xref: /openbmc/linux/arch/arm64/Kconfig.platforms (revision 27ab1c1c)
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Platform selection"
3
4config ARCH_ACTIONS
5	bool "Actions Semi Platforms"
6	select OWL_TIMER
7	select PINCTRL
8	help
9	  This enables support for the Actions Semiconductor S900 SoC family.
10
11config ARCH_AGILEX
12	bool "Intel's Agilex SoCFPGA Family"
13	help
14	  This enables support for Intel's Agilex SoCFPGA Family.
15
16config ARCH_SUNXI
17	bool "Allwinner sunxi 64-bit SoC Family"
18	select ARCH_HAS_RESET_CONTROLLER
19	select GENERIC_IRQ_CHIP
20	select PINCTRL
21	select RESET_CONTROLLER
22	help
23	  This enables support for Allwinner sunxi based SoCs like the A64.
24
25config ARCH_ALPINE
26	bool "Annapurna Labs Alpine platform"
27	select ALPINE_MSI if PCI
28	help
29	  This enables support for the Annapurna Labs Alpine
30	  Soc family.
31
32config ARCH_BCM2835
33	bool "Broadcom BCM2835 family"
34	select TIMER_OF
35	select GPIOLIB
36	select MFD_CORE
37	select PINCTRL
38	select PINCTRL_BCM2835
39	select ARM_AMBA
40	select ARM_GIC
41	select ARM_TIMER_SP804
42	help
43	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
44	  These SoCs are used in the Raspberry Pi 3 and 4 devices.
45
46config ARCH_BCM4908
47	bool "Broadcom BCM4908 family"
48	select GPIOLIB
49	help
50	  This enables support for the Broadcom BCM4906, BCM4908 and
51	  BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be
52	  found in home routers.
53
54config ARCH_BCM_IPROC
55	bool "Broadcom iProc SoC Family"
56	select COMMON_CLK_IPROC
57	select GPIOLIB
58	select PINCTRL
59	help
60	  This enables support for Broadcom iProc based SoCs
61
62config ARCH_BERLIN
63	bool "Marvell Berlin SoC Family"
64	select DW_APB_ICTL
65	select DW_APB_TIMER_OF
66	select GPIOLIB
67	select PINCTRL
68	help
69	  This enables support for Marvell Berlin SoC Family
70
71config ARCH_BITMAIN
72	bool "Bitmain SoC Platforms"
73	help
74	  This enables support for the Bitmain SoC Family.
75
76config ARCH_BRCMSTB
77	bool "Broadcom Set-Top-Box SoCs"
78	select ARCH_HAS_RESET_CONTROLLER
79	select BCM7038_L1_IRQ
80	select BRCMSTB_L2_IRQ
81	select GENERIC_IRQ_CHIP
82	select PINCTRL
83	help
84	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
85
86config ARCH_EXYNOS
87	bool "ARMv8 based Samsung Exynos SoC family"
88	select COMMON_CLK_SAMSUNG
89	select EXYNOS_CHIPID
90	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
91	select EXYNOS_PMU
92	select HAVE_S3C_RTC if RTC_CLASS
93	select PINCTRL
94	select PINCTRL_EXYNOS
95	select PM_GENERIC_DOMAINS if PM
96	select SOC_SAMSUNG
97	help
98	  This enables support for ARMv8 based Samsung Exynos SoC family.
99
100config ARCH_SPARX5
101	bool "ARMv8 based Microchip Sparx5 SoC family"
102	select PINCTRL
103	select DW_APB_TIMER_OF
104	help
105	  This enables support for the Microchip Sparx5 ARMv8-based
106	  SoC family of TSN-capable gigabit switches.
107
108	  The SparX-5 Ethernet switch family provides a rich set of
109	  switching features such as advanced TCAM-based VLAN and QoS
110	  processing enabling delivery of differentiated services, and
111	  security through TCAM-based frame processing using versatile
112	  content aware processor (VCAP).
113
114config ARCH_K3
115	bool "Texas Instruments Inc. K3 multicore SoC architecture"
116	select PM_GENERIC_DOMAINS if PM
117	select MAILBOX
118	select SOC_TI
119	select TI_MESSAGE_MANAGER
120	select TI_SCI_PROTOCOL
121	select TI_SCI_INTR_IRQCHIP
122	select TI_SCI_INTA_IRQCHIP
123	select TI_K3_SOCINFO
124	help
125	  This enables support for Texas Instruments' K3 multicore SoC
126	  architecture.
127
128config ARCH_LAYERSCAPE
129	bool "ARMv8 based Freescale Layerscape SoC family"
130	select EDAC_SUPPORT
131	help
132	  This enables support for the Freescale Layerscape SoC family.
133
134config ARCH_LG1K
135	bool "LG Electronics LG1K SoC Family"
136	help
137	  This enables support for LG Electronics LG1K SoC Family
138
139config ARCH_HISI
140	bool "Hisilicon SoC Family"
141	select ARM_TIMER_SP804
142	select HISILICON_IRQ_MBIGEN if PCI
143	select PINCTRL
144	help
145	  This enables support for Hisilicon ARMv8 SoC family
146
147config ARCH_KEEMBAY
148	bool "Keem Bay SoC"
149	help
150	  This enables support for Intel Movidius SoC code-named Keem Bay.
151
152config ARCH_MEDIATEK
153	bool "MediaTek SoC Family"
154	select ARM_GIC
155	select PINCTRL
156	select MTK_TIMER
157	help
158	  This enables support for MediaTek MT27xx, MT65xx, MT76xx
159	  & MT81xx ARMv8 SoCs
160
161config ARCH_MESON
162	bool "Amlogic Platforms"
163	select MESON_IRQ_GPIO
164	help
165	  This enables support for the arm64 based Amlogic SoCs
166	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
167
168config ARCH_MVEBU
169	bool "Marvell EBU SoC Family"
170	select ARMADA_AP806_SYSCON
171	select ARMADA_CP110_SYSCON
172	select ARMADA_37XX_CLK
173	select GPIOLIB
174	select GPIOLIB_IRQCHIP
175	select MVEBU_GICP
176	select MVEBU_ICU
177	select MVEBU_ODMI
178	select MVEBU_PIC
179	select MVEBU_SEI
180	select OF_GPIO
181	select PINCTRL
182	select PINCTRL_ARMADA_37XX
183	select PINCTRL_ARMADA_AP806
184	select PINCTRL_ARMADA_CP110
185	help
186	  This enables support for Marvell EBU familly, including:
187	   - Armada 3700 SoC Family
188	   - Armada 7K SoC Family
189	   - Armada 8K SoC Family
190
191config ARCH_MXC
192	bool "ARMv8 based NXP i.MX SoC family"
193	select ARM64_ERRATUM_843419
194	select ARM64_ERRATUM_845719 if COMPAT
195	select IMX_GPCV2
196	select IMX_GPCV2_PM_DOMAINS
197	select PM
198	select PM_GENERIC_DOMAINS
199	select SOC_BUS
200	select TIMER_IMX_SYS_CTR
201	help
202	  This enables support for the ARMv8 based SoCs in the
203	  NXP i.MX family.
204
205config ARCH_QCOM
206	bool "Qualcomm Platforms"
207	select GPIOLIB
208	select PINCTRL
209	help
210	  This enables support for the ARMv8 based Qualcomm chipsets.
211
212config ARCH_REALTEK
213	bool "Realtek Platforms"
214	select RESET_CONTROLLER
215	help
216	  This enables support for the ARMv8 based Realtek chipsets,
217	  like the RTD1295.
218
219config ARCH_RENESAS
220	bool "Renesas SoC Platforms"
221	select GPIOLIB
222	select PINCTRL
223	select SOC_BUS
224	help
225	  This enables support for the ARMv8 based Renesas SoCs.
226
227config ARCH_ROCKCHIP
228	bool "Rockchip Platforms"
229	select ARCH_HAS_RESET_CONTROLLER
230	select GPIOLIB
231	select PINCTRL
232	select PINCTRL_ROCKCHIP
233	select PM
234	select ROCKCHIP_TIMER
235	help
236	  This enables support for the ARMv8 based Rockchip chipsets,
237	  like the RK3368.
238
239config ARCH_S32
240	bool "NXP S32 SoC Family"
241	help
242	  This enables support for the NXP S32 family of processors.
243
244config ARCH_SEATTLE
245	bool "AMD Seattle SoC Family"
246	help
247	  This enables support for AMD Seattle SOC Family
248
249config ARCH_STRATIX10
250	bool "Altera's Stratix 10 SoCFPGA Family"
251	help
252	  This enables support for Altera's Stratix 10 SoCFPGA Family.
253
254config ARCH_SYNQUACER
255	bool "Socionext SynQuacer SoC Family"
256
257config ARCH_TEGRA
258	bool "NVIDIA Tegra SoC Family"
259	select ARCH_HAS_RESET_CONTROLLER
260	select ARM_GIC_PM
261	select CLKSRC_MMIO
262	select TIMER_OF
263	select GPIOLIB
264	select PINCTRL
265	select PM
266	select PM_GENERIC_DOMAINS
267	select RESET_CONTROLLER
268	help
269	  This enables support for the NVIDIA Tegra SoC family.
270
271config ARCH_SPRD
272	bool "Spreadtrum SoC platform"
273	help
274	  Support for Spreadtrum ARM based SoCs
275
276config ARCH_THUNDER
277	bool "Cavium Inc. Thunder SoC Family"
278	help
279	  This enables support for Cavium's Thunder Family of SoCs.
280
281config ARCH_THUNDER2
282	bool "Cavium ThunderX2 Server Processors"
283	select GPIOLIB
284	help
285	  This enables support for Cavium's ThunderX2 CN99XX family of
286	  server processors.
287
288config ARCH_UNIPHIER
289	bool "Socionext UniPhier SoC Family"
290	select ARCH_HAS_RESET_CONTROLLER
291	select PINCTRL
292	select RESET_CONTROLLER
293	help
294	  This enables support for Socionext UniPhier SoC family.
295
296config ARCH_VEXPRESS
297	bool "ARMv8 software model (Versatile Express)"
298	select GPIOLIB
299	select PM
300	select PM_GENERIC_DOMAINS
301	help
302	  This enables support for the ARMv8 software model (Versatile
303	  Express).
304
305config ARCH_VISCONTI
306	bool "Toshiba Visconti SoC Family"
307	select PINCTRL
308	select PINCTRL_VISCONTI
309	help
310	  This enables support for Toshiba Visconti SoCs Family.
311
312config ARCH_VULCAN
313	def_bool n
314
315config ARCH_XGENE
316	bool "AppliedMicro X-Gene SOC Family"
317	help
318	  This enables support for AppliedMicro X-Gene SOC Family
319
320config ARCH_ZX
321	bool "ZTE ZX SoC Family"
322	select PINCTRL
323	help
324	  This enables support for ZTE ZX SoC Family
325
326config ARCH_ZYNQMP
327	bool "Xilinx ZynqMP Family"
328	help
329	  This enables support for Xilinx ZynqMP Family
330
331endmenu
332