1/*
2 * Device Tree Include file for Freescale Layerscape-1043A family SoC.
3 *
4 * Copyright 2014-2015, Freescale Semiconductor
5 *
6 * Mingkai Hu <Mingkai.hu@freescale.com>
7 *
8 * This file is dual-licensed: you can use it either under the terms
9 * of the GPLv2 or the X11 license, at your option. Note that this dual
10 * licensing only applies to this file, and not this project as a
11 * whole.
12 *
13 *  a) This library is free software; you can redistribute it and/or
14 *     modify it under the terms of the GNU General Public License as
15 *     published by the Free Software Foundation; either version 2 of the
16 *     License, or (at your option) any later version.
17 *
18 *     This library is distributed in the hope that it will be useful,
19 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
20 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21 *     GNU General Public License for more details.
22 *
23 * Or, alternatively,
24 *
25 *  b) Permission is hereby granted, free of charge, to any person
26 *     obtaining a copy of this software and associated documentation
27 *     files (the "Software"), to deal in the Software without
28 *     restriction, including without limitation the rights to use,
29 *     copy, modify, merge, publish, distribute, sublicense, and/or
30 *     sell copies of the Software, and to permit persons to whom the
31 *     Software is furnished to do so, subject to the following
32 *     conditions:
33 *
34 *     The above copyright notice and this permission notice shall be
35 *     included in all copies or substantial portions of the Software.
36 *
37 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
38 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
39 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
40 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
41 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
42 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
43 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
44 *     OTHER DEALINGS IN THE SOFTWARE.
45 */
46
47/dts-v1/;
48#include "fsl-ls1043a.dtsi"
49
50/ {
51	model = "LS1043A QDS Board";
52	compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
53
54	aliases {
55		gpio0 = &gpio1;
56		gpio1 = &gpio2;
57		gpio2 = &gpio3;
58		gpio3 = &gpio4;
59		serial0 = &duart0;
60		serial1 = &duart1;
61		serial2 = &duart2;
62		serial3 = &duart3;
63	};
64
65	chosen {
66		stdout-path = "serial0:115200n8";
67	};
68};
69
70&duart0 {
71	status = "okay";
72};
73
74&duart1 {
75	status = "okay";
76};
77
78&ifc {
79	#address-cells = <2>;
80	#size-cells = <1>;
81	/* NOR, NAND Flashes and FPGA on board */
82	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
83		  0x1 0x0 0x0 0x7e800000 0x00010000
84		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
85	status = "okay";
86
87	nor@0,0 {
88		compatible = "cfi-flash";
89		reg = <0x0 0x0 0x8000000>;
90		bank-width = <2>;
91		device-width = <1>;
92	};
93
94	nand@1,0 {
95		compatible = "fsl,ifc-nand";
96		reg = <0x1 0x0 0x10000>;
97	};
98
99	fpga: board-control@2,0 {
100		compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis";
101		reg = <0x2 0x0 0x0000100>;
102	};
103};
104
105&i2c0 {
106	status = "okay";
107
108	pca9547@77 {
109		compatible = "nxp,pca9547";
110		reg = <0x77>;
111		#address-cells = <1>;
112		#size-cells = <0>;
113
114		i2c@0 {
115			#address-cells = <1>;
116			#size-cells = <0>;
117			reg = <0x0>;
118
119			rtc@68 {
120				compatible = "dallas,ds3232";
121				reg = <0x68>;
122				/* IRQ10_B */
123				interrupts = <0 150 0x4>;
124			};
125		};
126
127		i2c@2 {
128			#address-cells = <1>;
129			#size-cells = <0>;
130			reg = <0x2>;
131
132			ina220@40 {
133				compatible = "ti,ina220";
134				reg = <0x40>;
135				shunt-resistor = <1000>;
136			};
137
138			ina220@41 {
139				compatible = "ti,ina220";
140				reg = <0x41>;
141				shunt-resistor = <1000>;
142			};
143		};
144
145		i2c@3 {
146			#address-cells = <1>;
147			#size-cells = <0>;
148			reg = <0x3>;
149
150			eeprom@56 {
151				compatible = "atmel,24c512";
152				reg = <0x56>;
153			};
154
155			eeprom@57 {
156				compatible = "atmel,24c512";
157				reg = <0x57>;
158			};
159
160			temp-sensor@4c {
161				compatible = "adi,adt7461a";
162				reg = <0x4c>;
163			};
164		};
165	};
166};
167
168&lpuart0 {
169	status = "okay";
170};
171
172&qspi {
173	bus-num = <0>;
174	status = "okay";
175
176	qflash0: s25fl128s@0 {
177		compatible = "spansion,m25p80";
178		#address-cells = <1>;
179		#size-cells = <1>;
180		spi-max-frequency = <20000000>;
181		reg = <0>;
182	};
183};
184