1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Samsung Exynos5433 TM2 board device tree source 4 * 5 * Copyright (c) 2016 Samsung Electronics Co., Ltd. 6 * 7 * Common device tree source file for Samsung's TM2 and TM2E boards 8 * which are based on Samsung Exynos5433 SoC. 9 */ 10 11/dts-v1/; 12#include "exynos5433.dtsi" 13#include <dt-bindings/clock/samsung,s2mps11.h> 14#include <dt-bindings/gpio/gpio.h> 15#include <dt-bindings/input/input.h> 16#include <dt-bindings/interrupt-controller/irq.h> 17#include <dt-bindings/sound/samsung-i2s.h> 18 19/ { 20 aliases { 21 gsc0 = &gsc_0; 22 gsc1 = &gsc_1; 23 gsc2 = &gsc_2; 24 pinctrl0 = &pinctrl_alive; 25 pinctrl1 = &pinctrl_aud; 26 pinctrl2 = &pinctrl_cpif; 27 pinctrl3 = &pinctrl_ese; 28 pinctrl4 = &pinctrl_finger; 29 pinctrl5 = &pinctrl_fsys; 30 pinctrl6 = &pinctrl_imem; 31 pinctrl7 = &pinctrl_nfc; 32 pinctrl8 = &pinctrl_peric; 33 pinctrl9 = &pinctrl_touch; 34 serial0 = &serial_0; 35 serial1 = &serial_1; 36 serial2 = &serial_2; 37 serial3 = &serial_3; 38 spi0 = &spi_0; 39 spi1 = &spi_1; 40 spi2 = &spi_2; 41 spi3 = &spi_3; 42 spi4 = &spi_4; 43 mshc0 = &mshc_0; 44 mshc2 = &mshc_2; 45 }; 46 47 chosen { 48 stdout-path = &serial_1; 49 }; 50 51 memory@20000000 { 52 device_type = "memory"; 53 reg = <0x0 0x20000000 0x0 0xc0000000>; 54 }; 55 56 gpio-keys { 57 compatible = "gpio-keys"; 58 59 power-key { 60 gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; 61 linux,code = <KEY_POWER>; 62 label = "power key"; 63 debounce-interval = <10>; 64 }; 65 66 volume-up-key { 67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; 68 linux,code = <KEY_VOLUMEUP>; 69 label = "volume-up key"; 70 debounce-interval = <10>; 71 }; 72 73 volume-down-key { 74 gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; 75 linux,code = <KEY_VOLUMEDOWN>; 76 label = "volume-down key"; 77 debounce-interval = <10>; 78 }; 79 80 homepage-key { 81 gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; 82 linux,code = <KEY_MENU>; 83 label = "homepage key"; 84 debounce-interval = <10>; 85 }; 86 }; 87 88 i2c_max98504: i2c-gpio-0 { 89 compatible = "i2c-gpio"; 90 sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>; 91 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>; 92 i2c-gpio,delay-us = <2>; 93 #address-cells = <1>; 94 #size-cells = <0>; 95 96 max98504: amplifier@31 { 97 compatible = "maxim,max98504"; 98 reg = <0x31>; 99 maxim,rx-path = <1>; 100 maxim,tx-path = <1>; 101 maxim,tx-channel-mask = <3>; 102 maxim,tx-channel-source = <2>; 103 }; 104 }; 105 106 irda_regulator: irda-regulator { 107 compatible = "regulator-fixed"; 108 enable-active-high; 109 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; 110 regulator-name = "irda_regulator"; 111 }; 112 113 sound { 114 compatible = "samsung,tm2-audio"; 115 audio-codec = <&wm5110>, <&hdmi>; 116 i2s-controller = <&i2s0 0>, <&i2s1 0>; 117 audio-amplifier = <&max98504>; 118 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; 119 model = "wm5110"; 120 samsung,audio-routing = 121 /* Headphone */ 122 "HP", "HPOUT1L", 123 "HP", "HPOUT1R", 124 125 /* Speaker */ 126 "SPK", "SPKOUT", 127 "SPKOUT", "HPOUT2L", 128 "SPKOUT", "HPOUT2R", 129 130 /* Receiver */ 131 "RCV", "HPOUT3L", 132 "RCV", "HPOUT3R"; 133 status = "okay"; 134 }; 135}; 136 137&adc { 138 vdd-supply = <&ldo3_reg>; 139 status = "okay"; 140 141 thermistor-ap { 142 compatible = "murata,ncp03wf104"; 143 pullup-uv = <1800000>; 144 pullup-ohm = <100000>; 145 pulldown-ohm = <0>; 146 io-channels = <&adc 0>; 147 }; 148 149 thermistor-battery { 150 compatible = "murata,ncp03wf104"; 151 pullup-uv = <1800000>; 152 pullup-ohm = <100000>; 153 pulldown-ohm = <0>; 154 io-channels = <&adc 1>; 155 #thermal-sensor-cells = <0>; 156 }; 157 158 thermistor-charger { 159 compatible = "murata,ncp03wf104"; 160 pullup-uv = <1800000>; 161 pullup-ohm = <100000>; 162 pulldown-ohm = <0>; 163 io-channels = <&adc 2>; 164 }; 165}; 166 167&bus_g2d_400 { 168 devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; 169 vdd-supply = <&buck4_reg>; 170 exynos,saturation-ratio = <10>; 171 status = "okay"; 172}; 173 174&bus_g2d_266 { 175 devfreq = <&bus_g2d_400>; 176 status = "okay"; 177}; 178 179&bus_gscl { 180 devfreq = <&bus_g2d_400>; 181 status = "okay"; 182}; 183 184&bus_hevc { 185 devfreq = <&bus_g2d_400>; 186 status = "okay"; 187}; 188 189&bus_jpeg { 190 devfreq = <&bus_g2d_400>; 191 status = "okay"; 192}; 193 194&bus_mfc { 195 devfreq = <&bus_g2d_400>; 196 status = "okay"; 197}; 198 199&bus_mscl { 200 devfreq = <&bus_g2d_400>; 201 status = "okay"; 202}; 203 204&bus_noc0 { 205 devfreq = <&bus_g2d_400>; 206 status = "okay"; 207}; 208 209&bus_noc1 { 210 devfreq = <&bus_g2d_400>; 211 status = "okay"; 212}; 213 214&bus_noc2 { 215 devfreq = <&bus_g2d_400>; 216 status = "okay"; 217}; 218 219&cmu_aud { 220 assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 221 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, 222 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, 223 <&cmu_top CLK_MOUT_AUD_PLL>, 224 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 225 <&cmu_top CLK_MOUT_SCLK_AUDIO0>, 226 <&cmu_top CLK_MOUT_SCLK_AUDIO1>, 227 <&cmu_top CLK_MOUT_SCLK_SPDIF>, 228 229 <&cmu_aud CLK_DIV_AUD_CA5>, 230 <&cmu_aud CLK_DIV_ACLK_AUD>, 231 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, 232 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, 233 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, 234 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, 235 <&cmu_aud CLK_DIV_SCLK_AUD_UART>, 236 <&cmu_top CLK_DIV_SCLK_AUDIO0>, 237 <&cmu_top CLK_DIV_SCLK_AUDIO1>, 238 <&cmu_top CLK_DIV_SCLK_PCM1>, 239 <&cmu_top CLK_DIV_SCLK_I2S1>; 240 241 assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, 242 <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 243 <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 244 <&cmu_top CLK_FOUT_AUD_PLL>, 245 <&cmu_top CLK_MOUT_AUD_PLL>, 246 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 247 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 248 <&cmu_top CLK_SCLK_AUDIO0>; 249 250 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, 251 <196608001>, <65536001>, <32768001>, <49152001>, 252 <2048001>, <24576001>, <196608001>, 253 <24576001>, <98304001>, <2048001>, <49152001>; 254}; 255 256&cmu_fsys { 257 assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, 258 <&cmu_top CLK_MOUT_SCLK_USBHOST30>, 259 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, 260 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, 261 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, 262 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, 263 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, 264 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, 265 <&cmu_top CLK_DIV_SCLK_USBDRD30>, 266 <&cmu_top CLK_DIV_SCLK_USBHOST30>; 267 assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, 268 <&cmu_top CLK_MOUT_BUS_PLL_USER>, 269 <&cmu_top CLK_SCLK_USBDRD30_FSYS>, 270 <&cmu_top CLK_SCLK_USBHOST30_FSYS>, 271 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, 272 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, 273 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, 274 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; 275 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, 276 <66700000>, <66700000>; 277}; 278 279&cmu_gscl { 280 assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, 281 <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; 282 assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, 283 <&cmu_top CLK_ACLK_GSCL_333>; 284}; 285 286&cmu_mfc { 287 assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; 288 assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; 289}; 290 291&cmu_mif { 292 assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>; 293 assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>; 294 assigned-clock-rates = <0>, <333000000>; 295}; 296 297&cmu_mscl { 298 assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, 299 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, 300 <&cmu_mscl CLK_MOUT_SCLK_JPEG>, 301 <&cmu_top CLK_MOUT_SCLK_JPEG_A>; 302 assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, 303 <&cmu_top CLK_SCLK_JPEG_MSCL>, 304 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, 305 <&cmu_top CLK_MOUT_BUS_PLL_USER>; 306}; 307 308&cmu_top { 309 assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; 310 assigned-clock-rates = <196608001>; 311}; 312 313&cpu0 { 314 cpu-supply = <&buck3_reg>; 315}; 316 317&cpu4 { 318 cpu-supply = <&buck2_reg>; 319}; 320 321&decon { 322 status = "okay"; 323}; 324 325&decon_tv { 326 status = "okay"; 327 328 ports { 329 #address-cells = <1>; 330 #size-cells = <0>; 331 332 port@0 { 333 reg = <0>; 334 tv_to_hdmi: endpoint { 335 remote-endpoint = <&hdmi_to_tv>; 336 }; 337 }; 338 }; 339}; 340 341&dsi { 342 status = "okay"; 343 vddcore-supply = <&ldo6_reg>; 344 vddio-supply = <&ldo7_reg>; 345 samsung,burst-clock-frequency = <512000000>; 346 samsung,esc-clock-frequency = <16000000>; 347 samsung,pll-clock-frequency = <24000000>; 348 pinctrl-names = "default"; 349 pinctrl-0 = <&te_irq>; 350}; 351 352&gpu { 353 mali-supply = <&buck6_reg>; 354 status = "okay"; 355}; 356 357&hdmi { 358 hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; 359 status = "okay"; 360 vdd-supply = <&ldo6_reg>; 361 vdd_osc-supply = <&ldo7_reg>; 362 vdd_pll-supply = <&ldo6_reg>; 363 364 ports { 365 #address-cells = <1>; 366 #size-cells = <0>; 367 368 port@0 { 369 reg = <0>; 370 hdmi_to_tv: endpoint { 371 remote-endpoint = <&tv_to_hdmi>; 372 }; 373 }; 374 375 port@1 { 376 reg = <1>; 377 hdmi_to_mhl: endpoint { 378 remote-endpoint = <&mhl_to_hdmi>; 379 }; 380 }; 381 }; 382}; 383 384&hsi2c_0 { 385 status = "okay"; 386 clock-frequency = <2500000>; 387 388 pmic@66 { 389 compatible = "samsung,s2mps13-pmic"; 390 interrupt-parent = <&gpa0>; 391 interrupts = <7 IRQ_TYPE_LEVEL_LOW>; 392 reg = <0x66>; 393 samsung,s2mps11-wrstbi-ground; 394 wakeup-source; 395 396 s2mps13_osc: clocks { 397 compatible = "samsung,s2mps13-clk"; 398 #clock-cells = <1>; 399 clock-output-names = "s2mps13_ap", "s2mps13_cp", 400 "s2mps13_bt"; 401 }; 402 403 regulators { 404 ldo1_reg: LDO1 { 405 regulator-name = "VDD_ALIVE_0.9V_AP"; 406 regulator-min-microvolt = <900000>; 407 regulator-max-microvolt = <900000>; 408 regulator-always-on; 409 }; 410 411 ldo2_reg: LDO2 { 412 regulator-name = "VDDQ_MMC2_2.8V_AP"; 413 regulator-min-microvolt = <2800000>; 414 regulator-max-microvolt = <2800000>; 415 regulator-always-on; 416 regulator-state-mem { 417 regulator-off-in-suspend; 418 }; 419 }; 420 421 ldo3_reg: LDO3 { 422 regulator-name = "VDD1_E_1.8V_AP"; 423 regulator-min-microvolt = <1800000>; 424 regulator-max-microvolt = <1800000>; 425 regulator-always-on; 426 }; 427 428 ldo4_reg: LDO4 { 429 regulator-name = "VDD10_MIF_PLL_1.0V_AP"; 430 regulator-min-microvolt = <1300000>; 431 regulator-max-microvolt = <1300000>; 432 regulator-always-on; 433 regulator-state-mem { 434 regulator-off-in-suspend; 435 }; 436 }; 437 438 ldo5_reg: LDO5 { 439 regulator-name = "VDD10_DPLL_1.0V_AP"; 440 regulator-min-microvolt = <1000000>; 441 regulator-max-microvolt = <1000000>; 442 regulator-always-on; 443 regulator-state-mem { 444 regulator-off-in-suspend; 445 }; 446 }; 447 448 ldo6_reg: LDO6 { 449 regulator-name = "VDD10_MIPI2L_1.0V_AP"; 450 regulator-min-microvolt = <1000000>; 451 regulator-max-microvolt = <1000000>; 452 regulator-state-mem { 453 regulator-off-in-suspend; 454 }; 455 }; 456 457 ldo7_reg: LDO7 { 458 regulator-name = "VDD18_MIPI2L_1.8V_AP"; 459 regulator-min-microvolt = <1800000>; 460 regulator-max-microvolt = <1800000>; 461 regulator-always-on; 462 regulator-state-mem { 463 regulator-off-in-suspend; 464 }; 465 }; 466 467 ldo8_reg: LDO8 { 468 regulator-name = "VDD18_LLI_1.8V_AP"; 469 regulator-min-microvolt = <1800000>; 470 regulator-max-microvolt = <1800000>; 471 regulator-always-on; 472 regulator-state-mem { 473 regulator-off-in-suspend; 474 }; 475 }; 476 477 ldo9_reg: LDO9 { 478 regulator-name = "VDD18_ABB_ETC_1.8V_AP"; 479 regulator-min-microvolt = <1800000>; 480 regulator-max-microvolt = <1800000>; 481 regulator-always-on; 482 regulator-state-mem { 483 regulator-off-in-suspend; 484 }; 485 }; 486 487 ldo10_reg: LDO10 { 488 regulator-name = "VDD33_USB30_3.0V_AP"; 489 regulator-min-microvolt = <3000000>; 490 regulator-max-microvolt = <3000000>; 491 regulator-state-mem { 492 regulator-off-in-suspend; 493 }; 494 }; 495 496 ldo11_reg: LDO11 { 497 regulator-name = "VDD_INT_M_1.0V_AP"; 498 regulator-min-microvolt = <1000000>; 499 regulator-max-microvolt = <1000000>; 500 regulator-always-on; 501 regulator-state-mem { 502 regulator-off-in-suspend; 503 }; 504 }; 505 506 ldo12_reg: LDO12 { 507 regulator-name = "VDD_KFC_M_1.1V_AP"; 508 regulator-min-microvolt = <800000>; 509 regulator-max-microvolt = <1350000>; 510 regulator-always-on; 511 }; 512 513 ldo13_reg: LDO13 { 514 regulator-name = "VDD_G3D_M_0.95V_AP"; 515 regulator-min-microvolt = <950000>; 516 regulator-max-microvolt = <950000>; 517 regulator-always-on; 518 regulator-state-mem { 519 regulator-off-in-suspend; 520 }; 521 }; 522 523 ldo14_reg: LDO14 { 524 regulator-name = "VDDQ_M1_LDO_1.2V_AP"; 525 regulator-min-microvolt = <1200000>; 526 regulator-max-microvolt = <1200000>; 527 regulator-always-on; 528 regulator-state-mem { 529 regulator-off-in-suspend; 530 }; 531 }; 532 533 ldo15_reg: LDO15 { 534 regulator-name = "VDDQ_M2_LDO_1.2V_AP"; 535 regulator-min-microvolt = <1200000>; 536 regulator-max-microvolt = <1200000>; 537 regulator-always-on; 538 regulator-state-mem { 539 regulator-off-in-suspend; 540 }; 541 }; 542 543 ldo16_reg: LDO16 { 544 regulator-name = "VDDQ_EFUSE"; 545 regulator-min-microvolt = <1400000>; 546 regulator-max-microvolt = <3400000>; 547 regulator-always-on; 548 }; 549 550 ldo17_reg: LDO17 { 551 regulator-name = "V_TFLASH_2.8V_AP"; 552 regulator-min-microvolt = <2800000>; 553 regulator-max-microvolt = <2800000>; 554 }; 555 556 ldo18_reg: LDO18 { 557 regulator-name = "V_CODEC_1.8V_AP"; 558 regulator-min-microvolt = <1800000>; 559 regulator-max-microvolt = <1800000>; 560 }; 561 562 ldo19_reg: LDO19 { 563 regulator-name = "VDDA_1.8V_COMP"; 564 regulator-min-microvolt = <1800000>; 565 regulator-max-microvolt = <1800000>; 566 regulator-always-on; 567 }; 568 569 ldo20_reg: LDO20 { 570 regulator-name = "VCC_2.8V_AP"; 571 regulator-min-microvolt = <2800000>; 572 regulator-max-microvolt = <2800000>; 573 regulator-always-on; 574 }; 575 576 ldo21_reg: LDO21 { 577 regulator-name = "VT_CAM_1.8V"; 578 regulator-min-microvolt = <1800000>; 579 regulator-max-microvolt = <1800000>; 580 }; 581 582 ldo22_reg: LDO22 { 583 regulator-name = "CAM_IO_1.8V_AP"; 584 regulator-min-microvolt = <1800000>; 585 regulator-max-microvolt = <1800000>; 586 }; 587 588 ldo23_reg: LDO23 { 589 regulator-name = "CAM_SEN_CORE_1.05V_AP"; 590 regulator-min-microvolt = <1050000>; 591 regulator-max-microvolt = <1050000>; 592 }; 593 594 ldo24_reg: LDO24 { 595 regulator-name = "VT_CAM_1.2V"; 596 regulator-min-microvolt = <1200000>; 597 regulator-max-microvolt = <1200000>; 598 }; 599 600 ldo25_reg: LDO25 { 601 regulator-name = "UNUSED_LDO25"; 602 regulator-min-microvolt = <2800000>; 603 regulator-max-microvolt = <2800000>; 604 }; 605 606 ldo26_reg: LDO26 { 607 regulator-name = "CAM_AF_2.8V_AP"; 608 regulator-min-microvolt = <2800000>; 609 regulator-max-microvolt = <2800000>; 610 }; 611 612 ldo27_reg: LDO27 { 613 regulator-name = "VCC_3.0V_LCD_AP"; 614 regulator-min-microvolt = <3000000>; 615 regulator-max-microvolt = <3000000>; 616 }; 617 618 ldo28_reg: LDO28 { 619 regulator-name = "VCC_1.8V_LCD_AP"; 620 regulator-min-microvolt = <1800000>; 621 regulator-max-microvolt = <1800000>; 622 }; 623 624 ldo29_reg: LDO29 { 625 regulator-name = "VT_CAM_2.8V"; 626 regulator-min-microvolt = <3000000>; 627 regulator-max-microvolt = <3000000>; 628 }; 629 630 ldo30_reg: LDO30 { 631 regulator-name = "TSP_AVDD_3.3V_AP"; 632 regulator-min-microvolt = <3300000>; 633 regulator-max-microvolt = <3300000>; 634 }; 635 636 ldo31_reg: LDO31 { 637 /* 638 * LDO31 differs from target to target, 639 * its definition is in the .dts 640 */ 641 }; 642 643 ldo32_reg: LDO32 { 644 regulator-name = "VTOUCH_1.8V_AP"; 645 regulator-min-microvolt = <1800000>; 646 regulator-max-microvolt = <1800000>; 647 }; 648 649 ldo33_reg: LDO33 { 650 regulator-name = "VTOUCH_LED_3.3V"; 651 regulator-min-microvolt = <2500000>; 652 regulator-max-microvolt = <3300000>; 653 regulator-ramp-delay = <12500>; 654 }; 655 656 ldo34_reg: LDO34 { 657 regulator-name = "VCC_1.8V_MHL_AP"; 658 regulator-min-microvolt = <1000000>; 659 regulator-max-microvolt = <2100000>; 660 }; 661 662 ldo35_reg: LDO35 { 663 regulator-name = "OIS_VM_2.8V"; 664 regulator-min-microvolt = <1800000>; 665 regulator-max-microvolt = <2800000>; 666 }; 667 668 ldo36_reg: LDO36 { 669 regulator-name = "VSIL_1.0V"; 670 regulator-min-microvolt = <1000000>; 671 regulator-max-microvolt = <1000000>; 672 }; 673 674 ldo37_reg: LDO37 { 675 regulator-name = "VF_1.8V"; 676 regulator-min-microvolt = <1800000>; 677 regulator-max-microvolt = <1800000>; 678 }; 679 680 ldo38_reg: LDO38 { 681 /* 682 * LDO38 differs from target to target, 683 * its definition is in the .dts 684 */ 685 }; 686 687 ldo39_reg: LDO39 { 688 regulator-name = "V_HRM_1.8V"; 689 regulator-min-microvolt = <1800000>; 690 regulator-max-microvolt = <1800000>; 691 }; 692 693 ldo40_reg: LDO40 { 694 regulator-name = "V_HRM_3.3V"; 695 regulator-min-microvolt = <3300000>; 696 regulator-max-microvolt = <3300000>; 697 }; 698 699 buck1_reg: BUCK1 { 700 regulator-name = "VDD_MIF_0.9V_AP"; 701 regulator-min-microvolt = <600000>; 702 regulator-max-microvolt = <1500000>; 703 regulator-always-on; 704 regulator-state-mem { 705 regulator-off-in-suspend; 706 }; 707 }; 708 709 buck2_reg: BUCK2 { 710 regulator-name = "VDD_EGL_1.0V_AP"; 711 regulator-min-microvolt = <900000>; 712 regulator-max-microvolt = <1300000>; 713 regulator-always-on; 714 regulator-state-mem { 715 regulator-off-in-suspend; 716 }; 717 }; 718 719 buck3_reg: BUCK3 { 720 regulator-name = "VDD_KFC_1.0V_AP"; 721 regulator-min-microvolt = <800000>; 722 regulator-max-microvolt = <1200000>; 723 regulator-always-on; 724 regulator-state-mem { 725 regulator-off-in-suspend; 726 }; 727 }; 728 729 buck4_reg: BUCK4 { 730 regulator-name = "VDD_INT_0.95V_AP"; 731 regulator-min-microvolt = <600000>; 732 regulator-max-microvolt = <1500000>; 733 regulator-always-on; 734 regulator-state-mem { 735 regulator-off-in-suspend; 736 }; 737 }; 738 739 buck5_reg: BUCK5 { 740 regulator-name = "VDD_DISP_CAM0_0.9V_AP"; 741 regulator-min-microvolt = <600000>; 742 regulator-max-microvolt = <1500000>; 743 regulator-always-on; 744 regulator-state-mem { 745 regulator-off-in-suspend; 746 }; 747 }; 748 749 buck6_reg: BUCK6 { 750 regulator-name = "VDD_G3D_0.9V_AP"; 751 regulator-min-microvolt = <600000>; 752 regulator-max-microvolt = <1500000>; 753 regulator-always-on; 754 regulator-state-mem { 755 regulator-off-in-suspend; 756 }; 757 }; 758 759 buck7_reg: BUCK7 { 760 regulator-name = "VDD_MEM1_1.2V_AP"; 761 regulator-min-microvolt = <1200000>; 762 regulator-max-microvolt = <1200000>; 763 regulator-always-on; 764 }; 765 766 buck8_reg: BUCK8 { 767 regulator-name = "VDD_LLDO_1.35V_AP"; 768 regulator-min-microvolt = <1350000>; 769 regulator-max-microvolt = <3300000>; 770 regulator-always-on; 771 }; 772 773 buck9_reg: BUCK9 { 774 regulator-name = "VDD_MLDO_2.0V_AP"; 775 regulator-min-microvolt = <1350000>; 776 regulator-max-microvolt = <3300000>; 777 regulator-always-on; 778 }; 779 780 buck10_reg: BUCK10 { 781 regulator-name = "vdd_mem2"; 782 regulator-min-microvolt = <550000>; 783 regulator-max-microvolt = <1500000>; 784 regulator-always-on; 785 }; 786 }; 787 }; 788}; 789 790&hsi2c_4 { 791 status = "okay"; 792 793 s3fwrn5: nfc@27 { 794 compatible = "samsung,s3fwrn5-i2c"; 795 reg = <0x27>; 796 interrupt-parent = <&gpa1>; 797 interrupts = <3 IRQ_TYPE_EDGE_RISING>; 798 en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; 799 wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; 800 }; 801}; 802 803&hsi2c_5 { 804 status = "okay"; 805 806 stmfts: touchscreen@49 { 807 compatible = "st,stmfts"; 808 reg = <0x49>; 809 interrupt-parent = <&gpa1>; 810 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; 811 avdd-supply = <&ldo30_reg>; 812 vdd-supply = <&ldo31_reg>; 813 }; 814}; 815 816&hsi2c_7 { 817 status = "okay"; 818 clock-frequency = <1000000>; 819 820 bridge@39 { 821 reg = <0x39>; 822 compatible = "sil,sii8620"; 823 cvcc10-supply = <&ldo36_reg>; 824 iovcc18-supply = <&ldo34_reg>; 825 interrupt-parent = <&gpf0>; 826 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; 827 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; 828 clocks = <&pmu_system_controller 0>; 829 clock-names = "xtal"; 830 831 ports { 832 #address-cells = <1>; 833 #size-cells = <0>; 834 835 port@0 { 836 reg = <0>; 837 mhl_to_hdmi: endpoint { 838 remote-endpoint = <&hdmi_to_mhl>; 839 }; 840 }; 841 842 port@1 { 843 reg = <1>; 844 mhl_to_musb_con: endpoint { 845 remote-endpoint = <&musb_con_to_mhl>; 846 }; 847 }; 848 }; 849 }; 850}; 851 852&hsi2c_8 { 853 status = "okay"; 854 855 pmic@66 { 856 compatible = "maxim,max77843"; 857 interrupt-parent = <&gpa1>; 858 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 859 reg = <0x66>; 860 861 muic: extcon { 862 compatible = "maxim,max77843-muic"; 863 864 musb_con: connector { 865 compatible = "samsung,usb-connector-11pin", 866 "usb-b-connector"; 867 label = "micro-USB"; 868 type = "micro"; 869 870 ports { 871 #address-cells = <1>; 872 #size-cells = <0>; 873 874 port@0 { 875 /* 876 * TODO: The DTS this is based on does not have 877 * port@0 which is a required property. The ports 878 * look incomplete and need fixing. 879 * Add a disabled port just to satisfy dtschema. 880 */ 881 reg = <0>; 882 status = "disabled"; 883 }; 884 885 port@3 { 886 reg = <3>; 887 musb_con_to_mhl: endpoint { 888 remote-endpoint = <&mhl_to_musb_con>; 889 }; 890 }; 891 }; 892 }; 893 894 ports { 895 port { 896 muic_to_usb: endpoint { 897 remote-endpoint = <&usb_to_muic>; 898 }; 899 }; 900 }; 901 }; 902 903 regulators { 904 compatible = "maxim,max77843-regulator"; 905 safeout1_reg: SAFEOUT1 { 906 regulator-name = "SAFEOUT1"; 907 regulator-min-microvolt = <3300000>; 908 regulator-max-microvolt = <4950000>; 909 }; 910 911 safeout2_reg: SAFEOUT2 { 912 regulator-name = "SAFEOUT2"; 913 regulator-min-microvolt = <3300000>; 914 regulator-max-microvolt = <4950000>; 915 }; 916 917 charger_reg: CHARGER { 918 regulator-name = "CHARGER"; 919 regulator-min-microamp = <100000>; 920 regulator-max-microamp = <3150000>; 921 }; 922 }; 923 924 haptic: motor-driver { 925 compatible = "maxim,max77843-haptic"; 926 haptic-supply = <&ldo38_reg>; 927 pwms = <&pwm 0 33670 0>; 928 pwm-names = "haptic"; 929 }; 930 }; 931}; 932 933&hsi2c_11 { 934 status = "okay"; 935}; 936 937&i2s0 { 938 status = "okay"; 939}; 940 941&i2s1 { 942 assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; 943 assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; 944 status = "okay"; 945}; 946 947&mshc_0 { 948 status = "okay"; 949 mmc-hs200-1_8v; 950 mmc-hs400-1_8v; 951 cap-mmc-highspeed; 952 non-removable; 953 card-detect-delay = <200>; 954 samsung,dw-mshc-ciu-div = <3>; 955 samsung,dw-mshc-sdr-timing = <0 4>; 956 samsung,dw-mshc-ddr-timing = <0 2>; 957 samsung,dw-mshc-hs400-timing = <0 3>; 958 samsung,read-strobe-delay = <90>; 959 fifo-depth = <0x80>; 960 pinctrl-names = "default"; 961 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 962 &sd0_bus8 &sd0_rdqs>; 963 bus-width = <8>; 964 assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; 965 assigned-clock-rates = <800000000>; 966}; 967 968&mshc_2 { 969 status = "okay"; 970 cap-sd-highspeed; 971 disable-wp; 972 cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>; 973 card-detect-delay = <200>; 974 samsung,dw-mshc-ciu-div = <3>; 975 samsung,dw-mshc-sdr-timing = <0 4>; 976 samsung,dw-mshc-ddr-timing = <0 2>; 977 fifo-depth = <0x80>; 978 pinctrl-names = "default"; 979 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; 980 bus-width = <4>; 981}; 982 983&pcie { 984 status = "okay"; 985 pinctrl-names = "default"; 986 pinctrl-0 = <&pcie_bus &pcie_wlanen>; 987 vdd10-supply = <&ldo6_reg>; 988 vdd18-supply = <&ldo7_reg>; 989 assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>, 990 <&cmu_top CLK_MOUT_SCLK_PCIE_100>; 991 assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>, 992 <&cmu_top CLK_MOUT_BUS_PLL_USER>; 993 assigned-clock-rates = <0>, <100000000>; 994 interrupt-map-mask = <0 0 0 0>; 995 interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; 996}; 997 998&pcie_phy { 999 status = "okay"; 1000}; 1001 1002&ppmu_d0_general { 1003 status = "okay"; 1004 events { 1005 ppmu_event0_d0_general: ppmu-event0-d0-general { 1006 event-name = "ppmu-event0-d0-general"; 1007 }; 1008 }; 1009}; 1010 1011&ppmu_d1_general { 1012 status = "okay"; 1013 events { 1014 ppmu_event0_d1_general: ppmu-event0-d1-general { 1015 event-name = "ppmu-event0-d1-general"; 1016 }; 1017 }; 1018}; 1019 1020&pinctrl_alive { 1021 pinctrl-names = "default"; 1022 pinctrl-0 = <&initial_alive>; 1023 1024 initial_alive: initial-state { 1025 PIN_IN(gpa0-0, DOWN, FAST_SR1); 1026 PIN_IN(gpa0-1, NONE, FAST_SR1); 1027 PIN_IN(gpa0-2, DOWN, FAST_SR1); 1028 PIN_IN(gpa0-3, NONE, FAST_SR1); 1029 PIN_IN(gpa0-4, NONE, FAST_SR1); 1030 PIN_IN(gpa0-5, DOWN, FAST_SR1); 1031 PIN_IN(gpa0-6, NONE, FAST_SR1); 1032 PIN_IN(gpa0-7, NONE, FAST_SR1); 1033 1034 PIN_IN(gpa1-0, UP, FAST_SR1); 1035 PIN_IN(gpa1-1, UP, FAST_SR1); 1036 PIN_IN(gpa1-2, NONE, FAST_SR1); 1037 PIN_IN(gpa1-3, DOWN, FAST_SR1); 1038 PIN_IN(gpa1-4, DOWN, FAST_SR1); 1039 PIN_IN(gpa1-5, NONE, FAST_SR1); 1040 PIN_IN(gpa1-6, NONE, FAST_SR1); 1041 PIN_IN(gpa1-7, NONE, FAST_SR1); 1042 1043 PIN_IN(gpa2-0, NONE, FAST_SR1); 1044 PIN_IN(gpa2-1, NONE, FAST_SR1); 1045 PIN_IN(gpa2-2, NONE, FAST_SR1); 1046 PIN_IN(gpa2-3, DOWN, FAST_SR1); 1047 PIN_IN(gpa2-4, NONE, FAST_SR1); 1048 PIN_IN(gpa2-5, DOWN, FAST_SR1); 1049 PIN_IN(gpa2-6, DOWN, FAST_SR1); 1050 PIN_IN(gpa2-7, NONE, FAST_SR1); 1051 1052 PIN_IN(gpa3-0, DOWN, FAST_SR1); 1053 PIN_IN(gpa3-1, DOWN, FAST_SR1); 1054 PIN_IN(gpa3-2, NONE, FAST_SR1); 1055 PIN_IN(gpa3-3, DOWN, FAST_SR1); 1056 PIN_IN(gpa3-4, NONE, FAST_SR1); 1057 PIN_IN(gpa3-5, DOWN, FAST_SR1); 1058 PIN_IN(gpa3-6, DOWN, FAST_SR1); 1059 PIN_IN(gpa3-7, DOWN, FAST_SR1); 1060 1061 PIN_IN(gpf1-0, NONE, FAST_SR1); 1062 PIN_IN(gpf1-1, NONE, FAST_SR1); 1063 PIN_IN(gpf1-2, DOWN, FAST_SR1); 1064 PIN_IN(gpf1-4, UP, FAST_SR1); 1065 PIN_OT(gpf1-5, NONE, FAST_SR1); 1066 PIN_IN(gpf1-6, DOWN, FAST_SR1); 1067 PIN_IN(gpf1-7, DOWN, FAST_SR1); 1068 1069 PIN_IN(gpf2-0, DOWN, FAST_SR1); 1070 PIN_IN(gpf2-1, DOWN, FAST_SR1); 1071 PIN_IN(gpf2-2, DOWN, FAST_SR1); 1072 PIN_IN(gpf2-3, DOWN, FAST_SR1); 1073 1074 PIN_IN(gpf3-0, DOWN, FAST_SR1); 1075 PIN_IN(gpf3-1, DOWN, FAST_SR1); 1076 PIN_IN(gpf3-2, NONE, FAST_SR1); 1077 PIN_IN(gpf3-3, DOWN, FAST_SR1); 1078 1079 PIN_IN(gpf4-0, DOWN, FAST_SR1); 1080 PIN_IN(gpf4-1, DOWN, FAST_SR1); 1081 PIN_IN(gpf4-2, DOWN, FAST_SR1); 1082 PIN_IN(gpf4-3, DOWN, FAST_SR1); 1083 PIN_IN(gpf4-4, DOWN, FAST_SR1); 1084 PIN_IN(gpf4-5, DOWN, FAST_SR1); 1085 PIN_IN(gpf4-6, DOWN, FAST_SR1); 1086 PIN_IN(gpf4-7, DOWN, FAST_SR1); 1087 1088 PIN_IN(gpf5-0, DOWN, FAST_SR1); 1089 PIN_IN(gpf5-1, DOWN, FAST_SR1); 1090 PIN_IN(gpf5-2, DOWN, FAST_SR1); 1091 PIN_IN(gpf5-3, DOWN, FAST_SR1); 1092 PIN_OT(gpf5-4, NONE, FAST_SR1); 1093 PIN_IN(gpf5-5, DOWN, FAST_SR1); 1094 PIN_IN(gpf5-6, DOWN, FAST_SR1); 1095 PIN_IN(gpf5-7, DOWN, FAST_SR1); 1096 }; 1097 1098 te_irq: te-irq-pins { 1099 samsung,pins = "gpf1-3"; 1100 samsung,pin-function = <0xf>; 1101 }; 1102}; 1103 1104&pinctrl_cpif { 1105 pinctrl-names = "default"; 1106 pinctrl-0 = <&initial_cpif>; 1107 1108 initial_cpif: initial-state { 1109 PIN_IN(gpv6-0, DOWN, FAST_SR1); 1110 PIN_IN(gpv6-1, DOWN, FAST_SR1); 1111 }; 1112}; 1113 1114&pinctrl_ese { 1115 pinctrl-names = "default"; 1116 pinctrl-0 = <&initial_ese>; 1117 1118 pcie_wlanen: pcie-wlanen-pins { 1119 samsung,pins = "gpj2-0"; 1120 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; 1121 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; 1122 samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>; 1123 }; 1124 1125 initial_ese: initial-state { 1126 PIN_IN(gpj2-1, DOWN, FAST_SR1); 1127 PIN_IN(gpj2-2, DOWN, FAST_SR1); 1128 }; 1129}; 1130 1131&pinctrl_fsys { 1132 pinctrl-names = "default"; 1133 pinctrl-0 = <&initial_fsys>; 1134 1135 initial_fsys: initial-state { 1136 PIN_IN(gpr3-0, NONE, FAST_SR1); 1137 PIN_IN(gpr3-1, DOWN, FAST_SR1); 1138 PIN_IN(gpr3-2, DOWN, FAST_SR1); 1139 PIN_IN(gpr3-3, DOWN, FAST_SR1); 1140 PIN_IN(gpr3-7, NONE, FAST_SR1); 1141 }; 1142}; 1143 1144&pinctrl_imem { 1145 pinctrl-names = "default"; 1146 pinctrl-0 = <&initial_imem>; 1147 1148 initial_imem: initial-state { 1149 PIN_IN(gpf0-0, UP, FAST_SR1); 1150 PIN_IN(gpf0-1, UP, FAST_SR1); 1151 PIN_IN(gpf0-2, DOWN, FAST_SR1); 1152 PIN_IN(gpf0-3, UP, FAST_SR1); 1153 PIN_IN(gpf0-4, DOWN, FAST_SR1); 1154 PIN_IN(gpf0-5, NONE, FAST_SR1); 1155 PIN_IN(gpf0-6, DOWN, FAST_SR1); 1156 PIN_IN(gpf0-7, UP, FAST_SR1); 1157 }; 1158}; 1159 1160&pinctrl_nfc { 1161 pinctrl-names = "default"; 1162 pinctrl-0 = <&initial_nfc>; 1163 1164 initial_nfc: initial-state { 1165 PIN_IN(gpj0-2, DOWN, FAST_SR1); 1166 }; 1167}; 1168 1169&pinctrl_peric { 1170 pinctrl-names = "default"; 1171 pinctrl-0 = <&initial_peric>; 1172 1173 initial_peric: initial-state { 1174 PIN_IN(gpv7-0, DOWN, FAST_SR1); 1175 PIN_IN(gpv7-1, DOWN, FAST_SR1); 1176 PIN_IN(gpv7-2, NONE, FAST_SR1); 1177 PIN_IN(gpv7-3, DOWN, FAST_SR1); 1178 PIN_IN(gpv7-4, DOWN, FAST_SR1); 1179 PIN_IN(gpv7-5, DOWN, FAST_SR1); 1180 1181 PIN_IN(gpb0-4, DOWN, FAST_SR1); 1182 1183 PIN_IN(gpc0-2, DOWN, FAST_SR1); 1184 PIN_IN(gpc0-5, DOWN, FAST_SR1); 1185 PIN_IN(gpc0-7, DOWN, FAST_SR1); 1186 1187 PIN_IN(gpc1-1, DOWN, FAST_SR1); 1188 1189 PIN_IN(gpc3-4, NONE, FAST_SR1); 1190 PIN_IN(gpc3-5, NONE, FAST_SR1); 1191 PIN_IN(gpc3-6, NONE, FAST_SR1); 1192 PIN_IN(gpc3-7, NONE, FAST_SR1); 1193 1194 PIN_OT(gpg0-0, NONE, FAST_SR1); 1195 PIN_F2(gpg0-1, DOWN, FAST_SR1); 1196 1197 PIN_IN(gpd2-5, DOWN, FAST_SR1); 1198 1199 PIN_IN(gpd4-0, NONE, FAST_SR1); 1200 PIN_IN(gpd4-1, DOWN, FAST_SR1); 1201 PIN_IN(gpd4-2, DOWN, FAST_SR1); 1202 PIN_IN(gpd4-3, DOWN, FAST_SR1); 1203 PIN_IN(gpd4-4, DOWN, FAST_SR1); 1204 1205 PIN_IN(gpd6-3, DOWN, FAST_SR1); 1206 1207 PIN_IN(gpd8-1, UP, FAST_SR1); 1208 1209 PIN_IN(gpg1-0, DOWN, FAST_SR1); 1210 PIN_IN(gpg1-1, DOWN, FAST_SR1); 1211 PIN_IN(gpg1-2, DOWN, FAST_SR1); 1212 PIN_IN(gpg1-3, DOWN, FAST_SR1); 1213 PIN_IN(gpg1-4, DOWN, FAST_SR1); 1214 1215 PIN_IN(gpg2-0, DOWN, FAST_SR1); 1216 PIN_IN(gpg2-1, DOWN, FAST_SR1); 1217 1218 PIN_IN(gpg3-0, DOWN, FAST_SR1); 1219 PIN_IN(gpg3-1, DOWN, FAST_SR1); 1220 PIN_IN(gpg3-5, DOWN, FAST_SR1); 1221 }; 1222}; 1223 1224&pinctrl_touch { 1225 pinctrl-names = "default"; 1226 pinctrl-0 = <&initial_touch>; 1227 1228 initial_touch: initial-state { 1229 PIN_IN(gpj1-2, DOWN, FAST_SR1); 1230 }; 1231}; 1232 1233&pwm { 1234 pinctrl-0 = <&pwm0_out>; 1235 pinctrl-names = "default"; 1236 status = "okay"; 1237}; 1238 1239&mic { 1240 status = "okay"; 1241}; 1242 1243&pmu_system_controller { 1244 assigned-clocks = <&pmu_system_controller 0>; 1245 assigned-clock-parents = <&xxti>; 1246}; 1247 1248&serial_1 { 1249 status = "okay"; 1250}; 1251 1252&serial_3 { 1253 status = "okay"; 1254 1255 bluetooth { 1256 compatible = "brcm,bcm43438-bt"; 1257 max-speed = <3000000>; 1258 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>; 1259 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>; 1260 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>; 1261 clocks = <&s2mps13_osc S2MPS11_CLK_BT>; 1262 clock-names = "extclk"; 1263 }; 1264}; 1265 1266&spi_1 { 1267 cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; 1268 status = "okay"; 1269 1270 wm5110: audio-codec@0 { 1271 compatible = "wlf,wm5110"; 1272 reg = <0x0>; 1273 spi-max-frequency = <20000000>; 1274 interrupt-parent = <&gpa0>; 1275 interrupts = <4 IRQ_TYPE_NONE>; 1276 clocks = <&pmu_system_controller 0>, 1277 <&s2mps13_osc S2MPS11_CLK_BT>; 1278 clock-names = "mclk1", "mclk2"; 1279 1280 gpio-controller; 1281 #gpio-cells = <2>; 1282 1283 wlf,micd-detect-debounce = <300>; 1284 wlf,micd-bias-start-time = <0x1>; 1285 wlf,micd-rate = <0x7>; 1286 wlf,micd-dbtime = <0x1>; 1287 wlf,micd-force-micbias; 1288 wlf,micd-configs = <0x0 1 0>; 1289 wlf,hpdet-channel = <1>; 1290 wlf,gpsw = <0x1>; 1291 wlf,inmode = <2 0 2 0>; 1292 1293 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; 1294 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; 1295 1296 /* core supplies */ 1297 AVDD-supply = <&ldo18_reg>; 1298 DBVDD1-supply = <&ldo18_reg>; 1299 CPVDD-supply = <&ldo18_reg>; 1300 DBVDD2-supply = <&ldo18_reg>; 1301 DBVDD3-supply = <&ldo18_reg>; 1302 1303 controller-data { 1304 samsung,spi-feedback-delay = <0>; 1305 }; 1306 }; 1307}; 1308 1309&spi_3 { 1310 status = "okay"; 1311 no-cs-readback; 1312 1313 irled@0 { 1314 compatible = "ir-spi-led"; 1315 reg = <0x0>; 1316 spi-max-frequency = <5000000>; 1317 power-supply = <&irda_regulator>; 1318 duty-cycle = <60>; 1319 led-active-low; 1320 1321 controller-data { 1322 samsung,spi-feedback-delay = <0>; 1323 }; 1324 }; 1325}; 1326 1327&timer { 1328 clock-frequency = <24000000>; 1329}; 1330 1331&tmu_atlas0 { 1332 vtmu-supply = <&ldo3_reg>; 1333 status = "okay"; 1334}; 1335 1336&tmu_apollo { 1337 vtmu-supply = <&ldo3_reg>; 1338 status = "okay"; 1339}; 1340 1341&tmu_g3d { 1342 vtmu-supply = <&ldo3_reg>; 1343 status = "okay"; 1344}; 1345 1346&usbdrd30 { 1347 vdd33-supply = <&ldo10_reg>; 1348 vdd10-supply = <&ldo6_reg>; 1349 status = "okay"; 1350}; 1351 1352&usbdrd_dwc3 { 1353 dr_mode = "otg"; 1354}; 1355 1356&usbdrd30_phy { 1357 vbus-supply = <&safeout1_reg>; 1358 status = "okay"; 1359 1360 port { 1361 usb_to_muic: endpoint { 1362 remote-endpoint = <&muic_to_usb>; 1363 }; 1364 }; 1365}; 1366 1367&xxti { 1368 clock-frequency = <24000000>; 1369}; 1370