1// SPDX-License-Identifier: (GPL-2.0+ or MIT) 2/* 3 * Copyright (C) 2018 Amarula Solutions 4 * Author: Jagan Teki <jagan@amarulasolutions.com> 5 */ 6 7/dts-v1/; 8 9#include "sun50i-h6.dtsi" 10 11#include <dt-bindings/gpio/gpio.h> 12 13/ { 14 model = "OrangePi One Plus"; 15 compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6"; 16 17 aliases { 18 serial0 = &uart0; 19 }; 20 21 chosen { 22 stdout-path = "serial0:115200n8"; 23 }; 24 25 leds { 26 compatible = "gpio-leds"; 27 28 power { 29 label = "orangepi:red:power"; 30 gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ 31 default-state = "on"; 32 }; 33 34 status { 35 label = "orangepi:green:status"; 36 gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ 37 }; 38 }; 39 40 reg_vcc5v: vcc5v { 41 /* board wide 5V supply directly from the DC jack */ 42 compatible = "regulator-fixed"; 43 regulator-name = "vcc-5v"; 44 regulator-min-microvolt = <5000000>; 45 regulator-max-microvolt = <5000000>; 46 regulator-always-on; 47 }; 48}; 49 50&ehci0 { 51 status = "okay"; 52}; 53 54&ehci3 { 55 status = "okay"; 56}; 57 58&mmc0 { 59 vmmc-supply = <®_cldo1>; 60 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; 61 bus-width = <4>; 62 status = "okay"; 63}; 64 65&ohci0 { 66 status = "okay"; 67}; 68 69&ohci3 { 70 status = "okay"; 71}; 72 73&r_i2c { 74 status = "okay"; 75 76 axp805: pmic@36 { 77 compatible = "x-powers,axp805", "x-powers,axp806"; 78 reg = <0x36>; 79 interrupt-parent = <&r_intc>; 80 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 81 interrupt-controller; 82 #interrupt-cells = <1>; 83 x-powers,self-working-mode; 84 vina-supply = <®_vcc5v>; 85 vinb-supply = <®_vcc5v>; 86 vinc-supply = <®_vcc5v>; 87 vind-supply = <®_vcc5v>; 88 vine-supply = <®_vcc5v>; 89 aldoin-supply = <®_vcc5v>; 90 bldoin-supply = <®_vcc5v>; 91 cldoin-supply = <®_vcc5v>; 92 93 regulators { 94 reg_aldo1: aldo1 { 95 regulator-always-on; 96 regulator-min-microvolt = <3300000>; 97 regulator-max-microvolt = <3300000>; 98 regulator-name = "vcc-pl"; 99 }; 100 101 reg_aldo2: aldo2 { 102 regulator-min-microvolt = <3300000>; 103 regulator-max-microvolt = <3300000>; 104 regulator-name = "vcc-ac200"; 105 }; 106 107 reg_aldo3: aldo3 { 108 regulator-always-on; 109 regulator-min-microvolt = <3300000>; 110 regulator-max-microvolt = <3300000>; 111 regulator-name = "vcc25-dram"; 112 }; 113 114 reg_bldo1: bldo1 { 115 regulator-always-on; 116 regulator-min-microvolt = <1800000>; 117 regulator-max-microvolt = <1800000>; 118 regulator-name = "vcc-bias-pll"; 119 }; 120 121 reg_bldo2: bldo2 { 122 regulator-always-on; 123 regulator-min-microvolt = <1800000>; 124 regulator-max-microvolt = <1800000>; 125 regulator-name = "vcc-efuse-pcie-hdmi-io"; 126 }; 127 128 reg_bldo3: bldo3 { 129 regulator-always-on; 130 regulator-min-microvolt = <1800000>; 131 regulator-max-microvolt = <1800000>; 132 regulator-name = "vcc-dcxoio"; 133 }; 134 135 bldo4 { 136 /* unused */ 137 }; 138 139 reg_cldo1: cldo1 { 140 regulator-always-on; 141 regulator-min-microvolt = <3300000>; 142 regulator-max-microvolt = <3300000>; 143 regulator-name = "vcc-3v3"; 144 }; 145 146 reg_cldo2: cldo2 { 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 regulator-name = "vcc-wifi-1"; 150 }; 151 152 reg_cldo3: cldo3 { 153 regulator-min-microvolt = <3300000>; 154 regulator-max-microvolt = <3300000>; 155 regulator-name = "vcc-wifi-2"; 156 }; 157 158 reg_dcdca: dcdca { 159 regulator-always-on; 160 regulator-min-microvolt = <810000>; 161 regulator-max-microvolt = <1080000>; 162 regulator-name = "vdd-cpu"; 163 }; 164 165 reg_dcdcc: dcdcc { 166 regulator-min-microvolt = <810000>; 167 regulator-max-microvolt = <1080000>; 168 regulator-name = "vdd-gpu"; 169 }; 170 171 reg_dcdcd: dcdcd { 172 regulator-always-on; 173 regulator-min-microvolt = <960000>; 174 regulator-max-microvolt = <960000>; 175 regulator-name = "vdd-sys"; 176 }; 177 178 reg_dcdce: dcdce { 179 regulator-always-on; 180 regulator-min-microvolt = <1200000>; 181 regulator-max-microvolt = <1200000>; 182 regulator-name = "vcc-dram"; 183 }; 184 185 sw { 186 /* unused */ 187 }; 188 }; 189 }; 190}; 191 192&r_ir { 193 status = "okay"; 194}; 195 196&uart0 { 197 pinctrl-names = "default"; 198 pinctrl-0 = <&uart0_ph_pins>; 199 status = "okay"; 200}; 201 202&usb2otg { 203 dr_mode = "otg"; 204 status = "okay"; 205}; 206 207&usb2phy { 208 usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ 209 usb0_vbus-supply = <®_vcc5v>; 210 usb3_vbus-supply = <®_vcc5v>; 211 status = "okay"; 212}; 213