xref: /openbmc/linux/arch/arm/probes/kprobes/opt-arm.c (revision b4e18b29)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Kernel Probes Jump Optimization (Optprobes)
4  *
5  * Copyright (C) IBM Corporation, 2002, 2004
6  * Copyright (C) Hitachi Ltd., 2012
7  * Copyright (C) Huawei Inc., 2014
8  */
9 
10 #include <linux/kprobes.h>
11 #include <linux/jump_label.h>
12 #include <asm/kprobes.h>
13 #include <asm/cacheflush.h>
14 /* for arm_gen_branch */
15 #include <asm/insn.h>
16 /* for patch_text */
17 #include <asm/patch.h>
18 
19 #include "core.h"
20 
21 /*
22  * See register_usage_flags. If the probed instruction doesn't use PC,
23  * we can copy it into template and have it executed directly without
24  * simulation or emulation.
25  */
26 #define ARM_REG_PC	15
27 #define can_kprobe_direct_exec(m)	(!test_bit(ARM_REG_PC, &(m)))
28 
29 /*
30  * NOTE: the first sub and add instruction will be modified according
31  * to the stack cost of the instruction.
32  */
33 asm (
34 			".global optprobe_template_entry\n"
35 			"optprobe_template_entry:\n"
36 			".global optprobe_template_sub_sp\n"
37 			"optprobe_template_sub_sp:"
38 			"	sub	sp, sp, #0xff\n"
39 			"	stmia	sp, {r0 - r14} \n"
40 			".global optprobe_template_add_sp\n"
41 			"optprobe_template_add_sp:"
42 			"	add	r3, sp, #0xff\n"
43 			"	str	r3, [sp, #52]\n"
44 			"	mrs	r4, cpsr\n"
45 			"	str	r4, [sp, #64]\n"
46 			"	mov	r1, sp\n"
47 			"	ldr	r0, 1f\n"
48 			"	ldr	r2, 2f\n"
49 			/*
50 			 * AEABI requires an 8-bytes alignment stack. If
51 			 * SP % 8 != 0 (SP % 4 == 0 should be ensured),
52 			 * alloc more bytes here.
53 			 */
54 			"	and	r4, sp, #4\n"
55 			"	sub	sp, sp, r4\n"
56 #if __LINUX_ARM_ARCH__ >= 5
57 			"	blx	r2\n"
58 #else
59 			"	mov     lr, pc\n"
60 			"	mov	pc, r2\n"
61 #endif
62 			"	add	sp, sp, r4\n"
63 			"	ldr	r1, [sp, #64]\n"
64 			"	tst	r1, #"__stringify(PSR_T_BIT)"\n"
65 			"	ldrne	r2, [sp, #60]\n"
66 			"	orrne	r2, #1\n"
67 			"	strne	r2, [sp, #60] @ set bit0 of PC for thumb\n"
68 			"	msr	cpsr_cxsf, r1\n"
69 			".global optprobe_template_restore_begin\n"
70 			"optprobe_template_restore_begin:\n"
71 			"	ldmia	sp, {r0 - r15}\n"
72 			".global optprobe_template_restore_orig_insn\n"
73 			"optprobe_template_restore_orig_insn:\n"
74 			"	nop\n"
75 			".global optprobe_template_restore_end\n"
76 			"optprobe_template_restore_end:\n"
77 			"	nop\n"
78 			".global optprobe_template_val\n"
79 			"optprobe_template_val:\n"
80 			"1:	.long 0\n"
81 			".global optprobe_template_call\n"
82 			"optprobe_template_call:\n"
83 			"2:	.long 0\n"
84 			".global optprobe_template_end\n"
85 			"optprobe_template_end:\n");
86 
87 #define TMPL_VAL_IDX \
88 	((unsigned long *)optprobe_template_val - (unsigned long *)optprobe_template_entry)
89 #define TMPL_CALL_IDX \
90 	((unsigned long *)optprobe_template_call - (unsigned long *)optprobe_template_entry)
91 #define TMPL_END_IDX \
92 	((unsigned long *)optprobe_template_end - (unsigned long *)optprobe_template_entry)
93 #define TMPL_ADD_SP \
94 	((unsigned long *)optprobe_template_add_sp - (unsigned long *)optprobe_template_entry)
95 #define TMPL_SUB_SP \
96 	((unsigned long *)optprobe_template_sub_sp - (unsigned long *)optprobe_template_entry)
97 #define TMPL_RESTORE_BEGIN \
98 	((unsigned long *)optprobe_template_restore_begin - (unsigned long *)optprobe_template_entry)
99 #define TMPL_RESTORE_ORIGN_INSN \
100 	((unsigned long *)optprobe_template_restore_orig_insn - (unsigned long *)optprobe_template_entry)
101 #define TMPL_RESTORE_END \
102 	((unsigned long *)optprobe_template_restore_end - (unsigned long *)optprobe_template_entry)
103 
104 /*
105  * ARM can always optimize an instruction when using ARM ISA, except
106  * instructions like 'str r0, [sp, r1]' which store to stack and unable
107  * to determine stack space consumption statically.
108  */
109 int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
110 {
111 	return optinsn->insn != NULL;
112 }
113 
114 /*
115  * In ARM ISA, kprobe opt always replace one instruction (4 bytes
116  * aligned and 4 bytes long). It is impossible to encounter another
117  * kprobe in the address range. So always return 0.
118  */
119 int arch_check_optimized_kprobe(struct optimized_kprobe *op)
120 {
121 	return 0;
122 }
123 
124 /* Caller must ensure addr & 3 == 0 */
125 static int can_optimize(struct kprobe *kp)
126 {
127 	if (kp->ainsn.stack_space < 0)
128 		return 0;
129 	/*
130 	 * 255 is the biggest imm can be used in 'sub r0, r0, #<imm>'.
131 	 * Number larger than 255 needs special encoding.
132 	 */
133 	if (kp->ainsn.stack_space > 255 - sizeof(struct pt_regs))
134 		return 0;
135 	return 1;
136 }
137 
138 /* Free optimized instruction slot */
139 static void
140 __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
141 {
142 	if (op->optinsn.insn) {
143 		free_optinsn_slot(op->optinsn.insn, dirty);
144 		op->optinsn.insn = NULL;
145 	}
146 }
147 
148 extern void kprobe_handler(struct pt_regs *regs);
149 
150 static void
151 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs)
152 {
153 	unsigned long flags;
154 	struct kprobe *p = &op->kp;
155 	struct kprobe_ctlblk *kcb;
156 
157 	/* Save skipped registers */
158 	regs->ARM_pc = (unsigned long)op->kp.addr;
159 	regs->ARM_ORIG_r0 = ~0UL;
160 
161 	local_irq_save(flags);
162 	kcb = get_kprobe_ctlblk();
163 
164 	if (kprobe_running()) {
165 		kprobes_inc_nmissed_count(&op->kp);
166 	} else {
167 		__this_cpu_write(current_kprobe, &op->kp);
168 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
169 		opt_pre_handler(&op->kp, regs);
170 		__this_cpu_write(current_kprobe, NULL);
171 	}
172 
173 	/*
174 	 * We singlestep the replaced instruction only when it can't be
175 	 * executed directly during restore.
176 	 */
177 	if (!p->ainsn.kprobe_direct_exec)
178 		op->kp.ainsn.insn_singlestep(p->opcode, &p->ainsn, regs);
179 
180 	local_irq_restore(flags);
181 }
182 NOKPROBE_SYMBOL(optimized_callback)
183 
184 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *orig)
185 {
186 	kprobe_opcode_t *code;
187 	unsigned long rel_chk;
188 	unsigned long val;
189 	unsigned long stack_protect = sizeof(struct pt_regs);
190 
191 	if (!can_optimize(orig))
192 		return -EILSEQ;
193 
194 	code = get_optinsn_slot();
195 	if (!code)
196 		return -ENOMEM;
197 
198 	/*
199 	 * Verify if the address gap is in 32MiB range, because this uses
200 	 * a relative jump.
201 	 *
202 	 * kprobe opt use a 'b' instruction to branch to optinsn.insn.
203 	 * According to ARM manual, branch instruction is:
204 	 *
205 	 *   31  28 27           24 23             0
206 	 *  +------+---+---+---+---+----------------+
207 	 *  | cond | 1 | 0 | 1 | 0 |      imm24     |
208 	 *  +------+---+---+---+---+----------------+
209 	 *
210 	 * imm24 is a signed 24 bits integer. The real branch offset is computed
211 	 * by: imm32 = SignExtend(imm24:'00', 32);
212 	 *
213 	 * So the maximum forward branch should be:
214 	 *   (0x007fffff << 2) = 0x01fffffc =  0x1fffffc
215 	 * The maximum backword branch should be:
216 	 *   (0xff800000 << 2) = 0xfe000000 = -0x2000000
217 	 *
218 	 * We can simply check (rel & 0xfe000003):
219 	 *  if rel is positive, (rel & 0xfe000000) shoule be 0
220 	 *  if rel is negitive, (rel & 0xfe000000) should be 0xfe000000
221 	 *  the last '3' is used for alignment checking.
222 	 */
223 	rel_chk = (unsigned long)((long)code -
224 			(long)orig->addr + 8) & 0xfe000003;
225 
226 	if ((rel_chk != 0) && (rel_chk != 0xfe000000)) {
227 		/*
228 		 * Different from x86, we free code buf directly instead of
229 		 * calling __arch_remove_optimized_kprobe() because
230 		 * we have not fill any field in op.
231 		 */
232 		free_optinsn_slot(code, 0);
233 		return -ERANGE;
234 	}
235 
236 	/* Copy arch-dep-instance from template. */
237 	memcpy(code, (unsigned long *)optprobe_template_entry,
238 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
239 
240 	/* Adjust buffer according to instruction. */
241 	BUG_ON(orig->ainsn.stack_space < 0);
242 
243 	stack_protect += orig->ainsn.stack_space;
244 
245 	/* Should have been filtered by can_optimize(). */
246 	BUG_ON(stack_protect > 255);
247 
248 	/* Create a 'sub sp, sp, #<stack_protect>' */
249 	code[TMPL_SUB_SP] = __opcode_to_mem_arm(0xe24dd000 | stack_protect);
250 	/* Create a 'add r3, sp, #<stack_protect>' */
251 	code[TMPL_ADD_SP] = __opcode_to_mem_arm(0xe28d3000 | stack_protect);
252 
253 	/* Set probe information */
254 	val = (unsigned long)op;
255 	code[TMPL_VAL_IDX] = val;
256 
257 	/* Set probe function call */
258 	val = (unsigned long)optimized_callback;
259 	code[TMPL_CALL_IDX] = val;
260 
261 	/* If possible, copy insn and have it executed during restore */
262 	orig->ainsn.kprobe_direct_exec = false;
263 	if (can_kprobe_direct_exec(orig->ainsn.register_usage_flags)) {
264 		kprobe_opcode_t final_branch = arm_gen_branch(
265 				(unsigned long)(&code[TMPL_RESTORE_END]),
266 				(unsigned long)(op->kp.addr) + 4);
267 		if (final_branch != 0) {
268 			/*
269 			 * Replace original 'ldmia sp, {r0 - r15}' with
270 			 * 'ldmia {r0 - r14}', restore all registers except pc.
271 			 */
272 			code[TMPL_RESTORE_BEGIN] = __opcode_to_mem_arm(0xe89d7fff);
273 
274 			/* The original probed instruction */
275 			code[TMPL_RESTORE_ORIGN_INSN] = __opcode_to_mem_arm(orig->opcode);
276 
277 			/* Jump back to next instruction */
278 			code[TMPL_RESTORE_END] = __opcode_to_mem_arm(final_branch);
279 			orig->ainsn.kprobe_direct_exec = true;
280 		}
281 	}
282 
283 	flush_icache_range((unsigned long)code,
284 			   (unsigned long)(&code[TMPL_END_IDX]));
285 
286 	/* Set op->optinsn.insn means prepared. */
287 	op->optinsn.insn = code;
288 	return 0;
289 }
290 
291 void __kprobes arch_optimize_kprobes(struct list_head *oplist)
292 {
293 	struct optimized_kprobe *op, *tmp;
294 
295 	list_for_each_entry_safe(op, tmp, oplist, list) {
296 		unsigned long insn;
297 		WARN_ON(kprobe_disabled(&op->kp));
298 
299 		/*
300 		 * Backup instructions which will be replaced
301 		 * by jump address
302 		 */
303 		memcpy(op->optinsn.copied_insn, op->kp.addr,
304 				RELATIVEJUMP_SIZE);
305 
306 		insn = arm_gen_branch((unsigned long)op->kp.addr,
307 				(unsigned long)op->optinsn.insn);
308 		BUG_ON(insn == 0);
309 
310 		/*
311 		 * Make it a conditional branch if replaced insn
312 		 * is consitional
313 		 */
314 		insn = (__mem_to_opcode_arm(
315 			  op->optinsn.copied_insn[0]) & 0xf0000000) |
316 			(insn & 0x0fffffff);
317 
318 		/*
319 		 * Similar to __arch_disarm_kprobe, operations which
320 		 * removing breakpoints must be wrapped by stop_machine
321 		 * to avoid racing.
322 		 */
323 		kprobes_remove_breakpoint(op->kp.addr, insn);
324 
325 		list_del_init(&op->list);
326 	}
327 }
328 
329 void arch_unoptimize_kprobe(struct optimized_kprobe *op)
330 {
331 	arch_arm_kprobe(&op->kp);
332 }
333 
334 /*
335  * Recover original instructions and breakpoints from relative jumps.
336  * Caller must call with locking kprobe_mutex.
337  */
338 void arch_unoptimize_kprobes(struct list_head *oplist,
339 			    struct list_head *done_list)
340 {
341 	struct optimized_kprobe *op, *tmp;
342 
343 	list_for_each_entry_safe(op, tmp, oplist, list) {
344 		arch_unoptimize_kprobe(op);
345 		list_move(&op->list, done_list);
346 	}
347 }
348 
349 int arch_within_optimized_kprobe(struct optimized_kprobe *op,
350 				unsigned long addr)
351 {
352 	return ((unsigned long)op->kp.addr <= addr &&
353 		(unsigned long)op->kp.addr + RELATIVEJUMP_SIZE > addr);
354 }
355 
356 void arch_remove_optimized_kprobe(struct optimized_kprobe *op)
357 {
358 	__arch_remove_optimized_kprobe(op, 1);
359 }
360