1// SPDX-License-Identifier: (GPL-2.0+ or MIT) 2/* 3 * Copyright (C) 2018 Amarula Solutions 4 * Author: Jagan Teki <jagan@amarulasolutions.com> 5 */ 6 7/dts-v1/; 8 9#include "sun50i-h6.dtsi" 10 11#include <dt-bindings/gpio/gpio.h> 12 13/ { 14 model = "OrangePi One Plus"; 15 compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; 16 17 aliases { 18 serial0 = &uart0; 19 }; 20 21 chosen { 22 stdout-path = "serial0:115200n8"; 23 }; 24 25 leds { 26 compatible = "gpio-leds"; 27 28 power { 29 label = "orangepi:red:power"; 30 gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ 31 default-state = "on"; 32 }; 33 34 status { 35 label = "orangepi:green:status"; 36 gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ 37 }; 38 }; 39 40 reg_vcc5v: vcc5v { 41 /* board wide 5V supply directly from the DC jack */ 42 compatible = "regulator-fixed"; 43 regulator-name = "vcc-5v"; 44 regulator-min-microvolt = <5000000>; 45 regulator-max-microvolt = <5000000>; 46 regulator-always-on; 47 }; 48}; 49 50&ehci0 { 51 status = "okay"; 52}; 53 54&ehci3 { 55 status = "okay"; 56}; 57 58&mmc0 { 59 pinctrl-names = "default"; 60 pinctrl-0 = <&mmc0_pins>; 61 vmmc-supply = <®_cldo1>; 62 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; 63 bus-width = <4>; 64 status = "okay"; 65}; 66 67&ohci0 { 68 status = "okay"; 69}; 70 71&ohci3 { 72 status = "okay"; 73}; 74 75&r_i2c { 76 status = "okay"; 77 78 axp805: pmic@36 { 79 compatible = "x-powers,axp805", "x-powers,axp806"; 80 reg = <0x36>; 81 interrupt-parent = <&r_intc>; 82 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 83 interrupt-controller; 84 #interrupt-cells = <1>; 85 x-powers,self-working-mode; 86 vina-supply = <®_vcc5v>; 87 vinb-supply = <®_vcc5v>; 88 vinc-supply = <®_vcc5v>; 89 vind-supply = <®_vcc5v>; 90 vine-supply = <®_vcc5v>; 91 aldoin-supply = <®_vcc5v>; 92 bldoin-supply = <®_vcc5v>; 93 cldoin-supply = <®_vcc5v>; 94 95 regulators { 96 reg_aldo1: aldo1 { 97 regulator-always-on; 98 regulator-min-microvolt = <3300000>; 99 regulator-max-microvolt = <3300000>; 100 regulator-name = "vcc-pl"; 101 }; 102 103 reg_aldo2: aldo2 { 104 regulator-min-microvolt = <3300000>; 105 regulator-max-microvolt = <3300000>; 106 regulator-name = "vcc-ac200"; 107 }; 108 109 reg_aldo3: aldo3 { 110 regulator-always-on; 111 regulator-min-microvolt = <3300000>; 112 regulator-max-microvolt = <3300000>; 113 regulator-name = "vcc25-dram"; 114 }; 115 116 reg_bldo1: bldo1 { 117 regulator-always-on; 118 regulator-min-microvolt = <1800000>; 119 regulator-max-microvolt = <1800000>; 120 regulator-name = "vcc-bias-pll"; 121 }; 122 123 reg_bldo2: bldo2 { 124 regulator-always-on; 125 regulator-min-microvolt = <1800000>; 126 regulator-max-microvolt = <1800000>; 127 regulator-name = "vcc-efuse-pcie-hdmi-io"; 128 }; 129 130 reg_bldo3: bldo3 { 131 regulator-always-on; 132 regulator-min-microvolt = <1800000>; 133 regulator-max-microvolt = <1800000>; 134 regulator-name = "vcc-dcxoio"; 135 }; 136 137 bldo4 { 138 /* unused */ 139 }; 140 141 reg_cldo1: cldo1 { 142 regulator-always-on; 143 regulator-min-microvolt = <3300000>; 144 regulator-max-microvolt = <3300000>; 145 regulator-name = "vcc-3v3"; 146 }; 147 148 reg_cldo2: cldo2 { 149 regulator-min-microvolt = <3300000>; 150 regulator-max-microvolt = <3300000>; 151 regulator-name = "vcc-wifi-1"; 152 }; 153 154 reg_cldo3: cldo3 { 155 regulator-min-microvolt = <3300000>; 156 regulator-max-microvolt = <3300000>; 157 regulator-name = "vcc-wifi-2"; 158 }; 159 160 reg_dcdca: dcdca { 161 regulator-always-on; 162 regulator-min-microvolt = <810000>; 163 regulator-max-microvolt = <1080000>; 164 regulator-name = "vdd-cpu"; 165 }; 166 167 reg_dcdcc: dcdcc { 168 regulator-min-microvolt = <810000>; 169 regulator-max-microvolt = <1080000>; 170 regulator-name = "vdd-gpu"; 171 }; 172 173 reg_dcdcd: dcdcd { 174 regulator-always-on; 175 regulator-min-microvolt = <960000>; 176 regulator-max-microvolt = <960000>; 177 regulator-name = "vdd-sys"; 178 }; 179 180 reg_dcdce: dcdce { 181 regulator-always-on; 182 regulator-min-microvolt = <1200000>; 183 regulator-max-microvolt = <1200000>; 184 regulator-name = "vcc-dram"; 185 }; 186 187 sw { 188 /* unused */ 189 }; 190 }; 191 }; 192}; 193 194&uart0 { 195 pinctrl-names = "default"; 196 pinctrl-0 = <&uart0_ph_pins>; 197 status = "okay"; 198}; 199 200&usb2otg { 201 dr_mode = "otg"; 202 status = "okay"; 203}; 204 205&usb2phy { 206 usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ 207 usb0_vbus-supply = <®_vcc5v>; 208 usb3_vbus-supply = <®_vcc5v>; 209 status = "okay"; 210}; 211