1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
4 *
5 * Copyright 2014-2015 Freescale Semiconductor, Inc.
6 * Copyright 2018 NXP
7 *
8 * Mingkai Hu <Mingkai.hu@freescale.com>
9 */
10
11/dts-v1/;
12#include "fsl-ls1043a.dtsi"
13
14/ {
15	model = "LS1043A QDS Board";
16	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
17
18	aliases {
19		gpio0 = &gpio1;
20		gpio1 = &gpio2;
21		gpio2 = &gpio3;
22		gpio3 = &gpio4;
23		serial0 = &duart0;
24		serial1 = &duart1;
25		serial2 = &duart2;
26		serial3 = &duart3;
27	};
28
29	chosen {
30		stdout-path = "serial0:115200n8";
31	};
32};
33
34&duart0 {
35	status = "okay";
36};
37
38&duart1 {
39	status = "okay";
40};
41
42&ifc {
43	#address-cells = <2>;
44	#size-cells = <1>;
45	/* NOR, NAND Flashes and FPGA on board */
46	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
47		  0x1 0x0 0x0 0x7e800000 0x00010000
48		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
49	status = "okay";
50
51	nor@0,0 {
52		compatible = "cfi-flash";
53		reg = <0x0 0x0 0x8000000>;
54		big-endian;
55		bank-width = <2>;
56		device-width = <1>;
57	};
58
59	nand@1,0 {
60		compatible = "fsl,ifc-nand";
61		reg = <0x1 0x0 0x10000>;
62	};
63
64	fpga: board-control@2,0 {
65		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
66		reg = <0x2 0x0 0x0000100>;
67	};
68};
69
70&i2c0 {
71	status = "okay";
72
73	pca9547@77 {
74		compatible = "nxp,pca9547";
75		reg = <0x77>;
76		#address-cells = <1>;
77		#size-cells = <0>;
78
79		i2c@0 {
80			#address-cells = <1>;
81			#size-cells = <0>;
82			reg = <0x0>;
83
84			rtc@68 {
85				compatible = "dallas,ds3232";
86				reg = <0x68>;
87				/* IRQ10_B */
88				interrupts = <0 150 0x4>;
89			};
90		};
91
92		i2c@2 {
93			#address-cells = <1>;
94			#size-cells = <0>;
95			reg = <0x2>;
96
97			ina220@40 {
98				compatible = "ti,ina220";
99				reg = <0x40>;
100				shunt-resistor = <1000>;
101			};
102
103			ina220@41 {
104				compatible = "ti,ina220";
105				reg = <0x41>;
106				shunt-resistor = <1000>;
107			};
108		};
109
110		i2c@3 {
111			#address-cells = <1>;
112			#size-cells = <0>;
113			reg = <0x3>;
114
115			eeprom@56 {
116				compatible = "atmel,24c512";
117				reg = <0x56>;
118			};
119
120			eeprom@57 {
121				compatible = "atmel,24c512";
122				reg = <0x57>;
123			};
124
125			temp-sensor@4c {
126				compatible = "adi,adt7461a";
127				reg = <0x4c>;
128			};
129		};
130	};
131};
132
133&lpuart0 {
134	status = "okay";
135};
136
137&qspi {
138	status = "okay";
139
140	qflash0: flash@0 {
141		compatible = "spansion,m25p80";
142		#address-cells = <1>;
143		#size-cells = <1>;
144		spi-max-frequency = <20000000>;
145		spi-rx-bus-width = <4>;
146		spi-tx-bus-width = <4>;
147		reg = <0>;
148	};
149};
150
151&usb0 {
152	status = "okay";
153};
154
155#include "fsl-ls1043-post.dtsi"
156