1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
4 * Copyright (c) 2017 BayLibre, SAS
5 * Author: Neil Armstrong <narmstrong@baylibre.com>
6 */
7
8/dts-v1/;
9
10#include "meson-gxm.dtsi"
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/sound/meson-aiu.h>
13
14/ {
15	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
16	model = "Khadas VIM2";
17
18	aliases {
19		serial0 = &uart_AO;
20		serial2 = &uart_AO_B;
21	};
22
23	chosen {
24		stdout-path = "serial0:115200n8";
25	};
26
27	memory@0 {
28		device_type = "memory";
29		reg = <0x0 0x0 0x0 0x80000000>;
30	};
31
32	adc-keys {
33		compatible = "adc-keys";
34		io-channels = <&saradc 0>;
35		io-channel-names = "buttons";
36		keyup-threshold-microvolt = <1710000>;
37
38		button-function {
39			label = "Function";
40			linux,code = <KEY_FN>;
41			press-threshold-microvolt = <10000>;
42		};
43	};
44
45	emmc_pwrseq: emmc-pwrseq {
46		compatible = "mmc-pwrseq-emmc";
47		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
48	};
49
50	gpio_fan: gpio-fan {
51		compatible = "gpio-fan";
52		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
53			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
54		/* Dummy RPM values since fan is optional */
55		gpio-fan,speed-map =
56				<0 0>,
57				<1 1>,
58				<2 2>,
59				<3 3>;
60		#cooling-cells = <2>;
61	};
62
63	gpio-keys-polled {
64		compatible = "gpio-keys-polled";
65		poll-interval = <100>;
66
67		power-button {
68			label = "power";
69			linux,code = <KEY_POWER>;
70			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
71		};
72	};
73
74	hdmi-connector {
75		compatible = "hdmi-connector";
76		type = "a";
77
78		port {
79			hdmi_connector_in: endpoint {
80				remote-endpoint = <&hdmi_tx_tmds_out>;
81			};
82		};
83	};
84
85	led-controller {
86		compatible = "pwm-leds";
87
88		led-1 {
89			label = "vim:red:power";
90			pwms = <&pwm_AO_ab 1 7812500 0>;
91			max-brightness = <255>;
92			linux,default-trigger = "default-on";
93		};
94	};
95
96	sdio_pwrseq: sdio-pwrseq {
97		compatible = "mmc-pwrseq-simple";
98		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
99		clocks = <&wifi32k>;
100		clock-names = "ext_clock";
101	};
102
103	hdmi_5v: regulator-hdmi-5v {
104		compatible = "regulator-fixed";
105
106		regulator-name = "HDMI_5V";
107		regulator-min-microvolt = <5000000>;
108		regulator-max-microvolt = <5000000>;
109
110		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
111		enable-active-high;
112		regulator-always-on;
113	};
114
115	vcc_3v3: regulator-vcc_3v3 {
116		compatible = "regulator-fixed";
117		regulator-name = "VCC_3V3";
118		regulator-min-microvolt = <3300000>;
119		regulator-max-microvolt = <3300000>;
120	};
121
122	vddio_ao18: regulator-vddio_ao18 {
123		compatible = "regulator-fixed";
124		regulator-name = "VDDIO_AO18";
125		regulator-min-microvolt = <1800000>;
126		regulator-max-microvolt = <1800000>;
127	};
128
129	vddio_boot: regulator-vddio_boot {
130		compatible = "regulator-fixed";
131		regulator-name = "VDDIO_BOOT";
132		regulator-min-microvolt = <1800000>;
133		regulator-max-microvolt = <1800000>;
134	};
135
136	vddao_3v3: regulator-vddao_3v3 {
137		compatible = "regulator-fixed";
138		regulator-name = "VDDAO_3V3";
139		regulator-min-microvolt = <3300000>;
140		regulator-max-microvolt = <3300000>;
141	};
142
143	wifi32k: wifi32k {
144		compatible = "pwm-clock";
145		#clock-cells = <0>;
146		clock-frequency = <32768>;
147		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
148	};
149
150	sound {
151		compatible = "amlogic,gx-sound-card";
152		model = "KHADAS-VIM2";
153		assigned-clocks = <&clkc CLKID_MPLL0>,
154				  <&clkc CLKID_MPLL1>,
155				  <&clkc CLKID_MPLL2>;
156		assigned-clock-parents = <0>, <0>, <0>;
157		assigned-clock-rates = <294912000>,
158				       <270950400>,
159				       <393216000>;
160
161		dai-link-0 {
162			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
163		};
164
165		dai-link-1 {
166			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
167			dai-format = "i2s";
168			mclk-fs = <256>;
169
170			codec-0 {
171				sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
172			};
173		};
174
175		dai-link-2 {
176			sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
177
178			codec-0 {
179				sound-dai = <&hdmi_tx>;
180			};
181		};
182	};
183};
184
185&aiu {
186	status = "okay";
187};
188
189&cec_AO {
190	status = "okay";
191	pinctrl-0 = <&ao_cec_pins>;
192	pinctrl-names = "default";
193	hdmi-phandle = <&hdmi_tx>;
194};
195
196&cpu_cooling_maps {
197	map0 {
198		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
199	};
200
201	map1 {
202		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
203				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
204				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
205				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
206				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
207				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
208				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
209				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
210				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
211	};
212};
213
214&ethmac {
215	pinctrl-0 = <&eth_pins>;
216	pinctrl-names = "default";
217
218	/* Select external PHY by default */
219	phy-handle = <&external_phy>;
220
221	amlogic,tx-delay-ns = <2>;
222
223	/* External PHY is in RGMII */
224	phy-mode = "rgmii";
225
226	status = "okay";
227};
228
229&external_mdio {
230	external_phy: ethernet-phy@0 {
231		/* Realtek RTL8211F (0x001cc916) */
232		reg = <0>;
233
234		reset-assert-us = <10000>;
235		reset-deassert-us = <80000>;
236		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
237
238		interrupt-parent = <&gpio_intc>;
239		/* MAC_INTR on GPIOZ_15 */
240		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
241	};
242};
243
244&hdmi_tx {
245	status = "okay";
246	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
247	pinctrl-names = "default";
248	hdmi-supply = <&hdmi_5v>;
249};
250
251&hdmi_tx_tmds_port {
252	hdmi_tx_tmds_out: endpoint {
253		remote-endpoint = <&hdmi_connector_in>;
254	};
255};
256
257&i2c_A {
258	status = "okay";
259	pinctrl-0 = <&i2c_a_pins>;
260	pinctrl-names = "default";
261};
262
263&i2c_B {
264	status = "okay";
265	pinctrl-0 = <&i2c_b_pins>;
266	pinctrl-names = "default";
267
268	rtc: rtc@51 {
269		status = "okay";
270		compatible = "haoyu,hym8563";
271		reg = <0x51>;
272		#clock-cells = <0>;
273		clock-output-names = "xin32k";
274	};
275};
276
277&ir {
278	status = "okay";
279	pinctrl-0 = <&remote_input_ao_pins>;
280	pinctrl-names = "default";
281	linux,rc-map-name = "rc-khadas";
282};
283
284&pwm_AO_ab {
285	status = "okay";
286	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
287	pinctrl-names = "default";
288	clocks = <&clkc CLKID_FCLK_DIV4>;
289	clock-names = "clkin0";
290};
291
292&pwm_ef {
293	status = "okay";
294	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
295	pinctrl-names = "default";
296	clocks = <&clkc CLKID_FCLK_DIV4>;
297	clock-names = "clkin0";
298};
299
300&sd_emmc_a {
301	status = "okay";
302	pinctrl-0 = <&sdio_pins>;
303	pinctrl-1 = <&sdio_clk_gate_pins>;
304	pinctrl-names = "default", "clk-gate";
305	#address-cells = <1>;
306	#size-cells = <0>;
307
308	bus-width = <4>;
309	cap-sd-highspeed;
310	max-frequency = <100000000>;
311
312	non-removable;
313	disable-wp;
314
315	/* WiFi firmware requires power to be kept while in suspend */
316	keep-power-in-suspend;
317
318	mmc-pwrseq = <&sdio_pwrseq>;
319
320	vmmc-supply = <&vddao_3v3>;
321	vqmmc-supply = <&vddio_boot>;
322
323	brcmf: wifi@1 {
324		reg = <1>;
325		compatible = "brcm,bcm4329-fmac";
326	};
327};
328
329/* SD card */
330&sd_emmc_b {
331	status = "okay";
332	pinctrl-0 = <&sdcard_pins>;
333	pinctrl-1 = <&sdcard_clk_gate_pins>;
334	pinctrl-names = "default", "clk-gate";
335
336	bus-width = <4>;
337	cap-sd-highspeed;
338	max-frequency = <50000000>;
339	disable-wp;
340
341	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
342
343	vmmc-supply = <&vddao_3v3>;
344	vqmmc-supply = <&vddio_boot>;
345};
346
347/* eMMC */
348&sd_emmc_c {
349	status = "okay";
350	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
351	pinctrl-1 = <&emmc_clk_gate_pins>;
352	pinctrl-names = "default", "clk-gate";
353
354	bus-width = <8>;
355	cap-mmc-highspeed;
356	max-frequency = <200000000>;
357	non-removable;
358	disable-wp;
359	mmc-ddr-1_8v;
360	mmc-hs200-1_8v;
361
362	mmc-pwrseq = <&emmc_pwrseq>;
363	vmmc-supply = <&vcc_3v3>;
364	vqmmc-supply = <&vddio_boot>;
365};
366
367/*
368 * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
369 * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
370 */
371&spifc {
372	status = "disabled";
373	pinctrl-0 = <&nor_pins>;
374	pinctrl-names = "default";
375
376	w25q32: flash@0 {
377		#address-cells = <1>;
378		#size-cells = <1>;
379		compatible = "winbond,w25q16", "jedec,spi-nor";
380		reg = <0>;
381		spi-max-frequency = <104000000>;
382	};
383};
384
385/* This one is connected to the Bluetooth module */
386&uart_A {
387	status = "okay";
388	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
389	pinctrl-names = "default";
390	uart-has-rtscts;
391
392	bluetooth {
393		compatible = "brcm,bcm43438-bt";
394		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
395		max-speed = <2000000>;
396		clocks = <&wifi32k>;
397		clock-names = "lpo";
398	};
399};
400
401/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
402&uart_AO {
403	status = "okay";
404	pinctrl-0 = <&uart_ao_a_pins>;
405	pinctrl-names = "default";
406};
407
408/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
409&uart_AO_B {
410	status = "okay";
411	pinctrl-0 = <&uart_ao_b_pins>;
412	pinctrl-names = "default";
413};
414
415&saradc {
416	status = "okay";
417	vref-supply = <&vddio_ao18>;
418};
419
420&usb {
421	status = "okay";
422	dr_mode = "peripheral";
423};
424