1/*
2 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
3 *
4 * Copyright 2014-2015, Freescale Semiconductor
5 *
6 * Mingkai Hu <Mingkai.hu@freescale.com>
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPLv2 or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 *  a) This library is free software; you can redistribute it and/or
14 *     modify it under the terms of the GNU General Public License as
15 *     published by the Free Software Foundation; either version 2 of the
16 *     License, or (at your option) any later version.
17 *
18 *     This library is distributed in the hope that it will be useful,
19 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21 *     GNU General Public License for more details.
22 *
23 * Or, alternatively,
24 *
25 *  b) Permission is hereby granted, free of charge, to any person
26 *     obtaining a copy of this software and associated documentation
27 *     files (the "Software"), to deal in the Software without
28 *     restriction, including without limitation the rights to use,
29 *     copy, modify, merge, publish, distribute, sublicense, and/or
30 *     sell copies of the Software, and to permit persons to whom the
31 *     Software is furnished to do so, subject to the following
32 *     conditions:
33 *
34 *     The above copyright notice and this permission notice shall be
35 *     included in all copies or substantial portions of the Software.
36 *
37 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
38 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
42 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44 *     OTHER DEALINGS IN THE SOFTWARE.
45 */
46
47/dts-v1/;
48/include/ "fsl-ls1043a.dtsi"
49
50/ {
51	model = "LS1043A QDS Board";
52	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
53
54	aliases {
55		gpio0 = &gpio1;
56		gpio1 = &gpio2;
57		gpio2 = &gpio3;
58		gpio3 = &gpio4;
59		serial0 = &lpuart0;
60		serial1 = &lpuart1;
61		serial2 = &lpuart2;
62		serial3 = &lpuart3;
63		serial4 = &lpuart4;
64		serial5 = &lpuart5;
65	};
66};
67
68&duart0 {
69	status = "okay";
70};
71
72&duart1 {
73	status = "okay";
74};
75
76&ifc {
77	#address-cells = <2>;
78	#size-cells = <1>;
79	/* NOR, NAND Flashes and FPGA on board */
80	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
81		  0x1 0x0 0x0 0x7e800000 0x00010000
82		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
83	status = "okay";
84
85	nor@0,0 {
86		compatible = "cfi-flash";
87		reg = <0x0 0x0 0x8000000>;
88		bank-width = <2>;
89		device-width = <1>;
90	};
91
92	nand@1,0 {
93		compatible = "fsl,ifc-nand";
94		reg = <0x1 0x0 0x10000>;
95	};
96
97	fpga: board-control@2,0 {
98		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
99		reg = <0x2 0x0 0x0000100>;
100	};
101};
102
103&i2c0 {
104	status = "okay";
105
106	pca9547@77 {
107		compatible = "nxp,pca9547";
108		reg = <0x77>;
109		#address-cells = <1>;
110		#size-cells = <0>;
111
112		i2c@0 {
113			#address-cells = <1>;
114			#size-cells = <0>;
115			reg = <0x0>;
116
117			rtc@68 {
118				compatible = "dallas,ds3232";
119				reg = <0x68>;
120				/* IRQ10_B */
121				interrupts = <0 150 0x4>;
122			};
123		};
124
125		i2c@2 {
126			#address-cells = <1>;
127			#size-cells = <0>;
128			reg = <0x2>;
129
130			ina220@40 {
131				compatible = "ti,ina220";
132				reg = <0x40>;
133				shunt-resistor = <1000>;
134			};
135
136			ina220@41 {
137				compatible = "ti,ina220";
138				reg = <0x41>;
139				shunt-resistor = <1000>;
140			};
141		};
142
143		i2c@3 {
144			#address-cells = <1>;
145			#size-cells = <0>;
146			reg = <0x3>;
147
148			eeprom@56 {
149				compatible = "atmel,24c512";
150				reg = <0x56>;
151			};
152
153			eeprom@57 {
154				compatible = "atmel,24c512";
155				reg = <0x57>;
156			};
157
158			temp-sensor@4c {
159				compatible = "adi,adt7461a";
160				reg = <0x4c>;
161			};
162		};
163	};
164};
165
166&lpuart0 {
167	status = "okay";
168};
169