000>;
36	};
37	adt7461a@4c {
38		compatible = "adi,adt7461";
39		reg = <0x4c>;
40	};
41	eeprom@52 {
42		compatible = "atmel,24c512";
43		reg = <0x52>;
44	};
45	eeprom@53 {
46		compatible = "atmel,24c512";
47		reg = <0x53>;
48	};
49	rtc@68 {
50		compatible = "pericom,pt7c4338";
51		reg = <0x68>;
52	};
53};
54
55&ifc {
56	status = "okay";
57	#address-cells = <2>;
58	#size-cells = <1>;
59	/* NOR, NAND Flashes and FPGA on board */
60	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
61		  0x1 0x0 0x0 0x7e800000 0x00010000
62		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
63
64		nor@0,0 {
65			compatible = "cfi-flash";
66			#address-cells = <1>;
67			#size-cells = <1>;
68			reg = <0x0 0x0 0x8000000>;
69			big-endian;
70			bank-width = <2>;
71			device-width = <1>;
72		};
73
74		nand@1,0 {
75			compatible = "fsl,ifc-nand";
76			#address-cells = <1>;
77			#size-cells = <1>;
78			reg = <0x1 0x0 0x10000>;
79		};
80
81		cpld: board-control@2,0 {
82			compatible = "fsl,ls1043ardb-cpld";
83			reg = <0x2 0x0 0x0000100>;
84		};
85};
86
87&dspi0 {
88	bus-num = <0>;
89	status = "okay";
90
91	flash@0 {
92		#address-cells = <1>;
93		#size-cells = <1>;
94		compatible = "n25q128a13", "jedec,spi-nor";  /* 16MB */
95		reg = <0>;
96		spi-max-frequency = <1000000>; /* input clock */
97		fsl,spi-cs-sck-delay = <100>;
98		fsl,spi-sck-cs-delay = <100>;
99	};
100
101	slic@2 {
102		compatible = "maxim,ds26522";
103		reg = <2>;
104		spi-max-frequency = <2000000>;
105		fsl,spi-cs-sck-delay = <100>;
106		fsl,spi-sck-cs-delay = <50>;
107	};
108
109	slic@3 {
110		compatible = "maxim,ds26522";
111		reg = <3>;
112		spi-max-frequency = <2000000>;
113		fsl,spi-cs-sck-delay = <100>;
114		fsl,spi-sck-cs-delay = <50>;
115	};
116};
117
118&duart0 {
119	status = "okay";
120};
121
122&duart1 {
123	status = "okay";
124};
125
126#include "fsl-ls1043-post.dtsi"
127
128&fman0 {
129	ethernet@e0000 {
130		phy-handle = <&qsgmii_phy1>;
131		phy-connection-type = "qsgmii";
132	};
133
134	ethernet@e2000 {
135		phy-handle = <&qsgmii_phy2>;
136		phy-connection-type = "qsgmii";
137	};
138
139	ethernet@e4000 {
140		phy-handle = <&rgmii_phy1>;
141		phy-connection-type = "rgmii-id";
142	};
143
144	ethernet@e6000 {
145		phy-handle = <&rgmii_phy2>;
146		phy-connection-type = "rgmii-id";
147	};
148
149	ethernet@e8000 {
150		phy-handle = <&qsgmii_phy3>;
151		phy-connection-type = "qsgmii";
152	};
153
154	ethernet@ea000 {
155		phy-handle = <&qsgmii_phy4>;
156		phy-connection-type = "qsgmii";
157	};
158
159	ethernet@f0000 { /* 10GEC1 */
160		phy-handle = <&aqr105_phy>;
161		phy-connection-type = "xgmii";
162	};
163
164	mdio@fc000 {
165		rgmii_phy1: ethernet-phy@1 {
166			reg = <0x1>;
167		};
168
169		rgmii_phy2: ethernet-phy@2 {
170			reg = <0x2>;
171		};
172
173		qsgmii_phy1: ethernet-phy@4 {
174			reg = <0x4>;
175		};
176
177		qsgmii_phy2: ethernet-phy@5 {
178			reg = <0x5>;
179		};
180
181		qsgmii_phy3: ethernet-phy@6 {
182			reg = <0x6>;
183		};
184
185		qsgmii_phy4: ethernet-phy@7 {
186			reg = <0x7>;
187		};
188	};
189
190	mdio@fd000 {
191		aqr105_phy: ethernet-phy@1 {
192			compatible = "ethernet-phy-ieee802.3-c45";
193			interrupts = <0 132 4>;
194			reg = <0x1>;
195		};
196	};
197};
198
199&uqe {
200	ucc_hdlc: ucc@2000 {
201		compatible = "fsl,ucc-hdlc";
202		rx-clock-name = "clk8";
203		tx-clock-name = "clk9";
204		fsl,rx-sync-clock = "rsync_pin";
205		fsl,tx-sync-clock = "tsync_pin";
206		fsl,tx-timeslot-mask = <0xfffffffe>;
207		fsl,rx-timeslot-mask = <0xfffffffe>;
208		fsl,tdm-framer-type = "e1";
209		fsl,tdm-id = <0>;
210		fsl,siram-entry-id = <0>;
211		fsl,tdm-interface;
212	};
213};
214
215&usb0 {
216	status = "okay";
217};
218
219&usb1 {
220	status = "okay";
221};
222