1/* 2 * Copyright (c) 2016 Andreas Färber 3 * 4 * Copyright (c) 2016 BayLibre, SAS. 5 * Author: Neil Armstrong <narmstrong@baylibre.com> 6 * 7 * Copyright (c) 2016 Endless Computers, Inc. 8 * Author: Carlo Caione <carlo@endlessm.com> 9 * 10 * This file is dual-licensed: you can use it either under the terms 11 * of the GPL or the X11 license, at your option. Note that this dual 12 * licensing only applies to this file, and not this project as a 13 * whole. 14 * 15 * a) This library is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU General Public License as 17 * published by the Free Software Foundation; either version 2 of the 18 * License, or (at your option) any later version. 19 * 20 * This library is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 * Or, alternatively, 26 * 27 * b) Permission is hereby granted, free of charge, to any person 28 * obtaining a copy of this software and associated documentation 29 * files (the "Software"), to deal in the Software without 30 * restriction, including without limitation the rights to use, 31 * copy, modify, merge, publish, distribute, sublicense, and/or 32 * sell copies of the Software, and to permit persons to whom the 33 * Software is furnished to do so, subject to the following 34 * conditions: 35 * 36 * The above copyright notice and this permission notice shall be 37 * included in all copies or substantial portions of the Software. 38 * 39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 46 * OTHER DEALINGS IN THE SOFTWARE. 47 */ 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/interrupt-controller/irq.h> 51#include <dt-bindings/interrupt-controller/arm-gic.h> 52 53/ { 54 interrupt-parent = <&gic>; 55 #address-cells = <2>; 56 #size-cells = <2>; 57 58 reserved-memory { 59 #address-cells = <2>; 60 #size-cells = <2>; 61 ranges; 62 63 /* 16 MiB reserved for Hardware ROM Firmware */ 64 hwrom_reserved: hwrom@0 { 65 reg = <0x0 0x0 0x0 0x1000000>; 66 no-map; 67 }; 68 69 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ 70 secmon_reserved: secmon@10000000 { 71 reg = <0x0 0x10000000 0x0 0x200000>; 72 no-map; 73 }; 74 75 linux,cma { 76 compatible = "shared-dma-pool"; 77 reusable; 78 size = <0x0 0xbc00000>; 79 alignment = <0x0 0x400000>; 80 linux,cma-default; 81 }; 82 }; 83 84 cpus { 85 #address-cells = <0x2>; 86 #size-cells = <0x0>; 87 88 cpu0: cpu@0 { 89 device_type = "cpu"; 90 compatible = "arm,cortex-a53", "arm,armv8"; 91 reg = <0x0 0x0>; 92 enable-method = "psci"; 93 next-level-cache = <&l2>; 94 clocks = <&scpi_dvfs 0>; 95 }; 96 97 cpu1: cpu@1 { 98 device_type = "cpu"; 99 compatible = "arm,cortex-a53", "arm,armv8"; 100 reg = <0x0 0x1>; 101 enable-method = "psci"; 102 next-level-cache = <&l2>; 103 clocks = <&scpi_dvfs 0>; 104 }; 105 106 cpu2: cpu@2 { 107 device_type = "cpu"; 108 compatible = "arm,cortex-a53", "arm,armv8"; 109 reg = <0x0 0x2>; 110 enable-method = "psci"; 111 next-level-cache = <&l2>; 112 clocks = <&scpi_dvfs 0>; 113 }; 114 115 cpu3: cpu@3 { 116 device_type = "cpu"; 117 compatible = "arm,cortex-a53", "arm,armv8"; 118 reg = <0x0 0x3>; 119 enable-method = "psci"; 120 next-level-cache = <&l2>; 121 clocks = <&scpi_dvfs 0>; 122 }; 123 124 l2: l2-cache0 { 125 compatible = "cache"; 126 }; 127 }; 128 129 arm-pmu { 130 compatible = "arm,cortex-a53-pmu"; 131 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 132 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 133 <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, 134 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; 135 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; 136 }; 137 138 psci { 139 compatible = "arm,psci-0.2"; 140 method = "smc"; 141 }; 142 143 timer { 144 compatible = "arm,armv8-timer"; 145 interrupts = <GIC_PPI 13 146 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 147 <GIC_PPI 14 148 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 149 <GIC_PPI 11 150 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, 151 <GIC_PPI 10 152 (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; 153 }; 154 155 xtal: xtal-clk { 156 compatible = "fixed-clock"; 157 clock-frequency = <24000000>; 158 clock-output-names = "xtal"; 159 #clock-cells = <0>; 160 }; 161 162 firmware { 163 sm: secure-monitor { 164 compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; 165 }; 166 }; 167 168 efuse: efuse { 169 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; 170 #address-cells = <1>; 171 #size-cells = <1>; 172 173 sn: sn@14 { 174 reg = <0x14 0x10>; 175 }; 176 177 eth_mac: eth_mac@34 { 178 reg = <0x34 0x10>; 179 }; 180 181 bid: bid@46 { 182 reg = <0x46 0x30>; 183 }; 184 }; 185 186 scpi { 187 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; 188 mboxes = <&mailbox 1 &mailbox 2>; 189 shmem = <&cpu_scp_lpri &cpu_scp_hpri>; 190 191 scpi_clocks: clocks { 192 compatible = "arm,scpi-clocks"; 193 194 scpi_dvfs: scpi_clocks@0 { 195 compatible = "arm,scpi-dvfs-clocks"; 196 #clock-cells = <1>; 197 clock-indices = <0>; 198 clock-output-names = "vcpu"; 199 }; 200 }; 201 202 scpi_sensors: sensors { 203 compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; 204 #thermal-sensor-cells = <1>; 205 }; 206 }; 207 208 soc { 209 compatible = "simple-bus"; 210 #address-cells = <2>; 211 #size-cells = <2>; 212 ranges; 213 214 cbus: cbus@c1100000 { 215 compatible = "simple-bus"; 216 reg = <0x0 0xc1100000 0x0 0x100000>; 217 #address-cells = <2>; 218 #size-cells = <2>; 219 ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; 220 221 reset: reset-controller@4404 { 222 compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; 223 reg = <0x0 0x04404 0x0 0x20>; 224 #reset-cells = <1>; 225 }; 226 227 uart_A: serial@84c0 { 228 compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; 229 reg = <0x0 0x84c0 0x0 0x14>; 230 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; 231 clocks = <&xtal>; 232 status = "disabled"; 233 }; 234 235 uart_B: serial@84dc { 236 compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; 237 reg = <0x0 0x84dc 0x0 0x14>; 238 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; 239 clocks = <&xtal>; 240 status = "disabled"; 241 }; 242 243 i2c_A: i2c@8500 { 244 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 245 reg = <0x0 0x08500 0x0 0x20>; 246 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; 247 #address-cells = <1>; 248 #size-cells = <0>; 249 status = "disabled"; 250 }; 251 252 pwm_ab: pwm@8550 { 253 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 254 reg = <0x0 0x08550 0x0 0x10>; 255 #pwm-cells = <3>; 256 status = "disabled"; 257 }; 258 259 pwm_cd: pwm@8650 { 260 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 261 reg = <0x0 0x08650 0x0 0x10>; 262 #pwm-cells = <3>; 263 status = "disabled"; 264 }; 265 266 saradc: adc@8680 { 267 compatible = "amlogic,meson-saradc"; 268 reg = <0x0 0x8680 0x0 0x34>; 269 #io-channel-cells = <1>; 270 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; 271 status = "disabled"; 272 }; 273 274 pwm_ef: pwm@86c0 { 275 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; 276 reg = <0x0 0x086c0 0x0 0x10>; 277 #pwm-cells = <3>; 278 status = "disabled"; 279 }; 280 281 uart_C: serial@8700 { 282 compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; 283 reg = <0x0 0x8700 0x0 0x14>; 284 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; 285 clocks = <&xtal>; 286 status = "disabled"; 287 }; 288 289 i2c_B: i2c@87c0 { 290 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 291 reg = <0x0 0x087c0 0x0 0x20>; 292 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; 293 #address-cells = <1>; 294 #size-cells = <0>; 295 status = "disabled"; 296 }; 297 298 i2c_C: i2c@87e0 { 299 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 300 reg = <0x0 0x087e0 0x0 0x20>; 301 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; 302 #address-cells = <1>; 303 #size-cells = <0>; 304 status = "disabled"; 305 }; 306 307 spicc: spi@8d80 { 308 compatible = "amlogic,meson-gx-spicc"; 309 reg = <0x0 0x08d80 0x0 0x80>; 310 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; 311 #address-cells = <1>; 312 #size-cells = <0>; 313 status = "disabled"; 314 }; 315 316 spifc: spi@8c80 { 317 compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; 318 reg = <0x0 0x08c80 0x0 0x80>; 319 #address-cells = <1>; 320 #size-cells = <0>; 321 status = "disabled"; 322 }; 323 324 watchdog@98d0 { 325 compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; 326 reg = <0x0 0x098d0 0x0 0x10>; 327 clocks = <&xtal>; 328 }; 329 }; 330 331 gic: interrupt-controller@c4301000 { 332 compatible = "arm,gic-400"; 333 reg = <0x0 0xc4301000 0 0x1000>, 334 <0x0 0xc4302000 0 0x2000>, 335 <0x0 0xc4304000 0 0x2000>, 336 <0x0 0xc4306000 0 0x2000>; 337 interrupt-controller; 338 interrupts = <GIC_PPI 9 339 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; 340 #interrupt-cells = <3>; 341 #address-cells = <0>; 342 }; 343 344 sram: sram@c8000000 { 345 compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; 346 reg = <0x0 0xc8000000 0x0 0x14000>; 347 348 #address-cells = <1>; 349 #size-cells = <1>; 350 ranges = <0 0x0 0xc8000000 0x14000>; 351 352 cpu_scp_lpri: scp-shmem@0 { 353 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; 354 reg = <0x13000 0x400>; 355 }; 356 357 cpu_scp_hpri: scp-shmem@200 { 358 compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; 359 reg = <0x13400 0x400>; 360 }; 361 }; 362 363 aobus: aobus@c8100000 { 364 compatible = "simple-bus"; 365 reg = <0x0 0xc8100000 0x0 0x100000>; 366 #address-cells = <2>; 367 #size-cells = <2>; 368 ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; 369 370 sysctrl_AO: sys-ctrl@0 { 371 compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; 372 reg = <0x0 0x0 0x0 0x100>; 373 374 clkc_AO: clock-controller { 375 compatible = "amlogic,meson-gx-aoclkc"; 376 #clock-cells = <1>; 377 #reset-cells = <1>; 378 }; 379 }; 380 381 cec_AO: cec@100 { 382 compatible = "amlogic,meson-gx-ao-cec"; 383 reg = <0x0 0x00100 0x0 0x14>; 384 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; 385 }; 386 387 sec_AO: ao-secure@140 { 388 compatible = "amlogic,meson-gx-ao-secure", "syscon"; 389 reg = <0x0 0x140 0x0 0x140>; 390 amlogic,has-chip-id; 391 }; 392 393 uart_AO: serial@4c0 { 394 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; 395 reg = <0x0 0x004c0 0x0 0x14>; 396 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; 397 status = "disabled"; 398 }; 399 400 uart_AO_B: serial@4e0 { 401 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; 402 reg = <0x0 0x004e0 0x0 0x14>; 403 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; 404 status = "disabled"; 405 }; 406 407 i2c_AO: i2c@500 { 408 compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; 409 reg = <0x0 0x500 0x0 0x20>; 410 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; 411 #address-cells = <1>; 412 #size-cells = <0>; 413 status = "disabled"; 414 }; 415 416 pwm_AO_ab: pwm@550 { 417 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; 418 reg = <0x0 0x00550 0x0 0x10>; 419 #pwm-cells = <3>; 420 status = "disabled"; 421 }; 422 423 ir: ir@580 { 424 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; 425 reg = <0x0 0x00580 0x0 0x40>; 426 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; 427 status = "disabled"; 428 }; 429 }; 430 431 periphs: periphs@c8834000 { 432 compatible = "simple-bus"; 433 reg = <0x0 0xc8834000 0x0 0x2000>; 434 #address-cells = <2>; 435 #size-cells = <2>; 436 ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; 437 438 hwrng: rng { 439 compatible = "amlogic,meson-rng"; 440 reg = <0x0 0x0 0x0 0x4>; 441 }; 442 }; 443 444 hiubus: hiubus@c883c000 { 445 compatible = "simple-bus"; 446 reg = <0x0 0xc883c000 0x0 0x2000>; 447 #address-cells = <2>; 448 #size-cells = <2>; 449 ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; 450 451 mailbox: mailbox@404 { 452 compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; 453 reg = <0 0x404 0 0x4c>; 454 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, 455 <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, 456 <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>; 457 #mbox-cells = <1>; 458 }; 459 }; 460 461 ethmac: ethernet@c9410000 { 462 compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; 463 reg = <0x0 0xc9410000 0x0 0x10000 464 0x0 0xc8834540 0x0 0x4>; 465 interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; 466 interrupt-names = "macirq"; 467 status = "disabled"; 468 }; 469 470 apb: apb@d0000000 { 471 compatible = "simple-bus"; 472 reg = <0x0 0xd0000000 0x0 0x200000>; 473 #address-cells = <2>; 474 #size-cells = <2>; 475 ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; 476 477 sd_emmc_a: mmc@70000 { 478 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 479 reg = <0x0 0x70000 0x0 0x2000>; 480 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; 481 status = "disabled"; 482 }; 483 484 sd_emmc_b: mmc@72000 { 485 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 486 reg = <0x0 0x72000 0x0 0x2000>; 487 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; 488 status = "disabled"; 489 }; 490 491 sd_emmc_c: mmc@74000 { 492 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; 493 reg = <0x0 0x74000 0x0 0x2000>; 494 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; 495 status = "disabled"; 496 }; 497 }; 498 499 vpu: vpu@d0100000 { 500 compatible = "amlogic,meson-gx-vpu"; 501 reg = <0x0 0xd0100000 0x0 0x100000>, 502 <0x0 0xc883c000 0x0 0x1000>, 503 <0x0 0xc8838000 0x0 0x1000>; 504 reg-names = "vpu", "hhi", "dmc"; 505 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 506 #address-cells = <1>; 507 #size-cells = <0>; 508 509 /* CVBS VDAC output port */ 510 cvbs_vdac_port: port@0 { 511 reg = <0>; 512 }; 513 514 /* HDMI-TX output port */ 515 hdmi_tx_port: port@1 { 516 reg = <1>; 517 518 hdmi_tx_out: endpoint { 519 remote-endpoint = <&hdmi_tx_in>; 520 }; 521 }; 522 }; 523 524 hdmi_tx: hdmi-tx@c883a000 { 525 compatible = "amlogic,meson-gx-dw-hdmi"; 526 reg = <0x0 0xc883a000 0x0 0x1c>; 527 interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; 528 #address-cells = <1>; 529 #size-cells = <0>; 530 status = "disabled"; 531 532 /* VPU VENC Input */ 533 hdmi_tx_venc_port: port@0 { 534 reg = <0>; 535 536 hdmi_tx_in: endpoint { 537 remote-endpoint = <&hdmi_tx_out>; 538 }; 539 }; 540 541 /* TMDS Output */ 542 hdmi_tx_tmds_port: port@1 { 543 reg = <1>; 544 }; 545 }; 546 }; 547}; 548