1/*
2 * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This library is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This library is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44
45#include "sun50i-h5.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "OrangePi Zero Plus2";
51	compatible = "xunlong,orangepi-zero-plus2", "allwinner,sun50i-h5";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60
61	connector {
62		compatible = "hdmi-connector";
63		type = "a";
64
65		port {
66			hdmi_con_in: endpoint {
67				remote-endpoint = <&hdmi_out_con>;
68			};
69		};
70	};
71
72	reg_vcc3v3: vcc3v3 {
73		compatible = "regulator-fixed";
74		regulator-name = "vcc3v3";
75		regulator-min-microvolt = <3300000>;
76		regulator-max-microvolt = <3300000>;
77	};
78
79	wifi_pwrseq: wifi_pwrseq {
80		compatible = "mmc-pwrseq-simple";
81		pinctrl-names = "default";
82		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
83		post-power-on-delay-ms = <200>;
84	};
85};
86
87&de {
88	status = "okay";
89};
90
91&hdmi {
92	status = "okay";
93};
94
95&hdmi_out {
96	hdmi_out_con: endpoint {
97		remote-endpoint = <&hdmi_con_in>;
98	};
99};
100
101&mmc0 {
102	vmmc-supply = <&reg_vcc3v3>;
103	bus-width = <4>;
104	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
105	status = "okay";
106};
107
108&mmc1 {
109	vmmc-supply = <&reg_vcc3v3>;
110	vqmmc-supply = <&reg_vcc3v3>;
111	mmc-pwrseq = <&wifi_pwrseq>;
112	bus-width = <4>;
113	non-removable;
114	status = "okay";
115
116	brcmf: wifi@1 {
117		reg = <1>;
118		compatible = "brcm,bcm4329-fmac";
119		interrupt-parent = <&r_pio>;
120		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
121		interrupt-names = "host-wake";
122	};
123};
124
125&mmc2 {
126	pinctrl-names = "default";
127	pinctrl-0 = <&mmc2_8bit_pins>;
128	vmmc-supply = <&reg_vcc3v3>;
129	bus-width = <8>;
130	non-removable;
131	cap-mmc-hw-reset;
132	status = "okay";
133};
134
135&uart0 {
136	pinctrl-names = "default";
137	pinctrl-0 = <&uart0_pins_a>;
138	status = "okay";
139};
140
141&uart1 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
144	status = "okay";
145};
146