1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
4 * Copyright (c) 2017 BayLibre, SAS
5 * Author: Neil Armstrong <narmstrong@baylibre.com>
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/thermal/thermal.h>
12
13#include "meson-gxm.dtsi"
14
15/ {
16	compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm";
17	model = "Khadas VIM2";
18
19	aliases {
20		serial0 = &uart_AO;
21		serial2 = &uart_AO_B;
22	};
23
24	chosen {
25		stdout-path = "serial0:115200n8";
26	};
27
28	memory@0 {
29		device_type = "memory";
30		reg = <0x0 0x0 0x0 0x80000000>;
31	};
32
33	adc-keys {
34		compatible = "adc-keys";
35		io-channels = <&saradc 0>;
36		io-channel-names = "buttons";
37		keyup-threshold-microvolt = <1710000>;
38
39		button-function {
40			label = "Function";
41			linux,code = <KEY_FN>;
42			press-threshold-microvolt = <10000>;
43		};
44	};
45
46	emmc_pwrseq: emmc-pwrseq {
47		compatible = "mmc-pwrseq-emmc";
48		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
49	};
50
51	gpio_fan: gpio-fan {
52		compatible = "gpio-fan";
53		gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH
54			 &gpio GPIODV_15 GPIO_ACTIVE_HIGH>;
55		/* Dummy RPM values since fan is optional */
56		gpio-fan,speed-map = <0 0
57				      1 1
58				      2 2
59				      3 3>;
60		#cooling-cells = <2>;
61	};
62
63	gpio-keys-polled {
64		compatible = "gpio-keys-polled";
65		poll-interval = <100>;
66
67		power-button {
68			label = "power";
69			linux,code = <KEY_POWER>;
70			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
71		};
72	};
73
74	hdmi-connector {
75		compatible = "hdmi-connector";
76		type = "a";
77
78		port {
79			hdmi_connector_in: endpoint {
80				remote-endpoint = <&hdmi_tx_tmds_out>;
81			};
82		};
83	};
84
85	pwmleds {
86		compatible = "pwm-leds";
87
88		power {
89			label = "vim:red:power";
90			pwms = <&pwm_AO_ab 1 7812500 0>;
91			max-brightness = <255>;
92			linux,default-trigger = "default-on";
93		};
94	};
95
96	sdio_pwrseq: sdio-pwrseq {
97		compatible = "mmc-pwrseq-simple";
98		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
99		clocks = <&wifi32k>;
100		clock-names = "ext_clock";
101	};
102
103	thermal-zones {
104		cpu-thermal {
105			polling-delay-passive = <250>; /* milliseconds */
106			polling-delay = <1000>; /* milliseconds */
107
108			thermal-sensors = <&scpi_sensors 0>;
109
110			trips {
111				cpu_alert0: cpu-alert0 {
112					temperature = <70000>; /* millicelsius */
113					hysteresis = <2000>; /* millicelsius */
114					type = "active";
115				};
116
117				cpu_alert1: cpu-alert1 {
118					temperature = <80000>; /* millicelsius */
119					hysteresis = <2000>; /* millicelsius */
120					type = "passive";
121				};
122			};
123
124			cooling-maps {
125				map0 {
126					trip = <&cpu_alert0>;
127					cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
128				};
129
130				map1 {
131					trip = <&cpu_alert1>;
132					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
133							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
134							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
135							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
136							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
137							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
138							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
139							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
140							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
141				};
142			};
143		};
144	};
145
146	hdmi_5v: regulator-hdmi-5v {
147		compatible = "regulator-fixed";
148
149		regulator-name = "HDMI_5V";
150		regulator-min-microvolt = <5000000>;
151		regulator-max-microvolt = <5000000>;
152
153		gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
154		enable-active-high;
155		regulator-always-on;
156	};
157
158	vcc_3v3: regulator-vcc_3v3 {
159		compatible = "regulator-fixed";
160		regulator-name = "VCC_3V3";
161		regulator-min-microvolt = <3300000>;
162		regulator-max-microvolt = <3300000>;
163	};
164
165	vddio_ao18: regulator-vddio_ao18 {
166		compatible = "regulator-fixed";
167		regulator-name = "VDDIO_AO18";
168		regulator-min-microvolt = <1800000>;
169		regulator-max-microvolt = <1800000>;
170	};
171
172	vddio_boot: regulator-vddio_boot {
173		compatible = "regulator-fixed";
174		regulator-name = "VDDIO_BOOT";
175		regulator-min-microvolt = <1800000>;
176		regulator-max-microvolt = <1800000>;
177	};
178
179	vddao_3v3: regulator-vddao_3v3 {
180		compatible = "regulator-fixed";
181		regulator-name = "VDDAO_3V3";
182		regulator-min-microvolt = <3300000>;
183		regulator-max-microvolt = <3300000>;
184	};
185
186	wifi32k: wifi32k {
187		compatible = "pwm-clock";
188		#clock-cells = <0>;
189		clock-frequency = <32768>;
190		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
191	};
192};
193
194&cec_AO {
195	status = "okay";
196	pinctrl-0 = <&ao_cec_pins>;
197	pinctrl-names = "default";
198	hdmi-phandle = <&hdmi_tx>;
199};
200
201&cpu0 {
202	#cooling-cells = <2>;
203};
204
205&cpu1 {
206	#cooling-cells = <2>;
207};
208
209&cpu2 {
210	#cooling-cells = <2>;
211};
212
213&cpu3 {
214	#cooling-cells = <2>;
215};
216
217&cpu4 {
218	#cooling-cells = <2>;
219};
220
221&cpu5 {
222	#cooling-cells = <2>;
223};
224
225&cpu6 {
226	#cooling-cells = <2>;
227};
228
229&cpu7 {
230	#cooling-cells = <2>;
231};
232
233&ethmac {
234	pinctrl-0 = <&eth_pins>;
235	pinctrl-names = "default";
236
237	/* Select external PHY by default */
238	phy-handle = <&external_phy>;
239
240	amlogic,tx-delay-ns = <2>;
241
242	/* External PHY is in RGMII */
243	phy-mode = "rgmii";
244
245	status = "okay";
246};
247
248&external_mdio {
249	external_phy: ethernet-phy@0 {
250		/* Realtek RTL8211F (0x001cc916) */
251		reg = <0>;
252
253		reset-assert-us = <10000>;
254		reset-deassert-us = <30000>;
255		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
256
257		interrupt-parent = <&gpio_intc>;
258		/* MAC_INTR on GPIOZ_15 */
259		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
260	};
261};
262
263&hdmi_tx {
264	status = "okay";
265	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
266	pinctrl-names = "default";
267	hdmi-supply = <&hdmi_5v>;
268};
269
270&hdmi_tx_tmds_port {
271	hdmi_tx_tmds_out: endpoint {
272		remote-endpoint = <&hdmi_connector_in>;
273	};
274};
275
276&i2c_A {
277	status = "okay";
278	pinctrl-0 = <&i2c_a_pins>;
279	pinctrl-names = "default";
280};
281
282&i2c_B {
283	status = "okay";
284	pinctrl-0 = <&i2c_b_pins>;
285	pinctrl-names = "default";
286
287	rtc: rtc@51 {
288		/* has to be enabled manually when a battery is connected: */
289		status = "disabled";
290		compatible = "haoyu,hym8563";
291		reg = <0x51>;
292		#clock-cells = <0>;
293		clock-frequency = <32768>;
294		clock-output-names = "xin32k";
295	};
296};
297
298&ir {
299	status = "okay";
300	pinctrl-0 = <&remote_input_ao_pins>;
301	pinctrl-names = "default";
302	linux,rc-map-name = "rc-geekbox";
303};
304
305&pwm_AO_ab {
306	status = "okay";
307	pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>;
308	pinctrl-names = "default";
309	clocks = <&clkc CLKID_FCLK_DIV4>;
310	clock-names = "clkin0";
311};
312
313&pwm_ef {
314	status = "okay";
315	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
316	pinctrl-names = "default";
317	clocks = <&clkc CLKID_FCLK_DIV4>;
318	clock-names = "clkin0";
319};
320
321&sd_emmc_a {
322	status = "okay";
323	pinctrl-0 = <&sdio_pins>;
324	pinctrl-1 = <&sdio_clk_gate_pins>;
325	pinctrl-names = "default", "clk-gate";
326	#address-cells = <1>;
327	#size-cells = <0>;
328
329	bus-width = <4>;
330	max-frequency = <50000000>;
331
332	non-removable;
333	disable-wp;
334
335	mmc-pwrseq = <&sdio_pwrseq>;
336
337	vmmc-supply = <&vddao_3v3>;
338	vqmmc-supply = <&vddio_boot>;
339
340	brcmf: wifi@1 {
341		reg = <1>;
342		compatible = "brcm,bcm4329-fmac";
343	};
344};
345
346/* SD card */
347&sd_emmc_b {
348	status = "okay";
349	pinctrl-0 = <&sdcard_pins>;
350	pinctrl-1 = <&sdcard_clk_gate_pins>;
351	pinctrl-names = "default", "clk-gate";
352
353	bus-width = <4>;
354	cap-sd-highspeed;
355	max-frequency = <50000000>;
356	disable-wp;
357
358	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
359
360	vmmc-supply = <&vddao_3v3>;
361	vqmmc-supply = <&vddio_boot>;
362};
363
364/* eMMC */
365&sd_emmc_c {
366	status = "okay";
367	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
368	pinctrl-1 = <&emmc_clk_gate_pins>;
369	pinctrl-names = "default", "clk-gate";
370
371	bus-width = <8>;
372	cap-mmc-highspeed;
373	max-frequency = <200000000>;
374	non-removable;
375	disable-wp;
376	mmc-ddr-1_8v;
377	mmc-hs200-1_8v;
378
379	mmc-pwrseq = <&emmc_pwrseq>;
380	vmmc-supply = <&vcc_3v3>;
381	vqmmc-supply = <&vddio_boot>;
382};
383
384/*
385 * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe
386 * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled
387 */
388&spifc {
389	status = "disabled";
390	pinctrl-0 = <&nor_pins>;
391	pinctrl-names = "default";
392
393	w25q32: spi-flash@0 {
394		#address-cells = <1>;
395		#size-cells = <1>;
396		compatible = "winbond,w25q16", "jedec,spi-nor";
397		reg = <0>;
398		spi-max-frequency = <3000000>;
399	};
400};
401
402/* This one is connected to the Bluetooth module */
403&uart_A {
404	status = "okay";
405	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
406	pinctrl-names = "default";
407	uart-has-rtscts;
408
409	bluetooth {
410		compatible = "brcm,bcm43438-bt";
411		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
412	};
413};
414
415/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
416&uart_AO {
417	status = "okay";
418	pinctrl-0 = <&uart_ao_a_pins>;
419	pinctrl-names = "default";
420};
421
422/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */
423&uart_AO_B {
424	status = "okay";
425	pinctrl-0 = <&uart_ao_b_pins>;
426	pinctrl-names = "default";
427};
428
429&saradc {
430	status = "okay";
431	vref-supply = <&vddio_ao18>;
432};
433
434&usb0 {
435	status = "okay";
436};
437