xref: /openbmc/linux/arch/arm/mm/proc-sa1100.S (revision f2f4bf5a) 
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 *  linux/arch/arm/mm/proc-sa1100.S
4 *
5 *  Copyright (C) 1997-2002 Russell King
6 *  hacked for non-paged-MM by Hyok S. Choi, 2003.
7 *
8 *  MMU functions for SA110
9 *
10 *  These are the low level assembler for performing cache and TLB
11 *  functions on the StrongARM-1100 and StrongARM-1110.
12 *
13 *  Note that SA1100 and SA1110 share everything but their name and CPU ID.
14 *
15 *  12-jun-2000, Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
16 *    Flush the read buffer at context switches
17 */
18#include <linux/linkage.h>
19#include <linux/init.h>
20#include <asm/assembler.h>
21#include <asm/asm-offsets.h>
22#include <asm/hwcap.h>
23#include <mach/hardware.h>
24#include <asm/pgtable-hwdef.h>
25#include <asm/pgtable.h>
26
27#include "proc-macros.S"
28
29/*
30 * the cache line size of the I and D cache
31 */
32#define DCACHELINESIZE	32
33
34	.section .text
35
36/*
37 * cpu_sa1100_proc_init()
38 */
39ENTRY(cpu_sa1100_proc_init)
40	mov	r0, #0
41	mcr	p15, 0, r0, c15, c1, 2		@ Enable clock switching
42	mcr	p15, 0, r0, c9, c0, 5		@ Allow read-buffer operations from userland
43	ret	lr
44
45/*
46 * cpu_sa1100_proc_fin()
47 *
48 * Prepare the CPU for reset:
49 *  - Disable interrupts
50 *  - Clean and turn off caches.
51 */
52ENTRY(cpu_sa1100_proc_fin)
53	mcr	p15, 0, ip, c15, c2, 2		@ Disable clock switching
54	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
55	bic	r0, r0, #0x1000			@ ...i............
56	bic	r0, r0, #0x000e			@ ............wca.
57	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
58	ret	lr
59
60/*
61 * cpu_sa1100_reset(loc)
62 *
63 * Perform a soft reset of the system.  Put the CPU into the
64 * same state as it would be if it had been reset, and branch
65 * to what would be the reset vector.
66 *
67 * loc: location to jump to for soft reset
68 */
69	.align	5
70	.pushsection	.idmap.text, "ax"
71ENTRY(cpu_sa1100_reset)
72	mov	ip, #0
73	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
74	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
75#ifdef CONFIG_MMU
76	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
77#endif
78	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
79	bic	ip, ip, #0x000f			@ ............wcam
80	bic	ip, ip, #0x1100			@ ...i...s........
81	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
82	ret	r0
83ENDPROC(cpu_sa1100_reset)
84	.popsection
85
86/*
87 * cpu_sa1100_do_idle(type)
88 *
89 * Cause the processor to idle
90 *
91 * type: call type:
92 *   0 = slow idle
93 *   1 = fast idle
94 *   2 = switch to slow processor clock
95 *   3 = switch to fast processor clock
96 */
97	.align	5
98ENTRY(cpu_sa1100_do_idle)
99	mov	r0, r0				@ 4 nop padding
100	mov	r0, r0
101	mov	r0, r0
102	mov	r0, r0				@ 4 nop padding
103	mov	r0, r0
104	mov	r0, r0
105	mov	r0, #0
106	ldr	r1, =UNCACHEABLE_ADDR		@ ptr to uncacheable address
107	@ --- aligned to a cache line
108	mcr	p15, 0, r0, c15, c2, 2		@ disable clock switching
109	ldr	r1, [r1, #0]			@ force switch to MCLK
110	mcr	p15, 0, r0, c15, c8, 2		@ wait for interrupt
111	mov	r0, r0				@ safety
112	mcr	p15, 0, r0, c15, c1, 2		@ enable clock switching
113	ret	lr
114
115/* ================================= CACHE ================================ */
116
117/*
118 * cpu_sa1100_dcache_clean_area(addr,sz)
119 *
120 * Clean the specified entry of any caches such that the MMU
121 * translation fetches will obtain correct data.
122 *
123 * addr: cache-unaligned virtual address
124 */
125	.align	5
126ENTRY(cpu_sa1100_dcache_clean_area)
1271:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
128	add	r0, r0, #DCACHELINESIZE
129	subs	r1, r1, #DCACHELINESIZE
130	bhi	1b
131	ret	lr
132
133/* =============================== PageTable ============================== */
134
135/*
136 * cpu_sa1100_switch_mm(pgd)
137 *
138 * Set the translation base pointer to be as described by pgd.
139 *
140 * pgd: new page tables
141 */
142	.align	5
143ENTRY(cpu_sa1100_switch_mm)
144#ifdef CONFIG_MMU
145	str	lr, [sp, #-4]!
146	bl	v4wb_flush_kern_cache_all	@ clears IP
147	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
148	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
149	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
150	ldr	pc, [sp], #4
151#else
152	ret	lr
153#endif
154
155/*
156 * cpu_sa1100_set_pte_ext(ptep, pte, ext)
157 *
158 * Set a PTE and flush it out
159 */
160	.align	5
161ENTRY(cpu_sa1100_set_pte_ext)
162#ifdef CONFIG_MMU
163	armv3_set_pte_ext wc_disable=0
164	mov	r0, r0
165	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
166	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
167#endif
168	ret	lr
169
170.globl	cpu_sa1100_suspend_size
171.equ	cpu_sa1100_suspend_size, 4 * 3
172#ifdef CONFIG_ARM_CPU_SUSPEND
173ENTRY(cpu_sa1100_do_suspend)
174	stmfd	sp!, {r4 - r6, lr}
175	mrc	p15, 0, r4, c3, c0, 0		@ domain ID
176	mrc	p15, 0, r5, c13, c0, 0		@ PID
177	mrc	p15, 0, r6, c1, c0, 0		@ control reg
178	stmia	r0, {r4 - r6}			@ store cp regs
179	ldmfd	sp!, {r4 - r6, pc}
180ENDPROC(cpu_sa1100_do_suspend)
181
182ENTRY(cpu_sa1100_do_resume)
183	ldmia	r0, {r4 - r6}			@ load cp regs
184	mov	ip, #0
185	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
186	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
187	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
188	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
189
190	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
191	mcr	p15, 0, r1, c2, c0, 0		@ translation table base addr
192	mcr	p15, 0, r5, c13, c0, 0		@ PID
193	mov	r0, r6				@ control register
194	b	cpu_resume_mmu
195ENDPROC(cpu_sa1100_do_resume)
196#endif
197
198	.type	__sa1100_setup, #function
199__sa1100_setup:
200	mov	r0, #0
201	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches on v4
202	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer on v4
203#ifdef CONFIG_MMU
204	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
205#endif
206	adr	r5, sa1100_crval
207	ldmia	r5, {r5, r6}
208	mrc	p15, 0, r0, c1, c0		@ get control register v4
209	bic	r0, r0, r5
210	orr	r0, r0, r6
211	ret	lr
212	.size	__sa1100_setup, . - __sa1100_setup
213
214	/*
215	 *  R
216	 * .RVI ZFRS BLDP WCAM
217	 * ..11 0001 ..11 1101
218	 *
219	 */
220	.type	sa1100_crval, #object
221sa1100_crval:
222	crval	clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
223
224	__INITDATA
225
226/*
227 * SA1100 and SA1110 share the same function calls
228 */
229
230	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
231	define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1
232
233	.section ".rodata"
234
235	string	cpu_arch_name, "armv4"
236	string	cpu_elf_name, "v4"
237	string	cpu_sa1100_name, "StrongARM-1100"
238	string	cpu_sa1110_name, "StrongARM-1110"
239
240	.align
241
242	.section ".proc.info.init", #alloc
243
244.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
245	.type	__\name\()_proc_info,#object
246__\name\()_proc_info:
247	.long	\cpu_val
248	.long	\cpu_mask
249	.long   PMD_TYPE_SECT | \
250		PMD_SECT_BUFFERABLE | \
251		PMD_SECT_CACHEABLE | \
252		PMD_SECT_AP_WRITE | \
253		PMD_SECT_AP_READ
254	.long   PMD_TYPE_SECT | \
255		PMD_SECT_AP_WRITE | \
256		PMD_SECT_AP_READ
257	initfn	__sa1100_setup, __\name\()_proc_info
258	.long	cpu_arch_name
259	.long	cpu_elf_name
260	.long	HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
261	.long	\cpu_name
262	.long	sa1100_processor_functions
263	.long	v4wb_tlb_fns
264	.long	v4_mc_user_fns
265	.long	v4wb_cache_fns
266	.size	__\name\()_proc_info, . - __\name\()_proc_info
267.endm
268
269	sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name
270	sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name
271