1/*
2 * Copyright (c) 2016 Andreas Färber
3 * Copyright (c) 2016 BayLibre, Inc.
4 * Author: Kevin Hilman <khilman@kernel.org>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This library is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This library is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45#include "meson-gxbb.dtsi"
46
47/ {
48	aliases {
49		serial0 = &uart_AO;
50	};
51
52	chosen {
53		stdout-path = "serial0:115200n8";
54	};
55
56	memory@0 {
57		device_type = "memory";
58		reg = <0x0 0x0 0x0 0x40000000>;
59	};
60
61	usb_pwr: regulator-usb-pwrs {
62		compatible = "regulator-fixed";
63
64		regulator-name = "USB_PWR";
65
66		regulator-min-microvolt = <5000000>;
67		regulator-max-microvolt = <5000000>;
68
69		/* signal name in schematic: USB_PWR_EN */
70		gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
71		enable-active-high;
72	};
73
74	vddio_card: gpio-regulator {
75		compatible = "regulator-gpio";
76
77		regulator-name = "VDDIO_CARD";
78		regulator-min-microvolt = <1800000>;
79		regulator-max-microvolt = <3300000>;
80
81		gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
82		gpios-states = <1>;
83
84		/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
85		states = <1800000 0
86			  3300000 1>;
87	};
88
89	vddio_boot: regulator-vddio_boot {
90		compatible = "regulator-fixed";
91		regulator-name = "VDDIO_BOOT";
92		regulator-min-microvolt = <1800000>;
93		regulator-max-microvolt = <1800000>;
94	};
95
96	vddao_3v3: regulator-vddao_3v3 {
97		compatible = "regulator-fixed";
98		regulator-name = "VDDAO_3V3";
99		regulator-min-microvolt = <3300000>;
100		regulator-max-microvolt = <3300000>;
101	};
102
103	vcc_3v3: regulator-vcc_3v3 {
104		compatible = "regulator-fixed";
105		regulator-name = "VCC_3V3";
106		regulator-min-microvolt = <3300000>;
107		regulator-max-microvolt = <3300000>;
108	};
109
110	emmc_pwrseq: emmc-pwrseq {
111		compatible = "mmc-pwrseq-emmc";
112		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
113	};
114
115	wifi32k: wifi32k {
116		compatible = "pwm-clock";
117		#clock-cells = <0>;
118		clock-frequency = <32768>;
119		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
120	};
121
122	sdio_pwrseq: sdio-pwrseq {
123		compatible = "mmc-pwrseq-simple";
124		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
125		clocks = <&wifi32k>;
126		clock-names = "ext_clock";
127	};
128
129	cvbs_connector: cvbs-connector {
130		compatible = "composite-video-connector";
131
132		port {
133			cvbs_connector_in: endpoint {
134				remote-endpoint = <&cvbs_vdac_out>;
135			};
136		};
137	};
138
139	hdmi-connector {
140		compatible = "hdmi-connector";
141		type = "a";
142
143		port {
144			hdmi_connector_in: endpoint {
145				remote-endpoint = <&hdmi_tx_tmds_out>;
146			};
147		};
148	};
149};
150
151&cvbs_vdac_port {
152	cvbs_vdac_out: endpoint {
153		remote-endpoint = <&cvbs_connector_in>;
154	};
155};
156
157&hdmi_tx {
158	status = "okay";
159	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
160	pinctrl-names = "default";
161};
162
163&hdmi_tx_tmds_port {
164	hdmi_tx_tmds_out: endpoint {
165		remote-endpoint = <&hdmi_connector_in>;
166	};
167};
168
169&ir {
170	status = "okay";
171	pinctrl-0 = <&remote_input_ao_pins>;
172	pinctrl-names = "default";
173};
174
175&pwm_ef {
176	status = "okay";
177	pinctrl-0 = <&pwm_e_pins>;
178	pinctrl-names = "default";
179	clocks = <&clkc CLKID_FCLK_DIV4>;
180	clock-names = "clkin0";
181};
182
183/* Wireless SDIO Module */
184&sd_emmc_a {
185	status = "okay";
186	pinctrl-0 = <&sdio_pins>;
187	pinctrl-names = "default";
188	#address-cells = <1>;
189	#size-cells = <0>;
190
191	bus-width = <4>;
192	cap-sd-highspeed;
193	max-frequency = <100000000>;
194
195	non-removable;
196	disable-wp;
197
198	mmc-pwrseq = <&sdio_pwrseq>;
199
200	vmmc-supply = <&vddao_3v3>;
201	vqmmc-supply = <&vddio_boot>;
202
203	brcmf: wifi@1 {
204		reg = <1>;
205		compatible = "brcm,bcm4329-fmac";
206	};
207};
208
209/* SD card */
210&sd_emmc_b {
211	status = "okay";
212	pinctrl-0 = <&sdcard_pins>;
213	pinctrl-names = "default";
214
215	bus-width = <4>;
216	cap-sd-highspeed;
217	max-frequency = <100000000>;
218	disable-wp;
219
220	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
221	cd-inverted;
222
223	vmmc-supply = <&vddao_3v3>;
224	vqmmc-supply = <&vddio_card>;
225};
226
227/* eMMC */
228&sd_emmc_c {
229	status = "okay";
230	pinctrl-0 = <&emmc_pins>;
231	pinctrl-names = "default";
232
233	bus-width = <8>;
234	cap-sd-highspeed;
235	cap-mmc-highspeed;
236	max-frequency = <200000000>;
237	non-removable;
238	disable-wp;
239	mmc-ddr-1_8v;
240	mmc-hs200-1_8v;
241
242	mmc-pwrseq = <&emmc_pwrseq>;
243	vmmc-supply = <&vcc_3v3>;
244	vqmmc-supply = <&vddio_boot>;
245};
246
247/* This UART is brought out to the DB9 connector */
248&uart_AO {
249	status = "okay";
250	pinctrl-0 = <&uart_ao_a_pins>;
251	pinctrl-names = "default";
252};
253
254&usb0_phy {
255	status = "okay";
256	phy-supply = <&usb_pwr>;
257};
258
259&usb1_phy {
260	status = "okay";
261};
262
263&usb0 {
264	status = "okay";
265};
266
267&usb1 {
268	status = "okay";
269};
270