1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2016-2017 Broadcom.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33#include "stingray-board-base.dtsi"
34
35/ {
36	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
37		compatible = "regulator-gpio";
38		regulator-name = "sdio0_vddo_ctrl_reg";
39		regulator-type = "voltage";
40		regulator-min-microvolt = <1800000>;
41		regulator-max-microvolt = <3300000>;
42		gpios = <&pca9505 18 0>;
43		states = <3300000 0x0
44			  1800000 0x1>;
45	};
46
47	sdio1_vddo_ctrl_reg: sdio1_vddo_ctrl {
48		compatible = "regulator-gpio";
49		regulator-name = "sdio1_vddo_ctrl_reg";
50		regulator-type = "voltage";
51		regulator-min-microvolt = <1800000>;
52		regulator-max-microvolt = <3300000>;
53		gpios = <&pca9505 19 0>;
54		states = <3300000 0x0
55			  1800000 0x1>;
56	};
57};
58
59&sata0 {
60	status = "okay";
61};
62
63&sata_phy0{
64	status = "okay";
65};
66
67&sata1 {
68	status = "okay";
69};
70
71&sata_phy1{
72	status = "okay";
73};
74
75&sata2 {
76	status = "okay";
77};
78
79&sata_phy2{
80	status = "okay";
81};
82
83&sata3 {
84	status = "okay";
85};
86
87&sata_phy3{
88	status = "okay";
89};
90
91&sata4 {
92	status = "okay";
93};
94
95&sata_phy4{
96	status = "okay";
97};
98
99&sata5 {
100	status = "okay";
101};
102
103&sata_phy5{
104	status = "okay";
105};
106
107&sata6 {
108	status = "okay";
109};
110
111&sata_phy6{
112	status = "okay";
113};
114
115&sata7 {
116	status = "okay";
117};
118
119&sata_phy7{
120	status = "okay";
121};
122
123&pwm {
124	status = "okay";
125};
126
127&i2c0 {
128	status = "okay";
129
130	pca9505: pca9505@20 {
131		compatible = "nxp,pca9505";
132		gpio-controller;
133		#gpio-cells = <2>;
134		reg = <0x20>;
135	};
136};
137
138&i2c1 {
139	status = "okay";
140
141	pcf8574: pcf8574@27 {
142		compatible = "nxp,pcf8574a";
143		gpio-controller;
144		#gpio-cells = <2>;
145		reg = <0x27>;
146	};
147};
148
149&enet {
150	status = "okay";
151};
152
153&nand {
154	status = "okay";
155	nandcs@0 {
156		compatible = "brcm,nandcs";
157		reg = <0>;
158		nand-ecc-mode = "hw";
159		nand-ecc-strength = <8>;
160		nand-ecc-step-size = <512>;
161		nand-bus-width = <16>;
162		brcm,nand-oob-sector-size = <16>;
163		#address-cells = <1>;
164		#size-cells = <1>;
165	};
166};
167
168&sdio0 {
169	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
170	status = "okay";
171};
172
173&sdio1 {
174	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
175	status = "okay";
176};
177