xref: /openbmc/linux/arch/arm64/Kconfig.platforms (revision 78c5335b)
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Platform selection"
3
4config ARCH_ACTIONS
5	bool "Actions Semi Platforms"
6	select OWL_TIMER
7	select PINCTRL
8	help
9	  This enables support for the Actions Semiconductor S900 SoC family.
10
11config ARCH_SUNXI
12	bool "Allwinner sunxi 64-bit SoC Family"
13	select ARCH_HAS_RESET_CONTROLLER
14	select GENERIC_IRQ_CHIP
15	select IRQ_DOMAIN_HIERARCHY
16	select IRQ_FASTEOI_HIERARCHY_HANDLERS
17	select PINCTRL
18	select RESET_CONTROLLER
19	select SUN4I_TIMER
20	help
21	  This enables support for Allwinner sunxi based SoCs like the A64.
22
23config ARCH_ALPINE
24	bool "Annapurna Labs Alpine platform"
25	select ALPINE_MSI if PCI
26	help
27	  This enables support for the Annapurna Labs Alpine
28	  Soc family.
29
30config ARCH_APPLE
31	bool "Apple Silicon SoC family"
32	select APPLE_AIC
33	help
34	  This enables support for Apple's in-house ARM SoC family, starting
35	  with the Apple M1.
36
37config ARCH_BCM2835
38	bool "Broadcom BCM2835 family"
39	select TIMER_OF
40	select GPIOLIB
41	select MFD_CORE
42	select PINCTRL
43	select PINCTRL_BCM2835
44	select ARM_AMBA
45	select ARM_GIC
46	select ARM_TIMER_SP804
47	help
48	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
49	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
50
51config ARCH_BCM4908
52	bool "Broadcom BCM4908 family"
53	select GPIOLIB
54	help
55	  This enables support for the Broadcom BCM4906, BCM4908 and
56	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
57	  found in home routers.
58
59config ARCH_BCM_IPROC
60	bool "Broadcom iProc SoC Family"
61	select COMMON_CLK_IPROC
62	select GPIOLIB
63	select PINCTRL
64	help
65	  This enables support for Broadcom iProc based SoCs
66
67config ARCH_BERLIN
68	bool "Marvell Berlin SoC Family"
69	select DW_APB_ICTL
70	select DW_APB_TIMER_OF
71	select GPIOLIB
72	select PINCTRL
73	help
74	  This enables support for Marvell Berlin SoC Family
75
76config ARCH_BITMAIN
77	bool "Bitmain SoC Platforms"
78	help
79	  This enables support for the Bitmain SoC Family.
80
81config ARCH_BRCMSTB
82	bool "Broadcom Set-Top-Box SoCs"
83	select ARCH_HAS_RESET_CONTROLLER
84	select GENERIC_IRQ_CHIP
85	select PINCTRL
86	help
87	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
88
89config ARCH_EXYNOS
90	bool "ARMv8 based Samsung Exynos SoC family"
91	select COMMON_CLK_SAMSUNG
92	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
93	select EXYNOS_PMU
94	select PINCTRL
95	select PINCTRL_EXYNOS
96	select PM_GENERIC_DOMAINS if PM
97	select SOC_SAMSUNG
98	help
99	  This enables support for ARMv8 based Samsung Exynos SoC family.
100
101config ARCH_SPARX5
102	bool "ARMv8 based Microchip Sparx5 SoC family"
103	select PINCTRL
104	select DW_APB_TIMER_OF
105	help
106	  This enables support for the Microchip Sparx5 ARMv8-based
107	  SoC family of TSN-capable gigabit switches.
108
109	  The SparX-5 Ethernet switch family provides a rich set of
110	  switching features such as advanced TCAM-based VLAN and QoS
111	  processing enabling delivery of differentiated services, and
112	  security through TCAM-based frame processing using versatile
113	  content aware processor (VCAP).
114
115config ARCH_K3
116	bool "Texas Instruments Inc. K3 multicore SoC architecture"
117	select PM_GENERIC_DOMAINS if PM
118	select MAILBOX
119	select SOC_TI
120	select TI_MESSAGE_MANAGER
121	select TI_SCI_PROTOCOL
122	select TI_SCI_INTR_IRQCHIP
123	select TI_SCI_INTA_IRQCHIP
124	select TI_K3_SOCINFO
125	help
126	  This enables support for Texas Instruments' K3 multicore SoC
127	  architecture.
128
129config ARCH_LAYERSCAPE
130	bool "ARMv8 based Freescale Layerscape SoC family"
131	select EDAC_SUPPORT
132	help
133	  This enables support for the Freescale Layerscape SoC family.
134
135config ARCH_LG1K
136	bool "LG Electronics LG1K SoC Family"
137	help
138	  This enables support for LG Electronics LG1K SoC Family
139
140config ARCH_HISI
141	bool "Hisilicon SoC Family"
142	select ARM_TIMER_SP804
143	select HISILICON_IRQ_MBIGEN if PCI
144	select PINCTRL
145	help
146	  This enables support for Hisilicon ARMv8 SoC family
147
148config ARCH_KEEMBAY
149	bool "Keem Bay SoC"
150	help
151	  This enables support for Intel Movidius SoC code-named Keem Bay.
152
153config ARCH_MEDIATEK
154	bool "MediaTek SoC Family"
155	select ARM_GIC
156	select PINCTRL
157	select MTK_TIMER
158	help
159	  This enables support for MediaTek MT27xx, MT65xx, MT76xx
160	  & MT81xx ARMv8 SoCs
161
162config ARCH_MESON
163	bool "Amlogic Platforms"
164	help
165	  This enables support for the arm64 based Amlogic SoCs
166	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
167
168config ARCH_MVEBU
169	bool "Marvell EBU SoC Family"
170	select ARMADA_AP806_SYSCON
171	select ARMADA_CP110_SYSCON
172	select ARMADA_37XX_CLK
173	select GPIOLIB
174	select GPIOLIB_IRQCHIP
175	select MVEBU_GICP
176	select MVEBU_ICU
177	select MVEBU_ODMI
178	select MVEBU_PIC
179	select MVEBU_SEI
180	select OF_GPIO
181	select PINCTRL
182	select PINCTRL_ARMADA_37XX
183	select PINCTRL_ARMADA_AP806
184	select PINCTRL_ARMADA_CP110
185	help
186	  This enables support for Marvell EBU familly, including:
187	   - Armada 3700 SoC Family
188	   - Armada 7K SoC Family
189	   - Armada 8K SoC Family
190
191config ARCH_MXC
192	bool "ARMv8 based NXP i.MX SoC family"
193	select ARM64_ERRATUM_843419
194	select ARM64_ERRATUM_845719 if COMPAT
195	select IMX_GPCV2
196	select IMX_GPCV2_PM_DOMAINS
197	select PM
198	select PM_GENERIC_DOMAINS
199	select SOC_BUS
200	select TIMER_IMX_SYS_CTR
201	help
202	  This enables support for the ARMv8 based SoCs in the
203	  NXP i.MX family.
204
205config ARCH_QCOM
206	bool "Qualcomm Platforms"
207	select GPIOLIB
208	select PINCTRL
209	help
210	  This enables support for the ARMv8 based Qualcomm chipsets.
211
212config ARCH_REALTEK
213	bool "Realtek Platforms"
214	select RESET_CONTROLLER
215	help
216	  This enables support for the ARMv8 based Realtek chipsets,
217	  like the RTD1295.
218
219config ARCH_RENESAS
220	bool "Renesas SoC Platforms"
221	select GPIOLIB
222	select PINCTRL
223	select SOC_BUS
224	help
225	  This enables support for the ARMv8 based Renesas SoCs.
226
227config ARCH_ROCKCHIP
228	bool "Rockchip Platforms"
229	select ARCH_HAS_RESET_CONTROLLER
230	select PINCTRL
231	select PM
232	select ROCKCHIP_TIMER
233	help
234	  This enables support for the ARMv8 based Rockchip chipsets,
235	  like the RK3368.
236
237config ARCH_S32
238	bool "NXP S32 SoC Family"
239	help
240	  This enables support for the NXP S32 family of processors.
241
242config ARCH_SEATTLE
243	bool "AMD Seattle SoC Family"
244	help
245	  This enables support for AMD Seattle SOC Family
246
247config ARCH_INTEL_SOCFPGA
248	bool "Intel's SoCFPGA ARMv8 Families"
249	help
250	  This enables support for Intel's SoCFPGA ARMv8 families:
251	  Stratix 10 (ex. Altera), Agilex and eASIC N5X.
252
253config ARCH_SYNQUACER
254	bool "Socionext SynQuacer SoC Family"
255
256config ARCH_TEGRA
257	bool "NVIDIA Tegra SoC Family"
258	select ARCH_HAS_RESET_CONTROLLER
259	select ARM_GIC_PM
260	select CLKSRC_MMIO
261	select TIMER_OF
262	select GPIOLIB
263	select PINCTRL
264	select PM
265	select PM_GENERIC_DOMAINS
266	select RESET_CONTROLLER
267	help
268	  This enables support for the NVIDIA Tegra SoC family.
269
270config ARCH_SPRD
271	bool "Spreadtrum SoC platform"
272	help
273	  Support for Spreadtrum ARM based SoCs
274
275config ARCH_THUNDER
276	bool "Cavium Inc. Thunder SoC Family"
277	help
278	  This enables support for Cavium's Thunder Family of SoCs.
279
280config ARCH_THUNDER2
281	bool "Cavium ThunderX2 Server Processors"
282	select GPIOLIB
283	help
284	  This enables support for Cavium's ThunderX2 CN99XX family of
285	  server processors.
286
287config ARCH_UNIPHIER
288	bool "Socionext UniPhier SoC Family"
289	select ARCH_HAS_RESET_CONTROLLER
290	select PINCTRL
291	select RESET_CONTROLLER
292	help
293	  This enables support for Socionext UniPhier SoC family.
294
295config ARCH_VEXPRESS
296	bool "ARMv8 software model (Versatile Express)"
297	select GPIOLIB
298	select PM
299	select PM_GENERIC_DOMAINS
300	help
301	  This enables support for the ARMv8 software model (Versatile
302	  Express).
303
304config ARCH_VISCONTI
305	bool "Toshiba Visconti SoC Family"
306	select PINCTRL
307	select PINCTRL_VISCONTI
308	help
309	  This enables support for Toshiba Visconti SoCs Family.
310
311config ARCH_VULCAN
312	def_bool n
313
314config ARCH_XGENE
315	bool "AppliedMicro X-Gene SOC Family"
316	help
317	  This enables support for AppliedMicro X-Gene SOC Family
318
319config ARCH_ZYNQMP
320	bool "Xilinx ZynqMP Family"
321	help
322	  This enables support for Xilinx ZynqMP Family
323
324endmenu
325