1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
3
4/dts-v1/;
5
6#include "sun50i-h6.dtsi"
7#include "sun50i-h6-cpu-opp.dtsi"
8
9#include <dt-bindings/gpio/gpio.h>
10
11/ {
12	model = "Tanix TX6";
13	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
14
15	aliases {
16		serial0 = &uart0;
17	};
18
19	chosen {
20		stdout-path = "serial0:115200n8";
21	};
22
23	connector {
24		compatible = "hdmi-connector";
25		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
26		type = "a";
27
28		port {
29			hdmi_con_in: endpoint {
30				remote-endpoint = <&hdmi_out_con>;
31			};
32		};
33	};
34
35	reg_vcc1v8: regulator-vcc1v8 {
36		compatible = "regulator-fixed";
37		regulator-name = "vcc1v8";
38		regulator-min-microvolt = <1800000>;
39		regulator-max-microvolt = <1800000>;
40	};
41
42	reg_vcc3v3: regulator-vcc3v3 {
43		compatible = "regulator-fixed";
44		regulator-name = "vcc3v3";
45		regulator-min-microvolt = <3300000>;
46		regulator-max-microvolt = <3300000>;
47	};
48
49	reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
50		compatible = "regulator-fixed";
51		regulator-name = "vdd-cpu-gpu";
52		regulator-min-microvolt = <1135000>;
53		regulator-max-microvolt = <1135000>;
54	};
55};
56
57&cpu0 {
58	cpu-supply = <&reg_vdd_cpu_gpu>;
59};
60
61&de {
62	status = "okay";
63};
64
65&dwc3 {
66	status = "okay";
67};
68
69&ehci0 {
70	status = "okay";
71};
72
73&ehci3 {
74	status = "okay";
75};
76
77&gpu {
78	mali-supply = <&reg_vdd_cpu_gpu>;
79	status = "okay";
80};
81
82&hdmi {
83	status = "okay";
84};
85
86&hdmi_out {
87	hdmi_out_con: endpoint {
88		remote-endpoint = <&hdmi_con_in>;
89	};
90};
91
92&mmc0 {
93	pinctrl-names = "default";
94	pinctrl-0 = <&mmc0_pins>;
95	vmmc-supply = <&reg_vcc3v3>;
96	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
97	bus-width = <4>;
98	status = "okay";
99};
100
101&mmc2 {
102	vmmc-supply = <&reg_vcc3v3>;
103	vqmmc-supply = <&reg_vcc1v8>;
104	bus-width = <8>;
105	non-removable;
106	cap-mmc-hw-reset;
107	mmc-hs200-1_8v;
108	status = "okay";
109};
110
111&ohci0 {
112	status = "okay";
113};
114
115&ohci3 {
116	status = "okay";
117};
118
119&pio {
120	vcc-pc-supply = <&reg_vcc1v8>;
121	vcc-pd-supply = <&reg_vcc3v3>;
122	vcc-pg-supply = <&reg_vcc1v8>;
123};
124
125&r_ir {
126	linux,rc-map-name = "rc-tanix-tx5max";
127	status = "okay";
128};
129
130&uart0 {
131	pinctrl-names = "default";
132	pinctrl-0 = <&uart0_ph_pins>;
133	status = "okay";
134};
135
136&usb2otg {
137	dr_mode = "host";
138	status = "okay";
139};
140
141&usb2phy {
142	status = "okay";
143};
144
145&usb3phy {
146	status = "okay";
147};
148