1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2022 Broadcom Ltd. 4 */ 5 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/interrupt-controller/arm-gic.h> 8 9/ { 10 compatible = "brcm,bcm6856", "brcm,bcmbca"; 11 #address-cells = <2>; 12 #size-cells = <2>; 13 14 interrupt-parent = <&gic>; 15 16 cpus { 17 #address-cells = <2>; 18 #size-cells = <0>; 19 20 B53_0: cpu@0 { 21 compatible = "brcm,brahma-b53"; 22 device_type = "cpu"; 23 reg = <0x0 0x0>; 24 next-level-cache = <&L2_0>; 25 enable-method = "psci"; 26 }; 27 28 B53_1: cpu@1 { 29 compatible = "brcm,brahma-b53"; 30 device_type = "cpu"; 31 reg = <0x0 0x1>; 32 next-level-cache = <&L2_0>; 33 enable-method = "psci"; 34 }; 35 36 L2_0: l2-cache0 { 37 compatible = "cache"; 38 cache-level = <2>; 39 }; 40 }; 41 42 timer { 43 compatible = "arm,armv8-timer"; 44 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 45 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 46 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, 47 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; 48 }; 49 50 pmu: pmu { 51 compatible = "arm,cortex-a53-pmu"; 52 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, 53 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 54 interrupt-affinity = <&B53_0>, <&B53_1>; 55 }; 56 57 clocks: clocks { 58 periph_clk:periph-clk { 59 compatible = "fixed-clock"; 60 #clock-cells = <0>; 61 clock-frequency = <200000000>; 62 }; 63 }; 64 65 psci { 66 compatible = "arm,psci-0.2"; 67 method = "smc"; 68 }; 69 70 axi@81000000 { 71 compatible = "simple-bus"; 72 #address-cells = <1>; 73 #size-cells = <1>; 74 ranges = <0x0 0x0 0x81000000 0x8000>; 75 76 gic: interrupt-controller@1000 { 77 compatible = "arm,gic-400"; 78 #interrupt-cells = <3>; 79 interrupt-controller; 80 reg = <0x1000 0x1000>, /* GICD */ 81 <0x2000 0x2000>, /* GICC */ 82 <0x4000 0x2000>, /* GICH */ 83 <0x6000 0x2000>; /* GICV */ 84 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | 85 IRQ_TYPE_LEVEL_HIGH)>; 86 }; 87 }; 88 89 bus@ff800000 { 90 compatible = "simple-bus"; 91 #address-cells = <1>; 92 #size-cells = <1>; 93 ranges = <0x0 0x0 0xff800000 0x800000>; 94 95 uart0: serial@640 { 96 compatible = "brcm,bcm6345-uart"; 97 reg = <0x640 0x18>; 98 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 99 clocks = <&periph_clk>; 100 clock-names = "refclk"; 101 status = "disabled"; 102 }; 103 }; 104}; 105