1/* 2 * Copyright (C) 2016 ARM Ltd. 3 * based on the Allwinner H3 dtsi: 4 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45#include <dt-bindings/clock/sun50i-a64-ccu.h> 46#include <dt-bindings/clock/sun8i-r-ccu.h> 47#include <dt-bindings/interrupt-controller/arm-gic.h> 48#include <dt-bindings/reset/sun50i-a64-ccu.h> 49 50/ { 51 interrupt-parent = <&gic>; 52 #address-cells = <1>; 53 #size-cells = <1>; 54 55 cpus { 56 #address-cells = <1>; 57 #size-cells = <0>; 58 59 cpu0: cpu@0 { 60 compatible = "arm,cortex-a53", "arm,armv8"; 61 device_type = "cpu"; 62 reg = <0>; 63 enable-method = "psci"; 64 }; 65 66 cpu1: cpu@1 { 67 compatible = "arm,cortex-a53", "arm,armv8"; 68 device_type = "cpu"; 69 reg = <1>; 70 enable-method = "psci"; 71 }; 72 73 cpu2: cpu@2 { 74 compatible = "arm,cortex-a53", "arm,armv8"; 75 device_type = "cpu"; 76 reg = <2>; 77 enable-method = "psci"; 78 }; 79 80 cpu3: cpu@3 { 81 compatible = "arm,cortex-a53", "arm,armv8"; 82 device_type = "cpu"; 83 reg = <3>; 84 enable-method = "psci"; 85 }; 86 }; 87 88 osc24M: osc24M_clk { 89 #clock-cells = <0>; 90 compatible = "fixed-clock"; 91 clock-frequency = <24000000>; 92 clock-output-names = "osc24M"; 93 }; 94 95 osc32k: osc32k_clk { 96 #clock-cells = <0>; 97 compatible = "fixed-clock"; 98 clock-frequency = <32768>; 99 clock-output-names = "osc32k"; 100 }; 101 102 iosc: internal-osc-clk { 103 #clock-cells = <0>; 104 compatible = "fixed-clock"; 105 clock-frequency = <16000000>; 106 clock-accuracy = <300000000>; 107 clock-output-names = "iosc"; 108 }; 109 110 psci { 111 compatible = "arm,psci-0.2"; 112 method = "smc"; 113 }; 114 115 timer { 116 compatible = "arm,armv8-timer"; 117 interrupts = <GIC_PPI 13 118 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, 119 <GIC_PPI 14 120 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, 121 <GIC_PPI 11 122 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, 123 <GIC_PPI 10 124 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 125 }; 126 127 soc { 128 compatible = "simple-bus"; 129 #address-cells = <1>; 130 #size-cells = <1>; 131 ranges; 132 133 syscon: syscon@1c00000 { 134 compatible = "allwinner,sun50i-a64-system-controller", 135 "syscon"; 136 reg = <0x01c00000 0x1000>; 137 }; 138 139 mmc0: mmc@1c0f000 { 140 compatible = "allwinner,sun50i-a64-mmc"; 141 reg = <0x01c0f000 0x1000>; 142 clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; 143 clock-names = "ahb", "mmc"; 144 resets = <&ccu RST_BUS_MMC0>; 145 reset-names = "ahb"; 146 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; 147 max-frequency = <150000000>; 148 status = "disabled"; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 }; 152 153 mmc1: mmc@1c10000 { 154 compatible = "allwinner,sun50i-a64-mmc"; 155 reg = <0x01c10000 0x1000>; 156 clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; 157 clock-names = "ahb", "mmc"; 158 resets = <&ccu RST_BUS_MMC1>; 159 reset-names = "ahb"; 160 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 161 max-frequency = <150000000>; 162 status = "disabled"; 163 #address-cells = <1>; 164 #size-cells = <0>; 165 }; 166 167 mmc2: mmc@1c11000 { 168 compatible = "allwinner,sun50i-a64-emmc"; 169 reg = <0x01c11000 0x1000>; 170 clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; 171 clock-names = "ahb", "mmc"; 172 resets = <&ccu RST_BUS_MMC2>; 173 reset-names = "ahb"; 174 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 175 max-frequency = <200000000>; 176 status = "disabled"; 177 #address-cells = <1>; 178 #size-cells = <0>; 179 }; 180 181 usb_otg: usb@01c19000 { 182 compatible = "allwinner,sun8i-a33-musb"; 183 reg = <0x01c19000 0x0400>; 184 clocks = <&ccu CLK_BUS_OTG>; 185 resets = <&ccu RST_BUS_OTG>; 186 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 187 interrupt-names = "mc"; 188 phys = <&usbphy 0>; 189 phy-names = "usb"; 190 extcon = <&usbphy 0>; 191 status = "disabled"; 192 }; 193 194 usbphy: phy@01c19400 { 195 compatible = "allwinner,sun50i-a64-usb-phy"; 196 reg = <0x01c19400 0x14>, 197 <0x01c1a800 0x4>, 198 <0x01c1b800 0x4>; 199 reg-names = "phy_ctrl", 200 "pmu0", 201 "pmu1"; 202 clocks = <&ccu CLK_USB_PHY0>, 203 <&ccu CLK_USB_PHY1>; 204 clock-names = "usb0_phy", 205 "usb1_phy"; 206 resets = <&ccu RST_USB_PHY0>, 207 <&ccu RST_USB_PHY1>; 208 reset-names = "usb0_reset", 209 "usb1_reset"; 210 status = "disabled"; 211 #phy-cells = <1>; 212 }; 213 214 ehci0: usb@01c1a000 { 215 compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; 216 reg = <0x01c1a000 0x100>; 217 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; 218 clocks = <&ccu CLK_BUS_OHCI0>, 219 <&ccu CLK_BUS_EHCI0>, 220 <&ccu CLK_USB_OHCI0>; 221 resets = <&ccu RST_BUS_OHCI0>, 222 <&ccu RST_BUS_EHCI0>; 223 status = "disabled"; 224 }; 225 226 ohci0: usb@01c1a400 { 227 compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; 228 reg = <0x01c1a400 0x100>; 229 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; 230 clocks = <&ccu CLK_BUS_OHCI0>, 231 <&ccu CLK_USB_OHCI0>; 232 resets = <&ccu RST_BUS_OHCI0>; 233 status = "disabled"; 234 }; 235 236 ehci1: usb@01c1b000 { 237 compatible = "allwinner,sun50i-a64-ehci", "generic-ehci"; 238 reg = <0x01c1b000 0x100>; 239 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; 240 clocks = <&ccu CLK_BUS_OHCI1>, 241 <&ccu CLK_BUS_EHCI1>, 242 <&ccu CLK_USB_OHCI1>; 243 resets = <&ccu RST_BUS_OHCI1>, 244 <&ccu RST_BUS_EHCI1>; 245 phys = <&usbphy 1>; 246 phy-names = "usb"; 247 status = "disabled"; 248 }; 249 250 ohci1: usb@01c1b400 { 251 compatible = "allwinner,sun50i-a64-ohci", "generic-ohci"; 252 reg = <0x01c1b400 0x100>; 253 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; 254 clocks = <&ccu CLK_BUS_OHCI1>, 255 <&ccu CLK_USB_OHCI1>; 256 resets = <&ccu RST_BUS_OHCI1>; 257 phys = <&usbphy 1>; 258 phy-names = "usb"; 259 status = "disabled"; 260 }; 261 262 ccu: clock@01c20000 { 263 compatible = "allwinner,sun50i-a64-ccu"; 264 reg = <0x01c20000 0x400>; 265 clocks = <&osc24M>, <&osc32k>; 266 clock-names = "hosc", "losc"; 267 #clock-cells = <1>; 268 #reset-cells = <1>; 269 }; 270 271 pio: pinctrl@1c20800 { 272 compatible = "allwinner,sun50i-a64-pinctrl"; 273 reg = <0x01c20800 0x400>; 274 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, 275 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, 276 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; 277 clocks = <&ccu 58>; 278 gpio-controller; 279 #gpio-cells = <3>; 280 interrupt-controller; 281 #interrupt-cells = <3>; 282 283 i2c1_pins: i2c1_pins { 284 pins = "PH2", "PH3"; 285 function = "i2c1"; 286 }; 287 288 mmc0_pins: mmc0-pins { 289 pins = "PF0", "PF1", "PF2", "PF3", 290 "PF4", "PF5"; 291 function = "mmc0"; 292 drive-strength = <30>; 293 bias-pull-up; 294 }; 295 296 mmc1_pins: mmc1-pins { 297 pins = "PG0", "PG1", "PG2", "PG3", 298 "PG4", "PG5"; 299 function = "mmc1"; 300 drive-strength = <30>; 301 bias-pull-up; 302 }; 303 304 mmc2_pins: mmc2-pins { 305 pins = "PC1", "PC5", "PC6", "PC8", "PC9", 306 "PC10","PC11", "PC12", "PC13", 307 "PC14", "PC15", "PC16"; 308 function = "mmc2"; 309 drive-strength = <30>; 310 bias-pull-up; 311 }; 312 313 rmii_pins: rmii_pins { 314 pins = "PD10", "PD11", "PD13", "PD14", "PD17", 315 "PD18", "PD19", "PD20", "PD22", "PD23"; 316 function = "emac"; 317 drive-strength = <40>; 318 }; 319 320 rgmii_pins: rgmii_pins { 321 pins = "PD8", "PD9", "PD10", "PD11", "PD12", 322 "PD13", "PD15", "PD16", "PD17", "PD18", 323 "PD19", "PD20", "PD21", "PD22", "PD23"; 324 function = "emac"; 325 drive-strength = <40>; 326 }; 327 328 uart0_pins_a: uart0@0 { 329 pins = "PB8", "PB9"; 330 function = "uart0"; 331 }; 332 333 uart1_pins: uart1_pins { 334 pins = "PG6", "PG7"; 335 function = "uart1"; 336 }; 337 338 uart1_rts_cts_pins: uart1_rts_cts_pins { 339 pins = "PG8", "PG9"; 340 function = "uart1"; 341 }; 342 343 uart2_pins: uart2-pins { 344 pins = "PB0", "PB1"; 345 function = "uart2"; 346 }; 347 348 uart3_pins: uart3-pins { 349 pins = "PD0", "PD1"; 350 function = "uart3"; 351 }; 352 353 uart4_pins: uart4-pins { 354 pins = "PD2", "PD3"; 355 function = "uart4"; 356 }; 357 358 uart4_rts_cts_pins: uart4-rts-cts-pins { 359 pins = "PD4", "PD5"; 360 function = "uart4"; 361 }; 362 }; 363 364 uart0: serial@1c28000 { 365 compatible = "snps,dw-apb-uart"; 366 reg = <0x01c28000 0x400>; 367 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 368 reg-shift = <2>; 369 reg-io-width = <4>; 370 clocks = <&ccu CLK_BUS_UART0>; 371 resets = <&ccu RST_BUS_UART0>; 372 status = "disabled"; 373 }; 374 375 uart1: serial@1c28400 { 376 compatible = "snps,dw-apb-uart"; 377 reg = <0x01c28400 0x400>; 378 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 379 reg-shift = <2>; 380 reg-io-width = <4>; 381 clocks = <&ccu CLK_BUS_UART1>; 382 resets = <&ccu RST_BUS_UART1>; 383 status = "disabled"; 384 }; 385 386 uart2: serial@1c28800 { 387 compatible = "snps,dw-apb-uart"; 388 reg = <0x01c28800 0x400>; 389 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 390 reg-shift = <2>; 391 reg-io-width = <4>; 392 clocks = <&ccu CLK_BUS_UART2>; 393 resets = <&ccu RST_BUS_UART2>; 394 status = "disabled"; 395 }; 396 397 uart3: serial@1c28c00 { 398 compatible = "snps,dw-apb-uart"; 399 reg = <0x01c28c00 0x400>; 400 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 401 reg-shift = <2>; 402 reg-io-width = <4>; 403 clocks = <&ccu CLK_BUS_UART3>; 404 resets = <&ccu RST_BUS_UART3>; 405 status = "disabled"; 406 }; 407 408 uart4: serial@1c29000 { 409 compatible = "snps,dw-apb-uart"; 410 reg = <0x01c29000 0x400>; 411 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 412 reg-shift = <2>; 413 reg-io-width = <4>; 414 clocks = <&ccu CLK_BUS_UART4>; 415 resets = <&ccu RST_BUS_UART4>; 416 status = "disabled"; 417 }; 418 419 i2c0: i2c@1c2ac00 { 420 compatible = "allwinner,sun6i-a31-i2c"; 421 reg = <0x01c2ac00 0x400>; 422 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 423 clocks = <&ccu CLK_BUS_I2C0>; 424 resets = <&ccu RST_BUS_I2C0>; 425 status = "disabled"; 426 #address-cells = <1>; 427 #size-cells = <0>; 428 }; 429 430 i2c1: i2c@1c2b000 { 431 compatible = "allwinner,sun6i-a31-i2c"; 432 reg = <0x01c2b000 0x400>; 433 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 434 clocks = <&ccu CLK_BUS_I2C1>; 435 resets = <&ccu RST_BUS_I2C1>; 436 status = "disabled"; 437 #address-cells = <1>; 438 #size-cells = <0>; 439 }; 440 441 i2c2: i2c@1c2b400 { 442 compatible = "allwinner,sun6i-a31-i2c"; 443 reg = <0x01c2b400 0x400>; 444 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 445 clocks = <&ccu CLK_BUS_I2C2>; 446 resets = <&ccu RST_BUS_I2C2>; 447 status = "disabled"; 448 #address-cells = <1>; 449 #size-cells = <0>; 450 }; 451 452 gic: interrupt-controller@1c81000 { 453 compatible = "arm,gic-400"; 454 reg = <0x01c81000 0x1000>, 455 <0x01c82000 0x2000>, 456 <0x01c84000 0x2000>, 457 <0x01c86000 0x2000>; 458 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 459 interrupt-controller; 460 #interrupt-cells = <3>; 461 }; 462 463 rtc: rtc@1f00000 { 464 compatible = "allwinner,sun6i-a31-rtc"; 465 reg = <0x01f00000 0x54>; 466 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, 467 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 468 }; 469 470 r_intc: interrupt-controller@1f00c00 { 471 compatible = "allwinner,sun50i-a64-r-intc", 472 "allwinner,sun6i-a31-r-intc"; 473 interrupt-controller; 474 #interrupt-cells = <2>; 475 reg = <0x01f00c00 0x400>; 476 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 477 }; 478 479 r_ccu: clock@1f01400 { 480 compatible = "allwinner,sun50i-a64-r-ccu"; 481 reg = <0x01f01400 0x100>; 482 clocks = <&osc24M>, <&osc32k>, <&iosc>, 483 <&ccu 11>; 484 clock-names = "hosc", "losc", "iosc", "pll-periph"; 485 #clock-cells = <1>; 486 #reset-cells = <1>; 487 }; 488 489 r_pio: pinctrl@01f02c00 { 490 compatible = "allwinner,sun50i-a64-r-pinctrl"; 491 reg = <0x01f02c00 0x400>; 492 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 493 clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>; 494 clock-names = "apb", "hosc", "losc"; 495 gpio-controller; 496 #gpio-cells = <3>; 497 interrupt-controller; 498 #interrupt-cells = <3>; 499 500 r_rsb_pins: rsb@0 { 501 pins = "PL0", "PL1"; 502 function = "s_rsb"; 503 }; 504 }; 505 506 r_rsb: rsb@1f03400 { 507 compatible = "allwinner,sun8i-a23-rsb"; 508 reg = <0x01f03400 0x400>; 509 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; 510 clocks = <&r_ccu 6>; 511 clock-frequency = <3000000>; 512 resets = <&r_ccu 2>; 513 pinctrl-names = "default"; 514 pinctrl-0 = <&r_rsb_pins>; 515 status = "disabled"; 516 #address-cells = <1>; 517 #size-cells = <0>; 518 }; 519 }; 520}; 521