1#include "juno-clocks.dtsi" 2 3/ { 4 /* 5 * Devices shared by all Juno boards 6 */ 7 dma-ranges = <0 0 0 0 0x100 0>; 8 9 memtimer: timer@2a810000 { 10 compatible = "arm,armv7-timer-mem"; 11 reg = <0x0 0x2a810000 0x0 0x10000>; 12 clock-frequency = <50000000>; 13 #address-cells = <2>; 14 #size-cells = <2>; 15 ranges; 16 status = "disabled"; 17 frame@2a830000 { 18 frame-number = <1>; 19 interrupts = <0 60 4>; 20 reg = <0x0 0x2a830000 0x0 0x10000>; 21 }; 22 }; 23 24 mailbox: mhu@2b1f0000 { 25 compatible = "arm,mhu", "arm,primecell"; 26 reg = <0x0 0x2b1f0000 0x0 0x1000>; 27 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, 28 <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; 29 interrupt-names = "mhu_lpri_rx", 30 "mhu_hpri_rx"; 31 #mbox-cells = <1>; 32 clocks = <&soc_refclk100mhz>; 33 clock-names = "apb_pclk"; 34 }; 35 36 smmu_pcie: iommu@2b500000 { 37 compatible = "arm,mmu-401", "arm,smmu-v1"; 38 reg = <0x0 0x2b500000 0x0 0x10000>; 39 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, 40 <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; 41 #iommu-cells = <1>; 42 #global-interrupts = <1>; 43 dma-coherent; 44 status = "disabled"; 45 }; 46 47 smmu_etr: iommu@2b600000 { 48 compatible = "arm,mmu-401", "arm,smmu-v1"; 49 reg = <0x0 0x2b600000 0x0 0x10000>; 50 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, 51 <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; 52 #iommu-cells = <1>; 53 #global-interrupts = <1>; 54 dma-coherent; 55 power-domains = <&scpi_devpd 0>; 56 status = "disabled"; 57 }; 58 59 gic: interrupt-controller@2c010000 { 60 compatible = "arm,gic-400", "arm,cortex-a15-gic"; 61 reg = <0x0 0x2c010000 0 0x1000>, 62 <0x0 0x2c02f000 0 0x2000>, 63 <0x0 0x2c04f000 0 0x2000>, 64 <0x0 0x2c06f000 0 0x2000>; 65 #address-cells = <2>; 66 #interrupt-cells = <3>; 67 #size-cells = <2>; 68 interrupt-controller; 69 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; 70 ranges = <0 0 0 0x2c1c0000 0 0x40000>; 71 v2m_0: v2m@0 { 72 compatible = "arm,gic-v2m-frame"; 73 msi-controller; 74 reg = <0 0 0 0x1000>; 75 }; 76 }; 77 78 timer { 79 compatible = "arm,armv8-timer"; 80 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 81 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 82 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, 83 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; 84 }; 85 86 /* 87 * Juno TRMs specify the size for these coresight components as 64K. 88 * The actual size is just 4K though 64K is reserved. Access to the 89 * unmapped reserved region results in a DECERR response. 90 */ 91 etf@20010000 { /* etf0 */ 92 compatible = "arm,coresight-tmc", "arm,primecell"; 93 reg = <0 0x20010000 0 0x1000>; 94 95 clocks = <&soc_smc50mhz>; 96 clock-names = "apb_pclk"; 97 power-domains = <&scpi_devpd 0>; 98 ports { 99 #address-cells = <1>; 100 #size-cells = <0>; 101 102 /* input port */ 103 port@0 { 104 reg = <0>; 105 etf0_in_port: endpoint { 106 slave-mode; 107 remote-endpoint = <&main_funnel_out_port>; 108 }; 109 }; 110 111 /* output port */ 112 port@1 { 113 reg = <0>; 114 etf0_out_port: endpoint { 115 }; 116 }; 117 }; 118 }; 119 120 tpiu@20030000 { 121 compatible = "arm,coresight-tpiu", "arm,primecell"; 122 reg = <0 0x20030000 0 0x1000>; 123 124 clocks = <&soc_smc50mhz>; 125 clock-names = "apb_pclk"; 126 power-domains = <&scpi_devpd 0>; 127 port { 128 tpiu_in_port: endpoint { 129 slave-mode; 130 remote-endpoint = <&replicator_out_port0>; 131 }; 132 }; 133 }; 134 135 /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ 136 main_funnel: funnel@20040000 { 137 compatible = "arm,coresight-funnel", "arm,primecell"; 138 reg = <0 0x20040000 0 0x1000>; 139 140 clocks = <&soc_smc50mhz>; 141 clock-names = "apb_pclk"; 142 power-domains = <&scpi_devpd 0>; 143 ports { 144 #address-cells = <1>; 145 #size-cells = <0>; 146 147 /* output port */ 148 port@0 { 149 reg = <0>; 150 main_funnel_out_port: endpoint { 151 remote-endpoint = <&etf0_in_port>; 152 }; 153 }; 154 155 /* input ports */ 156 port@1 { 157 reg = <0>; 158 main_funnel_in_port0: endpoint { 159 slave-mode; 160 remote-endpoint = <&cluster0_funnel_out_port>; 161 }; 162 }; 163 164 port@2 { 165 reg = <1>; 166 main_funnel_in_port1: endpoint { 167 slave-mode; 168 remote-endpoint = <&cluster1_funnel_out_port>; 169 }; 170 }; 171 }; 172 }; 173 174 etr@20070000 { 175 compatible = "arm,coresight-tmc", "arm,primecell"; 176 reg = <0 0x20070000 0 0x1000>; 177 iommus = <&smmu_etr 0>; 178 179 clocks = <&soc_smc50mhz>; 180 clock-names = "apb_pclk"; 181 power-domains = <&scpi_devpd 0>; 182 port { 183 etr_in_port: endpoint { 184 slave-mode; 185 remote-endpoint = <&replicator_out_port1>; 186 }; 187 }; 188 }; 189 190 stm@20100000 { 191 compatible = "arm,coresight-stm", "arm,primecell"; 192 reg = <0 0x20100000 0 0x1000>, 193 <0 0x28000000 0 0x1000000>; 194 reg-names = "stm-base", "stm-stimulus-base"; 195 196 clocks = <&soc_smc50mhz>; 197 clock-names = "apb_pclk"; 198 power-domains = <&scpi_devpd 0>; 199 port { 200 stm_out_port: endpoint { 201 }; 202 }; 203 }; 204 205 etm0: etm@22040000 { 206 compatible = "arm,coresight-etm4x", "arm,primecell"; 207 reg = <0 0x22040000 0 0x1000>; 208 209 clocks = <&soc_smc50mhz>; 210 clock-names = "apb_pclk"; 211 power-domains = <&scpi_devpd 0>; 212 port { 213 cluster0_etm0_out_port: endpoint { 214 remote-endpoint = <&cluster0_funnel_in_port0>; 215 }; 216 }; 217 }; 218 219 funnel@220c0000 { /* cluster0 funnel */ 220 compatible = "arm,coresight-funnel", "arm,primecell"; 221 reg = <0 0x220c0000 0 0x1000>; 222 223 clocks = <&soc_smc50mhz>; 224 clock-names = "apb_pclk"; 225 power-domains = <&scpi_devpd 0>; 226 ports { 227 #address-cells = <1>; 228 #size-cells = <0>; 229 230 port@0 { 231 reg = <0>; 232 cluster0_funnel_out_port: endpoint { 233 remote-endpoint = <&main_funnel_in_port0>; 234 }; 235 }; 236 237 port@1 { 238 reg = <0>; 239 cluster0_funnel_in_port0: endpoint { 240 slave-mode; 241 remote-endpoint = <&cluster0_etm0_out_port>; 242 }; 243 }; 244 245 port@2 { 246 reg = <1>; 247 cluster0_funnel_in_port1: endpoint { 248 slave-mode; 249 remote-endpoint = <&cluster0_etm1_out_port>; 250 }; 251 }; 252 }; 253 }; 254 255 etm1: etm@22140000 { 256 compatible = "arm,coresight-etm4x", "arm,primecell"; 257 reg = <0 0x22140000 0 0x1000>; 258 259 clocks = <&soc_smc50mhz>; 260 clock-names = "apb_pclk"; 261 power-domains = <&scpi_devpd 0>; 262 port { 263 cluster0_etm1_out_port: endpoint { 264 remote-endpoint = <&cluster0_funnel_in_port1>; 265 }; 266 }; 267 }; 268 269 etm2: etm@23040000 { 270 compatible = "arm,coresight-etm4x", "arm,primecell"; 271 reg = <0 0x23040000 0 0x1000>; 272 273 clocks = <&soc_smc50mhz>; 274 clock-names = "apb_pclk"; 275 power-domains = <&scpi_devpd 0>; 276 port { 277 cluster1_etm0_out_port: endpoint { 278 remote-endpoint = <&cluster1_funnel_in_port0>; 279 }; 280 }; 281 }; 282 283 funnel@230c0000 { /* cluster1 funnel */ 284 compatible = "arm,coresight-funnel", "arm,primecell"; 285 reg = <0 0x230c0000 0 0x1000>; 286 287 clocks = <&soc_smc50mhz>; 288 clock-names = "apb_pclk"; 289 power-domains = <&scpi_devpd 0>; 290 ports { 291 #address-cells = <1>; 292 #size-cells = <0>; 293 294 port@0 { 295 reg = <0>; 296 cluster1_funnel_out_port: endpoint { 297 remote-endpoint = <&main_funnel_in_port1>; 298 }; 299 }; 300 301 port@1 { 302 reg = <0>; 303 cluster1_funnel_in_port0: endpoint { 304 slave-mode; 305 remote-endpoint = <&cluster1_etm0_out_port>; 306 }; 307 }; 308 309 port@2 { 310 reg = <1>; 311 cluster1_funnel_in_port1: endpoint { 312 slave-mode; 313 remote-endpoint = <&cluster1_etm1_out_port>; 314 }; 315 }; 316 port@3 { 317 reg = <2>; 318 cluster1_funnel_in_port2: endpoint { 319 slave-mode; 320 remote-endpoint = <&cluster1_etm2_out_port>; 321 }; 322 }; 323 port@4 { 324 reg = <3>; 325 cluster1_funnel_in_port3: endpoint { 326 slave-mode; 327 remote-endpoint = <&cluster1_etm3_out_port>; 328 }; 329 }; 330 }; 331 }; 332 333 etm3: etm@23140000 { 334 compatible = "arm,coresight-etm4x", "arm,primecell"; 335 reg = <0 0x23140000 0 0x1000>; 336 337 clocks = <&soc_smc50mhz>; 338 clock-names = "apb_pclk"; 339 power-domains = <&scpi_devpd 0>; 340 port { 341 cluster1_etm1_out_port: endpoint { 342 remote-endpoint = <&cluster1_funnel_in_port1>; 343 }; 344 }; 345 }; 346 347 etm4: etm@23240000 { 348 compatible = "arm,coresight-etm4x", "arm,primecell"; 349 reg = <0 0x23240000 0 0x1000>; 350 351 clocks = <&soc_smc50mhz>; 352 clock-names = "apb_pclk"; 353 power-domains = <&scpi_devpd 0>; 354 port { 355 cluster1_etm2_out_port: endpoint { 356 remote-endpoint = <&cluster1_funnel_in_port2>; 357 }; 358 }; 359 }; 360 361 etm5: etm@23340000 { 362 compatible = "arm,coresight-etm4x", "arm,primecell"; 363 reg = <0 0x23340000 0 0x1000>; 364 365 clocks = <&soc_smc50mhz>; 366 clock-names = "apb_pclk"; 367 power-domains = <&scpi_devpd 0>; 368 port { 369 cluster1_etm3_out_port: endpoint { 370 remote-endpoint = <&cluster1_funnel_in_port3>; 371 }; 372 }; 373 }; 374 375 replicator@20120000 { 376 compatible = "qcom,coresight-replicator1x", "arm,primecell"; 377 reg = <0 0x20120000 0 0x1000>; 378 379 clocks = <&soc_smc50mhz>; 380 clock-names = "apb_pclk"; 381 power-domains = <&scpi_devpd 0>; 382 383 ports { 384 #address-cells = <1>; 385 #size-cells = <0>; 386 387 /* replicator output ports */ 388 port@0 { 389 reg = <0>; 390 replicator_out_port0: endpoint { 391 remote-endpoint = <&tpiu_in_port>; 392 }; 393 }; 394 395 port@1 { 396 reg = <1>; 397 replicator_out_port1: endpoint { 398 remote-endpoint = <&etr_in_port>; 399 }; 400 }; 401 402 /* replicator input port */ 403 port@2 { 404 reg = <0>; 405 replicator_in_port0: endpoint { 406 slave-mode; 407 }; 408 }; 409 }; 410 }; 411 412 sram: sram@2e000000 { 413 compatible = "arm,juno-sram-ns", "mmio-sram"; 414 reg = <0x0 0x2e000000 0x0 0x8000>; 415 416 #address-cells = <1>; 417 #size-cells = <1>; 418 ranges = <0 0x0 0x2e000000 0x8000>; 419 420 cpu_scp_lpri: scp-shmem@0 { 421 compatible = "arm,juno-scp-shmem"; 422 reg = <0x0 0x200>; 423 }; 424 425 cpu_scp_hpri: scp-shmem@200 { 426 compatible = "arm,juno-scp-shmem"; 427 reg = <0x200 0x200>; 428 }; 429 }; 430 431 pcie_ctlr: pcie-controller@40000000 { 432 compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; 433 device_type = "pci"; 434 reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ 435 bus-range = <0 255>; 436 linux,pci-domain = <0>; 437 #address-cells = <3>; 438 #size-cells = <2>; 439 dma-coherent; 440 ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, 441 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, 442 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; 443 #interrupt-cells = <1>; 444 interrupt-map-mask = <0 0 0 7>; 445 interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, 446 <0 0 0 2 &gic 0 0 0 137 4>, 447 <0 0 0 3 &gic 0 0 0 138 4>, 448 <0 0 0 4 &gic 0 0 0 139 4>; 449 msi-parent = <&v2m_0>; 450 status = "disabled"; 451 iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ 452 iommu-map = <0x0 &smmu_pcie 0x0 0x1>; 453 }; 454 455 scpi { 456 compatible = "arm,scpi"; 457 mboxes = <&mailbox 1>; 458 shmem = <&cpu_scp_hpri>; 459 460 clocks { 461 compatible = "arm,scpi-clocks"; 462 463 scpi_dvfs: scpi-dvfs { 464 compatible = "arm,scpi-dvfs-clocks"; 465 #clock-cells = <1>; 466 clock-indices = <0>, <1>, <2>; 467 clock-output-names = "atlclk", "aplclk","gpuclk"; 468 }; 469 scpi_clk: scpi-clk { 470 compatible = "arm,scpi-variable-clocks"; 471 #clock-cells = <1>; 472 clock-indices = <3>; 473 clock-output-names = "pxlclk"; 474 }; 475 }; 476 477 scpi_devpd: scpi-power-domains { 478 compatible = "arm,scpi-power-domains"; 479 num-domains = <2>; 480 #power-domain-cells = <1>; 481 }; 482 483 scpi_sensors0: sensors { 484 compatible = "arm,scpi-sensors"; 485 #thermal-sensor-cells = <1>; 486 }; 487 }; 488 489 thermal-zones { 490 pmic { 491 polling-delay = <1000>; 492 polling-delay-passive = <100>; 493 thermal-sensors = <&scpi_sensors0 0>; 494 }; 495 496 soc { 497 polling-delay = <1000>; 498 polling-delay-passive = <100>; 499 thermal-sensors = <&scpi_sensors0 3>; 500 }; 501 502 big_cluster_thermal_zone: big_cluster { 503 polling-delay = <1000>; 504 polling-delay-passive = <100>; 505 thermal-sensors = <&scpi_sensors0 21>; 506 status = "disabled"; 507 }; 508 509 little_cluster_thermal_zone: little_cluster { 510 polling-delay = <1000>; 511 polling-delay-passive = <100>; 512 thermal-sensors = <&scpi_sensors0 22>; 513 status = "disabled"; 514 }; 515 516 gpu0_thermal_zone: gpu0 { 517 polling-delay = <1000>; 518 polling-delay-passive = <100>; 519 thermal-sensors = <&scpi_sensors0 23>; 520 status = "disabled"; 521 }; 522 523 gpu1_thermal_zone: gpu1 { 524 polling-delay = <1000>; 525 polling-delay-passive = <100>; 526 thermal-sensors = <&scpi_sensors0 24>; 527 status = "disabled"; 528 }; 529 }; 530 531 smmu_dma: iommu@7fb00000 { 532 compatible = "arm,mmu-401", "arm,smmu-v1"; 533 reg = <0x0 0x7fb00000 0x0 0x10000>; 534 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, 535 <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 536 #iommu-cells = <1>; 537 #global-interrupts = <1>; 538 dma-coherent; 539 status = "disabled"; 540 }; 541 542 smmu_hdlcd1: iommu@7fb10000 { 543 compatible = "arm,mmu-401", "arm,smmu-v1"; 544 reg = <0x0 0x7fb10000 0x0 0x10000>; 545 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 546 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 547 #iommu-cells = <1>; 548 #global-interrupts = <1>; 549 status = "disabled"; 550 }; 551 552 smmu_hdlcd0: iommu@7fb20000 { 553 compatible = "arm,mmu-401", "arm,smmu-v1"; 554 reg = <0x0 0x7fb20000 0x0 0x10000>; 555 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 556 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 557 #iommu-cells = <1>; 558 #global-interrupts = <1>; 559 status = "disabled"; 560 }; 561 562 smmu_usb: iommu@7fb30000 { 563 compatible = "arm,mmu-401", "arm,smmu-v1"; 564 reg = <0x0 0x7fb30000 0x0 0x10000>; 565 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, 566 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; 567 #iommu-cells = <1>; 568 #global-interrupts = <1>; 569 dma-coherent; 570 status = "disabled"; 571 }; 572 573 dma@7ff00000 { 574 compatible = "arm,pl330", "arm,primecell"; 575 reg = <0x0 0x7ff00000 0 0x1000>; 576 #dma-cells = <1>; 577 #dma-channels = <8>; 578 #dma-requests = <32>; 579 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, 580 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, 581 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, 582 <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, 583 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, 584 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, 585 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 586 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 587 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; 588 iommus = <&smmu_dma 0>, 589 <&smmu_dma 1>, 590 <&smmu_dma 2>, 591 <&smmu_dma 3>, 592 <&smmu_dma 4>, 593 <&smmu_dma 5>, 594 <&smmu_dma 6>, 595 <&smmu_dma 7>, 596 <&smmu_dma 8>; 597 clocks = <&soc_faxiclk>; 598 clock-names = "apb_pclk"; 599 }; 600 601 hdlcd@7ff50000 { 602 compatible = "arm,hdlcd"; 603 reg = <0 0x7ff50000 0 0x1000>; 604 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; 605 iommus = <&smmu_hdlcd1 0>; 606 clocks = <&scpi_clk 3>; 607 clock-names = "pxlclk"; 608 609 port { 610 hdlcd1_output: hdlcd1-endpoint { 611 remote-endpoint = <&tda998x_1_input>; 612 }; 613 }; 614 }; 615 616 hdlcd@7ff60000 { 617 compatible = "arm,hdlcd"; 618 reg = <0 0x7ff60000 0 0x1000>; 619 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 620 iommus = <&smmu_hdlcd0 0>; 621 clocks = <&scpi_clk 3>; 622 clock-names = "pxlclk"; 623 624 port { 625 hdlcd0_output: hdlcd0-endpoint { 626 remote-endpoint = <&tda998x_0_input>; 627 }; 628 }; 629 }; 630 631 soc_uart0: uart@7ff80000 { 632 compatible = "arm,pl011", "arm,primecell"; 633 reg = <0x0 0x7ff80000 0x0 0x1000>; 634 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; 635 clocks = <&soc_uartclk>, <&soc_refclk100mhz>; 636 clock-names = "uartclk", "apb_pclk"; 637 }; 638 639 i2c@7ffa0000 { 640 compatible = "snps,designware-i2c"; 641 reg = <0x0 0x7ffa0000 0x0 0x1000>; 642 #address-cells = <1>; 643 #size-cells = <0>; 644 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; 645 clock-frequency = <400000>; 646 i2c-sda-hold-time-ns = <500>; 647 clocks = <&soc_smc50mhz>; 648 649 hdmi-transmitter@70 { 650 compatible = "nxp,tda998x"; 651 reg = <0x70>; 652 port { 653 tda998x_0_input: tda998x-0-endpoint { 654 remote-endpoint = <&hdlcd0_output>; 655 }; 656 }; 657 }; 658 659 hdmi-transmitter@71 { 660 compatible = "nxp,tda998x"; 661 reg = <0x71>; 662 port { 663 tda998x_1_input: tda998x-1-endpoint { 664 remote-endpoint = <&hdlcd1_output>; 665 }; 666 }; 667 }; 668 }; 669 670 ohci@7ffb0000 { 671 compatible = "generic-ohci"; 672 reg = <0x0 0x7ffb0000 0x0 0x10000>; 673 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; 674 iommus = <&smmu_usb 0>; 675 clocks = <&soc_usb48mhz>; 676 }; 677 678 ehci@7ffc0000 { 679 compatible = "generic-ehci"; 680 reg = <0x0 0x7ffc0000 0x0 0x10000>; 681 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; 682 iommus = <&smmu_usb 0>; 683 clocks = <&soc_usb48mhz>; 684 }; 685 686 memory-controller@7ffd0000 { 687 compatible = "arm,pl354", "arm,primecell"; 688 reg = <0 0x7ffd0000 0 0x1000>; 689 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, 690 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; 691 clocks = <&soc_smc50mhz>; 692 clock-names = "apb_pclk"; 693 }; 694 695 memory@80000000 { 696 device_type = "memory"; 697 /* last 16MB of the first memory area is reserved for secure world use by firmware */ 698 reg = <0x00000000 0x80000000 0x0 0x7f000000>, 699 <0x00000008 0x80000000 0x1 0x80000000>; 700 }; 701 702 smb@08000000 { 703 compatible = "simple-bus"; 704 #address-cells = <2>; 705 #size-cells = <1>; 706 ranges = <0 0 0 0x08000000 0x04000000>, 707 <1 0 0 0x14000000 0x04000000>, 708 <2 0 0 0x18000000 0x04000000>, 709 <3 0 0 0x1c000000 0x04000000>, 710 <4 0 0 0x0c000000 0x04000000>, 711 <5 0 0 0x10000000 0x04000000>; 712 713 #interrupt-cells = <1>; 714 interrupt-map-mask = <0 0 15>; 715 interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, 716 <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, 717 <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, 718 <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, 719 <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, 720 <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, 721 <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, 722 <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, 723 <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, 724 <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, 725 <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, 726 <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, 727 <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; 728 729 /include/ "juno-motherboard.dtsi" 730 }; 731 732 site2: tlx@60000000 { 733 compatible = "simple-bus"; 734 #address-cells = <1>; 735 #size-cells = <1>; 736 ranges = <0 0 0x60000000 0x10000000>; 737 #interrupt-cells = <1>; 738 interrupt-map-mask = <0 0>; 739 interrupt-map = <0 0 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>; 740 }; 741}; 742