1// SPDX-License-Identifier: GPL-2.0 2/* 3 * SAMSUNG Exynos5433 TM2 board device tree source 4 * 5 * Copyright (c) 2016 Samsung Electronics Co., Ltd. 6 * 7 * Common device tree source file for Samsung's TM2 and TM2E boards 8 * which are based on Samsung Exynos5433 SoC. 9 */ 10 11/dts-v1/; 12#include "exynos5433.dtsi" 13#include <dt-bindings/clock/samsung,s2mps11.h> 14#include <dt-bindings/gpio/gpio.h> 15#include <dt-bindings/input/input.h> 16#include <dt-bindings/interrupt-controller/irq.h> 17#include <dt-bindings/sound/samsung-i2s.h> 18 19/ { 20 aliases { 21 gsc0 = &gsc_0; 22 gsc1 = &gsc_1; 23 gsc2 = &gsc_2; 24 pinctrl0 = &pinctrl_alive; 25 pinctrl1 = &pinctrl_aud; 26 pinctrl2 = &pinctrl_cpif; 27 pinctrl3 = &pinctrl_ese; 28 pinctrl4 = &pinctrl_finger; 29 pinctrl5 = &pinctrl_fsys; 30 pinctrl6 = &pinctrl_imem; 31 pinctrl7 = &pinctrl_nfc; 32 pinctrl8 = &pinctrl_peric; 33 pinctrl9 = &pinctrl_touch; 34 serial0 = &serial_0; 35 serial1 = &serial_1; 36 serial2 = &serial_2; 37 serial3 = &serial_3; 38 spi0 = &spi_0; 39 spi1 = &spi_1; 40 spi2 = &spi_2; 41 spi3 = &spi_3; 42 spi4 = &spi_4; 43 mshc0 = &mshc_0; 44 mshc2 = &mshc_2; 45 }; 46 47 chosen { 48 stdout-path = &serial_1; 49 }; 50 51 memory@20000000 { 52 device_type = "memory"; 53 reg = <0x0 0x20000000 0x0 0xc0000000>; 54 }; 55 56 gpio-keys { 57 compatible = "gpio-keys"; 58 59 power-key { 60 gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; 61 linux,code = <KEY_POWER>; 62 label = "power key"; 63 debounce-interval = <10>; 64 }; 65 66 volume-up-key { 67 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; 68 linux,code = <KEY_VOLUMEUP>; 69 label = "volume-up key"; 70 debounce-interval = <10>; 71 }; 72 73 volume-down-key { 74 gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; 75 linux,code = <KEY_VOLUMEDOWN>; 76 label = "volume-down key"; 77 debounce-interval = <10>; 78 }; 79 80 homepage-key { 81 gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; 82 linux,code = <KEY_MENU>; 83 label = "homepage key"; 84 debounce-interval = <10>; 85 }; 86 }; 87 88 i2c_max98504: i2c-gpio-0 { 89 compatible = "i2c-gpio"; 90 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ 91 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; 92 i2c-gpio,delay-us = <2>; 93 #address-cells = <1>; 94 #size-cells = <0>; 95 status = "okay"; 96 97 max98504: max98504@31 { 98 compatible = "maxim,max98504"; 99 reg = <0x31>; 100 maxim,rx-path = <1>; 101 maxim,tx-path = <1>; 102 maxim,tx-channel-mask = <3>; 103 maxim,tx-channel-source = <2>; 104 }; 105 }; 106 107 irda_regulator: irda-regulator { 108 compatible = "regulator-fixed"; 109 enable-active-high; 110 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; 111 regulator-name = "irda_regulator"; 112 }; 113 114 sound { 115 compatible = "samsung,tm2-audio"; 116 audio-codec = <&wm5110>, <&hdmi>; 117 i2s-controller = <&i2s0 0>, <&i2s1 0>; 118 audio-amplifier = <&max98504>; 119 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; 120 model = "wm5110"; 121 samsung,audio-routing = 122 /* Headphone */ 123 "HP", "HPOUT1L", 124 "HP", "HPOUT1R", 125 126 /* Speaker */ 127 "SPK", "SPKOUT", 128 "SPKOUT", "HPOUT2L", 129 "SPKOUT", "HPOUT2R", 130 131 /* Receiver */ 132 "RCV", "HPOUT3L", 133 "RCV", "HPOUT3R"; 134 status = "okay"; 135 }; 136}; 137 138&adc { 139 vdd-supply = <&ldo3_reg>; 140 status = "okay"; 141 142 thermistor-ap { 143 compatible = "murata,ncp03wf104"; 144 pullup-uv = <1800000>; 145 pullup-ohm = <100000>; 146 pulldown-ohm = <0>; 147 io-channels = <&adc 0>; 148 }; 149 150 thermistor-battery { 151 compatible = "murata,ncp03wf104"; 152 pullup-uv = <1800000>; 153 pullup-ohm = <100000>; 154 pulldown-ohm = <0>; 155 io-channels = <&adc 1>; 156 #thermal-sensor-cells = <0>; 157 }; 158 159 thermistor-charger { 160 compatible = "murata,ncp03wf104"; 161 pullup-uv = <1800000>; 162 pullup-ohm = <100000>; 163 pulldown-ohm = <0>; 164 io-channels = <&adc 2>; 165 }; 166}; 167 168&bus_g2d_400 { 169 devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; 170 vdd-supply = <&buck4_reg>; 171 exynos,saturation-ratio = <10>; 172 status = "okay"; 173}; 174 175&bus_g2d_266 { 176 devfreq = <&bus_g2d_400>; 177 status = "okay"; 178}; 179 180&bus_gscl { 181 devfreq = <&bus_g2d_400>; 182 status = "okay"; 183}; 184 185&bus_hevc { 186 devfreq = <&bus_g2d_400>; 187 status = "okay"; 188}; 189 190&bus_jpeg { 191 devfreq = <&bus_g2d_400>; 192 status = "okay"; 193}; 194 195&bus_mfc { 196 devfreq = <&bus_g2d_400>; 197 status = "okay"; 198}; 199 200&bus_mscl { 201 devfreq = <&bus_g2d_400>; 202 status = "okay"; 203}; 204 205&bus_noc0 { 206 devfreq = <&bus_g2d_400>; 207 status = "okay"; 208}; 209 210&bus_noc1 { 211 devfreq = <&bus_g2d_400>; 212 status = "okay"; 213}; 214 215&bus_noc2 { 216 devfreq = <&bus_g2d_400>; 217 status = "okay"; 218}; 219 220&cmu_aud { 221 assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 222 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, 223 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, 224 <&cmu_top CLK_MOUT_AUD_PLL>, 225 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 226 <&cmu_top CLK_MOUT_SCLK_AUDIO0>, 227 <&cmu_top CLK_MOUT_SCLK_AUDIO1>, 228 <&cmu_top CLK_MOUT_SCLK_SPDIF>, 229 230 <&cmu_aud CLK_DIV_AUD_CA5>, 231 <&cmu_aud CLK_DIV_ACLK_AUD>, 232 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, 233 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, 234 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, 235 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, 236 <&cmu_aud CLK_DIV_SCLK_AUD_UART>, 237 <&cmu_top CLK_DIV_SCLK_AUDIO0>, 238 <&cmu_top CLK_DIV_SCLK_AUDIO1>, 239 <&cmu_top CLK_DIV_SCLK_PCM1>, 240 <&cmu_top CLK_DIV_SCLK_I2S1>; 241 242 assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, 243 <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 244 <&cmu_aud CLK_MOUT_AUD_PLL_USER>, 245 <&cmu_top CLK_FOUT_AUD_PLL>, 246 <&cmu_top CLK_MOUT_AUD_PLL>, 247 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 248 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, 249 <&cmu_top CLK_SCLK_AUDIO0>; 250 251 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, 252 <196608001>, <65536001>, <32768001>, <49152001>, 253 <2048001>, <24576001>, <196608001>, 254 <24576001>, <98304001>, <2048001>, <49152001>; 255}; 256 257&cmu_fsys { 258 assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, 259 <&cmu_top CLK_MOUT_SCLK_USBHOST30>, 260 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, 261 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, 262 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, 263 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, 264 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, 265 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, 266 <&cmu_top CLK_DIV_SCLK_USBDRD30>, 267 <&cmu_top CLK_DIV_SCLK_USBHOST30>; 268 assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, 269 <&cmu_top CLK_MOUT_BUS_PLL_USER>, 270 <&cmu_top CLK_SCLK_USBDRD30_FSYS>, 271 <&cmu_top CLK_SCLK_USBHOST30_FSYS>, 272 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, 273 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, 274 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, 275 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; 276 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, 277 <66700000>, <66700000>; 278}; 279 280&cmu_gscl { 281 assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, 282 <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; 283 assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, 284 <&cmu_top CLK_ACLK_GSCL_333>; 285}; 286 287&cmu_mfc { 288 assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; 289 assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; 290}; 291 292&cmu_mif { 293 assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>; 294 assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>; 295 assigned-clock-rates = <0>, <333000000>; 296}; 297 298&cmu_mscl { 299 assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, 300 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, 301 <&cmu_mscl CLK_MOUT_SCLK_JPEG>, 302 <&cmu_top CLK_MOUT_SCLK_JPEG_A>; 303 assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, 304 <&cmu_top CLK_SCLK_JPEG_MSCL>, 305 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, 306 <&cmu_top CLK_MOUT_BUS_PLL_USER>; 307}; 308 309&cmu_top { 310 assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; 311 assigned-clock-rates = <196608001>; 312}; 313 314&cpu0 { 315 cpu-supply = <&buck3_reg>; 316}; 317 318&cpu4 { 319 cpu-supply = <&buck2_reg>; 320}; 321 322&decon { 323 status = "okay"; 324}; 325 326&decon_tv { 327 status = "okay"; 328 329 ports { 330 #address-cells = <1>; 331 #size-cells = <0>; 332 333 port@0 { 334 reg = <0>; 335 tv_to_hdmi: endpoint { 336 remote-endpoint = <&hdmi_to_tv>; 337 }; 338 }; 339 }; 340}; 341 342&dsi { 343 status = "okay"; 344 vddcore-supply = <&ldo6_reg>; 345 vddio-supply = <&ldo7_reg>; 346 samsung,burst-clock-frequency = <512000000>; 347 samsung,esc-clock-frequency = <16000000>; 348 samsung,pll-clock-frequency = <24000000>; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&te_irq>; 351}; 352 353&gpu { 354 mali-supply = <&buck6_reg>; 355 status = "okay"; 356}; 357 358&hdmi { 359 hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; 360 status = "okay"; 361 vdd-supply = <&ldo6_reg>; 362 vdd_osc-supply = <&ldo7_reg>; 363 vdd_pll-supply = <&ldo6_reg>; 364 365 ports { 366 #address-cells = <1>; 367 #size-cells = <0>; 368 369 port@0 { 370 reg = <0>; 371 hdmi_to_tv: endpoint { 372 remote-endpoint = <&tv_to_hdmi>; 373 }; 374 }; 375 376 port@1 { 377 reg = <1>; 378 hdmi_to_mhl: endpoint { 379 remote-endpoint = <&mhl_to_hdmi>; 380 }; 381 }; 382 }; 383}; 384 385&hsi2c_0 { 386 status = "okay"; 387 clock-frequency = <2500000>; 388 389 s2mps13-pmic@66 { 390 compatible = "samsung,s2mps13-pmic"; 391 interrupt-parent = <&gpa0>; 392 interrupts = <7 IRQ_TYPE_NONE>; 393 reg = <0x66>; 394 samsung,s2mps11-wrstbi-ground; 395 396 s2mps13_osc: clocks { 397 compatible = "samsung,s2mps13-clk"; 398 #clock-cells = <1>; 399 clock-output-names = "s2mps13_ap", "s2mps13_cp", 400 "s2mps13_bt"; 401 }; 402 403 regulators { 404 ldo1_reg: LDO1 { 405 regulator-name = "VDD_ALIVE_0.9V_AP"; 406 regulator-min-microvolt = <900000>; 407 regulator-max-microvolt = <900000>; 408 regulator-always-on; 409 }; 410 411 ldo2_reg: LDO2 { 412 regulator-name = "VDDQ_MMC2_2.8V_AP"; 413 regulator-min-microvolt = <2800000>; 414 regulator-max-microvolt = <2800000>; 415 regulator-always-on; 416 regulator-state-mem { 417 regulator-off-in-suspend; 418 }; 419 }; 420 421 ldo3_reg: LDO3 { 422 regulator-name = "VDD1_E_1.8V_AP"; 423 regulator-min-microvolt = <1800000>; 424 regulator-max-microvolt = <1800000>; 425 regulator-always-on; 426 }; 427 428 ldo4_reg: LDO4 { 429 regulator-name = "VDD10_MIF_PLL_1.0V_AP"; 430 regulator-min-microvolt = <1300000>; 431 regulator-max-microvolt = <1300000>; 432 regulator-always-on; 433 regulator-state-mem { 434 regulator-off-in-suspend; 435 }; 436 }; 437 438 ldo5_reg: LDO5 { 439 regulator-name = "VDD10_DPLL_1.0V_AP"; 440 regulator-min-microvolt = <1000000>; 441 regulator-max-microvolt = <1000000>; 442 regulator-always-on; 443 regulator-state-mem { 444 regulator-off-in-suspend; 445 }; 446 }; 447 448 ldo6_reg: LDO6 { 449 regulator-name = "VDD10_MIPI2L_1.0V_AP"; 450 regulator-min-microvolt = <1000000>; 451 regulator-max-microvolt = <1000000>; 452 regulator-state-mem { 453 regulator-off-in-suspend; 454 }; 455 }; 456 457 ldo7_reg: LDO7 { 458 regulator-name = "VDD18_MIPI2L_1.8V_AP"; 459 regulator-min-microvolt = <1800000>; 460 regulator-max-microvolt = <1800000>; 461 regulator-always-on; 462 regulator-state-mem { 463 regulator-off-in-suspend; 464 }; 465 }; 466 467 ldo8_reg: LDO8 { 468 regulator-name = "VDD18_LLI_1.8V_AP"; 469 regulator-min-microvolt = <1800000>; 470 regulator-max-microvolt = <1800000>; 471 regulator-always-on; 472 regulator-state-mem { 473 regulator-off-in-suspend; 474 }; 475 }; 476 477 ldo9_reg: LDO9 { 478 regulator-name = "VDD18_ABB_ETC_1.8V_AP"; 479 regulator-min-microvolt = <1800000>; 480 regulator-max-microvolt = <1800000>; 481 regulator-always-on; 482 regulator-state-mem { 483 regulator-off-in-suspend; 484 }; 485 }; 486 487 ldo10_reg: LDO10 { 488 regulator-name = "VDD33_USB30_3.0V_AP"; 489 regulator-min-microvolt = <3000000>; 490 regulator-max-microvolt = <3000000>; 491 regulator-state-mem { 492 regulator-off-in-suspend; 493 }; 494 }; 495 496 ldo11_reg: LDO11 { 497 regulator-name = "VDD_INT_M_1.0V_AP"; 498 regulator-min-microvolt = <1000000>; 499 regulator-max-microvolt = <1000000>; 500 regulator-always-on; 501 regulator-state-mem { 502 regulator-off-in-suspend; 503 }; 504 }; 505 506 ldo12_reg: LDO12 { 507 regulator-name = "VDD_KFC_M_1.1V_AP"; 508 regulator-min-microvolt = <800000>; 509 regulator-max-microvolt = <1350000>; 510 regulator-always-on; 511 }; 512 513 ldo13_reg: LDO13 { 514 regulator-name = "VDD_G3D_M_0.95V_AP"; 515 regulator-min-microvolt = <950000>; 516 regulator-max-microvolt = <950000>; 517 regulator-always-on; 518 regulator-state-mem { 519 regulator-off-in-suspend; 520 }; 521 }; 522 523 ldo14_reg: LDO14 { 524 regulator-name = "VDDQ_M1_LDO_1.2V_AP"; 525 regulator-min-microvolt = <1200000>; 526 regulator-max-microvolt = <1200000>; 527 regulator-always-on; 528 regulator-state-mem { 529 regulator-off-in-suspend; 530 }; 531 }; 532 533 ldo15_reg: LDO15 { 534 regulator-name = "VDDQ_M2_LDO_1.2V_AP"; 535 regulator-min-microvolt = <1200000>; 536 regulator-max-microvolt = <1200000>; 537 regulator-always-on; 538 regulator-state-mem { 539 regulator-off-in-suspend; 540 }; 541 }; 542 543 ldo16_reg: LDO16 { 544 regulator-name = "VDDQ_EFUSE"; 545 regulator-min-microvolt = <1400000>; 546 regulator-max-microvolt = <3400000>; 547 regulator-always-on; 548 }; 549 550 ldo17_reg: LDO17 { 551 regulator-name = "V_TFLASH_2.8V_AP"; 552 regulator-min-microvolt = <2800000>; 553 regulator-max-microvolt = <2800000>; 554 }; 555 556 ldo18_reg: LDO18 { 557 regulator-name = "V_CODEC_1.8V_AP"; 558 regulator-min-microvolt = <1800000>; 559 regulator-max-microvolt = <1800000>; 560 }; 561 562 ldo19_reg: LDO19 { 563 regulator-name = "VDDA_1.8V_COMP"; 564 regulator-min-microvolt = <1800000>; 565 regulator-max-microvolt = <1800000>; 566 regulator-always-on; 567 }; 568 569 ldo20_reg: LDO20 { 570 regulator-name = "VCC_2.8V_AP"; 571 regulator-min-microvolt = <2800000>; 572 regulator-max-microvolt = <2800000>; 573 regulator-always-on; 574 }; 575 576 ldo21_reg: LDO21 { 577 regulator-name = "VT_CAM_1.8V"; 578 regulator-min-microvolt = <1800000>; 579 regulator-max-microvolt = <1800000>; 580 }; 581 582 ldo22_reg: LDO22 { 583 regulator-name = "CAM_IO_1.8V_AP"; 584 regulator-min-microvolt = <1800000>; 585 regulator-max-microvolt = <1800000>; 586 }; 587 588 ldo23_reg: LDO23 { 589 regulator-name = "CAM_SEN_CORE_1.05V_AP"; 590 regulator-min-microvolt = <1050000>; 591 regulator-max-microvolt = <1050000>; 592 }; 593 594 ldo24_reg: LDO24 { 595 regulator-name = "VT_CAM_1.2V"; 596 regulator-min-microvolt = <1200000>; 597 regulator-max-microvolt = <1200000>; 598 }; 599 600 ldo25_reg: LDO25 { 601 regulator-name = "UNUSED_LDO25"; 602 regulator-min-microvolt = <2800000>; 603 regulator-max-microvolt = <2800000>; 604 }; 605 606 ldo26_reg: LDO26 { 607 regulator-name = "CAM_AF_2.8V_AP"; 608 regulator-min-microvolt = <2800000>; 609 regulator-max-microvolt = <2800000>; 610 }; 611 612 ldo27_reg: LDO27 { 613 regulator-name = "VCC_3.0V_LCD_AP"; 614 regulator-min-microvolt = <3000000>; 615 regulator-max-microvolt = <3000000>; 616 }; 617 618 ldo28_reg: LDO28 { 619 regulator-name = "VCC_1.8V_LCD_AP"; 620 regulator-min-microvolt = <1800000>; 621 regulator-max-microvolt = <1800000>; 622 }; 623 624 ldo29_reg: LDO29 { 625 regulator-name = "VT_CAM_2.8V"; 626 regulator-min-microvolt = <3000000>; 627 regulator-max-microvolt = <3000000>; 628 }; 629 630 ldo30_reg: LDO30 { 631 regulator-name = "TSP_AVDD_3.3V_AP"; 632 regulator-min-microvolt = <3300000>; 633 regulator-max-microvolt = <3300000>; 634 }; 635 636 ldo31_reg: LDO31 { 637 /* 638 * LDO31 differs from target to target, 639 * its definition is in the .dts 640 */ 641 }; 642 643 ldo32_reg: LDO32 { 644 regulator-name = "VTOUCH_1.8V_AP"; 645 regulator-min-microvolt = <1800000>; 646 regulator-max-microvolt = <1800000>; 647 }; 648 649 ldo33_reg: LDO33 { 650 regulator-name = "VTOUCH_LED_3.3V"; 651 regulator-min-microvolt = <2500000>; 652 regulator-max-microvolt = <3300000>; 653 regulator-ramp-delay = <12500>; 654 }; 655 656 ldo34_reg: LDO34 { 657 regulator-name = "VCC_1.8V_MHL_AP"; 658 regulator-min-microvolt = <1000000>; 659 regulator-max-microvolt = <2100000>; 660 }; 661 662 ldo35_reg: LDO35 { 663 regulator-name = "OIS_VM_2.8V"; 664 regulator-min-microvolt = <1800000>; 665 regulator-max-microvolt = <2800000>; 666 }; 667 668 ldo36_reg: LDO36 { 669 regulator-name = "VSIL_1.0V"; 670 regulator-min-microvolt = <1000000>; 671 regulator-max-microvolt = <1000000>; 672 }; 673 674 ldo37_reg: LDO37 { 675 regulator-name = "VF_1.8V"; 676 regulator-min-microvolt = <1800000>; 677 regulator-max-microvolt = <1800000>; 678 }; 679 680 ldo38_reg: LDO38 { 681 /* 682 * LDO38 differs from target to target, 683 * its definition is in the .dts 684 */ 685 }; 686 687 ldo39_reg: LDO39 { 688 regulator-name = "V_HRM_1.8V"; 689 regulator-min-microvolt = <1800000>; 690 regulator-max-microvolt = <1800000>; 691 }; 692 693 ldo40_reg: LDO40 { 694 regulator-name = "V_HRM_3.3V"; 695 regulator-min-microvolt = <3300000>; 696 regulator-max-microvolt = <3300000>; 697 }; 698 699 buck1_reg: BUCK1 { 700 regulator-name = "VDD_MIF_0.9V_AP"; 701 regulator-min-microvolt = <600000>; 702 regulator-max-microvolt = <1500000>; 703 regulator-always-on; 704 regulator-state-mem { 705 regulator-off-in-suspend; 706 }; 707 }; 708 709 buck2_reg: BUCK2 { 710 regulator-name = "VDD_EGL_1.0V_AP"; 711 regulator-min-microvolt = <900000>; 712 regulator-max-microvolt = <1300000>; 713 regulator-always-on; 714 regulator-state-mem { 715 regulator-off-in-suspend; 716 }; 717 }; 718 719 buck3_reg: BUCK3 { 720 regulator-name = "VDD_KFC_1.0V_AP"; 721 regulator-min-microvolt = <800000>; 722 regulator-max-microvolt = <1200000>; 723 regulator-always-on; 724 regulator-state-mem { 725 regulator-off-in-suspend; 726 }; 727 }; 728 729 buck4_reg: BUCK4 { 730 regulator-name = "VDD_INT_0.95V_AP"; 731 regulator-min-microvolt = <600000>; 732 regulator-max-microvolt = <1500000>; 733 regulator-always-on; 734 regulator-state-mem { 735 regulator-off-in-suspend; 736 }; 737 }; 738 739 buck5_reg: BUCK5 { 740 regulator-name = "VDD_DISP_CAM0_0.9V_AP"; 741 regulator-min-microvolt = <600000>; 742 regulator-max-microvolt = <1500000>; 743 regulator-always-on; 744 regulator-state-mem { 745 regulator-off-in-suspend; 746 }; 747 }; 748 749 buck6_reg: BUCK6 { 750 regulator-name = "VDD_G3D_0.9V_AP"; 751 regulator-min-microvolt = <600000>; 752 regulator-max-microvolt = <1500000>; 753 regulator-always-on; 754 regulator-state-mem { 755 regulator-off-in-suspend; 756 }; 757 }; 758 759 buck7_reg: BUCK7 { 760 regulator-name = "VDD_MEM1_1.2V_AP"; 761 regulator-min-microvolt = <1200000>; 762 regulator-max-microvolt = <1200000>; 763 regulator-always-on; 764 }; 765 766 buck8_reg: BUCK8 { 767 regulator-name = "VDD_LLDO_1.35V_AP"; 768 regulator-min-microvolt = <1350000>; 769 regulator-max-microvolt = <3300000>; 770 regulator-always-on; 771 }; 772 773 buck9_reg: BUCK9 { 774 regulator-name = "VDD_MLDO_2.0V_AP"; 775 regulator-min-microvolt = <1350000>; 776 regulator-max-microvolt = <3300000>; 777 regulator-always-on; 778 }; 779 780 buck10_reg: BUCK10 { 781 regulator-name = "vdd_mem2"; 782 regulator-min-microvolt = <550000>; 783 regulator-max-microvolt = <1500000>; 784 regulator-always-on; 785 }; 786 }; 787 }; 788}; 789 790&hsi2c_4 { 791 status = "okay"; 792 793 s3fwrn5: nfc@27 { 794 compatible = "samsung,s3fwrn5-i2c"; 795 reg = <0x27>; 796 interrupt-parent = <&gpa1>; 797 interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; 798 s3fwrn5,en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>; 799 s3fwrn5,fw-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>; 800 }; 801}; 802 803&hsi2c_5 { 804 status = "okay"; 805 806 stmfts: touchscreen@49 { 807 compatible = "st,stmfts"; 808 reg = <0x49>; 809 interrupt-parent = <&gpa1>; 810 interrupts = <1 IRQ_TYPE_LEVEL_LOW>; 811 avdd-supply = <&ldo30_reg>; 812 vdd-supply = <&ldo31_reg>; 813 }; 814}; 815 816&hsi2c_7 { 817 status = "okay"; 818 clock-frequency = <1000000>; 819 820 sii8620@39 { 821 reg = <0x39>; 822 compatible = "sil,sii8620"; 823 cvcc10-supply = <&ldo36_reg>; 824 iovcc18-supply = <&ldo34_reg>; 825 interrupt-parent = <&gpf0>; 826 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; 827 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>; 828 clocks = <&pmu_system_controller 0>; 829 clock-names = "xtal"; 830 831 ports { 832 #address-cells = <1>; 833 #size-cells = <0>; 834 835 port@0 { 836 reg = <0>; 837 mhl_to_hdmi: endpoint { 838 remote-endpoint = <&hdmi_to_mhl>; 839 }; 840 }; 841 842 port@1 { 843 reg = <1>; 844 mhl_to_musb_con: endpoint { 845 remote-endpoint = <&musb_con_to_mhl>; 846 }; 847 }; 848 }; 849 }; 850}; 851 852&hsi2c_8 { 853 status = "okay"; 854 855 max77843@66 { 856 compatible = "maxim,max77843"; 857 interrupt-parent = <&gpa1>; 858 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 859 reg = <0x66>; 860 861 muic: max77843-muic { 862 compatible = "maxim,max77843-muic"; 863 864 musb_con: musb_connector { 865 compatible = "samsung,usb-connector-11pin", 866 "usb-b-connector"; 867 label = "micro-USB"; 868 type = "micro"; 869 870 ports { 871 #address-cells = <1>; 872 #size-cells = <0>; 873 874 port@3 { 875 reg = <3>; 876 musb_con_to_mhl: endpoint { 877 remote-endpoint = <&mhl_to_musb_con>; 878 }; 879 }; 880 }; 881 }; 882 883 ports { 884 port { 885 muic_to_usb: endpoint { 886 remote-endpoint = <&usb_to_muic>; 887 }; 888 }; 889 }; 890 }; 891 892 regulators { 893 compatible = "maxim,max77843-regulator"; 894 safeout1_reg: SAFEOUT1 { 895 regulator-name = "SAFEOUT1"; 896 regulator-min-microvolt = <3300000>; 897 regulator-max-microvolt = <4950000>; 898 }; 899 900 safeout2_reg: SAFEOUT2 { 901 regulator-name = "SAFEOUT2"; 902 regulator-min-microvolt = <3300000>; 903 regulator-max-microvolt = <4950000>; 904 }; 905 906 charger_reg: CHARGER { 907 regulator-name = "CHARGER"; 908 regulator-min-microamp = <100000>; 909 regulator-max-microamp = <3150000>; 910 }; 911 }; 912 913 haptic: max77843-haptic { 914 compatible = "maxim,max77843-haptic"; 915 haptic-supply = <&ldo38_reg>; 916 pwms = <&pwm 0 33670 0>; 917 pwm-names = "haptic"; 918 }; 919 }; 920}; 921 922&hsi2c_11 { 923 status = "okay"; 924}; 925 926&i2s0 { 927 status = "okay"; 928}; 929 930&i2s1 { 931 assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; 932 assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; 933 status = "okay"; 934}; 935 936&mshc_0 { 937 status = "okay"; 938 mmc-hs200-1_8v; 939 mmc-hs400-1_8v; 940 cap-mmc-highspeed; 941 non-removable; 942 card-detect-delay = <200>; 943 samsung,dw-mshc-ciu-div = <3>; 944 samsung,dw-mshc-sdr-timing = <0 4>; 945 samsung,dw-mshc-ddr-timing = <0 2>; 946 samsung,dw-mshc-hs400-timing = <0 3>; 947 samsung,read-strobe-delay = <90>; 948 fifo-depth = <0x80>; 949 pinctrl-names = "default"; 950 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 951 &sd0_bus8 &sd0_rdqs>; 952 bus-width = <8>; 953 assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; 954 assigned-clock-rates = <800000000>; 955}; 956 957&mshc_2 { 958 status = "okay"; 959 cap-sd-highspeed; 960 disable-wp; 961 cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>; 962 card-detect-delay = <200>; 963 samsung,dw-mshc-ciu-div = <3>; 964 samsung,dw-mshc-sdr-timing = <0 4>; 965 samsung,dw-mshc-ddr-timing = <0 2>; 966 fifo-depth = <0x80>; 967 pinctrl-names = "default"; 968 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; 969 bus-width = <4>; 970}; 971 972&ppmu_d0_general { 973 status = "okay"; 974 events { 975 ppmu_event0_d0_general: ppmu-event0-d0-general { 976 event-name = "ppmu-event0-d0-general"; 977 }; 978 }; 979}; 980 981&ppmu_d1_general { 982 status = "okay"; 983 events { 984 ppmu_event0_d1_general: ppmu-event0-d1-general { 985 event-name = "ppmu-event0-d1-general"; 986 }; 987 }; 988}; 989 990&pinctrl_alive { 991 pinctrl-names = "default"; 992 pinctrl-0 = <&initial_alive>; 993 994 initial_alive: initial-state { 995 PIN(INPUT, gpa0-0, DOWN, FAST_SR1); 996 PIN(INPUT, gpa0-1, NONE, FAST_SR1); 997 PIN(INPUT, gpa0-2, DOWN, FAST_SR1); 998 PIN(INPUT, gpa0-3, NONE, FAST_SR1); 999 PIN(INPUT, gpa0-4, NONE, FAST_SR1); 1000 PIN(INPUT, gpa0-5, DOWN, FAST_SR1); 1001 PIN(INPUT, gpa0-6, NONE, FAST_SR1); 1002 PIN(INPUT, gpa0-7, NONE, FAST_SR1); 1003 1004 PIN(INPUT, gpa1-0, UP, FAST_SR1); 1005 PIN(INPUT, gpa1-1, UP, FAST_SR1); 1006 PIN(INPUT, gpa1-2, NONE, FAST_SR1); 1007 PIN(INPUT, gpa1-3, DOWN, FAST_SR1); 1008 PIN(INPUT, gpa1-4, DOWN, FAST_SR1); 1009 PIN(INPUT, gpa1-5, NONE, FAST_SR1); 1010 PIN(INPUT, gpa1-6, NONE, FAST_SR1); 1011 PIN(INPUT, gpa1-7, NONE, FAST_SR1); 1012 1013 PIN(INPUT, gpa2-0, NONE, FAST_SR1); 1014 PIN(INPUT, gpa2-1, NONE, FAST_SR1); 1015 PIN(INPUT, gpa2-2, NONE, FAST_SR1); 1016 PIN(INPUT, gpa2-3, DOWN, FAST_SR1); 1017 PIN(INPUT, gpa2-4, NONE, FAST_SR1); 1018 PIN(INPUT, gpa2-5, DOWN, FAST_SR1); 1019 PIN(INPUT, gpa2-6, DOWN, FAST_SR1); 1020 PIN(INPUT, gpa2-7, NONE, FAST_SR1); 1021 1022 PIN(INPUT, gpa3-0, DOWN, FAST_SR1); 1023 PIN(INPUT, gpa3-1, DOWN, FAST_SR1); 1024 PIN(INPUT, gpa3-2, NONE, FAST_SR1); 1025 PIN(INPUT, gpa3-3, DOWN, FAST_SR1); 1026 PIN(INPUT, gpa3-4, NONE, FAST_SR1); 1027 PIN(INPUT, gpa3-5, DOWN, FAST_SR1); 1028 PIN(INPUT, gpa3-6, DOWN, FAST_SR1); 1029 PIN(INPUT, gpa3-7, DOWN, FAST_SR1); 1030 1031 PIN(INPUT, gpf1-0, NONE, FAST_SR1); 1032 PIN(INPUT, gpf1-1, NONE, FAST_SR1); 1033 PIN(INPUT, gpf1-2, DOWN, FAST_SR1); 1034 PIN(INPUT, gpf1-4, UP, FAST_SR1); 1035 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); 1036 PIN(INPUT, gpf1-6, DOWN, FAST_SR1); 1037 PIN(INPUT, gpf1-7, DOWN, FAST_SR1); 1038 1039 PIN(INPUT, gpf2-0, DOWN, FAST_SR1); 1040 PIN(INPUT, gpf2-1, DOWN, FAST_SR1); 1041 PIN(INPUT, gpf2-2, DOWN, FAST_SR1); 1042 PIN(INPUT, gpf2-3, DOWN, FAST_SR1); 1043 1044 PIN(INPUT, gpf3-0, DOWN, FAST_SR1); 1045 PIN(INPUT, gpf3-1, DOWN, FAST_SR1); 1046 PIN(INPUT, gpf3-2, NONE, FAST_SR1); 1047 PIN(INPUT, gpf3-3, DOWN, FAST_SR1); 1048 1049 PIN(INPUT, gpf4-0, DOWN, FAST_SR1); 1050 PIN(INPUT, gpf4-1, DOWN, FAST_SR1); 1051 PIN(INPUT, gpf4-2, DOWN, FAST_SR1); 1052 PIN(INPUT, gpf4-3, DOWN, FAST_SR1); 1053 PIN(INPUT, gpf4-4, DOWN, FAST_SR1); 1054 PIN(INPUT, gpf4-5, DOWN, FAST_SR1); 1055 PIN(INPUT, gpf4-6, DOWN, FAST_SR1); 1056 PIN(INPUT, gpf4-7, DOWN, FAST_SR1); 1057 1058 PIN(INPUT, gpf5-0, DOWN, FAST_SR1); 1059 PIN(INPUT, gpf5-1, DOWN, FAST_SR1); 1060 PIN(INPUT, gpf5-2, DOWN, FAST_SR1); 1061 PIN(INPUT, gpf5-3, DOWN, FAST_SR1); 1062 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); 1063 PIN(INPUT, gpf5-5, DOWN, FAST_SR1); 1064 PIN(INPUT, gpf5-6, DOWN, FAST_SR1); 1065 PIN(INPUT, gpf5-7, DOWN, FAST_SR1); 1066 }; 1067 1068 te_irq: te_irq { 1069 samsung,pins = "gpf1-3"; 1070 samsung,pin-function = <0xf>; 1071 }; 1072}; 1073 1074&pinctrl_cpif { 1075 pinctrl-names = "default"; 1076 pinctrl-0 = <&initial_cpif>; 1077 1078 initial_cpif: initial-state { 1079 PIN(INPUT, gpv6-0, DOWN, FAST_SR1); 1080 PIN(INPUT, gpv6-1, DOWN, FAST_SR1); 1081 }; 1082}; 1083 1084&pinctrl_ese { 1085 pinctrl-names = "default"; 1086 pinctrl-0 = <&initial_ese>; 1087 1088 initial_ese: initial-state { 1089 PIN(INPUT, gpj2-0, DOWN, FAST_SR1); 1090 PIN(INPUT, gpj2-1, DOWN, FAST_SR1); 1091 PIN(INPUT, gpj2-2, DOWN, FAST_SR1); 1092 }; 1093}; 1094 1095&pinctrl_fsys { 1096 pinctrl-names = "default"; 1097 pinctrl-0 = <&initial_fsys>; 1098 1099 initial_fsys: initial-state { 1100 PIN(INPUT, gpr3-0, NONE, FAST_SR1); 1101 PIN(INPUT, gpr3-1, DOWN, FAST_SR1); 1102 PIN(INPUT, gpr3-2, DOWN, FAST_SR1); 1103 PIN(INPUT, gpr3-3, DOWN, FAST_SR1); 1104 PIN(INPUT, gpr3-7, NONE, FAST_SR1); 1105 }; 1106}; 1107 1108&pinctrl_imem { 1109 pinctrl-names = "default"; 1110 pinctrl-0 = <&initial_imem>; 1111 1112 initial_imem: initial-state { 1113 PIN(INPUT, gpf0-0, UP, FAST_SR1); 1114 PIN(INPUT, gpf0-1, UP, FAST_SR1); 1115 PIN(INPUT, gpf0-2, DOWN, FAST_SR1); 1116 PIN(INPUT, gpf0-3, UP, FAST_SR1); 1117 PIN(INPUT, gpf0-4, DOWN, FAST_SR1); 1118 PIN(INPUT, gpf0-5, NONE, FAST_SR1); 1119 PIN(INPUT, gpf0-6, DOWN, FAST_SR1); 1120 PIN(INPUT, gpf0-7, UP, FAST_SR1); 1121 }; 1122}; 1123 1124&pinctrl_nfc { 1125 pinctrl-names = "default"; 1126 pinctrl-0 = <&initial_nfc>; 1127 1128 initial_nfc: initial-state { 1129 PIN(INPUT, gpj0-2, DOWN, FAST_SR1); 1130 }; 1131}; 1132 1133&pinctrl_peric { 1134 pinctrl-names = "default"; 1135 pinctrl-0 = <&initial_peric>; 1136 1137 initial_peric: initial-state { 1138 PIN(INPUT, gpv7-0, DOWN, FAST_SR1); 1139 PIN(INPUT, gpv7-1, DOWN, FAST_SR1); 1140 PIN(INPUT, gpv7-2, NONE, FAST_SR1); 1141 PIN(INPUT, gpv7-3, DOWN, FAST_SR1); 1142 PIN(INPUT, gpv7-4, DOWN, FAST_SR1); 1143 PIN(INPUT, gpv7-5, DOWN, FAST_SR1); 1144 1145 PIN(INPUT, gpb0-4, DOWN, FAST_SR1); 1146 1147 PIN(INPUT, gpc0-2, DOWN, FAST_SR1); 1148 PIN(INPUT, gpc0-5, DOWN, FAST_SR1); 1149 PIN(INPUT, gpc0-7, DOWN, FAST_SR1); 1150 1151 PIN(INPUT, gpc1-1, DOWN, FAST_SR1); 1152 1153 PIN(INPUT, gpc3-4, NONE, FAST_SR1); 1154 PIN(INPUT, gpc3-5, NONE, FAST_SR1); 1155 PIN(INPUT, gpc3-6, NONE, FAST_SR1); 1156 PIN(INPUT, gpc3-7, NONE, FAST_SR1); 1157 1158 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); 1159 PIN(2, gpg0-1, DOWN, FAST_SR1); 1160 1161 PIN(INPUT, gpd2-5, DOWN, FAST_SR1); 1162 1163 PIN(INPUT, gpd4-0, NONE, FAST_SR1); 1164 PIN(INPUT, gpd4-1, DOWN, FAST_SR1); 1165 PIN(INPUT, gpd4-2, DOWN, FAST_SR1); 1166 PIN(INPUT, gpd4-3, DOWN, FAST_SR1); 1167 PIN(INPUT, gpd4-4, DOWN, FAST_SR1); 1168 1169 PIN(INPUT, gpd6-3, DOWN, FAST_SR1); 1170 1171 PIN(INPUT, gpd8-1, UP, FAST_SR1); 1172 1173 PIN(INPUT, gpg1-0, DOWN, FAST_SR1); 1174 PIN(INPUT, gpg1-1, DOWN, FAST_SR1); 1175 PIN(INPUT, gpg1-2, DOWN, FAST_SR1); 1176 PIN(INPUT, gpg1-3, DOWN, FAST_SR1); 1177 PIN(INPUT, gpg1-4, DOWN, FAST_SR1); 1178 1179 PIN(INPUT, gpg2-0, DOWN, FAST_SR1); 1180 PIN(INPUT, gpg2-1, DOWN, FAST_SR1); 1181 1182 PIN(INPUT, gpg3-0, DOWN, FAST_SR1); 1183 PIN(INPUT, gpg3-1, DOWN, FAST_SR1); 1184 PIN(INPUT, gpg3-5, DOWN, FAST_SR1); 1185 }; 1186}; 1187 1188&pinctrl_touch { 1189 pinctrl-names = "default"; 1190 pinctrl-0 = <&initial_touch>; 1191 1192 initial_touch: initial-state { 1193 PIN(INPUT, gpj1-2, DOWN, FAST_SR1); 1194 }; 1195}; 1196 1197&pwm { 1198 pinctrl-0 = <&pwm0_out>; 1199 pinctrl-names = "default"; 1200 status = "okay"; 1201}; 1202 1203&mic { 1204 status = "okay"; 1205}; 1206 1207&pmu_system_controller { 1208 assigned-clocks = <&pmu_system_controller 0>; 1209 assigned-clock-parents = <&xxti>; 1210}; 1211 1212&serial_1 { 1213 status = "okay"; 1214}; 1215 1216&serial_3 { 1217 status = "okay"; 1218 1219 bluetooth { 1220 compatible = "brcm,bcm43438-bt"; 1221 max-speed = <3000000>; 1222 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>; 1223 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>; 1224 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>; 1225 clocks = <&s2mps13_osc S2MPS11_CLK_BT>; 1226 clock-names = "extclk"; 1227 }; 1228}; 1229 1230&spi_1 { 1231 cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; 1232 status = "okay"; 1233 1234 wm5110: wm5110-codec@0 { 1235 compatible = "wlf,wm5110"; 1236 reg = <0x0>; 1237 spi-max-frequency = <20000000>; 1238 interrupt-parent = <&gpa0>; 1239 interrupts = <4 IRQ_TYPE_NONE>; 1240 clocks = <&pmu_system_controller 0>, 1241 <&s2mps13_osc S2MPS11_CLK_BT>; 1242 clock-names = "mclk1", "mclk2"; 1243 1244 gpio-controller; 1245 #gpio-cells = <2>; 1246 1247 wlf,micd-detect-debounce = <300>; 1248 wlf,micd-bias-start-time = <0x1>; 1249 wlf,micd-rate = <0x7>; 1250 wlf,micd-dbtime = <0x1>; 1251 wlf,micd-force-micbias; 1252 wlf,micd-configs = <0x0 1 0>; 1253 wlf,hpdet-channel = <1>; 1254 wlf,gpsw = <0x1>; 1255 wlf,inmode = <2 0 2 0>; 1256 1257 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; 1258 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; 1259 1260 /* core supplies */ 1261 AVDD-supply = <&ldo18_reg>; 1262 DBVDD1-supply = <&ldo18_reg>; 1263 CPVDD-supply = <&ldo18_reg>; 1264 DBVDD2-supply = <&ldo18_reg>; 1265 DBVDD3-supply = <&ldo18_reg>; 1266 1267 controller-data { 1268 samsung,spi-feedback-delay = <0>; 1269 }; 1270 }; 1271}; 1272 1273&spi_3 { 1274 status = "okay"; 1275 no-cs-readback; 1276 1277 irled@0 { 1278 compatible = "ir-spi-led"; 1279 reg = <0x0>; 1280 spi-max-frequency = <5000000>; 1281 power-supply = <&irda_regulator>; 1282 duty-cycle = <60>; 1283 led-active-low; 1284 1285 controller-data { 1286 samsung,spi-feedback-delay = <0>; 1287 }; 1288 }; 1289}; 1290 1291&timer { 1292 clock-frequency = <24000000>; 1293}; 1294 1295&tmu_atlas0 { 1296 vtmu-supply = <&ldo3_reg>; 1297 status = "okay"; 1298}; 1299 1300&tmu_apollo { 1301 vtmu-supply = <&ldo3_reg>; 1302 status = "okay"; 1303}; 1304 1305&tmu_g3d { 1306 vtmu-supply = <&ldo3_reg>; 1307 status = "okay"; 1308}; 1309 1310&usbdrd30 { 1311 vdd33-supply = <&ldo10_reg>; 1312 vdd10-supply = <&ldo6_reg>; 1313 status = "okay"; 1314}; 1315 1316&usbdrd_dwc3 { 1317 dr_mode = "otg"; 1318}; 1319 1320&usbdrd30_phy { 1321 vbus-supply = <&safeout1_reg>; 1322 status = "okay"; 1323 1324 port { 1325 usb_to_muic: endpoint { 1326 remote-endpoint = <&muic_to_usb>; 1327 }; 1328 }; 1329}; 1330 1331&xxti { 1332 clock-frequency = <24000000>; 1333}; 1334